Building a smart surface with converse temperature-dependent wettability based on poly(acrylamide-co-acrylonitrile)

Biomimicking TRPM8: A Conversely Temperature-Dependent Nonionic Retrorse Nanochannel for Ion Flow Control

Ion channels play a crucial role in the transmembrane transport and signal transmission of substances. In animals, transient receptor potential vanilloid 1 (TRPV1) and transient receptor potential melastatin 8 (TRPM8) serve as temperature-sensing units in sensory nerve endings. TRPV1 allows cells to sense heat, while TRPM8 enables them to detect cold, both serving to protect living organisms from harmful substances and environments. However, almost all studies on artificial nanochannels have mainly focused on TRPV1-like "forward nanochannels" thus far, which are incapable of "backward" responding to heat. So, we constructed an innovational TRPM8-inspired "retrorse nanochannel" through internal modification of poly(acrylamide-co-acrylonitrile) [P(AAm-co-AN)] with an upper critical solution temperature (UCST). Our results demonstrated that the internally modified nanochannels exhibited rapid, stable, and reversible heat-closing capability and converse temperature dependence within the typical temperature range of 25-40 °C. The biomimetic ion channel can effectively function as a facile, precise, and reversible thermal gate for controlling the transport of ions and substances. It also offers a promising microscopic technology for managing thermal effects on the substance, fluid, energy, and even signal delivery.

Thermoresponsive Skin-like Fabric for Personal Comfort and Protection

Acting as a "second skin", clothing plays an indispensable role in providing comfort and protection in the wide range of environments in which we live. However, comfort and protection are often competing requirements and are difficult to improve simultaneously. By mimicking the exceptional thermoresponsive one-way liquid transport property of human skin, here we developed a scalable and ecofriendly skin-like fabric that has a tunable directional water transport rate while having excellent water repellency. The water transport rate is also temperature-responsive, just like skin. As the temperature increases, the wettability gradient in the spatially distributed channels (acting like "sweat glands") increases, promoting sweat transport and evaporative heat dissipation. As the temperature decreases, on the other hand, the wettability gradient diminishes, reducing liquid transport and evaporative heat loss, thereby promoting heat retention. The fabric is highly suitable for sportswear and functional clothing and can have wider applications, such as oil-water separation, fog harvesting, etc.

Porous Electrospun Films with Reversible Photoresponsive Microenvironmental Humidity Regulation: A Controllable Hydrogen-Bonding Synergistic Effect Exhibited by Acrylic Acid Segments

Suitable relative humidity is essential for the preservation of cultural relics, food storage, and so on. A special material that can regulate the relative humidity in the microenvironment is particularly important. In this work, several innovative electrospun films with reversible photoresponsive wettability and the ability to regulate microenvironmental relative humidity were prepared. The spiropyran unit of the synthesized copolymer played the most important role in humidity regulation due to its reversible transition between a nonpolar ring-closed state and a polar ring-opened state induced by alternating ultraviolet/visible illumination. More interestingly, the introduction of acrylic acid segments exhibited a controllable hydrogen bond synergistic effect for increasing the range of humidity regulation. The color change and the reversible change ranges of wettability and microenvironmental relative humidity under ultraviolet/visible irradiation are all closely related to the number of acrylic acid segments. Cassie theory, density functional theory (DFT), and interaction region indicator (IRI) analysis were used to characterize this phenomenon. Electrospinning is a promising method to achieve large-scale production that can put such material into practical applications.

Multiple strategies to control the hydrophilic-hydrophobic balance of P(DMA-co-DMAEMA-co-QDMAEMA) coatings

The regulation of the hydrophilic-hydrophobic balance of polymers has an important influence not only on their aggregation behavior in aqueous solution, but also on their adhesion properties on the surface of substrates and the applications of the modified surfaces. Based on this, a random copolymer poly(dopamine methacrylamide-co-2-(dimethylamino)ethyl methacrylate) (P(DMA-co-DMAEMA)) was synthesized as a starting polymer to generate P(DMA-co-DMAEMA-co-QDMAEMA) (PDDQ) derivatives by a programmable quaternization of the DMAEMA precursor. By adjusting the pH or temperature, both the aggregation behavior in aqueous solutions and the surface adhesive behavior on the substrate surfaces of PDDQ copolymers were regulated due to the hydrophilic-hydrophobic balance. Specifically, the surface adsorption of PDDQ copolymers on surfaces was enhanced by the increased hydrophobicity of PDDQ. Stainless steel meshes (SSM) modified with the PDDQ0 copolymer without quaternization showed a superoleophobicity in acidic aqueous media, which endowed it with improved oil-water separation performance. In addition, the hydrophilic-hydrophobic balance of PDDQs and their coatings could also be tuned by changing the ratio of DMAEMA to QDMAEMA in the copolymer. From PDDQ0 to PDDQ100, by increasing the hydrophilic QDMAEMA component of PDDQ copolymers, anti-protein properties and oil/water separation efficiency of the modified surfaces were also enhanced gradually. The results provided a reference for designing P(DMA-co-DMAEMA-co-QDMAEMA) coatings in different application environments.

A Novel Method for the Preparation of Poly (Acrylamide−co−Acrylonitrile) Upper Critical Solution Temperature Thermosensitive Hydrogel by the Partial Dehydration of Acrylamide Grafted Polypropylene Sheets

In an attempt to find a potential application of cell culture harvesting, a novel method for the preparation of an upper critical solution temperature (UCST) thermosensitive hydrogel was studied. An electron accelerator was used as the electron beam (EB) radiation source, and acrylamide (AAm) was first grafted onto the pre-irradiated polypropylene (PP) sheet. Then, the grafting layer of poly (acrylamide-co-acrylonitrile) (P (AAm-co-AN)) was obtained by the partial dehydration of the acylamino group into the cyano group in the solution mixture of sulfoxide chloride (SOCl₂) and dimethyl formamide (DMF). The effects of the absorbed dose, AAm concentration, reaction time, and temperature on the degree of grafting were studied, respectively. The effect of the SOCl₂ concentration on the conversion degree of the cyano group from the acylamino group was studied, followed by the temperature of the UCST. The UCST properties of the grafted samples with P (AAm-co-AN) were studied by quartz crystal microbalance (QCM) and atomic force microscope (AFM), respectively. The cytotoxicities of the hydrogels against cells were verified by CCK-8 studies.

Upper Critical Solution Temperature Polyvalent Scaffolds Aggregate and Exterminate Bacteria

Specific recognition and strong affinities of bacteria receptors with the host cell glycoconjugates pave the way to control the bacteria aggregation and kill bacteria. Herein, using aggregation-induced emission (AIE) molecules decorated upper critical solution temperature (UCST) polyvalent scaffold (PATC-GlcN), an approach toward visualizing bacteria aggregation and controlling bacteria-polyvalent scaffolds affinities under temperature stimulus is described. Polyvalent scaffolds with diblocks, one UCST block PATC of polyacrylamides showing a sharp UCST transition and typical AIE behavior, the second bacteria recognition block GlcN of hydrophilic glucosamine modified polyacrylamide, are prepared through a reversible addition and fragmentation chain transfer polymerization. Aggregated chain conformation of polyvalent scaffolds at temperature below UCST induces the aggregation of E. coli ATCC8739, because of the high density of glucosamine moieties, whereas beyond UCST, the hydrophilic state of the scaffolds dissociates the bacteria aggregation. The sweet-talking of bacteria toward the polyvalent scaffolds can be visualized by the fluorescent imaging technique, simultaneously. Due to the specific recognition of polyvalent scaffolds with bacteria, the photothermal agent IR780 loaded PATC-GlcN shows the targeted killing ability toward E. coli ATCC8739 in vitro and in vivo under NIR radiation.

Synthesis and Characterization of Temperature-Responsive N-Cyanomethylacrylamide-Containing Diblock Copolymer Assemblies in Water

We have previously demonstrated that poly(N-cyanomethylacrylamide) (PCMAm) exhibits a typical upper-critical solution temperature (UCST)-type transition, as long as the molar mass of the polymer is limited, which was made possible through the use of reversible addition-fragmentation chain transfer (RAFT) radical polymerization. In this research article, we use for the first time N-cyanomethylacrylamide (CMAm) in a typical aqueous dispersion polymerization conducted in the presence of poly(N,N-dimethylacrylamide) (PDMAm) macroRAFT agents. After assessing that well-defined PDMAm-b-PCMAm diblock copolymers were formed through this aqueous synthesis pathway, we characterized in depth the colloidal stability, morphology and temperature-responsiveness of the dispersions, notably using cryo-transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS), small angle X-ray scattering (SAXS) and turbidimetry. The combined analyses revealed that stable nanometric spheres, worms and vesicles could be prepared when the PDMAm block was sufficiently long. Concerning the thermoresponsiveness, only diblocks with a PCMAm block of a low degree of polymerization (DPn,PCMAm < 100) exhibited a UCST-type dissolution upon heating at low concentration. In contrast, for higher DPn,PCMAm, the diblock copolymer nano-objects did not disassemble. At sufficiently high temperatures, they rather exhibited a temperature-induced secondary aggregation of primary particles. In summary, we demonstrated that various morphologies of nano-objects could be obtained via a typical polymerization-induced self-assembly (PISA) process using PCMAm as the hydrophobic block. We believe that the development of this aqueous synthesis pathway of novel PCMAm-based thermoresponsive polymers will pave the way towards various applications, notably as thermoresponsive coatings and in the biomedical field.

Constrained thermoresponsive polymers - new insights into fundamentals and applications

In the last decades, numerous stimuli-responsive polymers have been developed and investigated regarding their switching properties. In particular, thermoresponsive polymers, which form a miscibility gap with the ambient solvent with a lower or upper critical demixing point depending on the temperature, have been intensively studied in solution. For the application of such polymers in novel sensors, drug delivery systems or as multifunctional coatings, they typically have to be transferred into specific arrangements, such as micelles, polymer films or grafted nanoparticles. However, it turns out that the thermodynamic concept for the phase transition of free polymer chains fails, when thermoresponsive polymers are assembled into such sterically confined architectures. Whereas many published studies focus on synthetic aspects as well as individual applications of thermoresponsive polymers, the underlying structure-property relationships governing the thermoresponse of sterically constrained assemblies, are still poorly understood. Furthermore, the clear majority of publications deals with polymers that exhibit a lower critical solution temperature (LCST) behavior, with PNIPAAM as their main representative. In contrast, for polymer arrangements with an upper critical solution temperature (UCST), there is only limited knowledge about preparation, application and precise physical understanding of the phase transition. This review article provides an overview about the current knowledge of thermoresponsive polymers with limited mobility focusing on UCST behavior and the possibilities for influencing their thermoresponsive switching characteristics. It comprises star polymers, micelles as well as polymer chains grafted to flat substrates and particulate inorganic surfaces. The elaboration of the physicochemical interplay between the architecture of the polymer assembly and the resulting thermoresponsive switching behavior will be in the foreground of this consideration.

Upper Critical Solution Temperature-Type Responsive Cyclodextrins with Characteristic Inclusion Abilities

Water-soluble and thermoresponsive macrocycles with stable inclusion toward guests are highly valuable to construct stimuli-responsive supramolecular materials for versatile applications. Here, we develop such macrocycles - ureido-substituted cyclodextrins (CDs) which exhibit unprecedented upper critical solution temperature (UCST) behavior in aqueous media. These novel CD derivatives showed good solubility in water at elevated temperature, but collapsed from water to form large coacervates upon cooling to low temperature. Their cloud points are greatly dependent on concentration and can be mediated through oxidation and chelation with silver ions. Significantly, the amphiphilicity of these CD derivatives is supportive to host-guest binding, which affords them inclusion abilities to guest dyes. The inclusion complexation remained nearly intact during thermally induced phase transitions, which is in contrast to the switchable inclusion behavior of lower critical solution temperature (LCST)-type CDs. Moreover, ureido-substituted CDs were exploited to co-encapsulate a pair of guest dyes whose fluorescence resonance energy transfer process can be switched by the UCST phase transition. We therefore believe these novel thermoresponsive CDs may form a new strategy for developing smart macrocycles and allow for exploring smart supramolecular materials.

Smart Bionic Surfaces with Switchable Wettability and Applications

In order to satisfy the needs of different applications and more complex intelligent devices, smart control of surface wettability will be necessary and desirable, which gradually become a hot spot and focus in the field of interface wetting. Herein, we review interfacial wetting states related to switchable wettability on superwettable materials, including several classical wetting models and liquid adhesive behaviors based on the surface of natural creatures with special wettability. This review mainly focuses on the recent developments of the smart surfaces with switchable wettability and the corresponding regulatory mechanisms under external stimuli, which is mainly governed by the transformation of surface chemical composition and geometrical structures. Among that, various external stimuli such as physical stimulation (temperature, light, electric, magnetic, mechanical stress), chemical stimulation (pH, ion, solvent) and dual or multi-triggered stimulation have been sought out to realize the regulation of surface wettability. Moreover, we also summarize the applications of smart surfaces in different fields, such as oil/water separation, programmable transportation, anti-biofouling, detection and delivery, smart soft robotic etc. Furthermore, current limitations and future perspective in the development of smart wetting surfaces are also given. This review aims to offer deep insights into the recent developments and responsive mechanisms in smart biomimetic surfaces with switchable wettability under external various stimuli, so as to provide a guidance for the design of smart surfaces and expand the scope of both fundamental research and practical applications.

Bioinspired Metal-Intermetallic Laminated Composites for the Fabrication of Superhydrophobic Surfaces with Responsive Wettability

Hundreds of copper and titanium foils were applied to prepare biomimetic metal-intermetallic laminated composites by diffusion bonding. The cross sections of the obtained diffusion bonded bulks were etched selectively with FeCl₃ solution to get regular microarray structures. This kind of microstructure was controlled accurately and promptly by simple parameter adjustment. The etched surfaces were modified with 1-dodecanethiol, and the water contact angles (WCAs) were measured. The relationship between the microstructure and wettability of the achieved material was discussed, and the reason for the anisotropic wettability was also analyzed. Then etched surfaces were anodized in different electrolyte solutions to obtain different nanostructures. The morphology and chemical compositions of the surfaces were analyzed. The surfaces with CuO nanostructures by modification show superhydrophobicity with self-cleaning, on which the WCA and water sliding angle are 160.9° and 0.8°, respectively. The surfaces with TiO₂ nanostructures without modification show ultraviolet light-responsive wettability. After modification with 11-mercaptoundecanoic acid and 1-decanethiol, the surfaces also exhibit pH-responsive wettability. The superhydrophobic surfaces with responsive wettability have potential applications in biotechnology and microfluidics.

Thermo-responsive wettability via surface roughness change on polymer-coated titanate nanorod brushes toward fast and multi-directional droplet transport

A novel approach for thermo-responsive wettability has been accomplished by surface roughness change induced by thermal expansion of paraffin coated on titanate nanostructures. The surface exhibits thermo-responsive and reversible wettability change in a hydrophobic regime; the surface shows superhydrophobicity with contact angles of ∼157° below 50 °C and ∼118° above 50 °C due to a decrease of surface roughness caused by thermally-expanded paraffin at higher temperatures. Reversible wettability change of ∼40° of a contact angle allows for fast and multi-directional droplet transport. The present approach affords a versatile selection of materials and wide variety of contact angles, promoting both scientific advancement and technology innovation in the field of smart surfaces.