Mechanochemistry in Block Copolymers: New Scission Site due to Dynamic Phase Separation

Mechanochemistry can lead to the degradation of the properties of covalent macromolecules. In recent years, numerous functional materials have been developed based on block copolymers (BCPs), however, like homopolymers, their chains could undergo mechanochemical damage during processing, which could have crucial impact on their performance. To investigate the mechanochemical response of BCPs, multiple polymers comprising different ratios of butyl acrylate and methyl methacrylate were prepared with similar degree of polymerization and stressed in solution via ultrasonication. Interestingly, all BCPs, regardless of the amount of the methacrylate monomer, presented a mechanochemistry rate constant similar to that of the methacrylate homopolymer, while a random copolymer reacted like the acrylate homopolymer. Size-exclusion chromatography showed that, in addition to the typical main peak shift towards higher retention times, a different daughter fragment was produced indicating a secondary selective scission site, situated around the covalent connection between the two blocks. Molecular dynamics modeling using acrylate and methacrylate oligomers were carried out and indicated that dynamic phase separation occurs even in a good solvent. Such non-random conformations can explain the faster polymer mechanochemistry. Moreover, the dynamic model for end-to-end chain overstretching supports bond scission which is not necessarily chain-centered.

Polymer Mechanochemistry in Microbubbles

Polymer mechanochemistry is a promising technology to convert mechanical energy into chemical functionality by breaking covalent and supramolecular bonds site-selectively. Yet, the mechanochemical reaction rates of covalent bonds in typically used ultrasonication setups lead to reasonable conversions only after comparably long sonication times. This can be accelerated by either increasing the reactivity of the mechanoresponsive moiety or by modifying the encompassing polymer topology. Here, a microbubble system with a tailored polymer shell consisting of an N2 gas core and a mechanoresponsive disulfide-containing polymer network is presented. It is found that the mechanochemical activation of the disulfides is greatly accelerated using these microbubbles compared to commensurate solid core particles or capsules filled with liquid. Aided by computational simulations, it is found that low shell thickness, low shell stiffness and crosslink density, and a size-dependent eigenfrequency close to the used ultrasound frequency maximize the mechanochemical yield over the course of the sonication process.

Sacrificial Mechanical Bond is as Effective as a Sacrificial Covalent Bond in Increasing Cross-Linked Polymer Toughness

Sacrificial chemical bonds have been used effectively to increase the toughness of elastomers because such bonds dissociate at forces significantly below the fracture limit of the primary load-bearing bonds, thereby dissipating local stress. This approach owes much of its success to the ability to adjust the threshold force at which the sacrificial bonds fail at the desired rate, for example, by selecting either covalent or noncovalent sacrificial bonds. Here, we report experimental and computational evidence that a mechanical bond, responsible for the structural integrity of a rotaxane or a catenane, increases the elastomer's fracture strain, stress, and energy as much as a covalent bond of comparable mechanochemical dissociation kinetics. We synthesized and studied 6 polyacrylates cross-linked by either difluorenylsuccinonitrile (DFSN), which is an established sacrificial mechanochromic moiety; a [2]rotaxane, whose stopper allows its wheel to dethread on the same subsecond time scale as DFSN dissociates when either is under tensile force of 1.5-2 nN; a structurally homologous [2]rotaxane with a much bulkier stopper that is stable at force >5.5 nN; similarly stoppered [3]rotaxanes containing DFSN in their axles; and a control polymer with aliphatic nonsacrificial cross-links. Our data suggest that mechanochemical dethreading of a rotaxane without failure of any covalent bonds may be an important, hitherto unrecognized, contributor to the toughness of some rotaxane-cross-linked polymers and that sacrificial mechanical bonds provide a mechanism to control material fracture behavior independently of the mechanochemical response of the covalent networks, due to their distinct relationships between structure and mechanochemical reactivity.

Accelerated Mechanochemistry in Helical Polymers

Polymer chains, if long enough, are known to undergo bond scission when mechanically stressed. While the mechanochemical response of random coils is well understood, biopolymers and some key synthetic chains adopt well-defined secondary structures such as helices. To understand covalent mechanochemistry in such structures, poly(γ-benzyl glutamates) are prepared while regulating the feed-monomer chirality, producing chains with similar molecular weights and backbone chemistry but different helicities. Such chains are stressed in solution and their mechanochemistry rates compared by following molecular weight change and using a rhodamine mechanochromophore. Results reveal that while helicity itself is not affected by the covalent bond scissions, chains with higher helicity undergo faster mechanochemistry. Considering that the polymers tested differ only in conformation, these results indicate that helix-induced chain rigidity improves the efficiency of mechanical energy transduction.

Mechanoresponsive diselenide-crosslinked microgels with programmed ultrasound-triggered degradation and radical scavenging ability for protein protection

In the context of controlled delivery and release, proteins constitute a delicate class of cargo requiring advanced delivery platforms and protection. We here show that mechanoresponsive diselenide-crosslinked microgels undergo controlled ultrasound-triggered degradation in aqueous solution for the release of proteins. Simultaneously, the proteins are protected from chemical and conformational damage by the microgels, which disintegrate to water-soluble polymer chains upon sonication. The degradation process is controlled by the amount of diselenide crosslinks, the temperature, and the sonication amplitude. We demonstrate that the ultrasound-mediated cleavage of diselenide bonds in these microgels facilitates the release and activates latent functionality preventing the oxidation and denaturation of the encapsulated proteins (cytochrome C and myoglobin) opening new application possibilities in the targeted delivery of biomacromolecules.

Mechanoresponsive diselenide-crosslinked microgels undergo controlled ultrasound-triggered degradation and can be used for protein delivery due to their dual protection properties acting as radical scavengers and conformation stabilizers.

Insight on the Order of Regioselective Ultrafast Formation of Disulfide Bonds in (Antimicrobial) Peptides and Miniproteins

Disulfide-rich peptides and proteins are among the most fascinating bioactive molecules. The difficulties associated with the preparation of these targets have prompted the development of various chemical strategies. Nevertheless, the production of these targets remains very challenging or elusive. Recently, we introduced a strategy for one-pot disulfide bond formation, tackling most of the previous limitations. However, the effect of the order of oxidation remained an underexplored issue. Herein we report on the complete synthetic flexibility of the approach with respect to the order of oxidation of three disulfide bonds in targets that lack the knot motif. In contrast, our study reveals an essential order of disulfide bond formation in the EETI-II knotted miniprotein. This synthetic strategy was applied for the synthesis of novel analogues of the plectasin antimicrobial peptide with enhanced activities against methicillin-resistant Staphylococcus aureus (MRSA), a notorious human pathogen.

Mechanochemical Reactivity of Bottlebrush and Dendronized Polymers: Solid vs. Solution States

We explored the mechanochemical degradation of bottlebrush and dendronized polymers in solution (with ultrasonication, US) and solid states (with ball-mill grinding, BMG). Over 50 polymers were prepared with varying backbone length and arm architecture, composition, and size. With US, we found that bottlebrush and dendronized polymers exhibited consistent backbone scission behavior, which was related to their elongated conformations in solution. Considerably different behavior was observed with BMG, as arm architecture and composition had a significant impact on backbone scission rates. Arm scission was also observed for bottlebrush polymers in both solution and solid states, but only in the solid state for dendronized polymers. Motivated by these results, multi-mechanophore polymers with bottlebrush and dendronized polymer architectures were prepared and their reactivity was compared. Although dendronized polymers showed slower arm-scission, the selectivity for mechanophore activation was much higher. Overall, these results have important implications to the development of new mechanoresponsive materials.

The influence of polymer architecture in polymer mechanochemistry

Polymer architecture is an important factor in polymer mechanochemistry. In this Feature Article, we summarize recent developments in utilizing polymer architecture to modulate mechanochemical reactions within polymers, or more specifically, the location and rates of bond scission events that lead to polymer fragmentation or mechanophore activation. Various well-defined architectures have been explored, including those of cyclic, intramolecularly cross-linked, dendritic, star, bottlebrush, and dendronized polymers. We primarily focus on describing the enhancement or suppression of mechanochemical reactivity, with respect to analogous linear polymers, as well as differences in solution- and solid-state behavior.

Folded Perylene Diimide Loops as Mechanoresponsive Motifs

A supramolecular mechanophore that can be integrated into polymers and indicates deformation by a fluorescence color change is reported. Two perylene diimides (PDIs) were connected by a short spacer and equipped with peripheral atom transfer polymerization initiators. In the idle state, the motif folds into a loop and its emission is excimer dominated. Poly(methyl acrylate) (PMA) chains were grown from the motif and the mechanophore-containing polymer was blended with unmodified PMA to afford materials that display a visually discernible fluorescence color change upon deformation, which causes the loops to unfold. The response is instant, and correlates linearly with the applied strain. Experiments with a reference polymer containing only one PDI moiety show that looped mechanophores that display intramolecular excimer formation offer considerable advantages over intermolecular dye aggregates, including a concentration-independent response, direct signaling of mechanical processes, and a more pronounced optical change.

A Polymer with Mechanochemically Active Hidden Length

Incorporating hidden length into polymer chains can improve their mechanical properties, because release of the hidden length under mechanical loads enables localized strain relief without chain fracture. To date, the design of hidden length has focused primarily on the choice of the sacrificial bonds holding the hidden length together. Here we demonstrate the advantages of adding mechanochemical reactivity to hidden length itself, using a new mechanophore that integrates (Z)-2,3-diphenylcyclobutene-1,4-dicarboxylate, with hitherto unknown mechanochemistry, into macrocyclic cinnamate dimers. Stretching a polymer of this mechanophore more than doubles the chain contour length without fracture. DFT calculations indicate that the sequential dissociation of the dimer, followed by cyclobutene isomerization at higher forces yields a chain fracture energy 11 times that of a simple polyester of the same initial contour length and preserves high energy-dissipating capacity up to ∼3 nN. In sonicated solutions cyclobutene isomerizes to two distinct products by competing reaction paths, validating the computed mechanochemical mechanism and suggesting an experimental approach to quantifying the distribution of single-chain forces under diverse loading scenarios.