Ti3C2/BiVO4 Schottky junction as a signal indicator for ultrasensitive photoelectrochemical detection of VEGF165

Ultrathin layer TAFC on BiVO4 with ligand-to-metal charge transfer enhances built-in electric field for boosting photoelectrochemical water oxidation

To reveal the mechanism of charge transfer between interfaces of BiVO4-based heterogeneous materials in photoelectrochemical water splitting system, the cocatalyst was grown in situ using tannic acid (TA) as a ligand and Fe and Co ions as metal centers (TAFC), and then uniformly and ultra-thinly coated on BiVO4 to form photoanodes. The results show that the BiVO4/TAFC achieves a superior photocurrent density (4.97 mA cm-2 at 1.23 VRHE). The charge separation and charge injection efficiencies were also significantly higher, 82.0 % and 78.9 %, respectively. From XPS, UPS, KPFM, and density functional theory calculations, Ligand-to-metal charge transfer (LMCT) acts as an electron transport highway in TAFC ultrathin layer to promote the concentration of electrons towards metal center, leading to an increase in the work function, which enhances the built-in electric field and further improves the charge transport. This study demonstrated that the LMCT pathway on TA-metal complexes enhances the built-in electric field in BiVO4/TAFC to promote charge transport and thus enhance water oxidation, providing a new understanding of the performance improvement mechanism for the surface-modified composite photoanodes.

HCR/DNAzyme-triggered cascaded feedback cycle amplification for self-powered dual-photoelectrode detection of femtomolar HPV16

For high-performance dual-photoelectrode assay, developing a pair of photoactive materials with well-matched band structure and the design of a powerful sensing strategy are highly desirable. Herein, the Zn-TBAPy pyrene-based MOF and BiVO4/Ti3C2 Schottky junction were employed as photocathode and photoanode to form an efficient dual-photoelectrode system. The integration of the cascaded hybridization chain reaction (HCR)/DNAzyme-assisted feedback amplification with DNA walker-mediated cycle amplification strategy realizes femtomolar HPV16 dual-photoelectrode bioassay. Through the activation of the HCR cascaded with the DNAzyme system in the presence of HPV16, plentiful HPV16 analogs are generated that leads to exponential positive feedback signal amplification. Meanwhile on the Zn-TBAPy photocathode, the NDNA hybridizes with the bipedal DNA walker followed by circular cleavage by Nb.BbvCI NEase, producing a dramatically enhanced PEC readout. The achieved ultralow detection limit of 0.57 fM and a wide linear range of 10-6 nM-103 nM showcase the excellent performance of the developed dual-photoelectrode system.

Efficient Photocatalytic Reduction of Hexavalent Chromium by BiVO4-Decorated MXene Photocatalysts and Their Charge Carrier Dynamics

The synergistically MXene (Ti3C2Tx) co-catalyst-decorated BiVO4-based heterostructured photocatalysts have been synthesized by a hydrothermal approach with varied loading concentrations of MXene (Ti3C2Tx) to drive the hexavalent chromium reduction efficiently. The formation of the heterostructured photocatalyst was confirmed by the appearance of X-ray diffraction (XRD) peaks corresponding to the monoclinic BiVO4 phase and MXene (Ti3C2Tx) and also the antisymmetric (834 cm-1) and symmetric stretching (715 cm-1) of tetrahedral VO4 and D (1330 cm-1) and G (1570 cm-1) bands corresponding to MXene (Ti3C2Tx) in the Raman spectrum. The worm-like structures of BiVO4 nanocrystals grew onto the lamellar sheets of MXene (Ti3C2Tx), as shown by field emission scanning electron microscopy (FESEM), and has an increased surface area of 15.62 m2g-1 in the case of BVO-20-TC. X-ray photoelectron spectroscopy (XPS) analysis confirms the presence of V5+ and Ti3+states, and the uniform distribution of BiVO4 nanocrystals over lamellar sheets of MXene (Ti3C2Tx) is evident from energy-dispersive X-ray (EDX) analysis. The ultraviolet-diffuse reflectance spectroscopy (UV-DRS) spectra suggest a decrease in the band gap energy of BVO-20-TC to 2.335 eV, promoting a higher degree of visible light harvesting. Upon optimization, by varying the pH, the amount of the photocatalyst, and the concentration of Cr(IV), BVO-20-TC exhibits the highest photocatalytic efficiency (96.39%) while using a Cr(VI) concentration of 10 ppm at pH 2 and 15 mg of the photocatalyst, and the photoreduction of Cr(VI) to Cr(III) follows the pseudo-first-order reaction. The decrease in the PL intensity in BVO-20-TC reveals a faster transfer of electrons from MXene (Ti3C2Tx) to BiVO4. Further, the higher degree of band bending at the BiVO4/MXene (Ti3C2Tx) heterojunction, revealed from the Mott-Schottky analysis, facilitates efficient charge transfer and eventually faster and efficient photoreduction of Cr(VI) to Cr(III). The reusability and stability test undertaken for BVO-20-TC reveals that even after five cycles, the Cr (VI) photoreduction efficacy is retained. This work provides insights into photoreduction of Cr (VI) by using such heterostructures.

Antibody-free photoelectrochemical biosensor for DNA carboxylation detection based on SnS2@Ti3C2 heterojunction

As an important epigenetic modification, 5-carboxycytosine (5caC) played an important role in gene regulation, cell differentiation and growth. 5caC existed in many cells and tissues, but it was highly similar to the structure of other cytosine derivatives and had less content in the genome. Therefore, it was urgent to develop a sensitive and highly selective trace biosensor to detect 5caC. A novel photoelectrochemical biosensor was fabricated for 5-carboxy-2'-deoxycytidine-5'-triphosphate (5cadCTP) detection, where SnS₂@Ti₃C₂ nanocomposite was employed as photoactive material, polyethyleneimine was used as 5cadCTP recognition and capture reagent, and Ru(NH₃)₆³⁺ was used as photosensitizer for signal amplification. Due the good conductivity of Ti₃C₂ MXene and the matched energy band between Ti₃C₂ MXene and SnS₂, SnS₂@Ti₃C₂ nanocomposite presented strong photoactivity, which was beneficial to the high detection sensitivity. For specific recognition of 5cadCTP, the covalent interaction of -NH₂ in 5cadCTP with -COOH on the substrate electrode was used, which was beneficial to the high detection selectivity. A broad linear relationship between photocurrent and 5cadCTP concentration was observed ranging from 1 pM to 0.2 μM. The low detection limit of 260 fM was achieved. The developed method has high detection specificity and can even distinguish 5caC with its derivatives. In addition, the applicability was evaluated by detecting the content change of 5caC in the genomic DNA of rice seedlings after cultured with environmental pollutants. This work provides a novel platform for 5cadCTP detection, and it can also be applied to detect other cytosine derivatives with suitable recognition strategies.

PEDOT/FeOOH/BiVO4 Nanohybrids with Excellent Photoelectric Performance Promoted by Photothermal Effects for the Ultrasensitive Detection of MicroRNA-375-3p

Herein, a novel photoactive poly(3,4-ethyl-enedioxythiophene) (PEDOT)/FeOOH/BiVO₄ nanohybrid with excellent photoelectrochemical (PEC) efficiency was assembled for the construction of an ultrasensitive biosensor for microRNA-375-3p (miRNA-375-3p) detection. In comparison with the traditional FeOOH/BiVO₄ photoactive composite, the PEDOT/FeOOH/BiVO₄ nanohybrids exhibited markedly enhanced photocurrent due to the promoted interfacial charge separation by PEDOT, which was used not only as an electron conductor but also as a localized photothermal heater to enhance the photogenerated carrier separation. Based on this PEDOT/FeOOH/BiVO₄ photoelectrode and an enzyme-free signal amplification strategy including a target-induced catalytic hairpin assembly (CHA) and hybridization chain reaction (HCR), a PEC sensing platform for the detection of miRNA-375-3p was established, achieving a wide linear range from 1 fM to 10 pM with a low detection limit of 0.3 fM. Moreover, this work provides a general photocurrent enhancement strategy for the development of high-performing PEC biosensors for sensitive detection of biomarkers and early disease diagnosis.

Recent Trends in Metal Nanoparticles Decorated 2D Materials for Electrochemical Biomarker Detection

Technological advancements in the healthcare sector have pushed for improved sensors and devices for disease diagnosis and treatment. Recently, with the discovery of numerous biomarkers for various specific physiological conditions, early disease screening has become a possibility. Biomarkers are the body's early warning systems, which are indicators of a biological state that provides a standardized and precise way of evaluating the progression of disease or infection. Owing to the extremely low concentrations of various biomarkers in bodily fluids, signal amplification strategies have become crucial for the detection of biomarkers. Metal nanoparticles are commonly applied on 2D platforms to anchor antibodies and enhance the signals for electrochemical biomarker detection. In this context, this review will discuss the recent trends and advances in metal nanoparticle decorated 2D materials for electrochemical biomarker detection. The prospects, advantages, and limitations of this strategy also will be discussed in the concluding section of this review.

Biomedical Applications of an Ultra-Sensitive Surface Plasmon Resonance Biosensor Based on Smart MXene Quantum Dots (SMQDs)

In today’s world, the use of biosensors occupies a special place in a variety of fields such as agriculture and industry. New biosensor technologies can identify biological compounds accurately and quickly. One of these technologies is the phenomenon of surface plasmon resonance (SPR) in the development of biosensors based on their optical properties, which allow for very sensitive and specific measurements of biomolecules without time delay. Therefore, various nanomaterials have been introduced for the development of SPR biosensors to achieve a high degree of selectivity and sensitivity. The diagnosis of deadly diseases such as cancer depends on the use of nanotechnology. Smart MXene quantum dots (SMQDs), a new class of nanomaterials that are developing at a rapid pace, are perfect for the development of SPR biosensors due to their many advantageous properties. Moreover, SMQDs are two-dimensional (2D) inorganic segments with a limited number of atomic layers that exhibit excellent properties such as high conductivity, plasmonic, and optical properties. Therefore, SMQDs, with their unique properties, are promising contenders for biomedicine, including cancer diagnosis/treatment, biological sensing/imaging, antigen detection, etc. In this review, SPR biosensors based on SMQDs applied in biomedical applications are discussed. To achieve this goal, an introduction to SPR, SPR biosensors, and SMQDs (including their structure, surface functional groups, synthesis, and properties) is given first; then, the fabrication of hybrid nanoparticles (NPs) based on SMQDs and the biomedical applications of SMQDs are discussed. In the next step, SPR biosensors based on SMQDs and advanced 2D SMQDs-based nanobiosensors as ultrasensitive detection tools are presented. This review proposes the use of SMQDs for the improvement of SPR biosensors with high selectivity and sensitivity for biomedical applications.

MWCNT modified Ni-Fe LDH/BiVO4 heterojunction: boosted visible-light-driven photoelectrochemical aptasensor for ofloxacin detection

Sensitivity and selectivity, which can be identified by the photosensitivity of materials and the identification of elements, are two important factors for a photoelectrochemical aptasensor (PEC aptasensor). Herein, a patent PEC aptasensor for specifically detecting ofloxacin (OFL) was exploited, and a visible-light-active MWCNT/LDH/BiVO4 heterostructure was introduced as a photoactive material and identification elements, respectively. The combination of LDH with BiVO4 enhanced the photocurrent response, and MWCNT provided higher electron conductivity, which are advantageous for structuring PEC sensors. Furthermore, the two-pot synthesis of MWCNT/LDH/BiVO4 has the advantage of possessing an environmentally friendly character. Under optimal conditions, the photocurrent response of MWCNT/LDH/BiVO4 presents a linear trend with OFL concentration from 0.1 to 16 000 nM, and the limit of detection (S/N = 3) is as low as 0.03 nM. This new PEC sensing device afforded an ultra-sensitive sensor which has high selectivity and stability for detecting OFL.

Integrating Ti3C2/MgIn2S4 heterojunction with a controlled release strategy for split-type photoelectrochemical sensing of miRNA-21

The harsh operating conditions and time-consuming fabrication process of the photoelectrode modification process have limited the potential applications of photoelectrochemical (PEC) sensors. To overcome these drawbacks, this study introduced a unique split-type PEC biosensor for microRNA-21 (miRNA-21) detection. Specifically, a Ti₃C₂/MgIn₂S₄ heterojunction was adopted as the photosensitive material, and a target-controlled glucose release system, comprising a multifunctional porphyrin-based metal-organic framework (PCN-224), was used for signal amplification. The Ti₃C₂/MgIn₂S₄ heterojunction effectively separated the photogenerated electrons and holes, and improved the photoelectric conversion efficiency, offering a strong initial photocurrent signal during PEC biosensing. Meanwhile, the porous PCN-224 acted as a nimble nanocontainer that encapsulated glucose using a capture probe (CP). In the presence of miRNA-21, the CP formed a CP-miRNA-21 complex and then detached from PCN-224, controllably releasing the trapped glucose. The oxidization of glucose by glucose oxidase resulted in hydrogen peroxide generation, which acted as a scavenger for the holes generated on the surface of Ti₃C₂/MgIn₂S₄, and significantly enhanced the photocurrent response under visible light irradiation. Finally, the sensor exhibited good performance for miRNA-21 detection with a low detection limit (0.17 fM) and wide linearity range (0.5 fM-1.0 nM). Thus, the proposed Ti₃C₂/MgIn₂S₄-based split-type PEC sensor is a promising tool for sensitive and accurate detection of miRNA-21 and provides an innovative basis for the preparation of other high-performance sensors.

Advances of MXenes; Perspectives on Biomedical Research

The last decade witnessed the emergence of a new family of 2D transition metal carbides and nitrides named MXenes, which quickly gained momentum due to their exceptional electrical, mechanical, optical, and tunable functionalities. These outstanding properties also rendered them attractive materials for biomedical and biosensing applications, including drug delivery systems, antimicrobial applications, tissue engineering, sensor probes, auxiliary agents for photothermal therapy and hyperthermia applications, etc. The hydrophilic nature of MXenes with rich surface functional groups is advantageous for biomedical applications over hydrophobic nanoparticles that may require complicated surface modifications. As an emerging 2D material with numerous phases and endless possible combinations with other 2D materials, 1D materials, nanoparticles, macromolecules, polymers, etc., MXenes opened a vast terra incognita for diverse biomedical applications. Recently, MXene research picked up the pace and resulted in a flood of literature reports with significant advancements in the biomedical field. In this context, this review will discuss the recent advancements, design principles, and working mechanisms of some interesting MXene-based biomedical applications. It also includes major progress, as well as key challenges of various types of MXenes and functional MXenes in conjugation with drug molecules, metallic nanoparticles, polymeric substrates, and other macromolecules. Finally, the future possibilities and challenges of this magnificent material are discussed in detail.

Sensitive photoelectrochemical determination of T4 polynucleotide kinase using AuNPs/SnS2/ZnIn2S4 photoactive material and enzymatic reaction-induced DNA structure switch strategy

We report here Au nanoparticles (AuNPs)/SnS₂/ZnIn₂S₄ as a high-performance active material for sensitive photoelectrochemical (PEC) determination of T4 polynucleotide kinase (T4 PNK) using an enzymatic reaction-induced DNA structure switch strategy. To construct the PEC biosensor, a double-stranded DNA probe consisting of a CdS quantum dots (QDs)-labeled single-stranded DNA (sDNA) and its complementary DNA (cDNA) is immobilized on the AuNPs/SnS₂/ZnIn₂S₄ photoactive material. T4 PNK can catalyze the phosphorylation of 5'-OH-terminated sDNA in the double-stranded DNA probe when ATP is present, and λ-exonuclease can catalyze the degradation of the phosphorylated sDNA into small fragments. Then the cDNA forms a hairpin structure so that CdS QDs and AuNPs are in close contact, which can induce exciton-plasma interactions between CdS QDs and AuNPs. The exciton-plasma interactions significantly boost the photocurrent, enabling the "signal on" PEC determination of T4 PNK in the range of 10^-4 - 1 U mL^-1 with a detection limit of 6 × 10^-5 U mL^-1. The PEC biosensor can also be used to screen enzyme inhibitors.

Degradation of tetracycline by FeNi-LDH/Ti3C2 photo-Fenton system in water: From performance to mechanism

Recently, photo-Fenton technology has been widely used to degrade tetracycline (TC) because of its great efficiency and wide application range. Herein, Fe-Ni layered double hydroxides (FeNi-LDH)/Ti₃C₂ photo-Fenton system was constructed in this study. The results showed the introduction of Ti₃C₂ solved some problems of FeNi-LDH such as poor conductivity, easy aggregation, and high recombination rate of photoelectron. Benefiting from these advantages, FeNi-LDH/Ti₃C₂ exhibited excellent TC removal rate of 94.7% while pure FeNi-LDH was only 54%. Besides, FeNi-LDH/Ti₃C₂ possessed strong pH tolerance (2-11) and the removal efficiency was still up to 82% after the four-cycle experiment. Furthermore, the quenching experiments revealed the reaction mechanism, where ∙OH and ·O₂^- were the primary active radicals for degrading TC. Last, the results of the simulated wastewater treatment and the inorganic ion interference tests showed that FeNi-LDH/Ti₃C₂ possessed practical application potential. In brief, this study shows that FeNi-LDH/Ti₃C₂ can offer a certain theoretical basis for the actual development of hydrotalcite in heterogeneous photo-Fenton systems.

2D Materials-Based Aptamer Biosensors: Present Status and Way Forward

Current advances in constructing functional nanomaterials and elegantly designed nanostructures have opened up new possibilities for the fabrication of viable field biosensors. Two-dimensional materials (2DMs) have fascinated much attention due to their chemical, optical, physicochemical, and electronic properties. They are ultrathin nanomaterials with unique properties such as high surface-to-volume ratio, surface charge, shape, high anisotropy, and adjustable chemical functionality. 2DMs such as graphene-based 2D materials, Silicate clays, layered double hydroxides (LDHs), MXenes, transition metal dichalcogenides (TMDs), and transition metal oxides (TMOs) offer intensified physicochemical and biological functionality and have proven to be very promising candidates for biological applications and technologies. 2DMs have a multivalent structure that can easily bind to single-stranded DNA/RNA (aptamers) through covalent, non-covalent, hydrogen bond, and π-stacking interactions, whereas aptamers have a small size, excellent chemical stability, and low immunogenicity with high affinity and specificity. This review discussed the potential of various 2D material-based aptasensor for diagnostic applications, e.g., protein detection, environmental monitoring, pathogens detection, etc.

Two-dimensional Ti3C2 MXene-based nanostructures for emerging optoelectronic applications

Since the first discovery of Ti₃C₂ in 2011, two-dimensional (2D) transition-metal carbides, carbonitrides and nitrides, known as MXenes, have attracted significant attention. Due to their outstanding electronic, optical, mechanical, and thermal properties, versatile structures and surface chemistries, Ti₃C₂ MXenes have emerged as new candidates with great potential for applications in optoelectronic devices, such as photovoltaics, photodetectors and photoelectrochemical devices. The excellent metallic conductivity, high anisotropic carrier mobility, good structural and chemical stabilities, high optical transmittance, excellent mechanical strength, tunable work functions, and wide range of optical absorption properties of Ti₃C₂ MXene nanostructures are the key to their success in a number of electronic and photonic device applications. Herein, we summarize the fundamental properties and preparation of pure Ti₃C₂ MXenes, functionalized Ti₃C₂ MXenes and their hybrid nanocomposites, as well as their optoelectronic applications. In the end, the perspective and current challenges of Ti₃C₂ MXenes toward the development of advanced MXene-based nanostructures are briefly discussed for future optoelectronic applications.

Bi/BiVO4/NiFe-LDH heterostructures with enhanced photoelectrochemical performance for streptomycin detection

Streptomycin (STR) plays an essential role in bacterial infection treatments. Selectivity and sensitivity of photoelectrochemical (PEC) sensors are the two most important parameters, which can be measured using the photosensitivity of its active material. We prepared a novel PEC sensor to detect STR using Bi/BiVO₄/LDH (layered double hydroxides) heterostructures as an active material, which is photoactive in the visible light wavelength range. The simultaneous presence of LDH and Bi/BiVO₄ enhanced the material photocurrent response, which was linear to the STR concentrations in the 0.01-500 nmol/L range. The STR detection limit by this sensor was 0.0042 nmol/L. Our novel PEC-based sensing strategy includes using an ultra-sensitive and highly selective sensor for STR detection. Additionally, the two-pot synthesis of Bi/BiVO₄/LDH developed in this work is environmentally friendly.

Visible light-driven self-powered aptasensors for ultrasensitive Microcystin-LR detection based on the carrier density effect of N-doped graphene hydrogel/hematite Schottky junctions

In this work, a novel visible light-driven self-powered photoelectrochemical (PEC) platform was designed based on 3D N-doped graphene hydrogel/hematite nanocomposites (NGH/Fe₂O₃) via a facile one-pot hydrothermal route. The coupling NGH with Fe₂O₃ could generate a Schottky junction, which promoted the separation of charges. Moreover, Mott-Schottky measurements validated that the carrier concentration achieved by NGH/Fe₂O₃ was about 3.4 × 10³ times in comparison to that of pure Fe₂O₃, which was beneficial for efficient charge transfer. Owing to the carrier density effect and Schottky junction, the photocurrent of the as-fabricated NGH/Fe₂O₃ nanocomposites was 6.9-fold higher than that of pure Fe₂O₃. On the basis of such excellent Schottky junctions, an ultrasensitive visible light-induced self-powered PEC aptasensor was developed using a Microcystin-LR (MC-LR) aptamer. The as-fabricated PEC aptasensor displayed good analytical performance toward MC-LR detection in terms of wide linear range (1 pM-5 nM), low detection limit (0.23 pM, S/N = 3), excellent selectivity and high stability. This new strategy can provide a way for regulating nanostructures for more sensitive PEC sensors by increasing the carrier density.

In situ controllable heterojunction conversion strategy driven by oriented paper-based fluid transfer for human immunoglobulin G detection

Mercury ions (Hg²⁺) mediating in situ heterojunction formation strategy based on spatially separated dual working areas was developed to achieve sensitive detection of human immunoglobulin G. To be specific, the complex of antibody, the silicon dioxide, and thymine-rich hairpin DNA were immobilized onto the antigen and antibody-modified electrodes, forming a special sandwich type where T-Hg²⁺-T structure could accommodate Hg²⁺. The zinc ions from zinc sulfide (ZnS) photoelectric materials were captured by Hg²⁺ to convert ZnS to zinc sulfide-mercuric sulfide nanocomposite. Such ion exchange approach with spatially separated working electrodes endowed the sensing platform with lower background interference and high selectivity, which also avoided damage of illumination on biomolecules. In addition, by regulating the ion recognition probe, the protocol could be extended to numerous other fields like clinical diagnosis, environmental monitoring, and public safety.

Base amount-dependent fluorescence enhancement for the assay of vascular endothelial growth factor 165 in human serum using hairpin DNA-silver nanoclusters and oxidized carbon nanoparticles

A base amount-dependent fluorescence enhancement-based strategy is put forward to determine vascular endothelial growth factor 165 (VEGF₁₆₅) in human serum by the use of hairpin DNA-silver nanoclusters (hDNA-AgNCs) and oxidized carbon nanoparticles (CNPs). The hDNA-AgNCs aptasensing probe consists of AgNCs-contained hairpin loop (that generates a fluorescence signal), hairpin stem (that makes the structure stable), and the terminal aptamer 1 (that recognizes the target together with aptamer 2). It has been demonstrated that the fluorescence intensity of hDNA-AgNCs is ~ 3-fold stronger than that of single-stranded DNA-AgNCs (ssDNA-AgNCs), and hDNA-AgNCs have a strong dependence of fluorescence enhancement on the base amount in hairpin stem and loop. Upon the addition of oxidized CNPs, the terminal aptamer 1 of hDNA-AgNCs can adsorb onto the surface of oxidized CNPs via π-π stacking, and the fluorescence of hDNA-AgNCs (with excitation/emission maxima at 490/567 nm) is quenched via fluorescence resonance energy transfer (FRET). When aptamer 2 and VEGF₁₆₅ are subsequently added, aptamer 1, VEGF₁₆₅, and aptamer 2 reassemble into an intact tertiary structure, and the fluorescence is recovered because hDNA-AgNCs are far away from the surface of oxidized CNPs and the FRET efficiency decreases. Under the optimized conditions, the aptasensing probe can selectively assay VEGF₁₆₅ with a detection limit of 14 pM. The results provide a label-free and sensitive method to monitor VEGF₁₆₅ in human serum. Schematic representation of the strong dependence of fluorescence enhancement on base amount in stem and loop of hairpin DNA-silver nanoclusters. The probe can be used to assay vascular endothelial growth factor 165 (VEGF₁₆₅) and give a judgment whether human serum VEGF₁₆₅ is at a normal or abnormal level for clinical diagnosis.

Label-free and near-zero-background-noise photoelectrochemical assay of methyltransferase activity based on a Bi2S3/Ti3C2 Schottky junction

Based on Bi₂S₃/Ti₃C₂ nanosheets, a label-free photoelectrochemical sensing platform with near-zero background noise was developed for M.SssI methyltransferase activity assay.