A zirconium-based metal-organic framework sensitized by thioflavin-T for sensitive photoelectrochemical detection of C-reactive protein

Functional nucleic acid biosensors utilizing rolling circle amplification

Functional nucleic acids regulate rolling circle amplification to produce multiple detection outputs suitable for the development of point-of-care diagnostic devices.

Flexible photoelectrochemical biosensor for ultrasensitive microRNA detection based on concatenated multiplex signal amplification

Precise microRNA (miRNA) analysis is significant importance for early disease diagnosis. Herein, a novel flexible photoelectrochemical (PEC) biosensor for miRNA determination was developed by employing CdS NPs-modified carbon cloth (CC) on polyimide (PI) film as photoelectric material to provide the PEC responses and an efficient four-stage reaction system as the target recognition and signal amplification unit to improve the analytical performance. In this PEC biosensor, the presence of target miR-21 would trigger the catalytic hairpin assembly (CHA) and the following hybridization chain reaction (HCR) to produce a long dsDNA labeled with numerous biotins, which would further capture a large amount of alkaline phosphatase (ALP) for catalyzing the generation of ascorbic acid (AA). As an efficient electron donor, AA could be oxidized by the photoelectrode, which would initiate a redox cycling amplification process to regenerate AA, resulting in the enhancement of the photocurrent response. Benefitting from the synergistic nucleic acid-based, enzyme catalytic, and chemical signal amplification strategies, the proposed biosensing strategy enabled ultrasensitive miRNA determination. As expected, the PEC biosensor performed satisfactory analytical performances with a linear range of 1 fM to 1 nM and the detection limit down to 0.41 fM. Furthermore, the PEC biosensing strategy exhibited recommendable selectivity, stability, flexibility, and practical applicability. Therefore, this sensing platform provides promising potential for application in bioassay and early diagnosis of disease.

Advances in aptamer-based sensing assays for C-reactive protein

C-reactive protein (CRP), a non-specific acute-phase indicator of inflammation, has been widely recognized for its value in clinical diagnostic applications. With the advancement of testing technologies, there have been many reports on fast, simple, and reliable methods for CRP testing. Among these, the aptamer-based biosensors are the focus and hotspot of research for achieving high-sensitivity analysis of CRP. This review summarizes the progress of in vitro aptamer screening for CRP and the recent advances in aptamer-based CRP sensor applications, thus developing insight for the new CRP aptasensor design strategy.

Synergy between Clinical Microenvironment Targeted Nanoplatform and Near-Infrared Light Irradiation for Managing Pseudomonas aeruginosa Infections

Chronic infections caused by Pseudomonas aeruginosa pose severe threats to human health. Traditional antibiotic therapy has lost its total supremacy in this battle. Here, nanoplatforms activated by the clinical microenvironment are developed to treat P. aeruginosa infection on the basis of dynamic borate ester bonds. In this design, the nanoplatforms expose targeted groups for bacterial capture after activation by an acidic infection microenvironment, resulting in directional transport delivery of the payload to bacteria. Subsequently, the production of hyperpyrexia and reactive oxygen species enhances antibacterial efficacy without systemic toxicity. Such a formulation with a diameter less than 200 nm can eliminate biofilm up to 75%, downregulate the level of cytokines, and finally promote lung repair. Collectively, the biomimetic design with phototherapy killing capability has the potential to be an alternative strategy against chronic infections caused by P. aeruginosa.

Ultrasensitive photoelectrochemical immunoassay for prostate-specific antigen based on silver nanoparticle-triggered ion-exchange reaction with ZnO/CdS nanorods

Prostate-specific antigen (PSA), a glycoprotein that is most likely to cause prostate cancer, has attracted widespread attention in recent years due to its increasing threat to people's lives and health. Herein, we developed a new signal-amplified photoelectrochemical (PEC) immunosensing method for quantitative monitoring of the target PSA based on the ion-exchange reaction for the in situ formation of ZnO/CdS/Ag₂S nanohybrids triggered by the as-released silver ions (Ag⁺) from silver nanolabels. Initially, the introduction of a target PSA caused the formation of a sandwich immunocomplex in an anti-PSA capture antibody (cAb)-coated microplate with the help of a silver nanoparticle-labeled detection antibody (AgNPs-dAb). Thereafter, the introduced AgNPs were dissolved with acid to release numerous silver ions. In this regard, an ion-exchange reaction occurred between the silver ions and ZnO/CdS nanorods on the photosensitive electrode, thus producing ZnO/CdS/Ag₂S nanohybrids to generate a relatively strong photocurrent. Under optimal conditions, the ion-exchange reaction-based PEC immunoassay exhibited a good linear range of 0.05-50 ng mL^-1 and allowed the detection of the target PSA at a concentration as low as 0.018 ng mL^-1. In addition, the PEC immunoassay displayed satisfactory repeatability, high specificity, and acceptable method accuracy. Importantly, the ion-exchange reaction-based PEC immunoassay provides a new perspective for the detection of other disease-related biomarkers by controlling the corresponding antibodies.

Electrochemical sensing of blood proteins for mild traumatic brain injury (mTBI) diagnostics and prognostics: towards a point-of-care application

Traumatic Brain Injury (TBI) being one of the principal causes of death and acquired disability in the world imposes a large burden on the global economy. Mild TBI (mTBI) is particularly challenging to assess due to the frequent lack of well-pronounced post-injury symptoms. However, if left untreated mTBI (especially when repetitive) can lead to serious long-term implications such as cognitive and neuropathological disorders. Computer tomography and magnetic resonance imaging commonly used for TBI diagnostics require well-trained personnel, are costly, difficult to adapt for on-site measurements and are not always reliable in identifying small brain lesions. Thus, there is an increasing demand for sensitive point-of-care (POC) testing tools in order to aid mTBI diagnostics and prediction of long-term effects. Biomarker quantification in body fluids is a promising basis for POC measurements, even though establishing a clinically relevant mTBI biomarker panel remains a challenge. Actually, a minimally invasive, rapid and reliable multianalyte detection device would allow the efficient determination of injury biomarker release kinetics and thus support the preclinical evaluation and clinical validation of a proposed biomarker panel for future decentralized in vitro diagnostics. In this respect electrochemical biosensors have recently attracted great attention and the present article provides a critical study on the electrochemical protocols suggested in the literature for detection of mTBI-relevant protein biomarkers. The authors give an overview of the analytical approaches for transduction element functionalization, review recent technological advances and highlight the key challenges remaining in view of an eventual integration of the proposed concepts into POC diagnostic solutions.

Metal-Organic Frameworks for Liquid Phase Applications

In the last two decades, metal-organic frameworks (MOFs) have attracted overwhelming attention. With readily tunable structures and functionalities, MOFs offer an unprecedentedly vast degree of design flexibility from enormous number of inorganic and organic building blocks or via postsynthetic modification to produce functional nanoporous materials. A large extent of experimental and computational studies of MOFs have been focused on gas phase applications, particularly the storage of low-carbon footprint energy carriers and the separation of CO2-containing gas mixtures. With progressive success in the synthesis of water- and solvent-resistant MOFs over the past several years, the increasingly active exploration of MOFs has been witnessed for widespread liquid phase applications such as liquid fuel purification, aromatics separation, water treatment, solvent recovery, chemical sensing, chiral separation, drug delivery, biomolecule encapsulation and separation. At this juncture, the recent experimental and computational studies are summarized herein for these multifaceted liquid phase applications to demonstrate the rapid advance in this burgeoning field. The challenges and opportunities moving from laboratory scale towards practical applications are discussed.

Liposome encapsulated electron donor strategy for signal-on CYFRA 21-1 photoelectrochemical analysis

A novel electron donor controlled-release system is proposed based on liposome encapsulated L-cysteine for the sensitive determination of cytokeratin 19 fragment 21-1 (CYFRA 21-1). On the one hand, a defective TiO₂ modified with methylene blue was employed as a photoactive platform which exhibited a high photoelectrochemical (PEC) response owing to the introduction of oxygen vacancies and the high  photosensitivity of the dye. On the other hand, L-cysteine as the sacrificial electron donor was encapsulated in the vesicles of liposomes, and this composite was used as the signal amplification factor, which is labeled on the secondary antibody of CYFRA 21-1 to further improve the photocurrent sensitivity. The excellent electron transfer path in photoactive materials coupled with the skilful electron donor controlled-release system, contributed to the sensitive  PEC analysis of CYFRA 21-1 underoptimum conditions. The PEC immunoassay showed a linear current response in the range 0.0001-100 ng/mL with a detection limitof 37 fg/mL. Enhanced stability and satisfactory reproducibility were also achieved. The proposed concept  provides a novel signal-on strategy for the sensitive detection of other cancer markers in the electrochemical sensing field.

Nanoscale metal-organic frameworks in detecting cancer biomarkers

Following the efficient performance of metal-organic frameworks (MOFs) as recognition elements in gas sensors, biosensors based on MOFs are now being investigated to capture and quantify potential cancer biomarkers, such as circulating tumor cells (CTCs), nucleic acids and proteins. The current status of MOF-based biosensors in the detection of early stages of cancer is in its infancy, although it has significantly emerged since the beginning of this decade. That said, salient research has been conducted in the past five years to utilize the distinctive porous crystalline structure of MOFs for highly sensitive and selective detection of cancer biomarkers. In this pursual, MOFs designed with bimetallic assembly, doped with magnetic nanoparticles, coated with polymers, and even conjugated with peptides or oligonucleotides have shown promising outcomes in detecting CTCs, nucleic acids and proteins. In particular, aptamer-conjugated MOFs are able to perform at a lower limit of detection down to the femtomolar, implying their efficacy for the point of care testing in clinical trials. In this way, aptasensors based on aptamer-conjugated MOFs present a newer sub-branch, to be coined as a MOFTA sensor in the current review. Considering the emerging progress and promising outcomes of MOFTA sensors as well as a variety of MOF-based techniques of detecting cancer biomarkers, this review will highlight their significant advances and related aspects in the recent five years on the context of detecting CTCs, nucleic acids and proteins for the early-stage detection of cancer.