Film-based fluorescence sensing: a "chemical nose" for nicotine

Molecular design and architectonics towards film-based fluorescent sensing

The past few decades have witnessed encouraging progress in the development of high-performance film-based fluorescent sensors (FFSs) for detecting explosives, illicit drugs, chemical warfare agents (CWAs), and hazardous volatile organic chemicals (VOCs), among others. Several FFSs have transitioned from laboratory research to real-world applications, demonstrating their practical relevance. At the heart of FFS technology lies the sensing films, which play a crucial role in determining the analytes and the resulting signals. The selection of sensing fluorophores and the fabrication strategies employed in film construction are key factors that influence the fluorescence properties, active-layer structures, and overall sensing behaviors of these films. This review examines the progress and innovations in the research field of FFSs over the past two decades, focusing on advancements in fluorophore design and active-layer structural engineering. It underscores popular sensing fluorophore scaffolds and the dynamics of excited state processes. Additionally, it delves into six distinct categories of film fabrication technologies and strategies, providing insights into their advantages and limitations. This review further addresses important considerations such as photostability and substrate effects. Concluding with an overview of the field's challenges and prospects, it sheds light on the potential for further development in this burgeoning area.

Designing and preparing supramolecular encapsulation systems based on fraxetin and cyclodextrins for highly selective detection of nicotine

Herein, a series of water-soluble supramolecular inclusion complexes (ICs) probes were prepared using cyclodextrins (CDs) and fraxetin (FRA) to detect nicotine (NT) with high selectivity in vitro and in vivo. The FRA/CD ICs prepared through the saturated solution method exhibited excellent water solubility, stability, and biocompatibility. A clear host-guest inclusion model was provided by the theoretical calculations. The investigation revealed that NT was able to enter into the cavities of FRA/β-CD IC and FRA/γ-CD IC, and further formed charge transfer complexes with FRA in the CD cavities, resulting in a rapid and highly selective fluorescence-enhanced response with the lowest detection limits of 1.9 × 10-6 M and 9.7 × 10-7 M, and the linear response ranged from 0.02 to 0.3 mM and 0.01-0.05 mM, respectively. The IC probes showed good anti-interference performance to common interferents or different pH environments, with satisfactory reproducibility and repeatability of response to NT. Furthermore, the potentiality of the probes was confirmed through fluorescence imaging experiments using human lung cancer cells and the lung tissue of mice. This study offers a fresh perspective for detecting NT in environmental and biomedical analysis.

Precise Manipulation of Excited-State Intramolecular Proton Transfer via Incorporating Charge Transfer toward High-Performance Film-Based Fluorescence Sensing

Excited-state intramolecular proton transfer (ESIPT) has been widely employed for the design of a variety of functionality-led molecular systems. However, precise manipulation of the excited-state reaction is challenging. Herein, we report a new tactic for tuning ESIPT via incorporating an excited-state intramolecular charge transfer (ESICT) process. Specifically, three o-carborane derivatives, NaCBO, PaCBO, and PyCBO, were designed, where the 2-(2'-hydroxyphenyl)-benzothiazole is a typical ESIPT unit functioning as an electron acceptor, and the electron-donating units are naphthyl-(Na), phenanthrenyl-(Pa), and pyrenyl-(Py), respectively. The architectures of the molecules are featured with a face-to-face alignment of the two units. Spectroscopy and theoretical calculation studies revealed that the electron-donating capacity of the donors and solvent polarity continuously modulate the ESIPT/ESICT energetics and dynamics, resulting in distinct emissions. Moreover, the molecules depicted not only highly porous structures but also very different fluorescent colors in the solid state, enabling highly selective film-based fluorescence sensing of mustard gas simulant, 2-chloroethyl ethyl sulfide, with a detection limit of 50 ppb and a response time of 5 s. This work thus provides a reliable strategy for the creation of high-performance sensing fluorophores via ESIPT manipulation.

Fast and Selective Detection of Trace Chemical Warfare Agents Enabled by an ESIPT-Based Fluorescent Film Sensor

Reliable detection of airborne chemical warfare agents (CWAs) at the site and in real-time remains a challenge due to the rarity of miniaturized analytical tools. Herein, an o-carborane-functionalized benzothiazole derivative (PCBO) with excited-state intramolecular proton transfer (ESIPT) and AIE characteristics was synthesized. The PCBO-based film sensor showed a highly sensitive response to representative simulants of CWAs, and detection limits were found to be 1.0 mg·m^-3 for triphosgene, 6.0 mg·m^-3 for chloroethyl ethyl sulfide, and 0.2 mg·m^-3 for diethyl chlorophosphite. Moreover, the sensor showed great reusability (>100 cycles) and unprecedented response speed (<0.5 s). The excellent sensing performance was ascribed to the microenvironmental sensitivity of the sensing fluorophore, the porous adlayer structure of the film, and the specific binding of the fluorophore to the analytes. Furthermore, discrimination and identification of the examined CWA simulants were realized via the introduction of another fluorophore (HCBO)-based film. Importantly, a portable fluorescent CWA detector was built with the sensor as the key component, and its applicability was demonstrated by the successful detection of a typical CWA sample (Sarin). The present study indicates that fluorescent film sensors could satisfy reliable onsite and real-time detection of harmful chemicals.

Highly Stable Copper Nano Cluster on Nitrogen-Doped Graphene Quantum Dots for the Simultaneous Electrochemical Sensing of Dopamine, Serotonin, and Nicotine; a Possible Addiction Scrutinizing Strategy

A highly stable copper nanocluster CuNC@N-GQD which exhibited stability for more than one year was synthesized using nitrogen doped graphene quantum dots (N-GQDs) as reducing and capping agents and smaller...

Wood-Derived Carbon Materials and Light-Emitting Materials

Wood is a sustainable and renewable material that naturally has a hierarchical structure. Cellulose, hemicellulose, and lignin are the three main components of wood. The unique physical and chemical properties of wood and its derivatives endow them with great potential as resources to fabricate advanced materials for use in bioengineering, flexible electronics, and clean energy. Nevertheless, comprehensive information on wood-derived carbon and light-emitting materials is scarce, although much excellent progress has been made in this area. Here, the unique characteristics of wood-derived carbon and light-emitting materials are summarized, with regard to the fabrication principles, properties, applications, challenges, and future prospects of wood-derived carbon and light-emitting materials, with the aim of deepening the understanding and inspiring new ideas in the area of advanced wood-based materials.

Flexible and Transparent Oligothiophene-o-Carborane-Containing Hybrid Films for Nonlinear Optical Limiting Based on Efficient Two-Photon Absorption

Structure-property relationship for fluorophores with favorable nonlinear optical (NLO) properties are promising topics in organic chemistry and material science. Herein, a series of terthiophene-o-carborane dyads and triads covalently linked with different end-capping styles were readily synthesized and comprehensively investigated. Quantitative values of the crystal and packing structures, photophysical parameters including aggregation-induced emission (AIE) and two-photon absorption (2PA) were provided. Significant impact of carborane unit for introducing the AIE characteristic has been investigated in contrast to the parent oligothiophene. All the obtained fluorophores exhibit maximum absorption around 370 nm in THF and emit bright reddish photoluminscence with absolute fluorescence quantum yields above 16% in solid states. Intramolecular charge communication between oligothiophene and carborane plays important roles in the related NLO properties. These results are supported well by the time-dependent DFT theoretical calculations. Effective 2PA cross sections (δ_2PA = 95-355 GM@650 nm) and transition dipole moments of the derivatives are variable for different end-capping styles. Their potential applications as optical limiting materials based on the 2PA mechanism in solutions and doped PDMS films were further evaluated. Taken together, this work provides an understanding of their structure-property relationship, and flexible PDMS films as outstanding candidates for practical applications in optical limiting.

In Situ Determination of Sialic Acid on Cell Surface with a pH-Regulated Polymer Enzyme Nanoreactor

Sialic acid (SA) is an important monosaccharide that is involved in incurable cancer immunotherapy. However, it is difficult to detect SA in situ using the existing strategy based on the SA-terminated glycopeptide extraction from the cell lysate. The countermeasures of the bottleneck caused by cell disruption and peptide extraction should be designed based on a "cell-surface attachment and controlled enzymolysis" protocol. Herein, a poly(styrene-co-maleic anhydride-acrylic acid-concanavalin A) (PSM-PAA-ConA) was synthesized and developed as a pH-regulated enzyme nanoreactor after being loaded with sialidase and myoglobin. The nanoreactor showed controllable biocatalysis induced by a cascade enzyme reaction and applied for the in situ detection of SA on a living cell surface. The addition of an acidic solution resulted in a decrease in the size of the nanoreactor and enhancement of its permeability, triggering an "on" state of the SA catalysis. Subsequent pH increase led to increased hydrophilicity of the nanoreactor, increasing its size and resulting in the catalytic "off" state. ConA assisted the cell-surface attachment of the enzyme reactor. Furthermore, SA on the surface of living cancer cells was successfully monitored by the pH-regulated enzyme nanoreactor, demonstrating the feasibility of high specificity in situ analysis for SA. This pH-induced catalytic efficiency control by the enzyme nanoreactor provides a potential platform for functional stimuli-responsive catalytic systems as well as a strategy for in situ analysis of biomolecules on the cell surface.

High-Performance Trichloroacetic Acid Sensor Based on the Intramolecular Hydrogen Bond Formation and Disruption of a Specially Designed Fluorescent o-Carborane Derivative in the Film State

Discriminative and sensitive detection of environmentally important and health-related trichloroacetic acid (TCA) suffers from various problems such as bulky instruments and time-consuming operation as well as complex sample processing. Herein, we present a rapid, sensitive, and specific method for the detection of gaseous TCA using a fluorescent single-molecule array. An o-carborane-based benzothiazole derivative (CB-BT-OCH₃) with specific fluorescence properties was specifically designed and utilized to fabricate a film-based single-molecule array. It was revealed that the fluorescent film is photochemically stable and extremely sensitive to TCA vapor, depicting an observable fluorescence color change from green to blue. The experimental detection limit is 0.2 ppm, which is lower than the safety limit (1 ppm) required by the threshold limit values and biological exposure indices. In addition, the film could show detectable intensity change within 0.2 s. On the basis of multiple signal responses, a conceptual two-channel-based fluorescent TCA sensor was developed. Importantly, the proposed conceptual sensor paves a new route to the development of specific fluorescent film-based sensor arrays with a single fluorophore as sensing units.

Recovering the Thermally Activated Delayed Fluorescence in Aggregation-Induced Emitters of Carborane

The aggregation-induced emission (AIE) behaviors of carborane-based hybrid emitters have been extensively reported, while their combinations with the thermally activated delayed fluorescence (TADF) are still scarce. We designed and synthesized three Janus carboranes (the chemical structures resemble the double-faced god, Janus) Cb-1/2/3 with different carbazole moieties. All of the Janus carboranes exhibited quenched emission in solution with Φ_PL (quantum efficiency of photoluminescence (PL)) lower than 0.01. The PL performance was improved by proceeding to the aggregates in THF/water (Φ_PL 0.17-0.35) and further improved in the crystals or solid with Φ_PL up to 0.99 for Cb-1, 0.85 for Cb-2, and 0.61 for Cb-3, which agreed with the AIE enhancement. Although the PL of solid Cb-1/2/3 showed non-TADF properties with lifetimes only at several nanoseconds, the crystallographic studies have shown a root cause of π···π stacking that quenched the TADF, and the theoretical calculations forecasted small singlet-triplet energy gaps (ΔE_S-T) therein. According to these findings, TADF was recovered in Cb-1/2/3 by doping into 1,3-bis(carbazol-9-yl)benzene (mCP). The 10 wt % doped films of Cb-1/2/3 have achieved a trade-off of Φ_PL (0.84 in Cb-3 and 0.83 in Cb-1) and delayed lifetime (up to 8 μs). The doped devices of organic light-emitting diodes incorporating Cb-1/2/3 achieved the highest external quantum efficiency at 10.1% and the maximized luminance of 5920 cd/m² at a driving voltage of 8 V.

High-Performance Ketone Sensing in Vapor Phase Enabled by o-Carborane-Modified Cyclometalated Alkynyl-Gold(III) Complex-Based Fluorescent Films

Development of high-performance, low-power-consumption, small-sized detectors is a key issue for fabricating specific miniaturized chromatographs (GCs). Herein, we report, for the first-time, utilization of a film-based fluorescent sensor as a GC detector. In the studies, we designed a new o-carborane derivative of a known cyclometalated alkynyl-gold(III) complex, Au-CB. Unlike the parent gold(III) complex, the newly synthesized Au-CB depicted a remarkable aggregation-induced emission (AIE) property, enabling fabrication of a fluorescent film. The film emission is highly sensitive to the presence of ketones such as acetone, 2-pentanone, 3-pentanone, cyclopentanone, etc., in the air. It was demonstrated that the sensing performance of the film could be further improved by changing the film from a planar structure to a tubular one. Via combination with an earlier reported homemade sensory device, a conceptual film-based fluorescent sensor was developed, which demonstrated instant and fully reversible response to the ketones. The experimental detection limits for cyclohexanone and acetone could be lower than 0.08 and 13.0 ppm, respectively. Moreover, the sensor is super stable, as 24 h continuous illumination resulted in less than 1.0% reduction of the fluorescence emission, 50 successive sensings showed no observable decay in the performance, and more than 1 year of storage had no effect upon the property. Further studies demonstrated that the film sensor could be used as a GC detector with performance comparable to the commercial flame ionization detector (FID), which lays the foundation for future applications in specific miniaturized GCs because of its merits in size, power consumption, carrier gas, etc.

Indicator Displacement Assay Inside Dye-Functionalized Covalent Organic Frameworks for Ultrasensitive Monitoring of Sialic Acid, an Ovarian Cancer Biomarker

Identifying biomolecules for disease diagnosis requires simple, accurate, and reliable analytical techniques. Multiple signal transduction pathways have promoted the development of various biological analysis systems. However, most systems are largely limited by a single mechanism or model analysis, which can easily lead to false-positive/negative results. Herein, we report a covalent organic framework (COF) (TpPa-1) functionalized with a dye (fluorescein sodium) and design this hybrid material (TpPa-1@Dye) to fabricate hydrogels for subsequent analysis with the indicator displacement assay (IDA) method. Selecting a suitable metal cation (Cr³⁺) for the preparation of hydrogels can reduce the background fluorescence, improve the detection sensitivity, and increase the corresponding sensing selectivity. The TpPa-1@Dye functions as an indicator in the IDA-in-COF system, and Cr³⁺ is a receptor of the analyte (sialic acid (SA), a biomarker for ovarian cancer diagnosis). Based on the above studies, the integrative logic operations (AND + IMP) are further established, it helps in elucidating the design rules of the IDA-in-COF approach. This work represents the first effort in designing IDA-in-COF luminescent sensors with an On-Off-On mechanism to determine biomarkers and provides a new approach for developing hybrid COF luminescent materials as analysis platforms for human health monitoring.

Perylene Bisimide Derivative-Based Fluorescent Film Sensors: From Sensory Materials to Device Fabrication

Film-based fluorescent sensors have become an important field of sensor research due to abundant acquirable signals, real-time monitoring, and ease of miniaturization and integration, where chemically sensitive films are the most vital component of the sensor devices. In this feature article, we introduce hardware structures of film-based fluorescent sensors following the examination/investigation of the recent progress of such sensors with perylene bisimide (PBI) derivatives as sensing fluorophores in the films. PBI derivatives were specially chosen because of their outstanding chemical, photochemical, and thermal stabilities as well as their unusual high-fluorescence quantum yields. And finally, we provide a prediction for the future developments and challenges of this emerging field.

Hyperbranching-Enhanced-Emission Effect Discovered in Hyperbranched Poly(4-(cyanomethyl)phenyl methacrylate)

To disclose the effect of architecture over fluorescence behaviors of polymers, linear and hyperbranched poly(4-(cyanomethyl)phenyl methacrylate)s (PCPMAs) were synthesized by using atom transfer radical polymerization (ATRP). Compared to linear PCPMAs with weakly AIE (AIE: aggregation-induced-emission) characteristics and small-molecule analogues of 4-(cyanomethyl)phenyl isobutyrate (CPB) with ACQ (ACQ: aggregation-caused-quenching) behaviors, hyperbranched PCPMA showed dramatically stronger fluorescence at both solution and solid states and more significant AIE characteristics, which were further enhanced by increasing the branching degree, indicating a significant hyperbranching-enhanced-emission effect (HEE). The HEE effect was attributed to the strong promotion of hyperbranched architecture over the formation of a nitrile group cluster with through-space conjugation (TSC). The HEE effect provided a promising methodology to construct efficient nontraditional fluorescent polymers without large-conjugated, rigid, and planar emitter groups.