Regulation Strategies for Fe-N-C and Co-N-C Catalysts for the Oxygen Reduction Reaction

Proton exchange membrane fuel cells (PEMFCs) and alkaline membrane fuel cells (AEMFCs) have received great attention as energy devices of the next generation. Accelerating oxygen reduction reaction (ORR) kinetics is the key to improve PEMFC and AEMFC performance. Platinum-based catalysts are the most widely used catalysts for the ORR, but their high price and low abundance limit the commercialization of fuel cells. Non-noble metal-nitrogen-carbon (M-N-C) is considered to be the most likely material class to replace Pt-based catalysts, among which Fe-N-C and Co-N-C have been widely studied due to their excellent intrinsic ORR performance and have made great progress in the past decades. With the improvement of synthesis technology and a deeper understanding of the ORR mechanism, some reported Fe-N-C and Co-N-C catalysts have shown excellent ORR activity close to that of commercial Pt/C catalysts. Inspired by the progress, regulation strategies for Fe-N-C and Co-N-C catalysts are summarized in this Review from 5 perspectives: (1) coordinated atoms, (2) environmental heteroatoms and defects, (3) dual-metal active sites, (4) metal-based particle promoters, and (5) curved carbon layers. We also make suggestions on some challenges facing Fe-N-C and Co-N-C research.

Spherical porous iron-nitrogen-carbon nanozymes derived from a tannin coordination framework for the preparation of L-DOPA by emulating tyrosine hydroxylase

L-3,4-Dihydroxyphenylalanine (L-DOPA) is widely used in Parkinson's disease treatment and is therefore in high demand. Development of an efficient method for the production of L-DOPA is urgently required. Nanozymes emulating tyrosine hydroxylase have attracted enormous attention for biomimetic synthesis of L-DOPA, but suffered from heterogeneity. Herein, a spherical porous iron-nitrogen-carbon nanozyme was developed for production of L-DOPA. Tannic acid chelated with ferrous ions to form a tannin-iron coordination framework as a carbon precursor. Iron and nitrogen co-doped carbon nanospheres were assembled via an evaporation-induced self-assembly process using urea as a nitrogen source, F127 as a soft template, and formaldehyde as a crosslinker. The nanozyme was obtained after carbonization and acid etching. The nanozyme possessed a dispersive iron atom anchored in the Fe-N coordination structure as an active site to mimic the active center of tyrosine hydroxylase. The material showed spherical morphology, uniform size, high specific surface area, a mesoporous structure and easy magnetic separation. The structural properties could promote the density and accessibility of active sites and facilitate mass transport and electron transfer. The nanozyme exhibited high activity to catalyze the hydroxylation of tyrosine to L-DOPA as tyrosine hydroxylase in the presence of ascorbic acid and hydrogen peroxide. The titer of DOPA reached 1.2 mM. The nanozyme showed good reusability and comparable enzyme kinetics to tyrosine hydroxylase with a Michaelis-Menten constant of 2.3 mM. The major active species was the hydroxyl radical. Biomimetic simulation of tyrosine hydroxylase using a nanozyme with a fine structure provided a new route for the efficient production of L-DOPA.

Synthesis of poly (L-cysteine)/g-C3N4 modified glassy carbon electrodes for electrochemical detection of methotrexate as a medicine for treatment of breast cancer in pharmaceutical fluid samples

Analyzing the levels of anticancer medications in biological samples and body fluids reveals important details on the course and effects of chemotherapy. p (L-Cys)/graphitic-carbon nitride (g-C₃N₄)/GCE, a modified glassy carbon electrode, was created for the current study's electrochemical detection of methotrexate (MTX), a drug used to treat breast cancer, in pharmaceutical fluid samples. l-Cysteine was electro-polymerized on the surface of the g-C₃N₄/GCE after the g-C₃N₄ was first modified to prepare the p (L-Cys)/g-C₃N₄/GCE. Analyses of morphology and structure showed that well-crystalline p (L-Cys) on g-C₃N₄/GCE was successfully electropolymerized. Studying the electrochemical characteristics of p (L-Cys)/g-C₃N₄/GCE using CV and DPV techniques revealed a synergistic impact between g-C₃N₄ and l-cysteine that improved the stability and selectivity of the electrochemical oxidation of MTX while enhancing the electrochemical signal. Results showed that 7.5-780 μM was the linear range, and that 0.11841 μA/μM and 6 nM, respectively, were the sensitivity and limit of detection. The applicability of the suggested sensors was assessed using real pharmaceutical preparations, and the results showed that p (L-Cys)/g-C₃N₄/GCE had a high degree of precision. Five breast cancer patients who volunteered and provided prepared blood serum samples between the ages of 35 and 50 were used to examine the validity and accuracy of the proposed sensor in the current work for the determination of MTX. The results showed good recovery values (greater than 97.20%), appropriate accuracy (RSD less than 5.11%), and good agreement between the ELISA and DPV analysis results. These findings showed that p (L-Cys)/g-C₃N₄/GCE can be applied as a trustworthy MTX sensor for MTX level monitoring in blood samples and pharmaceutical samples.

Strong Spin Polarization Effect of Atomically Dispersed Metal Site Boosts the Selective Photocatalytic Nitrobenzene Hydrogenation to Aniline over Graphitic Carbon Nitride

Atomically dispersed catalysts (ADCs) with a well-defined structure are theoretically desirable for a high-selectivity photocatalytic reaction. However, achieving high product selectivity remains a practical challenge for ADCs-based photocatalysts. Herein, we reveal a spin polarization effect on achieving high product selectivity (95.0%) toward the photocatalytic nitrobenzene (PhNO₂) hydrogenation to aniline (PhNH₂) on atomically dispersed Fe site-loaded graphitic carbon nitride (Fe/g-C₃N₄). In combination with the Gibbs free energy diagram and electronic structure analysis, the origin of the photocatalytic performance is attributed not only to the strong metal-support interaction between the Fe site and g-C₃N₄, but more importantly to the strong spin polarization effect that promotes the potential-determining step (PDS) of *PhNO to *PhNOH. This work could be helpful for the design of ADCs-based photocatalysts in view of the spin polarization effect.

Engineering the electronic structure of high performance FeCo bimetallic cathode catalysts for microbial fuel cell application in treating wastewater

The development of high-performance, strong-durability and low-cost cathode catalysts toward oxygen reduction reaction (ORR) is of great significance for microbial fuel cells (MFCs). In this study, a series of bimetallic catalysts were synthesized by pyrolyzing a mixture of g-C₃N₄ and Fe, Co-tannic complex with various Fe/Co atomic ratios. The initial Fe/Co atomic ratio (3.5:0.5, 3:1, 2:2, 1:3) could regulate the electronic state, which effectively promoted the intrinsic electrocatalytic ORR activity. The alloy metal particles and metal-N_x sites presented on the catalyst surface. In addition, N-doped carbon interconnected network consisting of graphene-like and bamboo-like carbon nanotube structure derived from g-C₃N₄ provided more accessible active sites. The resultant Fe₃Co₁ catalyst calcined at 700 °C (Fe₃Co₁-700) exhibited high catalytic performance in neutral electrolyte with a half-wave potential of 0.661 V, exceeding that of the commercial Pt/C (0.6 V). As expected, the single chamber microbial fuel cell (SCMFC) with 1 mg/cm² loading of Fe₃Co₁-700 catalyst as the cathode catalyst afforded a maximum power density of 1425 mW/m², which was 10.5% higher than commercial Pt/C catalyst with the same loading (1290 mW/m²) and comparable to the Pt/C catalyst with 2.5 times higher loading ( 1430 mW/m²). Additionally, the Fe₃Co₁-700 also displayed better long-term stability over 1100 h than the Pt/C. This work provides an effective strategy for regulating the surface electronic state in the bimetallic electro-catalyst.

A simple and green method to prepare non-typical yolk/shell nanoreactor with dual-shells and multiple-cores: Enhanced catalytic activity and stability in Fenton-like reaction

Nowadays, non-typical yolk/shell structure has drawn much attentions due to the better catalytic performance than traditional counterparts (one yolk/one shell). In this study, ZIF-67 @Co₂SiO₄/SiO₂ yolk/shell structure was prepared in one-step at room temperature, in which ZIF-67 was served as the hard-template, H₂O was served as etchant and tetraethyl orthosilicat was served as the raw material for Co₂SiO₄/SiO₂. After calcination, the non-typical Co_xO_y @Co₂SiO₄/SiO₂ yolk/shell nanoreactor with Co₂SiO₄/SiO₂ dual-shells and Co_xO_y multiple-cores was obtained. On the one hand, more active sites were exposed on multiple-cores surface and better protection were provided by dual-shells. On the other hand, the sheet-like Co₂SiO₄ inner shell not only extended the travel path and retention time of pollutants trapped in cavity, but also separated the multiple-cores from aggregation. Therefore, the nanoreactor displayed the outstanding catalytic activity and recyclability in Fenton-like reaction. Metronidazole (20 mg/L) was completely degraded after 30 min, rhodamine B (50 mg/L) and methyl orange (20 mg/L) were removed even within 5.0 min. Catalytic mechanism indicated that ¹O₂ greatly contributed to the pollutant degradation. This paper presented a simple, versatile, green and energy-saving method for non-typical yolk/shell nanoreactor, and it could inspire to prepare other catalysts with high activity and stability for environmental remediation.

Macro/Micro-Environment Regulating Carbon-Supported Single-Atom Catalysts for Hydrogen/Oxygen Conversion Reactions

Single-atom catalysts (SACs) have attracted tremendous research interest due to their unique atomic structure, maximized atom utilization, and remarkable catalytic performance. Among the SACs, the carbon-supported SACs have been widely investigated due to their easily controlled properties of the carbon substrates, such as the tunable morphologies, ordered porosity, and abundant anchoring sites. The electrochemical performance of carbon-supported SACs is highly related to the morphological structure of carbon substrates (macro-environment) and the local coordination environments of center metals (micro-environment). This review aims to provide a comprehensive summary on the macro/micro-environment regulating carbon-supported SACs for highly efficient hydrogen/oxygen conversion reactions. The authors first summarize the macro-environment engineering strategies of carbon-supported SACs with altered specific surface areas and porous properties of the carbon substrates, facilitating the mass diffusion kinetics and structural stability. Then the micro-environment engineering strategies of carbon-supported SACs are discussed with the regulated atomic structure and electronic structure of metal centers, boosting the catalytic performance. Insights into the correlation between the co-boosted effect from the macro/micro-environments and catalytic activity for hydrogen/oxygen conversion reactions are summarized and discussed. Finally, the challenges and perspectives are addressed in building highly efficient carbon-supported SACs for practical applications.

Optimizing Microenvironment of Asymmetric N,S-Coordinated Single-Atom Fe via Axial Fifth Coordination toward Efficient Oxygen Electroreduction

Single-atom catalysts (SACs) are attractive candidates for oxygen reduction reaction (ORR). The catalytic performances of SACs are mainly determined by the surrounding microenvironment of single metal sites. Microenvironment engineering of SACs and understanding of the structure-activity relationship is critical, which remains challenging. Herein, a self-sacrificing strategy is developed to synthesize asymmetric N,S-coordinated single-atom Fe with axial fifth hydroxy (OH) coordination (Fe-N₃ S₁ OH) embedded in N,S codoped porous carbon nanospheres (FeN/SC). Such unique penta-coordination microenvironment is determined by cutting-edge techonologies aiding of systematic simulations. The as-obtained FeN/SC exhibits superior catalytic ORR activity, and showcases a half-wave potential of 0.882 V surpassing the benchmark Pt/C. Moreover, theoretical calculations confirmed the axial OH in FeN₃ S₁ OH can optimize 3d orbitals of Fe center to strengthen O₂ adsorption and enhance O₂ activation on Fe site, thus reducing the ORR barrier and accelerating ORR dynamics. Furthermore, FeN/SC containing H₂ O₂ fuel cell performs a high peak power density of 512 mW cm^-2 , and FeN/SC based Znair batteries show the peak power density of 203 and 49 mW cm^-2 in liquid and flexible all-solid-state configurations, respectively. This study offers a new platform for fundamentally understand the axial fifth coordination in asymmetrical planar single-atom metal sites for electrocatalysis.

Atomically Dispersed Mo Sites Anchored on Multichannel Carbon Nanofibers toward Superior Electrocatalytic Hydrogen Evolution

Developing affordable and efficient electrocatalysts as precious metal alternatives toward the hydrogen evolution reaction (HER) is crucially essential for the substantial progress of sustainable H₂ energy-related technologies. The dual manipulation of coordination chemistry and geometric configuration for single-atom catalysts (SACs) has emerged as a powerful strategy to surmount the thermodynamic and kinetic dilemmas for high-efficiency electrocatalysis. We herein rationally designed N-doped multichannel carbon nanofibers supporting atomically dispersed Mo sites coordinated with C, N, and O triple components (labeled as Mo@NMCNFs hereafter) as a superior HER electrocatalyst. Systematic characterizations revealed that the local coordination microenvironment of Mo is determined to be a Mo-O₁N₁C₂ moiety, which was theoretically probed to be the energetically favorable configuration for H intermediate adsorption by density functional theory calculations. Structurally, the multichannel porous carbon nanofibers with open ends could effectively enlarge the exposure of active sites, facilitate mass diffusion/charge transfer, and accelerate H₂ release, leading to promoted reaction kinetics. Consequently, the optimized Mo@NMCNFs exhibited superior Pt-like HER performance in 0.5 M H₂SO₄ electrolyte with an overpotential of 66 mV at 10 mA cm^-2, a Tafel slope of 48.9 mV dec^-1, and excellent stability, outperforming a vast majority of the previously reported nonprecious HER electrocatalysts. The concept of both geometric and electronic engineering of SACs in this work may provide guidance for the design of high-efficiency molecule-like heterogeneous catalysts for a myriad of energy technologies.

Highly porous Fe/N/C catalyst for oxygen reduction: the importance of pores

Fe/N/C full of ultrafine Fe-based species and pores is synthesized by pyrolyzing a g-C₃N₄-coordinated Fe matrix embedded in carbon for oxygen reduction. Enhanced oxygen reduction activity is observed on Fe/N/C with higher pore volume and the Fe/N/C catalyst with the largest pore volume shows the highest half-wave potential of 0.890 V.

Multi-shelled hollow layered double hydroxides with enhanced performance for the oxygen evolution reaction

Hollow materials with a sophisticated structure are promising for various applications with boosted performances and innovative properties. Herein, we report an in situ transformation strategy using multi-layered MOFs as templates to fabricate multi-shelled hollow NiZnCoFe layered double hydroxides (LDHs), which outperformed the double- and single-shelled hollow LDHs and commercial IrO₂ in the oxygen evolution reaction.

Increasing the activity of the Cu/CuAl2O4/Al2O3 catalyst for the RWGS through preserving the Cu2+ ions

Cu-Al spinel oxide is a highly active catalyst for CO₂ conversion to CO. However, it suffers from low surface area. By depositing a silica layer, we protected the catalyst surface and preserved the Cu²⁺ ions during the calcination process. These ions form well-dispersed Cu sites which participate in the reaction.

Bimetallic conjugated microporous polymer derived B,N-doped porous carbon wrapped Co3Fe7 alloy composite as a bifunctional oxygen electrocatalyst for a breathing Zn–air battery

A B, N-codoped carbon-based bifunctional oxygen electrocatalyst was prepared. This presented outstanding catalytic activity for electrochemical oxygen reduction and evolution reactions and could be used as the catalyst for a breathing Zn–air battery.

Current trends and perspectives on emerging Fe-derived noble-metal-free oxygen electrocatalysts

This article discusses recent progress in the development of Fe-derived noble metal-free electrocatalysts, including the strategies used for design, synthesis, and assessment of their performance in alkaline conditions.

Screening the activity of single-atom catalysts for the catalytic oxidation of sulfur dioxide with a kinetic activity model

An accurate prediction model of catalytic activity is crucial for both structure design and activity regulation of catalysts. Here, a kinetic activity model is developed to study the activity of single-atom catalysts (SACs) in catalytic oxidation of sulfur dioxide. Using the adsorption energy of the oxygen atom as a descriptor, the catalytic activities of 132 SACs were explored. Our results indicate the highest activity when the adsorption energy of oxygen equals -0.83 eV. In detail, single-atom Pd catalyst exhibits the best catalytic activity with an energy barrier of 0.60 eV. Most importantly, this work provides a new insight for developing a highly accurate and robust prediction model for catalytic activity.

Cobalt and nitrogen codoped carbon nanotubes derived from a graphitic C3N4 template as an electrocatalyst for the oxygen reduction reaction

Sluggish oxygen reduction reaction kinetics have been a main obstacle for commercial application of fuel cells. To replace Pt-based noble metal electrocatalysts, it is crucial to develop economical materials as electrocatalysts. Herein, we provide a strategy to prepare Co and N codoped carbon nanotubes for efficient oxygen reduction reaction. The composites are synthesized by hydrothermal reaction followed by calcination at 900 °C. Graphitic carbon nitride is used as a template and nitrogen source, and citric acid and cobalt nitrate hexahydrate are used as carbon and cobalt sources, respectively. Due to the synergistic effect of Co and N codoping and increased specific surface area, the resulting Co and N codoped carbon nanotubes exhibit excellent catalytic performance. The present results provide experimental support for further development of electrocatalysts.

Graphitic carbon nitride quantum dots (g-C3N4) to improve photovoltaic performance of polymer solar cell by combining Förster resonance energy transfer (FRET) and morphological effects

In this study, multifunctionality of graphitic carbon nitride quantum dots (g-C3N4 QDs) have been explored as a photovoltaic booster for polymer solar cell. Facile synthesis method of g-C3N4 QDs using organic solvent like o-dichlorobenzene which is commonly used for cell fabrication, has been demonstrated. Photovoltaic effect formation and various effects of QDs on energy transfer, carrier transport and nanoscale film morphology of the devices have been investigated thoroughly by incorporating g-C3N4 QDs as a third component into a well-established material combination of P3HT: PC71BM blend films. While systematic variation of device performances was observed with varying concentration of QDs, at an optimal concentration of 2%, almost 40% performance improvement was achieved compared to the pristine devices. The g-C3N4 QDs were found to assist Förster resonance energy transfer (FRET) between the QDs and host polymer, improving overall energy harvesting capability of the devices. The emission spectra of g-C3N4 QDs (λ Ems = 400–550) and absorption spectra of P3HT (λ Abs = 400–600) were found to have overlapping features which enabled the QDs to transfer ultraviolet region photon energy to P3HT. The g-C3N4 QDs were also found to be favorable for maintaining nanoscale phase segregation of the active layer with improved crystallinity which is crucial for efficient exciton dissociation and faster charge extraction. The enhanced power conversion efficiency thus attributed to the combined consequences of improved morphology and FRET effect. This study opens new prospects for developing high-efficiency solution processable photovoltaic devices using g-C3N4 QDs as the third component of the active layer.

Embedding activated carbon nanospheres into polymer-derived porous carbon networks to boost electrocatalytic oxygen reduction

Activated carbon nanospheres were embedded into polymer-derived porous carbon to form heterostructures with improved surface area and ORR performance.

Metallic single-atoms confined in carbon nanomaterials for the electrocatalysis of oxygen reduction, oxygen evolution, and hydrogen evolution reactions

Recent advances of single-atom-based carbon nanomaterials for the ORR, OER, HER, and bifunctional electrocatalysis are covered in this review article.

Single atomic site catalysts: synthesis, characterization, and applications

Single atomic site catalysts (SASCs) have attracted great attention in heterogenous catalysis due to their maximized atomic utilization and unique electronic structure. This feature article summarizes the recent contributions of the authors in the synthesis, characterization, and applications of SASCs. Firstly, we disclose the tricks of our recent progress in the synthesis of SASCs, including impregnation of metal precursors on defect-rich supports, pyrolysis of polymer-encapsulated metals and isolation of contiguous atoms by alloying. Then, we show several key characterization technologies to identify the geometric and electronic structure of SASCs, and reveal the advantages and disadvantages of these characterization technologies. Finally, the applications of the SASCs in heterogenous catalysis are presented, which are classified into electrocatalysis and thermocatalysis, and the structure-function relationships are disclosed.