Electrochemical and Non-Electrochemical Pathways in the Electrocatalytic Oxidation of Monosaccharides and Related Sugar Alcohols into Valuable Products

In this contribution, we review the electrochemical upgrading of saccharides (e.g., glucose) and sugar alcohols (e.g., glycerol) on metal and metal-oxide electrodes by drawing conclusions on common trends and differences between these two important classes of biobased compounds. For this purpose, we critically review the literature on the electrocatalytic oxidation of saccharides and sugar alcohols, seeking trends in the effect of reaction conditions and electrocatalyst design on the selectivity for the oxidation of specific functional groups toward value-added compounds. Importantly, we highlight and discuss the competition between electrochemical and non-electrochemical pathways. This is a crucial and yet often neglected aspect that should be taken into account and optimized for achieving the efficient electrocatalytic conversion of monosaccharides and related sugar alcohols into valuable products, which is a target of growing interest in the context of the electrification of the chemical industry combined with the utilization of renewable feedstock.

Improving Glycerol Electrooxidation Performance on Nanocubic PtCo Catalysts

As glycerol (GLY) has emerged as a highly functional and cheap platform molecule and as an abundant biodiesel production byproduct, possible conversion methods have been investigated. One of the promising approaches is the glycerol electrooxidation (GEOR) on noble metal-based catalysts. Although noble metals, especially Pt, are generally very stable at different pH and highly selective toward three-carbon (C3) products, their electrocatalytic performance can be further improved by morphology tuning and alloying with non-noble metals like Co. In the present study, cubic PtxCo100-x (x = 100, 80, and 60) nanoparticles were investigated in an alkaline medium at 20 and 40 °C. The effect of the composition and reaction conditions on the selectivity of the GEOR toward C3 products like lactate and glycerate was studied, and the reaction mechanism was discussed. The highest mass activity was found for Pt80Co20, although when the specific activity, glycerol conversion, and GEOR selectivity were compared, Pt60Co40 was the superior catalyst overall. In general, all catalysts, even those that are Co-rich, exhibited a high C3 product selectivity up to 95% at 0.67 V vs RHE. The low applied potential of 0.67 V vs RHE at 40 °C facilitated lactate formation with selectivity up to 72%. At the same time, the glycerate formation with a selectivity of up to 40%, as well as C-C bond cleavage, was more favored at 0.87 V vs RHE.

Tailored synthesis and optimization of nickel-molybdenum carbide-graphite nanofiber composite for enhanced ethanol electrooxidation

A novel nickel-molybdenum carbide-graphite nanofiber composite is introduced as an electrocatalyst for ethanol electrooxidation. The proposed nanofibers have been prepared by calcinating electrospun nanofibers composed of nickel acetate tetrahydrate, molybdenum chloride, and polyvinyl alcohol. The calcination process was conducted at different temperatures (700, 850, and 1000°C) under a nitrogen gas atmosphere with a heating rate of 2.5 deg/min and a holding time of 5 h. Physicochemical characterizations have indicated that nickel acetate is entirely reduced to nickel metal during the sintering process, and molybdenum has bonded with carbon to produce molybdenum carbide. At the same time, the used polymer has been pyrolyzed to produce a carbon nanofiber matrix embedding formed inorganic nanoparticles. Electrochemical measurements concluded that molybdenum content and calcination temperature should be controlled to maximize the electrocatalytic activity of the proposed catalyst. Typically, the oxidation peak current density was 28.5, 28.8, 51.5, 128.3, 25.6, and 3 mA/cm2 for nanofibers prepared from an electrospun solution containing 0, 5, 10, 15, 25, and 35 wt% molybdenum carbide, respectively. Moreover, it was observed that increasing the calcination temperature distinctly improves the electrocatalytic activity. Kinetic studies have indicated that the reaction order is close to zero with a reaction temperature-dependent value. Moreover, it was detected that the electrooxidation reaction of ethanol over the proposed nanofiber composite follows the Arrhenius equation. The determined activation energy is 33 kJ/mol, which indicates good catalytic activity for the introduced nanofibers. Through the application of a set of visualization-based tools and the general linear model (GLM), the optimal conditions that generate the highest current density were identified. The computations unveiled that the optimal parameter settings are as follows: Mo content at 15 wt.%, methanol concentration of 1.55 M, and reaction temperature of 59°C.

Rational Design and Facile Preparation of Palladium-Based Electrocatalysts for Small Molecules Oxidation

Direct liquid fuel cells (DLFCs) can convert the chemical energy of small organic molecules directly into electrical energy, which is a promising technique and always calls for electrocatalysts with high activity, stability and selectivity. Palladium (Pd)-based catalysts for DLFCs have been widely studied with the pursuit of ultra-high performance, however, most of the preparation routes require complex agents, multi-operation steps, even extreme experimental conditions, which are high-cost, energy-consuming, and not conducive to the scalable and sustainable production of catalysts. In this review, the recent progresses on not only the rational design strategies, but also the facile preparation methods of Pd-based electrocatalysts for small molecules oxidation reaction (SMOR) are comprehensively summarized. Based on the principles of green chemistry in material synthesis, the basic rules of "facile method" have been restricted, and the fabrication processes, perks and drawbacks, as well as practical applications of the "real" facile methods have been highlighted. The landscape of this review is to facilitate the mild preparation of efficient Pd-based electrocatalysts for SMOR, that is, to achieve a balance between "facile preparation" and "outstanding performance", thereby to stimulate the huge potential of sustainable nano-electrocatalysts in various research and industrial fields.

Electrochemical recycling of polymeric materials

Polymeric materials play a pivotal role in our modern world, offering a diverse range of applications. However, they have been designed with end-properties in mind over recyclability, leading to a crisis in their waste management. The recent emergence of electrochemical recycling methodologies for polymeric materials provides new perspectives on closing their life cycle, and to a larger extent, the plastic loop by transforming plastic waste into monomers, building blocks, or new polymers. In this context, we summarize electrochemical strategies developed for the recovery of building blocks, the functionalization of polymer chains as well as paired electrolysis and discuss how they can make an impact on plastic recycling, especially compared to traditional thermochemical approaches. Additionally, we explore potential directions that could revolutionize research in electrochemical plastic recycling, addressing associated challenges.

Strengthening the Synergy between Oxygen Vacancies in Electrocatalysts for Efficient Glycerol Electrooxidation

Defect-engineered bimetallic oxides exhibit high potential for the electrolysis of small organic molecules. However, the ambiguity in the relationship between the defect density and electrocatalytic performance makes it challenging to control the final products of multi-step multi-electron reactions in such electrocatalytic systems. In this study, controllable kinetics reduction is used to maximize the oxygen vacancy density of a Cu─Co oxide nanosheet (CuCo2O4 NS), which is used to catalyze the glycerol electrooxidation reaction (GOR). The CuCo2O4-x NS with the highest oxygen-vacancy density (CuCo2O4-x-2) oxidizes C3 molecules to C1 molecules with selectivity of almost 100% and a Faradaic efficiency of ≈99%, showing the best oxidation performance among all the modified catalysts. Systems with multiple oxygen vacancies in close proximity to each other synergistically facilitate the cleavage of C─C bonds. Density functional theory calculations confirm the ability of closely spaced oxygen vacancies to facilitate charge transfer between the catalyst and several key glycolic-acid (GCA) intermediates of the GOR process, thereby facilitating the decomposition of C2 intermediates to C1 molecules. This study reveals qualitatively in tuning the density of oxygen vacancies for altering the reaction pathway of GOR by the synergistic effects of spatial proximity of high-density oxygen vacancies.

Nanoporous Gold: From Structure Evolution to Functional Properties in Catalysis and Electrochemistry

Nanoporous gold (NPG) is characterized by a bicontinuous network of nanometer-sized metallic struts and interconnected pores formed spontaneously by oxidative dissolution of the less noble element from gold alloys. The resulting material exhibits decent catalytic activity for low-temperature, aerobic total as well as partial oxidation reactions, the oxidative coupling of methanol to methyl formate being the prototypical example. This review not only provides a critical discussion of ways to tune the morphology and composition of this material and its implication for catalysis and electrocatalysis, but will also exemplarily review the current mechanistic understanding of the partial oxidation of methanol using information from quantum chemical studies, model studies on single-crystal surfaces, gas phase catalysis, aerobic liquid phase oxidation, and electrocatalysis. In this respect, a particular focus will be on mechanistic aspects not well understood, yet. Apart from the mechanistic aspects of catalysis, best practice examples with respect to material preparation and characterization will be discussed. These can improve the reproducibility of the materials property such as the catalytic activity and selectivity as well as the scope of reactions being identified as the main challenges for a broader application of NPG in target-oriented organic synthesis.

Review of the Electrospinning Process and the Electro-Conversion of 5-Hydroxymethylfurfural (HMF) into Added-Value Chemicals

Electrochemical converters (electrolyzers, fuel cells, and batteries) have gained prominence during the last decade for the unavoidable energy transition and the sustainable synthesis of platform chemicals. One of the key elements of these systems is the electrode material on which the electrochemical reactions occur, and therefore its design will impact their performance. This review focuses on the electrospinning method by examining a number of features of experimental conditions. Electrospinning is a fiber-spinning technology used to produce three-dimensional and ultrafine fibers with tunable diameters and lengths. The thermal treatment and the different analyses are discussed to understand the changes in the polymer to create usable electrode materials. Electrospun fibers have unique properties such as high surface area, high porosity, tunable surface properties, and low cost, among others. Furthermore, a little introduction to the 5-hydroxymethylfurfural (HMF) electrooxidation coupled to H₂ production was included to show the benefit of upgrading biomass derivates in electrolyzers. Indeed, environmental and geopolitical constraints lead to shifts towards organic/inorganic electrosynthesis, which allows for one to dispense with polluting, toxic and expensive reagents. The electrooxidation of HMF instead of water (OER, oxygen evolution reaction) in an electrolyzer can be elegantly controlled to electro-synthesize added-value organic chemicals while lowering the required energy for CO₂-free H₂ production.

Emerging Electrochemical Processes to Decarbonize the Chemical Industry

Electrification is a potential approach to decarbonizing the chemical industry. Electrochemical processes, when they are powered by renewable electricity, have lower carbon footprints in comparison to conventional thermochemical routes. In this Perspective, we discuss the potential electrochemical routes for chemical production and provide our views on how electrochemical processes can be matured in academic research laboratories for future industrial applications. We first analyze the CO₂ emission in the manufacturing industry and conduct a survey of state of the art electrosynthesis methods in the three most emission-intensive areas: petrochemical production, nitrogen compound production, and metal smelting. Then, we identify the technical bottlenecks in electrifying chemical productions from both chemistry and engineering perspectives and propose potential strategies to tackle these issues. Finally, we provide our views on how electrochemical manufacturing can reduce carbon emissions in the chemical industry with the hope to inspire more research efforts in electrifying chemical manufacturing.

Preparation of New Glycerol-Based Dendrimers and Studies on Their Behavior toward Essential Oil Encapsulation

Two new families of glycerol-based dendrimers (glyceroladendrimers (GADs) and glyceroclickdendrimers (GCDs)) have been synthesized. Three generations have been isolated for each family with good yields and were fully analyzed. The encapsulation of essential oils (citronella and cinnamon) in GADs, GCDs, and also in previously described glycerodendrimers GD-PAMAMs and GD-PPIs has been studied by dynamic-headspace gas chromatography coupled to mass spectrometry. The retention rates obtained were from -35.8 to 26.65% for citronella essential oil and from 2.14 to 38.84% for the cinnamon essential oil. In addition, the best results were obtained with GD-PAMAMs and GD-PPIs of higher generation. The interaction study between essential oils or more precisely their major components have been performed through NMR spectroscopy (¹H NMR and DOSY NMR). No direct interactions between dendrimers and essential oils have been observed, but a surprising behavior of compression of the dendrimer in stable emulsions was observed. Indeed, the hydrodynamic radius of GD-PPI-3 has been reduced in the presence of cinnamon essential oil.

Selective production of formate over a CuO electrocatalyst by electrochemical and photoelectrochemical biomass valorisation

CuO acts as a selective (a) electrocatalyst for electrochemical formate production from various biomass wastes and (b) a cocatalyst on a hematite photoanode for photoelectrochemical formate production from glucose.

Recent Advances in Catalysis Based on Transition Metals Supported on Zeolites

This article reviews the current state and development of thermal catalytic processes using transition metals (TM) supported on zeolites (TM/Z), as well as the contribution of theoretical studies to understand the details of the catalytic processes. Structural features inherent to zeolites, and their corresponding properties such as ion exchange capacity, stable and very regular microporosity, the ability to create additional mesoporosity, as well as the potential chemical modification of their properties by isomorphic substitution of tetrahedral atoms in the crystal framework, make them unique catalyst carriers. New methods that modify zeolites, including sequential ion exchange, multiple isomorphic substitution, and the creation of hierarchically porous structures both during synthesis and in subsequent stages of post-synthetic processing, continue to be discovered. TM/Z catalysts can be applied to new processes such as CO₂ capture/conversion, methane activation/conversion, selective catalytic NO_x reduction (SCR-deNO_x), catalytic depolymerization, biomass conversion and H₂ production/storage.

Effect of Anode Material on Electrochemical Oxidation of Low Molecular Weight Alcohols-A Review

The growing climate crisis inspires one of the greatest challenges of the 21st century-developing novel power sources. One of the concepts that offer clean, non-fossil electricity production is fuel cells, especially when the role of fuel is played by simple organic molecules, such as low molecular weight alcohols. The greatest drawback of this technology is the lack of electrocatalytic materials that would enhance reaction kinetics and good stability under process conditions. Currently, electrodes for direct alcohol fuel cells (DAFCs) are mainly based on platinum, which not only provides a poor reaction rate but also readily deactivates because of poisoning by reaction products. Because of these disadvantages, many researchers have focused on developing novel electrode materials with electrocatalytic properties towards the oxidation of simple alcohols, such as methanol, ethanol, ethylene glycol or propanol. This paper presents the development of electrode materials and addresses future challenges that still need to be overcome before direct alcohol fuel cells can be commercialized.

Raw biomass electroreforming coupled to green hydrogen generation

Despite the tremendous progress of coupling organic electrooxidation with hydrogen generation in a hybrid electrolysis, electroreforming of raw biomass coupled to green hydrogen generation has not been reported yet due to the rigid polymeric structures of raw biomass. Herein, we electrooxidize the most abundant natural amino biopolymer chitin to acetate with over 90% yield in hybrid electrolysis. The overall energy consumption of electrolysis can be reduced by 15% due to the thermodynamically and kinetically more favorable chitin oxidation over water oxidation. In obvious contrast to small organics as the anodic reactant, the abundance of chitin endows the new oxidation reaction excellent scalability. A solar-driven electroreforming of chitin and chitin-containing shrimp shell waste is coupled to safe green hydrogen production thanks to the liquid anodic product and suppression of oxygen evolution. Our work thus demonstrates a scalable and safe process for resource upcycling and green hydrogen production for a sustainable energy future.

The scale-up of the coupling of water electroreduction (HER) with organic electrooxidation remains challenging. Here the authors address this challenge by coupling HER with electrooxidation of raw biomass chitin, cogenerating acetate and green hydrogen safely at high current density.

Power-to-X in Denmark: An Analysis of Strengths, Weaknesses, Opportunities and Threats

Power-to-X is an upcoming sector-coupling technology that can play a role in the decarbonisation of energy systems. The aim of this study was to widen the current knowledge of strengths, weaknesses, opportunities, and threats (SWOT) of this innovative technology in the Danish context by utilizing the analytic hierarchy process (AHP) to evaluate and compare perception of academic and industrial experts. The results of this analysis indicate that the external factors such as current policy framework are more important than the internal technology related factors. Further, positive factors predominate negative ones, with academic experts indicating strengths as the most important category and practitioners’ opportunities. All experts consider the country being a P2X knowledge hub as one of the most important factors, and in the given context of the Danish energy system, wind developments and Danish industrial environment, seizing this opportunity could be the biggest enabler for P2X success.

A Divergent Paired Electrochemical Process for the Conversion of Furfural Using a Divided-Cell Flow Microreactor

Furfural is a prominent, non-petroleum-based chemical feedstock material, derived from abundantly available hemicellulose. Hence, its derivatization into other useful biobased chemicals is a subject of high interest in contemporary academic and industrial research activities. While most strategies to convert furfural require energy-intensive reaction routes, the use of electrochemical activation allows to provide a sustainable and green alternative. Herein, a disparate approach for the conversion of furfural is reported based on a divergent paired electrochemical conversion, enabling the simultaneous production of 2(5H)-furanone via an anodic oxidation, and the generation of furfuryl alcohol and/or hydrofuroin via a cathodic reduction. Using water as solvent and NaBr as supporting electrolyte and electron-mediator, a green and sustainable process was developed, which maximizes productive use of electricity and minimizes byproduct formation.

Bare laser-synthesized palladium–gold alloy nanoparticles as efficient electrocatalysts for glucose oxidation for energy conversion applications

Laser-synthesized PdAu nanoparticles demonstrate a strong synergetic effect on glucose oxidation combining high catalytic activity with ultrafast kinetics at low potentials.