DNP NMR spectroscopy of cross-linked organic polymers: rational guidelines towards optimal sample preparation

Iridium Catalyst Immobilized on Crosslinked Polyethyleneimine for Continuous Hydrogen Production Using Formic Acid

Hydrogen is an alternative fuel that can play a critical role in achieving net zero emissions, leading to global environment sustainability. An iridium-immobilized catalyst based on polyethyleneimine (PEI) was synthesized and utilized for hydrogen production via formic acid dehydrogenation (FADH). Iridium complex is cross-linked with its ligand and PEI to form the immobilized catalyst, where the iridium content could be easily varied in the range of 1-10 %. The structure of the iridium-immobilized catalyst was confirmed using solid-state NMR, DNP NMR, and FTIR spectroscopies. The iridium-immobilized catalyst with PEI showed excellent catalytic activity for FADH, exhibiting the catalyst's highest turnover frequency (TOF) value of 73 200 h-1 and a large turnover number (TON) value of over 1 130 000. The catalyst could be used for continuous hydrogen production via FADH, exhibiting high durability for over 2 000 h with TON value of 332 889 without any degradation in catalytic activity. The obtained hydrogen gas was evaluated for power generation using a standard fuel cell, as well as achieved 5 h of stable power generation.

Supercritical CO2 impregnation process applied to polymer samples preparation for dynamic nuclear polarization solid-state NMR

In this study, supercritical CO₂ (scCO₂ ) was used to impregnate polymers with paramagnetic polarizing agents to prepare samples for dynamic nuclear polarization (DNP) solid-state NMR (ssNMR) experiments. As a proof of concept, we impregnated polystyrene samples with bTbK, which stands for bis-TEMPO-bisketal where TEMPO is 2,2,6,6-tetra-methylpiperindin-1-oxyl. Substantial DNP signal enhancements could be measured on DNP-enhanced ¹ H → ¹³ C cross-polarization (CP) magic-angle spinning (MAS) spectra recorded at 9.4 T and ~100 K, reaching a maximum value of 8 in the most favorable case, which appeared comparable or even higher than what is typically obtained on similar systems for former sample preparation methods. These results highlight the potential of scCO₂ impregnation as an efficient and possibly versatile methodology to prepare polymer samples for DNP ssNMR investigations.

DNP NMR Spectroscopy Enabled Direct Characterization of Polystyrene-supported Catalyst Species for Synthesis of Glycidyl Esters by Transesterification

Polymer-supported catalysts have been of great interest in organic syntheses, but have suffered from the difficulty in obtaining direct structural information regarding the catalyst species embedded in the polymer due to the limitations of most analytical methods. Here, we show that dynamic nuclear polarization (DNP)-enhanced solid-state NMR is ideally positioned to characterize the ubiquitous cross-linked polystyrene (PS)-supported catalysts, thus enabling molecular-level understanding and rational development. Ammonium-based catalysts, which show excellent catalytic activity and reusability for the transesterification of methyl esters with glycidol, giving glycidyl esters in high yields, were successfully characterized by DNP ¹⁵N NMR spectroscopy at ¹⁵N natural abundance. DNP ¹⁵N NMR shows in particular that the decomposition of quaternary alkylammonium moieties to tertiary amines was completely suppressed during the catalytic reaction. Furthermore, the dilute ring-opened product derived from glycidol and NO₃⁻ was directly characterized by DNP ¹⁵N CPMAS and ¹H–¹⁵N and ¹H–¹³C HETCOR NMR using a ¹⁵N enriched (NO₃) sample, supporting the view that the transesterification mechanism involves an alkoxide anion derived from an epoxide and NO₃⁻. In addition, the detailed analysis of a used catalyst indicated that the adsorption of products on the cationic center is the major deactivation step in this catalysis.

We demonstrated that DNP-enhanced NMR spectroscopy enables the direct and detailed characterization of polymer-supported alkylammonium catalysts.

Open and Closed Radicals: Local Geometry around Unpaired Electrons Governs Magic-Angle Spinning Dynamic Nuclear Polarization Performance

The development of magic-angle spinning dynamic nuclear polarization (MAS DNP) has allowed atomic-level characterization of materials for which conventional solid-state NMR is impractical due to the lack of sensitivity. The rapid progress of MAS DNP has been largely enabled through the understanding of rational design concepts for more efficient polarizing agents (PAs). Here, we identify a new design principle which has so far been overlooked. We find that the local geometry around the unpaired electron can change the DNP enhancement by an order of magnitude for two otherwise identical conformers. We present a set of 13 new stable mono- and dinitroxide PAs for MAS DNP NMR where this principle is demonstrated. The radicals are divided into two groups of isomers, named open (O-) and closed (C-), based on the ring conformations in the vicinity of the N-O bond. In all cases, the open conformers exhibit dramatically improved DNP performance as compared to the closed counterparts. In particular, a new urea-based biradical named HydrOPol and a mononitroxide O-MbPyTol yield enhancements of 330 ± 60 and 119 ± 25, respectively, at 9.4 T and 100 K, which are the highest enhancements reported so far in the aqueous solvents used here. We find that while the conformational changes do not significantly affect electron spin-spin distances, they do affect the distribution of the exchange couplings in these biradicals. Electron spin echo envelope modulation (ESEEM) experiments suggest that the improved performance of the open conformers is correlated with higher solvent accessibility.

Structural analysis of cross-linked poly(vinyl alcohol) using high-field DNP-NMR

Poly(vinyl alcohol) (PVOH) is a water-soluble synthetic polymer, widely used in materials for functional films and moldings, fiber fabric sizing agents, paper coating resins, and adhesives. PVOH is mainly applied in the form of an aqueous solution, yet after its application, insolubility (water resistance) is required. To achieve this, additives are introduced. These additives used with PVOH are cross-linking agents which react with the hydroxyl groups and modified functional groups in PVOH. Because of the poor reactivity of unmodified PVOH, it does not react with cross-linking agents that have functional reactive groups. Therefore, modified PVOH that reacts with a cross-linking agent more successfully is required. These chemical bonding sites are so low in abundance that it is difficult to characterize the cross-linking structure. Solid-state 13C NMR is a powerful technique that can be used for the structural analysis of a polymer material. However, its sensitivity is low, hence it is difficult to determine crosslinking in a polymer, as it makes up only a small proportion of the product. Therefore, solid-state 13C NMR sensitivity can be enhanced by high-field dynamic nuclear polarization (DNP) using strong electron polarization. In this study, the reaction of acetoacetylated PVOH with a cross-linking agent, adipic dihydrazide, was analyzed. This crosslinked PVOH is the most popular vinyl alcohol polymer on the commercial market. The sensitivity enhanced 13C NMR spectra reveal that the carbonyl of the acetoacetyl group of PVOH crosslinks with adipic hydrazide by forming an imine bond (>C[double bond, length as m-dash]N-) this study also shows that the product has only seven crosslinking sites per molecular chain with a polymerization degree of 1000 and is water resistant.

A comprehensive approach for the characterization of porous polymers using 13C and 15N dynamic nuclear polarization NMR spectroscopy

DNP enhanced solid-state NMR techniques are presented as powerful tools to characterize amorphous porous polymers that are of insoluble nature.