Chiroptical Recognition of Carboxylates with Charge-Neutral Double-Stranded Zinc(II) Helicates

Chirality analysis of small molecules for the determination of their enantiopurity is nowadays ruled by streamlined chromatographic methods which utilize chiral stationary phases. Chiroptical probes which rely on host-guest interactions are so far overshadowed by the latter but have the benefit of depending only on common spectroscopic techniques such as CD spectroscopy to distinguish enantiomers and to quantify their ratio. Interest into this receptor-based approach is constantly rising because non-invasive high-throughput screenings with a minimal waste production can be performed. In this study we investigate the possibility to utilize metal-based containers in form of charge-neutral helicates able to recognize anions for this purpose. Key building block of the helicates are triazole units which show rotational freedom and give rise to either a meso-structure or a racemic mixture of the right- and left-handed complex. A chiroptical response of the probe is observed upon recognition of chiral mono- or dicarboxylates and chirality analysis of tartrate is conducted by CD spectroscopy.

Recent advances of optically active helical polymers as adsorbents and chiral stationary phases for chiral resolution

Chiral resolution is very important and still a big challenge due to different biological activity and same physicochemical property of one pair (R)- and (S)-isomer. There is no doubt that chiral selectors are essentially needed for chiral resolution, which can stereoselectively interact with a pair of isomers. To date, a large amount of optically active helical polymers as chiral selectors have been synthesized via two strategies. First, the target helical polymers are derived from natural polysaccharide such as cellulose and amylose. Second, they can be synthesized by polymerization of chiral monomers. Alternatively, an achiral polymer is prepared first followed by static or dynamic chiral induction. Furthermore, a part of them is harnessed as chiral stationary phases for chromatographic chiral separation and as chiral adsorbents for enantioselective adsorption/crystallization, resulting in good enantioseparation efficiency. In summary, the present review will focus on recent progress of the polymers with optical activity for chiral resolution, especially the literature published in the past 10 years. In addition, development prospects and future challenges of optically active helical polymers will be discussed in detail.

Rapid Access to Chiral and Tripodal Cavitands from β-Pinene

We report Pd-catalyzed cyclotrimerization of (+)-α-bromoenone, obtained from monoterpene β-pinene, into an enantiopure cyclotrimer. This C₃ symmetric compound has three bicyclo[3.1.1]heptane rings fused to its central benzene with each ring carrying a carbonyl group. The cyclotrimer undergoes diastereoselective threefold alkynylation with the lithium salts of five terminal alkynes (41-63 %, de=4-83 %). The addition enabled a rapid synthesis of a small library of novel chiral cavitands that, in shape, resemble a tripod stand. These molecular tripods include a tris-bicycloannelated benzene head attached to three alkyne legs twisted in one direction to form a nonpolar cavity with polar groups as feet. Tripods with methylpyridinium and methylisoquinolinium legs, respectively, form inclusion complexes with anti-inflammatory and chiral drugs (R)/(S)-ibuprofen and (R)/(S)-naproxen. The mode of binding shows drug molecules docked in the cavity of the host through ion-ion, cation-π, and C-H-π contacts that, in addition of desolvation, give rise to complexes having millimolar to micromolar stability in water. Our findings open the door to creating a myriad of enantiopure tripods with tunable functions that, in the future, might give novel chemosensors, catalysts or sequestering agents.

Chiral Recognition of Hydantoin Derivatives Enabled by Tetraaza Macrocyclic Chiral Solvating Agents Using 1H NMR Spectroscopy

Enantiomers of a series of hydantoin derivatives were prepared from d- and l-amino acids with p-tolyl isocyanate and 3,5-bis(trifluoromethyl)phenyl isocyanate as guests for chiral recognition by ¹H NMR spectroscopy. Meanwhile, several tetraaza macrocyclic compounds were synthesized as chiral solvating agents from d-phenylalanine and (1S,2S)-(+)-1,2-diaminocyclohexane. An uncommon enantiomeric discrimination has been successfully established for hydantoin derivatives, representatives of five-membered N,N-heterocycles, in the presence of tetraaza macrocyclic chiral solvating agents (TAMCSAs) 1a-1c by means of ¹H NMR spectroscopy. Several unprecedented nonequivalent chemical shifts (up to 1.309 ppm) were observed in the split ¹H NMR spectra. To evaluate practical applications in the determination of enantiomeric excess (ee), the ee values of samples with different optical purities (up to 95% ee) were accurately calculated by the integration of relevant proton peaks. To better understand the chiral discriminating behavior, Job plots of (±)-G1 with TAMCSA 1a were investigated. Furthermore, in order to further explore any underlying intermolecular hydrogen bonding interactions, theoretical calculations of the enantiomers of (S)-G1 and (R)-G1 with TAMCSA 1a were performed by means of the hybrid density functional theory (B3LYP/6-31G*) of the Gaussian 16 program.

Indicator displacement assays: from concept to recent developments

Overcoming the synthetic burden related to covalently connected receptors with appropriate indicators for sensing various analytes via an indicator spacer receptor (ISR) approach, the indicator displacement assay (IDA) seems to be a very sophisticated and versatile supramolecular sensing paradigm, and it has taken the phenomenon of molecular recognition to the next level in the realm of host-guest chemistry. Due to the unavailability of a comprehensive report on what has been done in the last decade in relation to IDAs, we decided to set down this account illustrating diverse indicator displacement assays (IDAs) in detail from the concept stage to recent developments relating to the detection of cationic, anionic, and neutral analytes. The authors conclude this account with future perspectives and highlight the limitations and challenges relating to IDAs which need to be overcome in order to realize the full potential of this popular sensing phenomenon. While we were finalizing our account for publication, a tutorial review by the research groups of Anslyn, Sessler, and Sun was published, which focuses mainly on diverse aspects of the chemistry related to IDAs. As can be seen, our review, besides discussing various basic IDA concepts, has a vast collection of information published in the past decade and hence, hopefully, will be very informative for the supramolecular community. We believe that this work will offer new insights for the construction of novel sensors operating through the IDA approach.

Rapid organocatalytic chirality analysis of amines, amino acids, alcohols, amino alcohols and diols with achiral iso(thio)cyanate probes

The widespread occurrence and significance of chiral compounds does not only require new methods for their enantioselective synthesis but also efficient tools that allow rapid determination of the absolute configuration, enantiomeric composition and overall concentration of nonracemic mixtures. Although chiral analysis is a frequently encountered challenge in the chemical, environmental, materials and health sciences it is typically addressed with slow and laborious chromatographic or NMR spectroscopic techniques. We now show with almost 40 analytes representing 5 different compound classes, including mono-alcohols which are particularly challenging sensing targets, that this task can be solved very quickly by chiroptical sensing with a single, readily available arylisocyanate probe. The probe reacts smoothly and irreversibly with amino and alcohol groups when an organocatalyst is used at room temperature toward urea or carbamate products exhibiting characteristic UV and CD signals above 300 nm. The UV signal induction is not enantioselective and correlated to the total concentration of both enantiomers, the concomitant generation of a CD band allows determination of the enantiomeric composition from the same sample, and the sense of the induced Cotton effect reveals the absolute configuration by comparison with a reference. This approach eliminates complications that can arise when enantiomerically impure NMR derivatizing agents are used and it outperforms time-consuming HPLC protocols. The generation of distinct UV and CD signals at high wavelengths overcomes issues with insufficient resolution of overlapping signals often encountered with chiral NMR solvating agents that rely on weak binding forces. The broad solvent compatibility is another noteworthy and important characteristic of this assay. It addresses frequently encountered problems with insufficient solubility of polar analytes, for example pharmaceuticals, in standard mobile phase mixtures required for chiral HPLC analysis. We anticipate that the broad application spectrum, ruggedness and practicality of organocatalytic chiroptical sensing with aryliso(thio)cyanate probes together with the availability of automated CD multi-well plate readers carry exceptional promise to accelerate chiral compound development projects at reduced cost and with less waste production.

Organocatalysis with a simple arylisocyanate probe enables accelerated optical concentration and enantiomeric ratio determination of a large variety of chiral compounds based on straightforward UV/CD analysis.

A chiral spirobifluorene-based bis(salen) zinc(ii) receptor towards highly enantioselective binding of chiral carboxylates

We have designed a new chiral receptor based on two salen zinc(ii) complex units connected with a spirobifluorene framework. The chiral receptor is proven to enantioselectively bind chiral carboxylate guests and the differences between the binding constants of enantiomeric guests were up to more than one order of magnitude.

Supramolecular Fluorescent Sensors: An Historical Overview and Update

Since as early as 1867, molecular sensors have been recognized as being intelligent "devices" capable of addressing a variety of issues related to our environment and health (e.g., the detection of toxic pollutants or disease-related biomarkers). In this review, we focus on fluorescence-based sensors that incorporate supramolecular chemistry to achieve a desired sensing outcome. The goal is to provide an illustrative overview, rather than a comprehensive listing of all that has been done in the field. We will thus summarize early work devoted to the development of supramolecular fluorescent sensors and provide an update on recent advances in the area (mostly from 2018 onward). A particular emphasis will be placed on design strategies that may be exploited for analyte sensing and corresponding molecular platforms. Supramolecular approaches considered include, inter alia, binding-based sensing (BBS) and indicator displacement assays (IDAs). Because it has traditionally received less treatment, many of the illustrative examples chosen will involve anion sensing. Finally, this review will also include our perspectives on the future directions of the field.

Indicator displacement assays (IDAs): the past, present and future

Indicator displacement assays (IDAs) offer a unique and innovative approach to molecular sensing. This Tutorial review discusses the basic concepts of each IDA strategy and illustrates their use in sensing applications.

96-Well Microtiter Plate Made of Paper: A Printed Chemosensor Array for Quantitative Detection of Saccharides

Simple, rapid, and accurate detection methods for saccharides are potentially applicable to various fields such as clinical and food chemistry. However, the practical applications of on-site analytical methods are still limited. To this end, herein, we propose a 96-well microtiter plate made of paper as a paper-based chemosensor array device (PCSAD) for the simultaneous classification of 12 saccharides and the quantification of fructose and glucose among 12 saccharides. The mechanism of the saccharide detection relied on an indicator displacement assay (IDA) on the PCSAD using four types of catechol dyes, 3-nitrophenylboronic acid, and the saccharides. The design of the PCSAD and the experimental conditions for the IDA were optimized using a central composite design. The chemosensors exhibited clear color changes upon the addition of saccharides on the paper because of the competitive boronate esterification. The color changes were employed for the subsequent qualitative, semiquantitative, and quantitative analyses using an automated algorithm combined with pattern recognition for digital images. A qualitative linear discrimination analysis offered discrimination of 12 saccharides with a 100% classification rate. The semiquantitative analysis of fructose in the presence of glucose was carried out from the viewpoint of food analysis utilizing a support vector machine, resulting in clear discrimination of the various concentrations of fructose. Most importantly, the quantitative detection of fructose in two types of commercial soft drinks was also successfully carried out without sample pretreatments. Thus, the proposed PCSAD can be a powerful method for on-site food analyses that can meet the increasing demand from consumers for sensors of saccharides.

Selective Detection of Methomyl Pesticide by a Catalytic Chemosensing Assay

The catalytic chemosensing assay (CCA), a new indicator displacement assay, was developed for selective detection of methomyl, a highly toxic pesticide. Trimetallic complex {[Fe^II (dmbpy)(CN)₄ ]-[Pt^II (DMSO)Cl]₂ -[Ru^II (bpy)₂ (CN)₂ ]} (1; dmbpy=4,4'-dimethyl-2,2'-bipyridine, bpy=2,2'-bipyridine) was synthesized as a task-specific catalyst to initially reduce and degrade methomyl to CH₃ SH/CH₃ NH₂ /CH₃ CN/CO₂ . The thus-produced CH₃ SH interacts with the trimetallic complex to displace the cis-[Ru^II (bpy)₂ (CN)₂ ] luminophore for monitoring. Other pesticides, including organophosphates and similar carbamate pesticides, remained intact under the same catalytic conditions; a selective sensing signal is only activated when 1 recognizes methomyl. Furthermore, 1 can be applied to detect methomyl in real water samples. In the luminescent mode of the assay, the method detection limit (MDL) of 1 for methomyl (LD₅₀ =17 mg kg^-1 ) was 1.12 mg L^-1 .

Functionalized Chiral Bambusurils: Synthesis and Host-Guest Interactions with Chiral Carboxylates

Bambusurils are a class of macrocyclic anion receptors that exhibit notable anion recognition properties, able to bind various inorganic anions as well the carboxylates or sulfonates. Recently, we reported enantioselective recognition of chiral carboxylates using non-functionalized chiral bambusuril derivatives. Herein, we report the synthesis and host-guest properties of two new representatives of chiral bambusuril macrocycles bearing ester functional groups, differing by the substituents attached to their portals. Their supramolecular properties in terms of carboxylate binding were studied by means of NMR in DMSO-d₆ . The reported bambusurils bind selected chiral carboxylates with enantioselectivity factors up to 3.1. The results indicated that the selectivity towards different carboxylates is governed by the steric constraint of the substituents surrounding bambusuril portals. No clear trend in the binding affinities and their enantioselectivities was found.

Exploiting fluorescent zinc(ii) and copper(ii) complexes for enantiomeric excess determination of hydroxycarboxylates

Fluorescent Zn(ii) complexes with quinolino-1,2-diaminocylohexane ligands recognize enantiomeric excess in scalemic mixtures of α-hydroxycarboxylates.