The influence of nanostructure and electrolyte concentration on the performance of nickel sulfide (Ni3S2) catalyst for electrochemical overall water splitting

Developing non-precious nanostructured electrocatalysts, exhibiting high catalytic activity in combination with excellent stability, has an enormous potential to replace noble-metal-based catalysts for Hydrogen production through electrochemical water splitting. In this study, a facile method is used for the synthesis of three different hierarchical nanostructures of nickel sulfide (Ni3S2) including nanosheets, nanorods, and multiconnected nanorods that are directly grown on 3D nickel foam (NF). These nanostructured electrocatalysts are evaluated for electrochemical water splitting in alkaline media using four different concentrations to understand the effect of nanostructure and ion concentration on the efficiency. Among different combinations of structure and electrolyte concentration, the Ni3S2 in the form of nanosheets exhibited the best electrocatalytic performance for hydrogen evolution reaction (HER) as well as oxygen evolution reaction (OER) in 3.0 M alkaline solution. The hierarchical Ni3S2 nanosheets exhibited a high electrochemically active surface area, which facilitated the charge transport phenomenon along the electrode-electrolyte interface in a higher electrolyte concentration that improved the reaction kinetics so as overall water splitting. The developed Ni3S2 nanosheets required an overpotential of 110 mV (@10 mA cm-2) and 211 mV (@100 mA cm-2) for HER and OER, respectively in 3.0 M electrolyte concentration. This work provides insight into how the materials' nanostructures and electrolyte concentration could be utilized to improve the electrocatalytic performance for an overall water-splitting process, and the concept could be applied for material designing and conditions optimization for other catalytic applications.

Low-temperature molten salt synthesis and catalytic mechanism of CoS2/NC as an advanced bifunctional electrocatalyst

The development of productive and sustainable bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) plays an important role in the commercial evolution of metal-air batteries. In this paper, a low-temperature molten salt template method was adopted to synthesize the composite of CoS₂ and nitrogen-doped carbon (CoS₂/NC) without the protection of inert gas. The structural characterization studies show that the specific surface area (SSA) and crystal growth kinetics are increased and effectively improved, respectively, by the composite of CoS₂ and NC. The as-synthesized CoS₂/NC composite demonstrates outstanding bifunctional catalytic activity in alkaline electrolytes and exhibits a half-wave potential (E_1/2) of 0.854 V (vs. RHE) and an overpotential of only 220 mV for the OER at a current density of 10 mA cm^-2 (η₁₀). Simultaneously, CoS₂/NC also exhibits excellent electrochemical stability. Additionally, density functional theory (DFT) calculations have manifested that the synergistic effect of CoS₂ and NC results in a remarkable enhancement in the bifunctional catalytic performance of the composite materials. This study offers a new pathway and theoretical guidance for the fabrication of efficient bifunctional electrocatalysts.

Low-dimensional transition metal sulfide-based electrocatalysts for water electrolysis: overview and perspectives

Hydrogen prepared by electrocatalytic decomposition of water ("green hydrogen") has the advantages of high energy density and being clean and pollution-free, which is an important energy carrier to face the problems of the energy crisis and environmental pollution. However, the most used commercial electrocatalysts are based on expensive and scarce precious metals and their alloy materials, which seriously restricts the large-scale industrial application of hydrogen energy. The development of efficient non-precious metal electrocatalysts is the key to achieving the sustainable development of the hydrogen energy industry. Transition metal sulfides (TMS) have become popular non-precious metal electrocatalysts with great application potential due to their large specific surface area, unique electronic structure, and rich regulatory strategies. To further improve their catalytic activities for practical application, many methods have been tried in recent years, including control of morphology and crystal plane, metal/nonmetal doping, vacancy engineering, building of self-supporting electrocatalysts, interface engineering, etc. In this review, we introduce firstly the common types of TMS and their preparation. Additionally, we summarize the recent developments of the many different strategies mentioned above for efficient water electrolysis applications. Furthermore, the rationales behind their enhanced electrochemical performances are discussed. Lastly, the challenges and future perspectives are briefly discussed for TMS-based water dissociation catalysts.

Waste-Derived Catalysts for Water Electrolysis: Circular Economy-Driven Sustainable Green Hydrogen Energy

The sustainable production of green hydrogen via water electrolysis necessitates cost-effective electrocatalysts. By following the circular economy principle, the utilization of waste-derived catalysts significantly promotes the sustainable development of green hydrogen energy. Currently, diverse waste-derived catalysts have exhibited excellent catalytic performance toward hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water electrolysis (OWE). Herein, we systematically examine recent achievements in waste-derived electrocatalysts for water electrolysis. The general principles of water electrolysis and design principles of efficient electrocatalysts are discussed, followed by the illustration of current strategies for transforming wastes into electrocatalysts. Then, applications of waste-derived catalysts (i.e., carbon-based catalysts, transitional metal-based catalysts, and carbon-based heterostructure catalysts) in HER, OER, and OWE are reviewed successively. An emphasis is put on correlating the catalysts' structure-performance relationship. Also, challenges and research directions in this booming field are finally highlighted. This review would provide useful insights into the design, synthesis, and applications of waste-derived electrocatalysts, and thus accelerate the development of the circular economy-driven green hydrogen energy scheme.

One-Pot Synthesis of CoS2 Merged in Polymeric Carbon Nitride Films for Photoelectrochemical Water Splitting

Polymeric carbon nitride (PCN) has attracted intensive interest as sustainable, metal-free semiconductor for photoelectrochemical (PEC) water splitting. Charge transfer along the films acts as the main concern to restrict the performance due to the amorphous nature of polymer. Herein, gradient concentration of cobalt disulfide (CoS₂ ) merged in PCN films was realized as CSCN photoanode by a one-pot synthesis. Owing to the unique properties of CoS₂ , namely high conductivity, the charge transfer of the CSCN photoanode was promoted, and thus the performance for PEC water oxidation was improved. The optimal photoanode exhibited a photoanodic current of 200 μA cm^-2 at 1.23 V versus reversible hydrogen electrode under air mass 1.5 global (AM 1.5G) illumination, which was approximately 4 times that of the pristine PCN photoanode. This work provides a new design of metal-free photoanodes to improve the performance of water splitting.

Porous CoSe2@N-doped carbon nanowires: an ultra-high stable and large-current-density oxygen evolution electrocatalyst

Nitrogen doped carbon functionalized CoSe₂ nanowires (CoSe₂@N-C NWs), which act as potential oxygen evolution reaction (OER) catalysts with a large current density and high stability have been reported. Owing to the collaborative optimization of electrical conductivity, free adsorption energy and binding strength of OER intermediates, the prepared CoSe₂@N-C NWs exhibit an enhanced 6.61-fold catalytic activity compared to the pristine CoSe₂ NW electrode in 1.0 M KOH solution at the overpotential of 340 mV.

Hydrothermal Synthesis of Polyhedral Nickel Sulfide by Dual Sulfur Source for Highly-Efficient Hydrogen Evolution Catalysis

Transition metal sulfides are cheap and efficient catalysts for water splitting to produce hydrogen; these compounds have attracted wide attention. Nickel sulfide (NiS₂) has been studied in depth because of its simple preparation process, excellent performance and good stability. Here, we propose a modification to the hydrothermal synthesis method for the fabrication of a highly efficient and stable NiS₂ electrocatalyst prepared by two different sulfur sources, i.e., sulfur powder and C₃H₇NaO₃S₂ (MPS), for application in hydrogen evolution reactions. The obtained NiS₂ demonstrated excellent HER performance with an overpotential of 131 mV to drive -10 mA cm^-1 in 0.5 M H₂SO₄ solution with 5mV performance change after 1000 cycles of stability testing. We believe that this discovery will promote the industrial development of nonprecious metal catalysts.

Reaction probability and kinetics of water splitting on the penta-NiAs2 monolayer from an ab initio molecular dynamics investigation

The reaction probability and kinetics of the water splitting process on the penta-NiAs2 monolayer are studied using ab initio molecular dynamics simulations. A total of 100 trajectories are investigated, in which a H2O molecule is set to strike the surface with a translational energy of 1 eV or 2 eV. The results show that the NiAs2 monolayer is an excellent candidate for the activation of water splitting with a reaction probability of 94% for both energy levels. Interestingly, the kinetics of two O-H dissociation stages varies greatly with respect to the inletting translational energy. Interpreting the reaction data for the 1 eV case, we conclude that O-H1 and O-H2 dissociations are first-order processes. However, such dissociation steps become pseudo-zeroth order in the 2 eV case. At the time of the dissociation, the force acting on atoms and the principal component analysis suggest that the two OH breaking stages behave like harmonic springs until reaching the dissociation.

Conversion of Co Nanoparticles to CoS in Metal-Organic Framework-Derived Porous Carbon during Cycling Facilitates Na2S Reactivity in a Na-S Battery

Room-temperature sodium-sulfur batteries have attracted wide interest due to their high energy density and high natural abundance. Polysulfide dissolution and irreversible Na₂S conversion are challenges to achieving high battery performance. Herein, we utilize a metal-organic framework-derived Co-containing nitrogen-doped porous carbon (CoNC) as a catalytic sulfur cathode host. A concentrated sodium electrolyte based on sodium bis(fluorosulfonyl)imide, dimethoxyethane, and bis(2,2,2-trifluoroethyl) ether is used to mitigate polysulfide dissolution. We tune the amount of Co present in the CoNC carbon host by acid washing. Significant improvement in reversible sulfur conversion and capacity retention is observed with a higher Co content in CoNC, with 600 mAh g^-1 and 77% capacity retention for CoNC and 261 mAh g^-1 and 56% capacity retention for acid-washed CoNC at cycle 50 at 80 mAh g^-1. Post-mortem X-ray photoelectron spectroscopy, transmission electron microscopy, and selected area electron diffraction suggest that CoS is formed during cycling in place of Co nanoparticles and CoN₄ sites. Raman spectroscopy suggests that CoS exhibits a catalytic effect on the oxidation of Na₂S. Our findings provide insights into understanding the role Co-based catalysts play in sulfur batteries.

Ultrathin rGO-wrapped free-standing bimetallic CoNi2S4-carbon nanofibers: an efficient and robust bifunctional electrocatalyst for water splitting

Electrochemical water splitting represents an ideal strategy for producing clean hydrogen as an energy carrier that serves as an alternative to fossil fuels. As an effective method for hydrogen production, an efficient inexpensive multifunctional electrocatalyst with high durability is designed. Herein, we describe the heterostructural design of a three-dimensional catalytic network with self-embedded CoNi₂S₄ nanograins grown on electrospun carbon nanofibers (CoNi₂S₄-CNFs) with anchored thin-layer reduced graphene oxide. This is achieved via facile electrospinning followed by carbonization, low-temperature sulfidation, and surface functionalization. As a bifunctional catalyst, CoNi₂S₄-CNFs exhibited robust high activity toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in an alkaline medium. The anchored ultrathin graphene oxide layer promoted the stability and durability of the catalytic network with an efficient path for the transportation of electrons. The rGO-anchored CoNi₂S₄-CNFs yielded overpotential values of 228 mV and 205 mV for the HER and OER, respectively, that drives a current density of 20 mA cm^-2 in an alkaline medium. Notably, the excellent electrochemical properties are attributed to the functional effect of the CoNi₂S₄ on the CNF network. The ultrathin feature of rGO improved the durability of the catalytic network. Moreover, using the rGO-anchored CoNi₂S₄-CNFs as a cathode and anode in a two-electrode water splitting system required a cell voltage of only 1.55 V to reach a current density of 10 mA cm^-2. These CNFs exhibited outstanding durability for 48 h. The present work offers new insight for the design of a catalytic network with a non-noble metal catalyst that exhibits excellent electrocatalytic activity and durability on the metal sulfides in overall water splitting.

Strong hydrophilicity NiS2/Fe7S8 heterojunctions encapsulated in N-doped carbon nanotubes for enhanced oxygen evolution reaction

The construction of active sites with excellent water oxidation activity is of great significance in the design of OER electrocatalysts.

A flower-like CoS2/MoS2 heteronanosheet array as an active and stable electrocatalyst toward the hydrogen evolution reaction in alkaline media

CoS₂/MoS₂ heteronanosheet arrays (HNSAs) with vertically aligned flower-like architectures are fabricated through in situ topotactic sulfurization of CoMoO₄ nanosheet array (NSA) precursors on conductive Ni foam. CoMoO₄ NSAs are prepared by a self-template hydrothermal method without using any hard template and surfactant. Benefiting from a 3D flower-like architecture constituted by ultrathin nanosheets with abundant exposed heterointerfaces as highly active sites and predesigned void spaces, the as-synthesized CoS₂/MoS₂ HNSAs exhibit an excellent hydrogen evolution reaction (HER) performance with a low overpotential of 50 mV at 10 mA cm⁻², and a small Tafel slope of 76 mV dec⁻¹ in 1.0 M KOH, which outperforms most previously reported CoS₂ and MoS₂ based electrocatalysts with compositional or morphological similarity. This work demonstrates the great potential in developing high-efficiency and earth-abundant electrocatalysts for alkaline HER through heterointerface engineering and morphological design by utilizing transition metal molybdate as a promising platform.

CoS₂/MoS₂ heteronanosheet arrays with vertically aligned flower-like architecture are fabricated through in situ topotactic sulfurization of CoMoO₄ nanosheet arrays.

Metal-organic Framework-driven Porous Cobalt Disulfide Nanoparticles Fabricated by Gaseous Sulfurization as Bifunctional Electrocatalysts for Overall Water Splitting

Both high activity and mass production potential are important for bifunctional electrocatalysts for overall water splitting. Catalytic activity enhancement was demonstrated through the formation of CoS2 nanoparticles with mono-phase and extremely porous structures. To fabricate porous structures at the nanometer scale, Co-based metal-organic frameworks (MOFs), namely a cobalt Prussian blue analogue (Co-PBA, Co3[Co(CN)6]2), was used as a porous template for the CoS2. Then, controlled sulfurization annealing converted the Co-PBA to mono-phase CoS2 nanoparticles with ~ 4 nm pores, resulting in a large surface area of 915.6 m2 g-1. The electrocatalysts had high activity for overall water splitting, and the overpotentials of the oxygen evolution reaction and hydrogen evolution reaction under the operating conditions were 298 mV and -196 mV, respectively, at 10 mA cm-2.

Direct Growth of CNTs@CoSx Se2(1-x) on Carbon Cloth for Overall Water Splitting

Searching for low-cost, high-efficiency, bifunctional, non-noble-metal electrocatalysts for overall water splitting is crucial to renewable energy conversion. Herein, a series of component-controllable CC/CNTs@CoS_x Se_2(1-x) (CC: carbon cloth, CNT: carbon nanotube) with excellent bifunctional properties in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) were obtained by chemical vapor deposition. In this strategy, the Zif-67 precursor served as a structural inducer, which was directly grown on CC and pyrolyzed with the assistance of melamine to form multi-walled CNT-encapsulated CoS_x Se_2(1-x) hierarchical nanostructures. Subsequently, the electrocatalytic properties of the as-prepared materials were optimized by adjusting the S/Se molar ratio. Of note is that the lattice distortion caused by the different radii of Se and S generated a polarized electric field for easy adsorption of the intermediate products. The CoOOH generated in situ on the surface of CoS_x Se_2(1-x) , as well as n- and p-type domains in carbon, synergistically resulted in abundant active sites to boost the electrocatalytic activity. CC/CNTs@CoS_0.74 Se_0.52 exhibited overpotentials for the HER and OER of 225 and 285 mV, respectively and attained a current density of 10 mA cm^-2 in alkaline solution. The as-prepared electrocatalysts could act as both cathode and anode in a water electrolyzer showing a cell voltage of 1.74 V and delivering 10 mA cm^-2 , comparable to those of noble-metal-based water electrolyzers.

Contemporaneous oxidation state manipulation to accelerate intermediate desorption for overall water electrolysis

Simultaneous oxidation state engineering of Co, N and S for cobalt nitride and sulfide electrocatalysts is demonstrated to facilitate intermediate desorption for OER and HER, leading to efficient overall water electrolysis in a neutral buffer electrolyte.