Ultrafine cobalt nitride nanoparticles supported on carbon nanotubes as efficient electrocatalyst for rechargeable zinc-air batteries

Built-in Electric Field in 1D/2D Heterostructure Boosts Zinc Air Battery Performance

The realization of a rechargeable zinc-air battery (ZAB) is hindered by the low intrinsic oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) activities. In this work, an abundant built-in electric field is noticed in a 1D/2D CoO/CoS2 heterostructure, triggering electron transfer from CoO to CoS2 associated with a downshifted d band center of the Co atom mitigating the strong electrochemical adsorption of *OH species on active sites; thereby, boosted OER and ORR performance are achieved. Namely, the OER specific activity of CoO/CoS2 is enhanced by 3.8- and 2.2-fold compared to the counterpart of CoO and CoS2, respectively. Furthermore, the kinetic current density of CoO/CoS2, a fingerprint of intrinsic ORR activity, is promoted by 46 and 6.6 times relative to CoO and CoS2. The rechargeable ZAB performance attains 215.6 mW cm-2, 1.6-times better than Pt/C-IrO2. Moreover, the superior performance remained for 600 h. Besides, the battery performance of the all-solid-state ZAB reaches 83.8 mW cm-2, revealing its promising application in wearable device.

First-Row Transition Metals for Catalyzing Oxygen Redox

Rechargeable zinc-air batteries are widely recognized as a highly promising technology for energy conversion and storage, offering a cost-effective and viable alternative to commercial lithium-ion batteries due to their unique advantages. However, the practical application and commercialization of zinc-air batteries are hindered by the sluggish kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Recently, extensive research has focused on the potential of first-row transition metals (Mn, Fe, Co, Ni, and Cu) as promising alternatives to noble metals in bifunctional ORR/OER electrocatalysts, leveraging their high-efficiency electrocatalytic activity and excellent durability. This review provides a comprehensive summary of the recent advancements in the mechanisms of ORR/OER, the performance of bifunctional electrocatalysts, and the preparation strategies employed for electrocatalysts based on first-row transition metals in alkaline media for zinc-air batteries. The paper concludes by proposing several challenges and highlighting emerging research trends for the future development of bifunctional electrocatalysts based on first-row transition metals.

Recycling cobalt in spent lithium ion batteries to design CoN/HPCF/CoN electrocatalysts for advanced zinc-air batteries

Cobalt (Co) in spent lithium ion batteries was recycled to design a hollow and porous CoN/HPCF/CoN bifunctional electrocatalyst. It reveals superior rechargeable zinc-air battery performance (peak power density is 161.6 mW cm-2) with excellent stability.

In situ space-confined growth of Co3O4 nanoparticles inside N-doped hollow porous carbon nanospheres as bifunctional oxygen electrocatalysts for high-performance rechargeable zinc-air batteries

Developing high-performance and low-cost bifunctional oxygen electrocatalysts for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is of great significance for accelerating the commercialization of rechargeable zinc-air batteries (RZABs). Herein, in situ grown Co₃O₄ nanoparticle-embedded N-doped hollow porous carbon nanospheres (Co₃O₄@N-HPCNs) are synthesized via template-assisted pyrolysis as efficient bifunctional ORR/OER electrocatalysts. The N-HPCNs efficiently seize and confine Co₃O₄ nanoparticles to enhance electronic conductivity and structural stability, while the hollow porous architecture offers adequate mass diffusion pathways to improve the accessibility of reactants and electrolytes on active sites. Therefore, the as-obtained Co₃O₄-10%@N-HPCNs display outstanding activity and stability for the ORR and the OER, even outperforming commercial Pt/C and Ru/C catalysts. Liquid RZABs assembled with Co₃O₄-10%@N-HPCN cathodes exhibit a large specific capacity of 768.3 mA h g^-1_Zn, a high peak power density of 145.6 mW cm^-2 and a long-term cycling stability for over 1000 h, demonstrating much-enhanced battery performance in comparison with that of Pt/C + Ru/C based RZABs. Also, flexible quasi-solid-state RZABs assembled with Co₃O₄-10%@N-HPCN cathodes exhibit a considerable power density of 132.0 mW cm^-2 and a stable charge-discharge voltage for a long period even upon bending. This work provides a new approach for the development of catalysts with high activity, long-term stability and low cost.

Interstitial and substitutional light elements in transition metals for heterogeneous catalysis

The addition of foreign element dopants to monometallic nanoparticle catalysts is of great importance in industrial applications. Both substitutional and interstitial doping of pure metallic phases can give profound effects such as altering electronic and transport properties, lattice parameters, phase transitions, and consequently various physicochemical properties. For transition metal catalysts, this often leads to changes in catalytic activity and selectivity. This article provides an overview of the recent developments regarding the catalytic properties and characterisation of such systems. In particular, the structure-activity relationship for a number of important chemical reactions is summarised and the future prospects of this area are also explored.

Electronically interacted Co3O4/WS2 as superior oxygen electrode for rechargeable zinc-air batteries

The electronically interacted Co3O4/WS2 with a maximum power density of 174 mW cm-2, 2.3 fold better than Pt/C-IrO2, shows its superiority as an oxygen electrode for rechargeable zinc-air batteries.