Crystalline Phase Regulates Microbial Methylation Potential of Mercury Bound to MoS2 Nanosheets: Implications for Safe Design of Mercury Removal Materials

Transition-metal dichalcogenides (TMDs) have shown great promise as selective and high-capacity sorbents for Hg(II) removal from water. Yet, their design should consider safe disposal of spent materials, particularly the subsequent formation of methylmercury (MeHg), a highly potent and bioaccumulative neurotoxin. Here, we show that microbial methylation of mercury bound to MoS2 nanosheets (a representative TMD material) is significant under anoxic conditions commonly encountered in landfills. Notably, the methylation potential is highly dependent on the phase compositions of MoS2. MeHg production was higher for 1T MoS2, as mercury bound to this phase primarily exists as surface complexes that are available for ligand exchange. In comparison, mercury on 2H MoS2 occurs largely in the form of precipitates, particularly monovalent mercury minerals (e.g., Hg2MoO4 and Hg2SO4) that are minimally bioavailable. Thus, even though 1T MoS2 is more effective in Hg(II) removal from aqueous solution due to its higher adsorption affinity and reductive ability, it poses a higher risk of MeHg formation after landfill disposal. These findings highlight the critical role of nanoscale surfaces in enriching heavy metals and subsequently regulating their bioavailability and risks and shed light on the safe design of heavy metal sorbent materials through surface structural modulation.

Ru Single Atom Dispersed on MoS2/MXene for Enhanced Sulfur Reduction Reaction in Lithium-Sulfur Batteries

The high theoretical energy density (2600 Wh kg-1) and low cost of lithium-sulfur batteries (LSBs) make them an ideal alternative for the next-generation energy storage system. Nevertheless, severe capacity degradation and low sulfur utilization resulting from shuttle effect hinder their commercialization. Herein, Single-atom Ru-doped 1T/2H MoS2 with enriched defects decorates V2C MXene (Ru-MoS2/MXene) produced by a new phase-engineering strategy employed as sulfur host to promote polysulfide adsorption and conversion reaction kinetics. The Ru single atom-doped adjusts the chemical environment of the MoS2/MXene to anchor polysulfide and acts as an efficient center to motivate the redox reaction. In addition, the rich defects of the MoS2 and ternary boundary among 1T/2H MoS2 and V2C accelerate the charge transfer and ion movements for the reaction. As expected, the Ru-MoS2/MXene/S cathode-based cell exhibits a high-rate capability of 684.3 mAh g-1 at 6 C. After 1000 cycles, the Ru-MoS2/MXene/S cell maintains an excellent cycling stability of 696 mAh g-1 at 2 C with a capacity degradation as low as 0.02% per cycle. Despite a high sulfur loading of 9.5 mg cm-2 and a lean electrolyte-to-sulfur ratio of 4.3, the cell achieves a high discharge capacity of 726 mAh g-1.

PEG-PVP-Assisted Hydrothermal Synthesis and Electrochemical Performance of N-Doped MoS2/C Composites as Anode Material for Lithium-Ion Batteries

Molybdenum disulfide shows promise as an anode material for lithium-ion batteries. However, its commercial potential has been constrained due to the poor conductivity and significant volume expansion during the charge/discharge cycles. To address these issues, in this study, N-doped MoS2/C composites (NMC) were prepared via an enhanced hydrothermal method, using ammonium molybdate and thiourea as molybdenum and sulfur sources, respectively. Polyethylene glycol 400 (PEG400) and polyvinylpyrrolidone (PVP) were added in the hydrothermal procedure as soft template surfactants and nitrogen/carbon sources. The crystal structure, morphology, elemental composition, and surface valence state of the N-doped MoS2/C composites were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), and X-ray photoelectron spectroscopy (XPS), respectively. The results indicate that the NMC prepared by this method are spherical particles with a nanoflower-like structure composed of MoS2 flakes, having an average particle size of about 500 nm. XPS analysis shows the existence of C and N elements in the samples as C-N, C-C, and pyrrolic N. As anodes for LIBs, the NMC without annealing deliver an initial discharge capacity of 548.2 mAh·g-1 at a current density of 500 mA·g-1. However, this capacity decays in the following cycles with a discharge capacity of 66.4 mAh·g-1 and a capacity retention rate of only 12% after 50 cycles. In contrast, the electrochemical properties of the counterparts are enhanced after annealing, which exhibits an initial discharge capacity of 575.9 mAh·g-1 and an ultimate discharge capacity of 669.2 mAh·g-1 after 70 cycles. The capacity retention rate decreases initially but later increases and elevated afterward to reach 116% at the 70th cycle, indicating an improvement in charge-discharge performance. The specimens after annealing have a smaller impedance, which indicates better charge transport and lithium-ion diffusion performance.

Stable 1T-MoS2 by Facile Phase Transition Synthesis for Efficient Electrocatalytic Oxygen Evolution Reaction

The 1T phase of MoS2 exhibits much higher electrocatalytic activity and better stability than the 2H phase. However, the harsh conditions of 1T phase synthesis remain a significant challenge for various extensions and applications of MoS2 . In this work, a simple hydrothermal-based synthesis method for the phase transition of MoS2 is being developed. For this, the NH2 -MIL-125(Ti) (Ti MOF) is successfully utilized to induce the phase transition of MoS2 from 2H to 1T, achieving a high conversion ratio of ≈78.3%. The optimum phase-induced MoS2 /Ti MOF heterostructure demonstrates enhanced oxygen evolution reaction (OER) performance, showing an overpotential of 290 mV at a current density of 10 mA cm-2 . The density functional theory (DFT) calculations are demonstrating the benefits of this phase transition, determining the electronic properties and OER performance of MoS2 .

Insights of the efficient hydrogen evolution reaction performance in bimetallic Au4Cu2 nanoclusters

The design of efficient electrocatalysts for improving hydrogen evolution reaction (HER) performance using atomically precise metal nanoclusters (NCs) is an emerging area of research. Here, we have studied the HER electrocatalytic performance of monometallic Cu6 and Au6 nanoclusters and bimetallic Au4Cu2 nanoclusters. A bimetallic Au4Cu2/MoS2 composite exhibits excellent HER catalytic activity with an overpotential (η10) of 155 mV vs. reversible hydrogen electrode observed at 10 mA cm-2 current density. The improved HER performance in Au4Cu2 is due to the increased electrochemically active surface area (ECSA), and Au4Cu2 NCs exhibits better stability than Cu6 and Au6 systems and bare MoS2. This augmentation offers a greater number of active sites for the favorable adsorption of reaction intermediates. Furthermore, by employing X-ray photoelectron spectroscopy (XPS) and Raman analysis, the kinetics of HER in the Au4Cu2/MoS2 composite were elucidated, attributing the favorable performance to better electronic interactions occurring at the interface between Au4Cu2 NCs and the MoS2 substrate. Theoretical analysis reveals that the inherent catalytic enhancement in Au4Cu2/MoS2 is due to favorable H atom adsorption over it and the smallest ΔGH* value. The downshift in the d-band of the Au4Cu2/MoS2 composite influences the binding energy of intermediate catalytic species. This new catalyst sheds light on the structure-property relationship for improving electrocatalytic performance at the atomic level.

Ligand Modulation of Active Sites to Promote Cobalt-Doped 1T-MoS2 Electrocatalytic Hydrogen Evolution in Alkaline Media

Highly efficient hydrogen evolution reaction (HER) electrocatalyst will determine the mass distributions of hydrogen-powered clean technologies, while still faces grand challenges. In this work, a synergistic ligand modulation plus Co doping strategy is applied to 1T-MoS2 catalyst via CoMo-metal-organic frameworks precursors, boosting the HER catalytic activity and durability of 1T-MoS2 . Confirmed by Cs corrected transmission electron microscope and X-ray absorption spectroscopy, the polydentate 1,2-bis(4-pyridyl)ethane ligand can stably link with two-dimensional 1T-MoS2 layers through cobalt sites to expand interlayer spacing of MoS2 (Co-1T-MoS2 -bpe), which promotes active site exposure, accelerates water dissociation, and optimizes the adsorption and desorption of H in alkaline HER processes. Theoretical calculations indicate the promotions in the electronic structure of 1T-MoS2 originate in the formation of three-dimensional metal-organic constructs by linking π-conjugated ligand, which weakens the hybridization between Mo-3d and S-2p orbitals, and in turn makes S-2p orbital more suitable for hybridization with H-1s orbital. Therefore, Co-1T-MoS2 -bpe exhibits excellent stability and exceedingly low overpotential for alkaline HER (118 mV at 10 mA cm-2 ). In addition, integrated into an anion-exchange membrane water electrolyzer, Co-1T-MoS2 -bpe is much superior to the Pt/C catalyst at the large current densities. This study provides a feasible ligand modulation strategy for designs of two-dimensional catalysts.

Stable Mo/1T-MoS2 Monolith Catalyst with a Metallic Interface for Large Current Water Splitting

To achieve global carbon neutrality, the realization of highly active and stable catalysts is critical for water splitting to produce green hydrogen (H₂). MoS₂ is considered to be the most promising non-precious metal catalyst for H₂ evolution because of its excellent properties. Herein, we report a metal-phase MoS₂ (1T-MoS₂) synthesized using a simple hydrothermal method. Using a similar procedure, we synthesize a monolithic catalyst (MC) in which 1T-MoS₂ is vertically bonded to a metal molybdenum plate via strong covalent bonds. These properties endow the MC with an extremely low-resistance interface and mechanical robustness, equipping it with outstanding durability and fast charge transfer. Results show that the MC can achieve stable water splitting at 350 mA cm^-2 current density with a low 400 mV overpotential. The MC exhibits negligible performance decay after 60 h of operation at a large current density of 350 mA cm^-2. This study provides a novel possible MC with robust and metallic interfaces to achieve technically high current water splitting to produce green H₂.

A multifunctional Fe2O3@MoS2@SDS Z-scheme nanocomposite: NIR enhanced bacterial inactivation, degradation antibiotics and inhibiting ARGs dissemination

To fight the flourishment of drug-resistant bacteria caused by antibiotics and the dissemination of antibiotic resistance genes (ARGs), it is of great urgency to develop multifunctional non-antibiotic agents with residual antibiotics elimination, and ARGs dissemination inhibition properties. Herein, sodium dodecyl sulfate (SDS) was modified onto the surface of Fe2O3 @MoS2 by ultrasonic method to obtain the Z-scheme, multifunctional Fe2O3 @MoS2 @SDS nanocomposites. The Fe2O3 @MoS2 @SDS (weight ratio of Fe2O3 @MoS2 and SDS was 1:1) was selected as the optimal agent. Under NIR irradiation, the Fe2O3 @MoS2 @SDS had a photothermal conversion efficiency of 45.96%, and could generate plenty of reactive oxygen species (ROS) at the same time. Under the synergy of photothermal and photodynamic, the antibacterial efficiency of Fe2O3 @MoS2 @SDS to E. coli, MRSA and P. aeruginosa could reach 99.95%, 99.97% and 99.58%, respectively, indicating excellent photothermal-photodynamic therapy (PPT) effect. The Fe2O3 @MoS2 @SDS also displayed photocatalytic activity in degradation of tetracycline (TC). The degradation rate of TC could reach 92.3% after 2 h of visible light irradiation. The obtained results indicated that a promising Fe2O3 @MoS2 @SDS composite based multifunctional nanoplatform could be constructed for NIR induced bacterial inactivation, antibiotics degradation and ARGs dissemination inhibition.

Photoelectrochemical Sensors with Near-Infrared-Responsive Reduced Graphene Oxide and MoS2 for Quantification of Escherichia Coli O157:H7

The photoelectric response is crucial for photocatalysis, having applications in solar cells and photoelectrochemical (PEC) sensors. In this study, we demonstrate improvements in the near-infrared (NIR)-light-driven PEC response via synergism between reduced graphene oxide (rGO) and MoS₂. Intriguingly, rGO modulates the morphology of MoS₂, facilitating carrier generation and migration, improving the PEC performance of the resultant rGO-MoS₂ sheets (GMS), and yielding an approximately 8-fold increase in the photocurrent compared to that of the pure MoS₂. Based on these findings, a NIR-responsive PEC immunosensing platform for the "turn-on" analysis of Escherichia coli O157:H7 on 980 nm light irradiation is reported. Specifically, the device is a three-dimensional magnetic screen-printed paper-based electrode assembled on a home-made PEC cell, and it enables integrated separation and detection. Using a sandwich-type immunocomplex bridged by E. coli O157:H7 and a GMS PEC probe, the immunosensing platform detected E. coli O157:H7 between 5.0 and 5.0 × 10⁶ CFU mL^-1, having an extremely low detection limit of 2.0 CFU mL^-1. Further, the assay enables the direct analysis of E. coli O157:H7 in milk without the need for pretreatment. Our findings suggest directions for the development of NIR-responsive paper-based PEC materials for portable biomolecule sensing.

SDS coated Fe3O4@MoS2 with NIR-enhanced photothermal-photodynamic therapy and antibiotic resistance gene dissemination inhibition functions

Infection caused by antibiotic-resistant bacteria is serious threat for public health, and calls for novel antibacterial agents with versatile functions. In particular, nanomaterial is one of promising candidates to fight the increasing antibiotic resistance crisis. Here, we synthesized distinct Fe₃O₄@MoS₂@SDS nanocomposites by ultrasonication assisted SDS coating on the Fe₃O₄@MoS₂. Photothermal investigation indicated that the Fe₃O₄@MoS₂@SDS showed excellent and stable photothermal performance and could be a NIR-induced photothermal reagent. It also displayed superior disinfection ability of Escherichia coli (E. coli), Methicillin-resistant Staphylococcus aureus (MRSA), and Pseudomonas aeruginosa (P. aeruginosa) and in vivo wound healing ability with the help of NIR irradiation. According to the results of electron paramagnetic resonance (EPR) and radical capture tests, plenty of superoxide, hydroxyl radicals, singlet oxygen and living cell reactive oxygen species can be observed under NIR irradiation. Besides, the synergistic effect Fe₃O₄@MoS₂@SDS and NIR irradiation eradicated almost all the biofilms of MRSA, so this kind of function enhanced the disinfection ability of Fe₃O₄@MoS₂@SDS under NIR irradiation. Furthermore, its inhibition effect on antibiotic resistance gene dissemination was also investigated. As expected, the Fe₃O₄@MoS₂@SDS could efficiently and broadly block the horizontal transfer of antibiotic resistance genes which mediated by conjugative plasmids, and its blocking effect was better than that we have reported Fe₃O₄@MoS₂. Overall, our findings revealed that the Fe₃O₄@MoS₂@SDS could be a potential candidate for photothermal-photodynamic therapy and antibiotic resistance gene dissemination inhibition.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Probing the Surface Chemistry of Nanoporous Gold via Electrochemical Characterization and Atom Probe Tomography

Surface chemistry information is crucial in understanding catalytic and sensing mechanisms. However, resolving the outermost monolayer composition of metallic nanoporous materials is challenging due to the high tortuosity of their morphology. In this study, we first elaborate on the capabilities and limitations of atom probe tomography (APT) in resolving interfaces. Subsequently, an electrochemical approach is designed to characterize the surface composition of nanoporous gold (NPG), developed from dealloying an inexpensive precursor (95 at. % Ag, 5 at. % Au), by the means of aqueous electrochemical measurements of the selective electrosorption of sulfide ions, which react strongly with Ag, but to a significantly lesser extent with Au. Accordingly, cyclic voltammetry was performed at various scan rates on NPG in alkaline aqueous solutions (0.2 M NaOH; pH 13) in the presence and absence of 1 mM Na2S. Calibrations via similar voltammetric measurements on pure polycrystalline Ag and Au surfaces allowed for a quantitative estimation for the Ag surface coverage of NPG. The sensitivity threshold for the detection of the adsorbate-Ag interaction was assessed to be approximately 2% Ag surface coverage. As curves measured on NPG only showed featureless capacitive currents, no faradaic charge density associated with sulfide electrosorption could be detected. This study opens a new avenue to gain further insight into the monolayer surface coverage of metallic nanoporous materials and assists in enhancement of the interpretation of APT reconstructions.

A novel electrochemical aflatoxin B1 immunosensor based on gold nanoparticle-decorated porous graphene nanoribbon and Ag nanocube-incorporated MoS2 nanosheets

The accurate and precisive monitoring of aflatoxin B1 (AFB1), which is one of the most hazardous mycotoxins, especially in agricultural products, is significant for human and environmental health.