Fabrication and evaluation of 3D printed poly(l-lactide) copolymer scaffolds for bone tissue engineering

The application of poly(L-lactic acid) (PLLA) in tissue engineering is limited due to its brittleness and uncontrollable degradation rate. In this study, the flexible p-dioxanone (PDO) and highly reactive glycolide (GA) units were introduced into PLLA segments by chemical modification to prepare poly(l-lactide-ran-p-dioxanone-ran-glycolide) (PLPG) copolymers. The copolymers were then processed into the PLPG scaffold by a 3D printing technology. The physicochemical properties of the PLPG copolymers were studied by NMR, DSC, XRD, GPC, and SEM. Furthermore, the mechanical properties, degradation properties, and biocompatibility of the PLPG scaffolds were also studied. The results showed that introducing PDO and GA units disrupted the regularity of PLLA, decreasing the crystallinity of the PLPG copolymers. However, introducing PDO and GA units could effectively improve the mechanical and degradation properties of the PLLA scaffolds. In vitro cell culture experiments indicated that the PLPG scaffolds supported proliferation, growth, and differentiation of MC3T3-E1 cells. The PLPG scaffolds reported herein, with controllable degradation rates and mechanical performance, may find applications in bone tissue engineering.

Bionic structure and blood compatibility of highly oriented homo-epitaxially crystallized poly(l-lactic acid)

A highly oriented poly(l-lactic acid) (PLLA), with a blood vessel-like biomimetic structure, was fabricated using solid-phase hot drawing technology and homo-epitaxial crystallization to improve the mechanical properties and biocompatibility of PLLA. Long chain branched PLLA (LCB-PLLA) was prepared through a two-step ring-opening reaction, and a consequent draw as high as 1000 % was achieved during the hot drawing. The modulus and tensile strength were found to have increased through the formation of oriented shish-kebab like crystals along the drawing direction during processing. Furthermore, PLLA nano-lamellae were formed on the surface of the oriented plates via the introduction of homo-epitaxial crystallization. The high degree of orientation and epitaxial crystallization substantially enhanced the biocompatibility of the PLLA by prolonging clotting time, decreasing the rate of hemolysis, and increasing the cell growth and reproduction of the osteoblasts.

Biodegradable membrane of poly(l-lactide acid-dioxanone-glycolide) and stereocomplex poly(lactide) with enhanced crystallization and biocompatibility

The membranes of poly(l-lactide acid-p-dioxanone-glycolide) (PLPG) with stereocomplex poly(lactic acid) (sc-PLA) were prepared by the solution blending way. It was observed that sc-PLA significantly heightened the crystallizing behavior of PLLA segments of the PLPG matrix. The crystallizing behavior displayed that the temperature of crystallization shifted to a higher range than that of PLPG. Moreover, the half-time of crystallization sharply decreased in value as the sc-PLA content increased in value on account of the pre-eminent nucleation ability of sc-PLA. TGA results revealed the thermal stability of the samples with the increase of sc-PLA compared to PLPG. Meanwhile, enzymatic degradation results indicated that the mass loss rate of the membrane decreased with the introduction of sc-PLA, but the overall degradation ability was still greater than that of PLLA. In the meantime, the biological experiment indicated that the membrane possessed low cytotoxicity.

Recent progress of preparation of branched poly(lactic acid) and its application in the modification of polylactic acid materials

Poly (lactic acid) (PLA) with branched structure has abundant terminal groups, high melt strength, good rheological properties, and excellent processability; it is a new research and application direction of PLA materials. This study mainly summarizes the molecular structure design, preparation methods, basic properties of branched PLA, and its application in modified PLA materials. The structure and properties of branched PLA prepared by ring-opening polymerization of monomer, functional group polycondensation, and chain extender in the processing process were introduced. The research progress of in situ formation of branched PLA by initiators, multifunctional monomers/additives through dynamic vulcanization, and irradiation induction was described. The effect of branched PLA on the structure and properties of linear PLA materials was analyzed. The role of branched PLA in improving the crystallization behavior, phase morphology, foaming properties, and mechanical properties of linear PLA materials was discussed. At the same time, its research progress in biomedicine and tissue engineering was analyzed. Branched PLA has excellent compatibility with PLA, which has important research value in regulating the structure and properties of PLA materials.

A Novel Stereocomplex Poly(lactic acid) with Shish-Kebab Crystals and Bionic Surface Structures as Bioimplant Materials for Tissue Engineering Applications

The development of green material possessing with great mechanical properties and biocompatibility has become a primary goal for high-performance biological material applications. Herein, the oriented shish-kebab crystals of stereocomplex poly(lactic acid) (SC-PLA) are first reported to be successfully fabricated through a feasible solid-state drawing (SSD) process to simultaneously enhance the mechanical performance and biocompatibility. The resultant biomaterial exhibits a tensile strength of 373 MPa and elongation about 9%, with elastic modulus about 8.1 GPa. Such an outstanding toughening effect is due to an amalgamation of enhanced crystallinity of epitaxial secondary growth lamellae and orientation degree of the fibrous backbone of the SC-PLA samples, both gradually increasing with the draw ratio of SSD increasing. Uniquely distinguished from the typical biomedical polymer with the smooth surface structure, the as-obtained SC-PLA samples possess a surface morphology of parallel microgrooves within ridge structures, attributing to the highly oriented fibrous backbone structure complemented with regularly arranged epitaxial lamellas. This unique trait well represents the human vascular endothelial microstructure that is desirable for cell adhesion-growth to extend its proliferation, differentiation, and activity on the surface of SC-PLA.

Improving Mechanical Properties and Biocompatibilities by Highly Oriented Long Chain Branching Poly(lactic acid) with Bionic Surface Structures

Exploiting the solid-state drawing (SSD) process toward polymer materials for medical implant devices is of significance to simultaneously improve the mechanical property and biocompatibility. Herein, for the first time, the bionic implants with a microvalley surface of oriented long chain branching PLA (b-PLA) was fabricated by a feasible SSD process. The as-obtained b-PLAs could not only show a high tensile strength (278.1 MPa) and modulus (4.32 GPa) but also bear a superior protein adsorption as high as 622 ng/cm². Such exceptional mechanical properties and biocompatibility could be ascribed to the SSD process-induced highly orientation degree and the morphology of parallel grooves within ridges structures, resulting in the greatly enhanced crystallinity and surface hydrophobicity as well as a biocompatible vascular endothelial microstructure for cell to adhesion and growth and thus an improved proliferation, differentiation, and activity of osteoblasts with spindle-shaped and spread morphology on surface of the b-PLAs. These findings may pave the way for designing the novel biomaterials for vascular stent or tissue engineering devices by the SSD process.

Construction of stereocomplex granular dams in luminescent biopolymer systems

Lessons from natural and artificial granular dams inspired the design of dam structures of stereocomplex granules in multicolor emissive biopolymer systems.