Development of a novel sensory material for rapid detection of mercury ions in various water sources: Solution and solid-state analysis

A xanthene propane nitrile-based sensor material was successfully prepared, and an attempt towards the preparation of polymer bead form was made for the sensitive or selective detection of mercury ions (Hg2+) in water. The sensor material in solution as well as in polymeric form showed amazing selectivity over other added metal ions with a naked eye color change, UV visible spectral and fluorescence spectral change, and a rapid and excellent color change from colorless to purple. The 1H NMR study exposed the probable binding site of the probe with the added mercury ion. In this study, the imine nitrogen and the C = O interact with the mercury ion, resulting in the ring opening of lactam with a vivid color change. The EDTA test was done to verify the reversible behavior of the probe and confirmed its reversibility by UV-visible and fluorescence spectral studies. The polymer bead made using this probe can be used as a tool for monitoring mercury ions in real time in different sources of water samples. The sensor molecule itself senses the mercury ion in its solid state by simple grinding and changes its color from pale yellow to deep purple. The sensor color change response is very rapid towards mercury detection, which is confirmed by the prepared test strip.

Sulfonamides as Optical Chemosensors

Sulfonamides are auspicious chemosensors which are capable to bind with ionic species through various ways like complexation, charge transfer, proton transfer etc. and produce a detection signal in the form of an optical change either in visible or UV-light and for electronic as well as fluorimetric spectra. Sulfonamides have gained much attention of analytical chemists these days as these are inexpensive, robust, green in nature and some what sensitive and selective to many anionic and cationic species. Due to their promising versatility in sensing properties, these are under great consideration in forensic, environmental, analytical and biochemistry laboratories. This review narrates how sulfonamides are being used to optically sense ionic species.

A Dipeptide-derived Dansyl Fluorescent Probe for the Detection of Cu2+ in Aqueous Solutions

A novel dansyl-based fluorescent probe (DG) was designed via the introduction of a dipeptide, glycyl-L-glutamine. DG showed good selectivity and sensitivity towards Cu2+ in aqueous solutions in the pH span of ~ 6-12. The coordination of Cu2+ with the dipeptide moiety led to the fluorescent quenching of the dansyl fluorophore. The association constant value for Cu2+ was 0.78 × 104 M- 1 in a 1 to 1 stoichiometric ratio. The detection limit in HEPES buffer solution (10 mM, pH 7.4) was 1.52 µM. DG also showed strong anti-interference capability in the presence of other metal ions. It was worth noting that DG maintained the detection ability towards Cu2+ in real water samples and cell imaging, implying the potential application opportunities in complicated environments.

An efficient chitosan-naphthalimide fluorescent probe for simultaneous detection and adsorption of Hg2+ and its application in seafood, water and soil environments

As a virulent heavy metal ion, Hg2+ will lead to a serious threat to ecosystem and human health. In this work, we reported a chitosan-naphthalimide fluorescent probe CS-NA-ITC for specific recognition and efficient adsorption of Hg2+. CS-NA-ITC showed no fluorescence in solution state, while the fluorescence intensity increased obviously at the presence of Hg2+, accompanied by the fluorescence color becomes from colorless to bright yellow. It displayed favorable properties like low detection limit (73 nM), extensive pH detection range (5-10) and excellent anti-interference ability. The binding pattern of CS-NA-ITC to Hg2+ was verified by Job's plot, XPS analysis and FT-IR test. In addition, CS-NA-ITC was utilized to recognition of Hg2+ in actual water and soil samples and seafood products. Furthermore, the CS-NA-ITC hydrogel could be employed as an efficient Hg2+ adsorbent with good reusability, which adsorption ability was enhanced compared to chitosan hydrogel.

Dual-ligand lanthanide metal-organic framework probe for ratiometric fluorescence detection of mercury ions in wastewater

By serving dipyridylic acid (DPA) and 2,5-dihydroxyterephthalic acid (DHTA) as the biligands, a novel lanthanide (Eu3+) metal-organic framework (MOF) namely Eu-DHTA/DPA was prepared for specific Hg2+ fluorescence determination. The dual-ligand approach can endows the resulting luminescent MOF with dual emission of ratiometric fluorescence and uniform size. Eu3+ produces intense red fluorescence when activated by the ligand DPA, while the other ligand DHTA produces yellow fluorescence. Under 273 nm excitation, the presence of Hg2+ in the monitoring environment causes an increase in the intensity of the DHTA fluorescence peak at 559 nm and a decrease in the intensity of the Eu3+ fluorescence peak at 616 nm. Hg2+ effectively quenches the fluorescence emission of the central metal Eu3+ in Eu-DHTA/DPA at 616 nm through a dynamic quenching effect. This recognition process occurs due to the coordination of Hg2+ with ligands such as benzene rings, carboxyl groups, and pyridine N in three-dimensional space. Hg2+ was detected by measuring the ratio between two fluorescence peaks (I559 nm/I616 nm) within the range 2-20 μM, achieving a remarkably low detection limit of 40 nM. The established ratiometric fluorescence method has been successfully applied to the determination of Hg2+ in industrial wastewater of complex composition. The method plays a crucial role in the rapid and sensitive monitoring of Hg2+ in real environmental samples. The recoveries ranged from 92.82% to 112.67% (n = 3) with relative standard deviations (RSD) below 4.8%. This study offers a convenient and effective method for constructing probes for Hg2+ monitoring, with practical applications in environmental monitoring.

A dicyanoisophorone-based ICT fluorescent probe for the detection of Hg2+ in water/food sample analysis and live cell imaging

Mercury ions are notoriously difficult to biodegradable, and its abnormal bioaccumulation in the human body through the food chain can cause various diseases. Therefore, the quantitative and real-time detection of Hg²⁺ is very extremely important. Herein, we have brilliant designed and synthesized (E)-O-(4-(2-(3-(dicyanomethylene)-5,5-dimethylcyclohex-1-en-1-yl)vinyl)phenyl) O-phenyl carbonothioate (ICM-Hg) as a selective fluorescent probe for Hg²⁺ detection in real samples and intracellular staining. ICM-Hg displayed high specificity toward Hg²⁺ by activating the intramolecular charge transfer (ICT) process, resulting in distinguished color change from colorless to bright yellow along with noticeable switch on yellow fluorescence emission. The fluorescent intensity of ICM-Hg at 585 nm shows a well linear relationship in the range of Hg²⁺ concentration (0-45 μM), and the detection of limit for Hg²⁺ is calculated to be 231 nM. Promisingly, ICM-Hg can efficiently detect Hg²⁺ in real samples including tap water, tea, shrimp, and crab with quantitative recovery as well as the intracellular fluorescence imaging.

Highly selective and sensitive detection of Hg2+ by a novel fluorescent probe with dual recognition sites

A novel thionocarbonate-coumarin-thiourea triad-based probe with dual recognition sites for sensing mercury (Hg²⁺) ion was developed. The synthesized probe possessed both fluorogenic ("off-on") and chromogenic (from colorless to blackish brown) sensing performance towards Hg²⁺ ions. The fluorescence intensity was increased by 70 fold after the addition of Hg²⁺. As expected, the probe exhibited excellent selectivity and sensitivity for Hg²⁺ compared to other common competitive metal ions. The fluorescence intensity of the probe improved linearly with the increase of the concentration of Hg²⁺ (0-40 μM). Also, the minimum limit of detection (LOD) of the synthesized probe was 0.12 μM. Considering the importance of test feasibility in the harsh environment, the developed probe was applicable for detecting Hg²⁺ ions over a broad working pH range of 3-11. It is reliable and qualifies for the quantitative determination of Hg²⁺ concentrations in actual water samples. Finally, the probe achieved the bioimaging performance of Hg²⁺ in living cells and plants with good biocompatibility.

Boric Acid Functional Fluorescent Covalent-Organic Framework for Sensitive and Selective Visualization of CH3Hg. ACS APPLIED MATERIALS & INTERFACES 2023;15:9524-9532. [PMID: 36757912 DOI: 10.1021/acsami.2c23302]

Methylmercury (CH3Hg+) recognition remains a challenging and imperative task due to its high toxicity and wide existence in the ecosystem. Herein, a novel fluorescent covalent-organic framework containing a boric acid functional group (COF-BA) was prepared by a postmodification strategy for CH3Hg+ detection. COF-BA served as a sensing platform for CH3Hg+ with fluorescence static quenching accompanied by fluorescence color changing from intense blue to colorless, and the detection limit was determined as 1.68 μM in a relatively narrow concentration range. COF-BA also exhibited superior selectivity toward CH3Hg+ detection. Furthermore, the spiked and recovery test in real water samples showed its efficient detection practicality. The detection mechanism of COF-BA toward CH3Hg+ was investigated. The recognitive boric acid group in COF-BA was first replaced by CH3Hg+. Then, the quinoline structure that served to limit the rotation of the imine bond was disrupted, leading to dramatic fluorescence quenching. The boric acid functional COF fluorescent probe can be a promising sensing platform for the detection of methylmercury and also provides new ideas for the construction of new fluorescent COF materials.

A simple strategy for the visual detection and discrimination of Hg2+ and CH3Hg+ species using fluorescent nanoaggregates

Fluorescent nanoaggregates (FNAs) based on phenanthroline-based amphiphiles show changes in solution color from colorless to yellow upon addition of both Hg²⁺ (LOD ∼4 ppb) and CH₃Hg⁺ (LOD ∼18 ppb). However, the extent of fluorescence quenching is more prominent with Hg²⁺ (∼12 fold) than with CH₃Hg⁺ (∼4 fold). Also, unlike Hg²⁺, the interaction of CH₃Hg⁺ needs more time, ∼10 min at room temperature. Experimental evidence indicates that both mercury species coordinate with the phenanthroline unit and facilitate the charge transfer interaction while destabilizing the nanoassembly. The lower charge density on CH₃Hg⁺ along with its large size compared to Hg²⁺ may be the reason for such observations. Interestingly, FNAs show a selective response towards CH₃Hg⁺ when pre-treated with EDTA. Further, analysis of heavy metal pollutants in drinking water and biological samples was performed. High recovery values ranging from 96% to 103.0% were estimated along with relatively small standard deviations (<3%). Low-cost, reusable test strips were designed for rapid, on-site detection of mercury species. Further, the in situ formed metal complexes are allowed to interact with thiol-containing amino acids. As expected, CH₃Hg⁺, being less thiophillic, endures less interaction with cysteine. Mechanistic investigations indicate that thiolated amino acids can bind with the metal ion center and form a tertiary complex (cooperative interaction).

Selective dual detection of Hg2+ and TATP based on amphiphilic conjugated polythiophene-quantum dot hybrid materials

The design of multifunctional sensors based on biocompatible hybrid materials consisting of conjugated polythiophene-quantum dots for multiple environmental pollutants is a promising strategy for the development of new monitoring technologies. Herein, we present a new approach for the "on-off-on" sensing of Hg²⁺ and triacetone triperoxide (TATP) based on amphiphilic polythiophene-coated CdTe QDs (PQDs, PLQY ∼78%). The emission of the PQDs is quenched by Hg²⁺ ions via electron transfer interactions. Based on the strong interaction between TATP and Hg²⁺ ions, the addition of TATP to the PQD-Hg²⁺ complex results in a remarkable recovery of the PQD emission. Under the optimized conditions, the PQD sensor shows a good linear response to Hg²⁺ and TATP with detection limits of 7.4 nM and 0.055 mg L^-1, respectively. Furthermore, the "on-off-on" sensor demonstrates good biocompatibility, high stability, and excellent selectivity in the presence of other metal ions and common explosives. Importantly, the proposed method can be used to determine the level of Hg²⁺ and TATP in environmental water samples.

An ultrasensitive ratiometric fluorescent probe for the detection of Hg2+ and its application in cell and zebrafish

Mercury is a highly toxic metal element, and the accumulation of mercury in the human body can cause great harm, including but not limited to brain damage, kidney damage and behavioral disorders. Therefore, an effective way to detect mercury ions in the environment is urgently needed. In this study, a novel fluorescent probe (CP-Hg) was synthesized with coumarin as the fluorophore and propanethiol as the recognition receptor. The probe was characterized with high sensitivity (detection limit is approximately 0.5 nM) and selectivity. Note that the probe can react with mercury ions with a distinct color change. In addition, it has been proved to have low toxicity and successfully applied to detect mercury in water samples, macrophages and zebrafish model.

The preparation of novel triphenylamine-based AIE-effect fluorescent probe for selectively detecting mercury(ii) ion in aqueous solution

A novel triphenylamine-based TPA-ME exhibits good AIE fluorescence in a DMF/Water system and excellent probe property for detecting Hg²⁺ in solution.

Imaging Hg2+-Induced Oxidative Stress by NIR Molecular Probe with "Dual-Key-and-Lock" Strategy

Mercury (Hg) is considered an extremely toxic heavy metal which is extremely harmful to both the human body and environment. In addition, Hg²⁺-induced oxidative stress also exerts a crucial role to play in pathophysiological mechanisms of mercury toxicity. Thus, efficient and specific fluorescent probes for imaging Hg²⁺-induced oxidative stress are necessary. In the present study, we rationally design a novel Hg²⁺-activated and ICT-based NIR emission fluorescent probe NIR-HO for sequentially monitoring the ONOO^- level with a "dual-key-and-lock" strategy. The probe NIR-HO showed rapid response and excellent specificity and sensitivity for the detection of Hg²⁺ and ONOO^- in vitro. Cell imaging demonstrated that Hg²⁺-induced oxidative stress was involved in ONOO^- upregulation. Also, GSH, NAC, and EDTA were employed as excellent detoxifying drugs against Hg²⁺-induced toxicity. Moreover, the probe NIR-HO was successfully used for imaging Hg²⁺ and ONOO^- in vivo. In brief, NIR-HO provides a simple and powerful approach which can be used to image Hg²⁺-induced oxidative stress in the pathological environment.