Vertically Oriented Quasi-2D Perovskite Grown In-Situ by Carbonyl Array-Synergized Crystallization for Direct X-Ray Detectors

Quasi-2D perovskite quantum wells are increasingly recognized as promising candidates for direct-conversion X-ray detection. However, the fabrication of oriented and uniformly thick quasi-2D perovskite films, crucial for effective high-energy X-ray detection, is hindered by the inherent challenges of preferential crystallization at the gas-liquid interface, resulting in poor film quality. In addressing this limitation, a carbonyl array-synergized crystallization (CSC) strategy is employed for the fabrication of thick films of a quasi-2D Ruddlesden-Popper (RP) phase perovskite, specifically PEA2MA4Pb5I16. The CSC strategy involves incorporating two forms of carbonyls in the perovskite precursor, generating large and dense intermediates. This design reduces the nucleation rate at the gas-liquid interface, enhances the binding energies of Pb2+ at (202) and (111) planes, and passivates ion vacancy defects. Consequently, the construction of high-quality thick films of PEA2MA4Pb5I16 RP perovskite quantum wells is achieved and characterized by vertical orientation and a pure well-width distribution. The corresponding PEA2MA4Pb5I16 RP perovskite X-ray detectors exhibit multi-dimensional advantages in performance compared to previous approaches and commercially available a-Se detectors. This CSC strategy promotes 2D perovskites as a candidate for next-generation large-area flat-panel X-ray detection systems.

Investigation of interactions between Jiuzao glutelin with resveratrol, quercetin, curcumin, and azelaic and potential improvement on physicochemical properties and antioxidant activities

The interactions among small molecular functional components (FCTs) within a food matrix have become a focal point for enhancing their stability and bioactivities. Jiuzao glutelin (JG) is a mixed plant protein within Jiuzao (a protein-rich baijiu distillation by-product). This study aimed to explore the interactions between JG and selected FCTs, including resveratrol (RES), quercetin (QUE), curcumin (CUR), and azelaic acid (AZA), and the consequential impact on stability and antioxidant activity of the complexes. The findings conclusively demonstrated that the interactions between JG and the FCTs significantly enhanced the storage stability of the complexes. Moreover, the antioxidant activity of the complexes exhibited improvement compared to their individual counterparts. This study underscores the notion that JG and FCTs mutually reinforce, exerting positive effects on stability and antioxidant activity. This symbiotic relationship can be strategically employed to augment the quality of proteins and enhance the functional properties of bioactive components through these interactions.

Enhanced optical absorption in two-dimensional Ruddlesden-Popper (C6H5CH2NH3)2PbI4 perovskites via biaxial strain and surface doping

Two-dimensional Ruddlesden-Popper (2D RP) perovskites can form layered protective materials using long organic cations as "barrier" caps, which is expected to solve the problem of instability of perovskites in the working environment. In this work, we systematically studied the 2D Ruddlesden-Popper (C6H5CH2NH3)2PbI4 hybrid perovskites using density functional theory. The results reveal that the 2D (C6H5CH2NH3)2PbI4 perovskites are semiconductors with band gaps of 2.22 eV. The optical absorption peak of the 2D (C6H5CH2NH3)2PbI4 perovskite structure is located at 532 nm in the visible region. Interestingly, the optical absorption spectrum of the 2D (C6H5CH2NH3)2PbI4 perovskite structure enhanced under suitable strains. The highest optical absorption peak appears in 2D (C6H5CH2NH3)2PbI4 under a -2% strain, and its theoretical photoelectric conversion efficiency is 28.5%. More interestingly, the replacement of surface I atoms with Br is another ways to enhance the optical absorption spectrum of the 2D (C6H5CH2NH3)2PbI4 perovskite structure. The optical absorption peak blue-shifts to the high energy region, which has higher solar energy flux density than the low energy region. The good stability, tuneable band gap and excellent theoretical photoelectric conversion efficiency of the 2D (C6H5CH2NH3)2PbI4 perovskite structure make it a promising candidate for novel 2D hybrid perovskite based photoelectronic devices and solar cells.

Spacer-Dependent and Pressure-Tuned Structures and Optoelectronic Properties of 2D Hybrid Halide Perovskites

Compared with their 3D counterparts, 2D hybrid organic-inorganic halide perovskites (HOIPs) exhibit enhanced chemical stabilities and superior optoelectronic properties, which can be further tuned by the application of external pressure. Here, we report the first high-pressure study on CMA₂PbI₄ (CMA = cylcohexanemethylammonium), a 2D HOIP with a soft organic spacer cation containing a flexible cyclohexyl ring, using UV-visible absorption, photoluminescence (PL) and vibrational spectroscopy, and synchrotron X-ray microdiffraction, all aided with density functional theory (DFT) calculations. Substantial anisotropic compression behavior is observed, as characterized by unprecedented negative linear compressibility along the b axis. Moreover, the pressure dependence of optoelectronic properties is found to be in strong contrast with those of 2D HOIPs with rigid spacer cations. DFT calculations help to understand the compression mechanisms that lead to pressure-induced bandgap narrowing. These findings highlight the important role of soft spacer cations in the pressure-tuned optoelectronic properties and provide guidance to the design of new 2D HOIPs.

Pressure-Induced Metallization of Lead-Free Halide Double Perovskite (NH4 )2 PtI6

Metallization has recently garnered significant interest due to its ability to greatly facilitate chemical reactions and dramatically change the properties of materials. Materials displaying metallization under low pressure are highly desired for understanding their potential properties. In this work, the effects of the pressure on the structural and electronic properties of lead-free halide double perovskite (NH4 )2 PtI6 are investigated systematically. Remarkably, an unprecedented bandgap narrowing down to the Shockley-Queisser limit is observed at a very low pressure of 0.12 GPa, showing great promise in optoelectronic applications. More interestingly, the metallization of (NH4 )2 PtI6 is initiated at 14.2 GPa, the lowest metallization pressure ever reported in halide perovskites, which is related to the continuous increase in the overlap between the valence and conduction band of I 5p orbital. Its structural evolution upon compression before the metallic transition is also tracked, from cubic Fm-3m to tetragonal P4/mnc and then to monoclinic C2/c phase, which is mainly associated with the rotation and distortions within the [PtI6 ]2- octahedra. These findings represent a significant step toward revealing the structure-property relationships of (NH4 )2 PtI6 , and also prove that high-pressure technique is an efficient tool to design and realize superior optoelectronic materials.

High-Pressure Structural Phase Transformation of Ferroelectric Bis-benzylammonium Lead Tetrachloride Studied by Raman Spectroscopy and X-ray Diffraction

Hybrid organic-inorganic 2-D perovskite bis-benzylammonium lead tetrachloride (BALC) is a room-temperature ferroelectric semiconductor. A structural phase transformation from the ambient Cmc2₁ structure is evident at 1.8 GPa from the Raman spectra, and this is confirmed by our high-pressure X-ray diffraction studies that point to a centrosymmetric structure Cmcm at 1.7 GPa. The ambient phase is recoverable on decompression. Using density functional theory calculations, we have studied the intermolecular and intramolecular vibrations to get an idea of the structural changes as a function of pressure. The high-pressure transition is identified to be due to a distortion in the PbCl₆ octahedra and a conformation change in the molecule. There are several discontinuities, broadening, and splitting of the Raman bands, corresponding to NH₃ units above 1.8 GPa that point to rearrangements in the hydrogen bond network in the new phase. The ambient structure shows anisotropic compressibility, with a bulk modulus of 14.5 ± 0.33 GPa. As the new phase is a centrosymmetric structure, BALC is expected to lose its ferroelectricity above ∼1.8 GPa.

Developing the Pressure-Temperature-Magnetic Field Phase Diagram of Multiferroic [(CH3)2NH2]Mn(HCOO)3

We combined Raman scattering and magnetic susceptibility to explore the properties of [(CH₃)₂NH₂]Mn(HCOO)₃ under compression. Analysis of the formate bending mode reveals a broad two-phase region surrounding the 4.2 GPa critical pressure that becomes increasingly sluggish below the order-disorder transition due to the extensive hydrogen-bonding network. Although the paraelectric and ferroelectric phases have different space groups at ambient-pressure conditions, they both drive toward P1 symmetry under compression. This is a direct consequence of how the order-disorder transition changes under pressure. We bring these findings together with prior magnetization work to create a pressure-temperature-magnetic field phase diagram, unveiling entanglement, competition, and a progression of symmetry-breaking effects that underlie functionality in this molecule-based multiferroic. That the high-pressure P1 phase is a subgroup of the ferroelectric Cc suggests the possibility of enhanced electric polarization as well as opportunity for strain control.