A double basic Sr-amino containing MOF as a highly stable heterogeneous catalyst

Synthesis and activation of pH-sensitive metal-organic framework Sr(BDC)∞ for oral drug delivery

Metal-organic frameworks (MOFs) are widely used in the biomedical industry. In this study, we developed a new method for obtaining a metal-organic structure of strontium and terephthalic acid, Sr(BDC), and an alternative activation method for removing DMF from the pores. Sr(BDC) MOFs were successfully prepared and characterized by XRD, FTIR, TGA, and SEM. The importance of the activation steps was confirmed by TGA, which showed that the Sr(BDC)(DMF) sample can contain up to a quarter of the solvent (DMF) before activation. In our study, IR spectroscopy confirmed the possibility of removing DMF by ethanol treatment from the Sr-BDC crystals. A comparative analysis of the effect of the activation method on the specific surface and pore size of Sr-BDC and its sorption properties using the model drug doxorubicin showed that due to the undeveloped surface of the Sr-(BDC)(DMF) sample, it is not possible to obtain an adsorption isotherm and determine the pore size distribution, thus showing the importance of the activation step. Cytotoxicity and apoptosis assays were carried out to study the biological activity of MOFs, and we observed relatively low toxicity in the tested concentration range after 48 h, with over 92% cell survival for Sr(BDC)(DMF) and Sr(BDC)(260 °C), with a decrease only in the highest concentration (800 mg L-1). Similar results were observed in our apoptosis assays, as they revealed low apoptotic population generation of 2.52%, 3.23%, and 2.77% for Sr(BDC)(DMF), Sr(BDC) and Sr(BDC)(260 °C), respectively. Overall, the findings indicate that ethanol-activated Sr(BDC) shows potential as a safe and effective material for drug delivery.

The use of metal-organic frameworks as heterogeneous catalysts

This article presents an overview of some of the available research studies of MOFs as catalysts. Catalytic studies of magnetic iron oxide nanoparticles with modified surfaces, MOFs with precious metals such as palladium, platinum, and silver, with zirconium, hafnium, copper, alkaline earth metals, lanthanides are generalized. The studies of the catalytic activity of micro- and mesoporous MOF structures are described.

Generation of Strong Basicity in Metal-Organic Frameworks: How Do Coordination Solvents Matter?

Solid strong bases with an ordered pore structure (OPS-SSBs) have attracted much attention because of their high catalytic activity and shape selectivity as heterogeneous catalysts in various reactions. Nevertheless, high temperatures are required to fabricate OPS-SSBs by using traditional methods. Herein, we report for the first time that the coordination solvents affect basicity generation in metal-organic frameworks (MOFs) greatly and that strong basicity can be formed at comparatively low temperatures. A typical MOF, MIL-53, was employed, and three different solvents, namely, water, methanol, and N,N-dimethylformamide (DMF), were coordinated, respectively, by means of solvent exchange. Thermogravimetry-mass spectrometer analysis shows that the conversion temperature of base precursor KNO₃ is quite different on MIL-53 coordinated with different solvents. The conversion of KNO₃ to basic sites takes place at 350, 300, and 250 °C on MIL-53 coordinated with water, methanol, and DMF, respectively. It is fascinating to observe the generation temperature of strongly basic sites at 250 °C, which is noticeably lower than that on various supports, such as mesoporous silica SBA-15 (600 °C), zeolite Y (700 °C), and metal oxide ZrO₂ (730 °C). This is due to the redox interaction between coordination solvents and KNO₃, leading to a significant decrease in the temperature for KNO₃ conversion. Consequently, OPS-SSBs were prepared successfully with an ordered pore structure and strong basicity. The obtained OPS-SSBs show good shape selectivity in Knoevenagel condensation of aromatic aldehydes with different active methylene compounds. Moreover, these solid bases are highly active in the synthesis of dimethyl carbonate through transesterification reaction. This work might open up a new avenue for the fabrication of various functional materials at low temperatures through redox interactions.

Strontium-Based MOFs Showing Dual Emission: Luminescence Thermometers and Toluene Sensors

This work reports on the preparation and optical characterization of two metal-organic frameworks (MOFs) based on strontium ions and 2-amino-1,4-benzenedicarboxylate (NH₂-bdc) ligand: i.e., [Sr(NH₂-bdc)(DMF)]_n (1) and {[Sr(NH₂-bdc)(Form)]·H₂O}_n (2) (where DMF = dimethylformamide and Form = formamide). Compound 1 has a 3D architecture built up from the linkage established by NH₂-bdc among metal-carboxylate rods, leaving significant microchannels that are largely occupied by DMF molecules coordinated to strontium centers. The solvent molecules play a crucial role in the photoluminescence (PL) properties, which has been deeply characterized by diffuse reflectance and variable-temperature emission. Interestingly, both materials present intriguing photoluminescence (PL) properties involving intense short-lived and long-lasting phosphorescence (LLP), though the latter is especially remarkable for compound 2 with a lifetime of 815 ms at low temperature. Conversely, the strong PL shown by 1 may be successfully exploited due to both its luminescent thermochromism observed in the RT to 10 K range and its solvent-dependent PL sensing capacity, imbuing this material with potential activity as a PL thermometer as well as a toluene detector in water solutions.

Alkaline earth-organic frameworks with amino derivatives of 2,6-naphthalene dicarboxylates: structural studies and fluorescence properties

Alkaline earth metal ion organic frameworks (AEMOFs) represent a relatively underexplored subcategory of metal-organic frameworks (MOFs). In this contribution, we present the synthesis and structural study of the new MOFs 1-8 based on the alkaline earth ions Mg2+, Ca2+, Sr2+ and Ba2+ and the amino substituted bridging ligands 4-aminonaphthalene-2,6-dicarboxylate (ANDC2-) and 4,8-diaminonaphthalene-2,6-dicarboxylate (DANDC2-). Compounds 1, 5, 6, 7 and 8 constitute rare examples of three-dimensional MOFs which feature square planar M4 secondary building units (SBUs) surrounded by eight bridging ditopic ligands. The underlying topology of MOFs 1, 5, 7 and 8 conforms to the 4-c pcb net which can be simplified to the 8-c bcu net, while 6 adopts the 4-c lta net which simplifies to the 8-c reo net. To the best of our knowledge these are the first examples of MOFs of their structural types formed by linear dicarboxylates instead of trigonal tricarboxylates or tetrahedral tetracarboxylates. Compounds 2, 3 and 4 also feature three dimensional networks with linear rod-shaped SBUs with the Ba2+ MOF 3 displaying an sra rod-net and MOFs 2 and 4 showing very complex rod-nets with so far unique topologies. Fluorescence studies revealed that the free ligands exhibit strong blue-green emission displaying considerable positive solvatochromism thereby pointing towards charge transfer excited states involving the shift of electron density from the amino groups to the aromatic core. Correspondingly, the MOFs display ligand based fluorescence with small differences in emission maxima possibly attributable to the difference in the charge density of the metal ions combined with the different environments around ligands in the crystal structures.

A series of four novel alkaline earth metal-organic frameworks constructed of Ca(ii), Sr(ii), Ba(ii) ions and tetrahedral MTB linker: structural diversity, stability study and low/high-pressure gas adsorption properties

A series of four novel microporous alkaline earth metal–organic frameworks (AE-MOFs) containing methanetetrabenzoate linker (MTB) with composition {[Ca₄(μ₈-MTB)₂]·2DMF·4H₂O}_n (UPJS-6), {[Ca₄(μ₄-O)(μ₈-MTB)_3/2(H₂O)₄]·4DMF·4H₂O}_n (UPJS-7), {[Sr₃(μ₇-MTB)_3/2]·4DMF·7H₂O}_n (UPJS-8) and {[Ba₃(μ₇-MTB)_3/2(H₂O)₆]·2DMF·4H₂O}_n (UPJS-9) (UPJS = University of Pavol Jozef Safarik) have been successfully prepared and characterized. The framework stability and thermal robustness of prepared materials were investigated using thermogravimetric analysis (TGA) and high-energy powder X-ray diffraction (HE-PXRD). MOFs were tested as adsorbents for different gases at various pressures and temperatures. Nitrogen and argon adsorption showed that the activated samples have moderate BET surface areas: 103 m² g⁻¹ (N₂)/126 m² g⁻¹ (Ar) for UPJS-7′′, 320 m² g⁻¹ (N₂)/358 m² g⁻¹ (Ar) for UPJS-9′′ and UPJS-8′′ adsorbs only a limited amount of N₂ and Ar. It should be noted that all prepared compounds adsorb carbon dioxide with storage capacities ranging from 3.9 to 2.4 wt% at 20 °C and 1 atm, and 16.4–13.5 wt% at 30 °C and 20 bar. Methane adsorption isotherms show no adsorption at low pressures and with increasing pressure the storage capacity increases to 4.0–2.9 wt% of CH₄ at 30 °C and 20 bar. Compounds displayed the highest hydrogen uptake of 3.7–1.8 wt% at −196 °C and 800 Torr among MTB containing MOFs.

Four novel microporous alkaline earth metal–organic frameworks (AE-MOFs) containing methanetetrabenzoate linker (MTB): UPJS-6, UPJS-7, UPJS-8 and UPJS-9 have been successfully prepared, characterized and tested as adsorbents for different gases.