Proximity-induced hybridization chain assembly with small-molecule linked DNA for single-step amplified detection of antibodies

Bispecific Antibody Detection Using Antigen-Conjugated Synthetic Nucleic Acid Strands

We report here the development of two different sensing strategies based on the use of antigen-conjugated nucleic acid strands for the detection of a bispecific antibody against the tumor-related proteins Mucin1 and epidermal growth factor receptor. Both approaches work well in serum samples (nanomolar sensitivity), show high specificity against the two monospecific antibodies, and are rapid. The results presented here demonstrate the versatility of DNA-based platforms for the detection of bispecific antibodies and could represent a versatile alternative to other more reagent-intensive and time-consuming analytical approaches.

Chemiluminescent screening of specific hybridoma cells via a proximity-rolling circle activated enzymatic switch

The mass-production capability of hybridoma technology is bottlenecked by the routine screening procedure which is time-consuming and laborious as the requirement of clonal expansion. Here, we describe a 1-day chemiluminescent screening protocol for specific hybridoma cells on conventional 96-well plate via a proximity-rolling circle activated enzymatic switch (P-RCAES) strategy. The P-RCAES uses a pair of antigen-DNA probes to recognize secreted specific antibody and proximity-induce rolling circle amplification for mass-production of pyrophosphate to activate Cu(II) inhibited horseradish peroxidase and generate a strong chemiluminescent signal. The P-RCAES based homogeneous chemiluminescent assay can detect antibody down to 18 fM, and enables the screening of specific hybridoma cells secreting PCSK9 antibody at single-cell level without tedious cloning process. The proposed fast screening protocol has good expansibility without need of sophisticated instruments, and provides a screening method for greatly improving the efficiency of hybridoma technology.

In order to realize fast screening of specific hybridoma cells in hybridoma technology, a 1-day chemiluminescent screening method is reported on common 96-well plate via a proximity-rolling circle activated enzymatic switch strategy.

Target biorecognition-triggered assembly of a G-quadruplex DNAzyme-decorated nanotree for the convenient and ultrasensitive detection of antibiotic residues

The abuse of kanamycin (Kana) in many fields has led to increasing antibiotic pollution problems and serious threats to public health. Therefore, determining how to develop methods to realize the convenient detection of antibiotics in complicated environmental matrices is highly desirable. In this study, we utilized a target biorecognition-triggered hybridization chain reaction (HCR) assembly of a G-quadruplex DNAzyme (G-DNAzyme)-decorated nanotree to develop a novel homogeneous colorimetric biosensing method for the convenient and ultrasensitive detection of Kana antibiotic residues in real samples. Through the designed aptamer-recognition reaction, an Mg²⁺-dependent DNAzyme (MNAzyme) strand can be liberated. Thus, its catalyzed cleavage of the hairpin substrates anchored at a DNA nanowire will cause the assembled formation of an HCR-initiator; this process can be greatly amplified by the exonuclease III-assisted target recycling and the MNAzyme-catalyzed release of another MNAzyme strand. Based on the DNA-nanowire-accelerated HCR assembly of many G-DNAzyme-decorated DNA duplexes on the two sides of the nanowire, a DNA nanotree decorated by numerous G-DNAzymes will form to realize the ultrasensitive colorimetric signal output. Under the optimal conditions, this method exhibited a wide five-order-of-magnitude linear range and a very low detection limit of 28 fg mL^-1. In addition, excellent selectivity, repeatability, and reliability were also demonstrated for this homogeneous bioassay method. These unique features along with its automatic manipulation and low assay cost show promise for practical applications.

Development of the DNA-based biosensors for high performance in detection of molecular biomarkers: More rapid, sensitive, and universal

The molecular biomarkers are molecules that are closely related to specific physiological states. Numerous molecular biomarkers have been identified as targets for disease diagnosis and biological research. To date, developing highly efficient probes for the precise detection of biomarkers has become an attractive research field which is very important for biological and biochemical studies. During the past decades, not only the small chemical probe molecules but also the biomacromolecules such as enzymes, antibodies, and nucleic acids have been introduced to construct of biosensor platform to achieve the detection of biomarkers in a highly specific and highly efficient way. Nevertheless, improving the performance of the biosensors, especially in clinical applications, is still in urgent demand in this field. A noteworthy example is the Corona Virus Disease 2019 (COVID-19) that breaks out globally in a short time in 2020. The COVID-19 was caused by the virus called SARS-CoV-2. Early diagnosis is very important to block the infection of the virus. Therefore, during these months scientists have developed dozens of methods to achieve rapid and sensitive detection of the virus. Nowadays some of these new methods have been applied for producing the commercial detection kit and help people against the disease worldwide. DNA-based biosensors are useful tools that have been widely applied in the detection of molecular biomarkers. The good stability, high specificity, and excellent biocompatibility make the DNA-based biosensors versatile in application both in vitro and in vivo. In this paper, we will review the major methods that emerged in recent years on the design of DNA-based biosensors and their applications. Moreover, we will also briefly discuss the possible future direction of DNA-based biosensors design. We believe this is helpful for people interested in not only the biosensor field but also in the field of analytical chemistry, DNA nanotechnology, biology, and disease diagnosis.

Label-Free Fluorescence Molecular Beacon Probes Based on G-Triplex DNA and Thioflavin T for Protein Detection

Protein detection plays an important role in biological and biomedical sciences. The immunoassay based on fluorescence labeling has good specificity but a high labeling cost. Herein, on the basis of G-triplex molecular beacon (G3MB) and thioflavin T (ThT), we developed a simple and label-free biosensor for protein detection. The biotin and streptavidin were used as model enzymes. In the presence of target streptavidin (SA), the streptavidin hybridized with G3MB-b (biotin-linked-G-triplex molecular beacon) perfectly and formed larger steric hindrance, which hindered the hydrolysis of probes by exonuclease III (Exo III). In the absence of target streptavidin, the exonuclease III successively cleaved the stem of G3MB-b and released the G-rich sequences which self-assembled into a G-triplex and subsequently activated the fluorescence signal of thioflavin T. Compared with the traditional G-quadruplex molecular beacon (G4MB), the G3MB only needed a lower dosage of exonuclease III and a shorter reaction time to reach the optimal detection performance, because the concise sequence of G-triplex was good for the molecular beacon design. Moreover, fluorescence experiment results exhibited that the G3MB-b had good sensitivity and specificity for streptavidin detection. The developed label-free biosensor provides a valuable and general platform for protein detection.

Dual-readout proximity hybridization-regulated and photothermally amplified protein analysis based on MXene nanosheets

Herein, an ingenious dual-readout sensing platform based on a proximity hybridization-regulated strategy is proposed for protein detection. For the first time, Ti₃C₂ MXene@thionine composites (MXene@Thi) with an excellent photothermal effect not only acted as an amplifier to enhance the electrochemical signal, but were also used as a converter to achieve the temperature readout.

Highly sensitive detection of cancer cells via split aptamer mediated proximity-induced hybridization chain reaction

Highly sensitive detection of cancer cells is of great importance for evaluating cancer development and improving survival rates. Here, we developed a split aptamer mediated proximity-induced hybridization chain reaction (HCR) strategy to meet this purpose. In this strategy, two split aptamer initiator probes, Sp-a and Sp-b, and two HCR hairpin probes, H1 and H2 were designed. The split aptamer initiator probes contained two components, split aptamer domains being responsible for target recognition, and the split initiator parts serving as the HCR promoter. In the presence of target cells, Sp-a and Sp-b would self-assemble on the cell surfaces, allowing the formation of an intact nicked initiator to activate the HCR reaction. Benefit from low background split aptamers and HCR amplification, this strategy presented high sensitivity in quantitative detection with a detection limit of 18 cells in 150 μL of binding buffer. Moreover, the approach exhibited excellent specificity to target cells in 10% fetal bovine serum and mixed cell samples, which was favorable for clinical diagnosis in complex biological environment. In addition, by changing the split aptamers attached to the split initiator, the proposed strategy can be expanded to detect various kinds of target cells. It may provide a novel and useful applicable platform for the sensitive detection of cancer cells in biomedicine and tumor-related studies.

Programming DNA-Based Systems through Effective Molarity Enforced by Biomolecular Confinement

The fundamental concept of effective molarity is observed in a variety of biological processes, such as protein compartmentalization within organelles, membrane localization and signaling paths. To control molecular encountering and promote effective interactions, nature places biomolecules in specific sites inside the cell in order to generate a high, localized concentration different from the bulk concentration. Inspired by this mechanism, scientists have artificially recreated in the lab the same strategy to actuate and control artificial DNA-based functional systems. Here, it is discussed how harnessing effective molarity has led to the development of a number of proximity-induced strategies, with applications ranging from DNA-templated organic chemistry and catalysis, to biosensing and protein-supported DNA assembly.

Proximity-enabled bidirectional enzymatic repairing amplification for ultrasensitive fluorescence sensing of adenosine triphosphate

A novel fluorescence sensing strategy for ultrasensitive and highly specific detection of adenosine triphosphate (ATP) has been developed by the combination of the proximity ligation assay with bidirectional enzymatic repairing amplification (BERA). The strategy relies on proximity binding-triggered the release of palindromic tail that initiates bidirectional cyclic enzymatic repairing amplification reaction with the aid of polymerase and two DNA repairing enzymes, uracil-DNA glycosylase (UDG) and endonuclease IV (Endo IV). A fluorescence-quenched hairpin probe with a palindromic tail at the 3' end is skillfully designed that functions as not only the recognition element, primer, and polymerization template for BERA but also the indicator for fluorescence signal output. On the basis of the amplification strategy, this biosensor displays excellent sensitivity and selectivity for ATP detection with an outstanding detection limit of 0.81 pM. Through simultaneously enhancing the target response signal value and reducing nonspecific background, this work deducted the background effect, and showed high sensitivity and reproducibility. Moreover, our biosensor also shows promising potential in real sample analysis. Therefore, the proximity-enabled BERA strategy indeed creates a simple and valuable fluorescence sensing platform for ATP identification and related disease diagnosis and biomedical research.

Orthogonal regulation of DNA nanostructure self-assembly and disassembly using antibodies

Here we report a rational strategy to orthogonally control assembly and disassembly of DNA-based nanostructures using specific IgG antibodies as molecular inputs. We first demonstrate that the binding of a specific antibody to a pair of antigen-conjugated split DNA input-strands induces their co-localization and reconstitution into a functional unit that is able to initiate a toehold strand displacement reaction. The effect is rapid and specific and can be extended to different antibodies with the expedient of changing the recognition elements attached to the two split DNA input-strands. Such an antibody-regulated DNA-based circuit has then been employed to control the assembly and disassembly of DNA tubular structures using specific antibodies as inputs. For example, we demonstrate that we can induce self-assembly and disassembly of two distinct DNA tubular structures by using DNA circuits controlled by two different IgG antibodies (anti-Dig and anti-DNP antibodies) in the same solution in an orthogonal way.

Antibodies are useful biomarkers and are emerging as powerful therapeutic tools. Here the authors report a rational strategy to orthogonally control assembly and disassembly of DNA-based nanostructures using specific IgG antibodies as molecular inputs.