Preparation of diblock copolymer nano-assemblies by ultrasonics assisted ethanol-phase polymerization-induced self-assembly

Assemblies are widely used in biomedicine, batteries, functional coatings, Pickering emulsifiers, hydrogels, and luminescent materials. Polymerization-induced self-assembly (PISA) is a method for efficiently preparing particles, mainly initiated thermally. However, thermally initiated PISA usually requires a significant amount of time and energy. Here, we demonstrate the preparation of nano-assemblies with controllable morphologies and size using ultrasound (20 kHz) assisted ethanol-phase RAFT-PISA in three hours. Using poly (N, N-dimethylaminoethyl methacrylate) as the macromolecular reversible addition-fragmentation chain transfer agent (PDMA-CTA) to control the nucleating monomer benzyl methacrylate (BzMA), we obtained nano-assemblies with different morphologies. With the length of hydrophobic PBzMA block growth, the morphologies of the assemblies at 15 wt% solid content changed from spheres to vesicles, and finally to lamellae; the morphologies of the assemblies at 30 wt% changed from spheres micelles to short worms, then vesicles, and finally to large compound vesicles. With the same targeted degree of polymerization, nano-assemblies having a 30 wt% solid content display a more evolved morphology. The input of ultrasonic energy makes the system have higher surface free energy, results the mass fraction interval of solventphilic blocks (fhydrophilic) corresponding to the formation of spherical micelles is expanded from fhydrophilic > 45 % to fhydrophilic > 31 % under ultrasound and the fhydrophilic required to form worms, vesicles, and large composite vesicles decreases in turn. It is worth noting that the fhydrophilic interval of worms prepared by ultrasonics assisted PISA gets larger. Overall, the highly green, externally-regulatable and fast method of ultrasonics assisted PISA can be extended to vastly different diblock copolymers, for a wide range of applications.

Enzymatic Dimerization-Induced Self-Assembly of Alanine-Tyramine Conjugates into Versatile, Uniform, Enzyme-Loaded Organic Nanoparticles

Herein, we report a novel enzymatic dimerization-induced self-assembly (e-DISA) procedure that converts alanine-tyramine conjugates into highly uniform enzyme-loaded nanoparticles (NPs) or nanocontainers by the action of horseradish peroxidase (HRP) in an aqueous medium under ambient conditions. The NP formation was possible with both enantiomers of alanine, and the average diameter could be varied from 150 nm to 250 nm (with a 5-12 % standard deviation of as-prepared samples) depending on the precursor concentration. About 60 % of the added HRP enzyme was entrapped within the NPs and was subsequently utilized for post-synthetic modification of the NPs with phenolic compounds such as tyramine or tannic acid. One-pot multi-enzyme entrapment of glucose oxidase (GOx) and peroxidase (HRP) within the NPs was also achieved. These GOx-HRP loaded NPs allowed multimodal detection of glucose, including that present in human saliva, with a limit of detection (LoD) of 740 nM through fluorimetry. The NPs exhibited good cytocompatibility and were stable to changes in pH (acidic to basic), temperature, ultrasonication, and even the presence of organic solvent (EtOH) to a certain extent, since they are stabilized by intermolecular hydrogen bonding, π-π, and CH-π interactions. The proposed e-DISA procedure can be widely expanded through the design of diverse enzyme-responsive precursors.

Hybrid Polymer Vesicles: Controllable Preparation and Potential Applications

Hybrid polymer vesicles contain functional nanoparticles (NPs) in their walls, interfaces, coronae, or cavities. NPs render the hybrid vesicles with specific physical properties, while polymers endow them with structural stability and may significantly reduce the high toxicity of NPs. Therefore, hybrid vesicles integrate fascinating multifunctions from both NPs and polymeric vesicles, which have gained tremendous attention because of their diverse promising applications. Various types of delicate hybrid polymeric vesicles with size control and tunable localization of NPs in different parts of vesicles have been constructed via in situ and ex situ strategies, respectively. Their potential applications have been widely explored, as well. This review presents the progress of block copolymer (BCP) vesicle systems containing different types of NPs including metal NPs, magnetic NPs, and semiconducting quantum dots (QDs), etc. The strategies for controlling the location of NPs within hybrid vesicles are discussed. Typical potential applications of the elegant hybrid vesicles are also highlighted.

Polymerization-Induced Self-Assembly for Efficient Fabrication of Biomedical Nanoplatforms

Amphiphilic copolymers can self-assemble into nano-objects in aqueous solution. However, the self-assembly process is usually performed in a diluted solution (<1 wt%), which greatly limits scale-up production and further biomedical applications. With recent development of controlled polymerization techniques, polymerization-induced self-assembly (PISA) has emerged as an efficient approach for facile fabrication of nano-sized structures with a high concentration as high as 50 wt%. In this review, after the introduction, various polymerization method-mediated PISAs that include nitroxide-mediated polymerization-mediated PISA (NMP-PISA), reversible addition-fragmentation chain transfer polymerization-mediated PISA (RAFT-PISA), atom transfer radical polymerization-mediated PISA (ATRP-PISA), and ring-opening polymerization-mediated PISA (ROP-PISA) are discussed carefully. Afterward, recent biomedical applications of PISA are illustrated from the following aspects, i.e., bioimaging, disease treatment, biocatalysis, and antimicrobial. In the end, current achievements and future perspectives of PISA are given. It is envisioned that PISA strategy can bring great chance for future design and construction of functional nano-vehicles.

RAFT-mediated polymerization-induced self-assembly (RAFT-PISA): current status and future directions

Polymerization-induced self-assembly (PISA) combines polymerization and self-assembly in a single step with distinct efficiency that has set it apart from the conventional solution self-assembly processes. PISA holds great promise for large-scale production, not only because of its efficient process for producing nano/micro-particles with high solid content, but also thanks to the facile control over the particle size and morphology. Since its invention, many research groups around the world have developed new and creative approaches to broaden the scope of PISA initiations, morphologies and applications, etc. The growing interest in PISA is certainly reflected in the increasing number of publications over the past few years, and in this review, we aim to summarize these recent advances in the emerging aspects of RAFT-mediated PISA. These include (1) non-thermal initiation processes, such as photo-, enzyme-, redox- and ultrasound-initiation; the achievements of (2) high-order structures, (3) hybrid materials and (4) stimuli-responsive nano-objects by design and adopting new monomers and new processes; (5) the efforts in the realization of upscale production by utilization of high throughput technologies, and finally the (6) applications of current PISA nano-objects in different fields and (7) its future directions.

Polymers with multiple functions: α,ω-macromolecular photoinitiators/chain transfer agents used in aqueous photoinitiated polymerization-induced self-assembly

A series of α,ω-functionalized polymers with a photoinitiator end group and a RAFT end group were synthesized and employed as macromolecular photoinitiators/chain transfer agents in aqueous photoinitiated polymerization-induced self-assembly.

Stimuli-responsive and core cross-linked micelles developed by NiCCo-PISA of helical poly(aryl isocyanide)s

We report the synthesis of redox- and pH-sensitive block copolymer micelles that contain chiral cores composed of helical poly(aryl isocyanide)s. Pentafluorophenyl (PFP) ester-containing micelles synthesised via nickel-catalysed coordination polymerisation-induced self-assembly (NiCCo-PISA) of helical poly(aryl isocyanide) amphiphilic diblock copolymers are modified post-polymerisation with various diamines to introduce cross-links and/or achieve stimulus-sensitive nanostructures. The successful introduction of the diamines is confirmed by Fourier-transform infrared spectroscopy (FT-IR), while the stabilisation effect of the cross-linking is explored by dynamic light scattering (DLS). The retention of the helicity of the core-forming polymer block is verified by circular dichroism (CD) spectroscopy and the stimuli-responsiveness of the nanoparticles towards a reducing agent (l-glutathione, GSH) and pH is evaluated by following the change in the size of the nanoparticles by DLS. These stimuli-responsive nanoparticles could find use in applications such as drug delivery, nanosensors or biological imaging.

Spherical micelles with a helical core synthesised by NiCCo-PISA are functionalised with different cross-linkers to make stimulus-sensitive nanostructures.

Organic–inorganic hybrid nanomaterials prepared via polymerization-induced self-assembly: recent developments and future opportunities

This review highlights recent developments in the preparation of organic–inorganic hybrid nanomaterials via polymerization-induced self-assembly.

Host-guest complexation modulated aqueous polymerization-induced self-assembly for monodisperse hierarchical nanoflowers

This work presents a one-step synthesis of monodisperse nanoflowers by aqueous polymerization-induced self-assembly (PISA), modulated by host-guest interactions. Owing to the low monomer swelling of nanoparticles restricted by host-guest complexation, hierarchical surficial micellar structures were generated at the outer surface of the vesicles, forming fractal nanoflowers with a diameter polydispersity as low as 1.01. Our method allows the straightforward synthesis of monodisperse hierarchical nanoparticles for a wide range of applications.

Dynamically Cross-Linked Hydrogel Electrolyte with Remarkable Stretchability and Self-Healing Capability for Flexible Electrochromic Devices

It is desired to develop self-healing gel electrolytes for flexible electrochromic devices (ECDs) due to the demand of healing damages caused during operations. We here report a hydrogel electrolyte with remarkable self-healing capability, excellent stretchability, and ionic conductivity. The hydrogel electrolyte was synthesized via one-step copolymerization of glycerol monomethacrylate (GMA) and acrylamide (AAm) in the presence of borate. Within the hydrogel electrolyte, dynamic cross-linking is expected to be formed due to the borate-didiol complexation and hydrogen-bonding interactions. As a result, the hydrogel electrolyte demonstrates an excellent self-healing efficiency of up to 97%, a fracture strain of 1155%, a fracture toughness of 136.6 kJ m^-3, and a fracture stress of 13.0 kPa. Additionally, a flexible ECD based on the hydrogel electrolyte and an electrochromic layer of poly(3,4-(2,2-dimethyl-propylenedioxy)thiophene) (PProDOT-Me₂) was assembled and evaluated. The device is found to be stable in both mechanical and optical properties over 1000 operation cycles. This study may provide a promising way for self-healing electrolyte gels to be utilized in a variety of flexible electrochemical devices, including ECDs, supercapacitors, and batteries.

Expanding the Scope of Polymerization-Induced Self-Assembly: Recent Advances and New Horizons

Over the past decade or so, polymerization-induced self-assembly (PISA) has become a versatile method for rational preparation of concentrated block copolymer nanoparticles with a diverse set of morphologies. Much of the PISA literature has focused on the preparation of well-defined linear block copolymers by using linear macromolecular chain transfer agents (macro-CTAs) with high chain transfer constants. In this review, a recent process is highlighted from an unusual angle that has expanded the scope of PISA including i) synthesis of block copolymers with nonlinear architectures (e.g., star block copolymer, branched block copolymer) by PISA, ii) in situ synthesis of blends of polymers by PISA, and iii) utilization of macro-CTAs with low chain transfer constants in PISA. By highlighting these important examples, new insights into the research of PISA and future impact these methods will have on polymer and colloid synthesis are provided.

One-Step Preparation of Thermo-Responsive Poly(N-isopropylacrylamide)-Based Block Copolymer Nanoparticles by Aqueous Photoinitiated Polymerization-Induced Self-Assembly

Poly(N-isopropylacrylamide) (PNIPAM) is an important thermo-responsive polymer that finds applications in many areas. However, the preparation of PNIPAM-based block copolymer nanoparticles with higher-order morphologies at high solids is challenging. Herein, aqueous photoinitiated polymerization-induced self-assembly (photo-PISA) of N-isopropylacrylamide (NIPAM) using an asymmetrical cross-linker is developed for one-step preparation of PNIPAM-based block copolymer nanoparticles with various morphologies (spheres, worms, and vesicles). It is demonstrated that reaction temperature has a great effect on both polymerization kinetics and morphologies of block copolymer nanoparticles. Reversible addition-fragmentation chain transfer (RAFT) reactive groups embedded inside the PNIPAM core provide a landscape for further functionalization. PNIPAM-based block copolymer nanoparticles with different surface properties are prepared by seeded photo-PISA at room temperature. Finally, these block copolymer nanoparticles are also used as additives to tune mechanical properties of hydrogels via covalent cross-linking.

Dual-responsive polymersomes as anticancer drug carriers for the co-delivery of doxorubicin and paclitaxel

Multi stimuli-responsive polymersomes are in high demand as smart drug carriers, particularly for the treatment of complex cancers. However, most polymersomes have multi-responsiveness that does not affect each other and focus on single drug loading. Here, we have designed photo-crosslinked temperature and pH dual-responsive polymersomes by the self-assembly of a triblock polymer of methoxyl poly(ethylene glycol)-b-poly(N-isopropylacrylamide)-b-poly[2-(diethylamino)ethyl methacrylate-co-2-hydroxy-4-(methacryloyloxy)benzophenone] (mPEG-b-PNIPAM-b-P(DEAEMA-co-BMA)) synthesized via reversible addition-fragmentation chain transfer polymerization (RAFT). The dual-responsive polymersomes had a layered membrane, resulting in tunable permeability. Importantly, the polymersomes were proved to have a pH-controlled temperature-responsiveness. A hydrophilic-hydrophobic drug pair (doxorubicin hydrochloride, DOX, and paclitaxel, PTX) could be co-encapsulated in the fabricated polymersomes. The membrane permeability based on its layered structure was triggered by the change in temperature and pH to permit the separate control on the release of DOX and PTX. In a simulated tumor microenvironment, DOX and PTX encapsulated in the polymersomes could take effect for a relatively longer period and could work synergistically. Thus, the photo-crosslinked and dual-responsive polymersomes can be considered as promising drug carriers in the field of tumor combination chemotherapy.

Polymerisation-induced self-assembly (PISA) as a straightforward formulation strategy for stimuli-responsive drug delivery systems and biomaterials: recent advances

Stimuli-responsive amphiphilic block copolymers have emerged as promising nanocarriers for enhancing site-specific and on-demand drug release in response to a range of stimuli such as pH, the presence of redox agents, and temperature. The formulation of amphiphilic block copolymers into polymeric drug-loaded nanoparticles is typically achieved by various methods (e.g. oil-in-water emulsion solvent evaporation, solid dispersion, microphase separation, dialysis or microfluidic separation). Despite much progress that has been made, there remain many challenges to overcome to produce reliable polymeric systems. The main drawbacks of the above methods are that they produce very low solid contents (<1 wt%) and involve multiple-step procedures, thus limiting their scope. Recently, a new self-assembly methodology, polymerisation-induced self-assembly (PISA), has shown great promise in the production of polymer-derived particles using a straightforward one-pot approach, whilst facilitating high yield, scalability, and cost-effectiveness for pharmaceutical industry protocols. We therefore focus this review primarily on the most recent studies involved in the design and preparation of PISA-generated nano-objects which are responsive to specific stimuli, thus providing insight into how PISA may become an effective formulation strategy for the preparation of precisely tailored drug delivery systems and biomaterials, while some of the current challenges and limitations are also critically discussed.

Non-thermally initiated RAFT polymerization-induced self-assembly

This review summarizes the recent non-thermal initiation methods in RAFT mediated polymerization-induced self-assembly (PISA), including photo-, redox/oscillatory reaction-, enzyme- and ultrasound wave-initiation.

Thermoresponsive Block Copolymer Vesicles by Visible Light-Initiated Seeded Polymerization-Induced Self-Assembly for Temperature-Regulated Enzymatic Nanoreactors

Block copolymer vesicles loaded with active compounds have been employed as decent candidates to mimic complex biological systems that attract considerable interest in different research communities. We herein report a visible light-initiated seeded reversible addition-fragmentation chain transfer (RAFT)-mediated polymerization-induced self-assembly (PISA) for in situ preparation of enzyme-loaded cross-linked block copolymer vesicles without compromising the bioactivity. Permeability of the vesicular membrane can be regulated through changing the solution temperature, allowing further control over the enzymatic reaction rate of enzyme-loaded vesicles. Finally, non-cross-linked thermoresponsive block copolymer vesicles that can transform into worm-like micelles at low temperature are also prepared by this method, allowing the release of bimacromolecules from the vesicles under mild conditions.

Polymerization techniques in polymerization-induced self-assembly (PISA)

The development of controlled/“living” polymerization greatly stimulated the prosperity of the fabrication and application of block copolymer nano-objects.

Photoregulated reversible addition–fragmentation chain transfer (RAFT) polymerization

Different strategies on photoregulated RAFT polymerization are developed. This minireview summarizes recent advances in photoregulated RAFT polymerization and its applications.

Polymerization-induced self-assembly for the fabrication of polymeric nano-objects with enhanced structural stability by cross-linking

This review discusses the strategies of core-cross-linking in most of the PISA literatures (including post-polymerization cross-linking, photo-cross-linking and in situ cross-linking) and the applications of the cross-linked nano-objects.

Uncontrolled polymerization that occurred during photoinitiated RAFT dispersion polymerization of acrylic monomers promotes the formation of uniform raspberry-like polymer particles

Uniform raspberry-like polymer particles are prepared by a different type of photoinitiated RAFT dispersion polymerization.

Cross-linking approaches for block copolymer nano-assemblies via RAFT-mediated polymerization-induced self-assembly

This minireview summarizes the current cross-linking approaches to stabilize block copolymer nano-assemblies obtained via RAFT-mediated PISA process.

100th Anniversary of Macromolecular Science Viewpoint: Heterogenous Reversible Deactivation Radical Polymerization at Room Temperature. Recent Advances and Future Opportunities

Heterogenous reversible deactivation radical polymerization (RDRP) has become an important method for the preparation of a diverse set of well-defined polymer materials in dispersed systems. Conducting heterogeneous RDRP at room temperature seems to be a minor adjustment in polymerization technique but this will lead to a great opportunity for functional polymer synthesis, developing of interesting heterogeneous RDRP systems, and better mechanistic insights into heterogeneous RDRP. In this Viewpoint, we highlight some recent advances of room-temperature heterogeneous RDRP that are challenging to achieve via traditional thermally initiated heterogeneous RDRP. We hope that this Viewpoint can provide some inspiration for both experts in this field and new comers, as well as nonexperts who are interested in preparing their own polymer materials by conducting room-temperature heterogeneous RDRP.