Stimuli-Responsive Nanoradiosensitizers for Enhanced Cancer Radiotherapy

Radiotherapy (RT) has been a classical therapeutic method of cancer for several decades. It attracts tremendous attention for the precise and efficient treatment of local tumors with stimuli-responsive nanomaterials, which enhance RT. However, there are few systematic reviews summarizing the newly emerging stimuli-responsive mechanisms and strategies used for tumor radio-sensitization. Hence, this review provides a comprehensive overview of recently reported studies on stimuli-responsive nanomaterials for radio-sensitization. It includes four different approaches for sensitized RT, namely endogenous response, exogenous response, dual stimuli-response, and multi stimuli-response. Endogenous response involves various stimuli such as pH, hypoxia, GSH, and reactive oxygen species (ROS), and enzymes. On the other hand, exogenous response encompasses X-ray, light, and ultrasound. Dual stimuli-response combines pH/enzyme, pH/ultrasound, and ROS/light. Lastly, multi stimuli-response involves the combination of pH/ROS/GSH and X-ray/ROS/GSH. By elaborating on these responsive mechanisms and applying them to clinical RT diagnosis and treatment, these methods can enhance radiosensitive efficiency and minimize damage to surrounding normal tissues. Finally, this review discusses the additional challenges and perspectives related to stimuli-responsive nanomaterials for tumor radio-sensitization.

Engineering g-C3N4 with CuAl-layered double hydroxide in 2D/2D heterostructures for visible-light water splitting

CuAl layered double hydroxide (LDH) and polymeric carbon nitride (g-C3N4, GCNN) were assembled to construct a set of novel 2D/2D CuAl-LDH/GCNN heterostructures. These materials were tested towards H2 and O2 generation from water splitting using visible-light irradiation. Compared to pristine materials, the heterostructures displayed strongly enhanced visible-light H2 evolution, dependent on the LDH content, which acts as a cocatalyst, replacing the benchmark Pt. The optimal LDH loading was achieved for 0.2CuAl-LDH/GCNN that exhibited an increased number of active sites and showed a trade-off between charge separation efficiency and light shading, resulting in a 32-fold increase in the amount of evolved H2 compared with GCNN. In addition, the 0.2CuAl-LDH/GCNN heterostructure generated 1.5 times more O2 than GCNN. The higher photocatalytic performance was due to efficient charge carriers' separation at the heterojunction interface via an S-scheme (corroborated by work function, steady-state and time-resolved photoluminescence studies), enhanced utilisation of longer-wavelength photons (>460 nm) and higher surface area available for the catalytic reactions.

Construction of novel photocatalysts for efficient hydrogen evolution: The key role of natural halloysite nanotubes

Hydrogen (H2) evolution by photocatalytic water splitting is a potential strategy to solve worldwide energy shortage. Sulfide nanocatalysts showed great potential for H2 evolution, but suffered from low charge separation efficiency and easy agglomeration. In this work, ZnIn2S4 (ZIS) nanoflowers were anchored onto the surface of halloysite nanotubes (HNTs) modified by ethylenediaminetetraacetic acid (EDTA). Photocatalyst 3ZnIn2S4-HNTs/EDTA3 (3ZIS-HNTs/E3) displayed the optimum H2 evolution rate of 10.4 mmol·g-1·h-1, being 3.4 times as that of the original ZIS. Moreover, 3ZIS-HNTs/E3 presented satisfied property in the photocatalytic hydrogenation reaction of 4-nitrophenol to produce 4-aminophenol. HNTs as substrates not only hindered the growth and agglomeration of ZIS, but also induced more S vacancies in ZIS. The production of Schottky junctions between ZIS and Pt, the high utilization of light energy in tubular HNTs, and the trapping effect of EDTA for photogenerated h+ were all favorable for enhancing the catalytic property. The density functional theory (DFT) calculations showed that 3ZIS-HNTs/E3 with more S vacancies had the lowest adsorption energy and the most appropriate ΔGH* for H* to enhance the H2 evolution efficiency, which was consistent with the experimental catalytic results. This study contributes a novel thought for synthesizing composites on the basis of natural minerals for taking part in and enhancing the catalytic performance.

Superior Interfacial Contact Yields Efficient Electron Transfer Rate and Enhanced Solar Photocatalytic Hydrogen Generation in M/C3N4 Schottky Junctions

Various literature studies (Table 6) have reported that dispersion of metal nanoparticles (NPs) on graphitic carbon nitride g-C3N4 (M/CN) has considerably improved the photocatalytic hydrogen yield. It is understood that metal NPs create active sites on the surface of CN and act as a cocatalyst. However, the precise changes induced by different metal NPs on the surface of CN still elude us. Here, we report a thorough understanding and comparison of the morphology, metal-support interactions, interfacial charge transfer kinetics, and band characteristics in different M/CN (M = Pt, Pd, Au, Ag, Cu) correlated with photocatalytic activity. Among all metals, Pt/CN was found to be the best performer both under sunlight and UV-visible irradiation. Under sunlight, maximum H2@ 2.7 mmol/h/g was observed over Pt/CN followed by Pd/CN > Au/CN > Ag/CN > Cu/CN ≈ CN. The present study revealed that among all metals, Pt formed superior interfacial contact with g-C3N4 as compared to other metals. The maximum Schottky barrier height (Φb,Pt) of 0.66 V was observed at Pt/CN followed by Φb,Au/CN (0.46 V) and Φb,Pd/CN (0.05 V). The presence of electron-deficient Pt in Pt-XPS, decrease in the intensity of d-DOS of Pt near the Fermi level in VB-XPS, increase in CB tail states, and cathodic shift in Vfb in MS plots sufficiently confirmed strong metal-support interactions in Pt/CN. Due to the SPR effect, Au and Ag NPs suffered from agglomeration and poor dispersion during photodeposition. Finely dispersed Pt NPs (2-4 nm, 53% dispersion) successfully competed with shallow/deep trap states and drove the photogenerated electrons to active metallic sites in a drastically reduced time period as investigated by femtosecond transient absorption spectroscopy. Typically, an interfacial electron transfer rate, KIET,avg, of 2.5 × 1010 s-1 was observed for Pt/CN, while 0.087 × 1010 s-1 was observed in Au/CN. Band alignment/potentials at M/CN Schottky junctions were derived and most favorable in Pt/CN with CB tail states much above the water reduction potential; however, in the case of Pd, these extend much below the H+/H2 potential and hence behave like deep trap states. Thus, in Pd/CN (τ0 = 4200 ps, 49%) and Ag/CN (3870 ps, 53%), electron deep trapping dominates over charge transfer to active sites. The present study will help in designing futuristic new cocatalyst-photocatalyst systems.

Floating Carbon Nitride Composites for Practical Solar Reforming of Pre-Treated Wastes to Hydrogen Gas

Solar reforming (SR) is a promising green-energy technology that can use sunlight to mitigate biomass and plastic waste while producing hydrogen gas at ambient pressure and temperature. However, practical challenges, including photocatalyst lifetime, recyclability, and low production rates in turbid waste suspensions, limit SR's industrial potential. By immobilizing SR catalyst materials (carbon nitride/platinum; CN_x |Pt and carbon nitride/nickel phosphide; CN_x |Ni₂ P) on hollow glass microspheres (HGM), which act as floating supports enabling practical composite recycling, such limitations can be overcome. Substrates derived from plastic and biomass, including poly(ethylene terephthalate) (PET) and cellulose, are reformed by floating SR composites, which are reused for up to ten consecutive cycles under realistic, vertical simulated solar irradiation (AM1.5G), reaching activities of 1333 ± 240 µmol_H2 m^-2 h^-1 on pre-treated PET. Floating SR composites are also advantageous in realistic waste where turbidity prevents light absorption by non-floating catalyst powders, achieving 338.1 ± 1.1 µmol_H2 m^-2 h^-1 using floating CN_x versus non-detectable H₂ production with non-floating CN_x and a pre-treated PET bottle as substrate. Low Pt loadings (0.033 ± 0.0013% m/m) demonstrate consistent performance and recyclability, allowing efficient use of precious metals for SR hydrogen production from waste substrates at large areal scale (217 cm² ), taking an important step toward practical SR implementation.

Ni2P NPs loaded on methylthio-functionalized UiO-66 for boosting visible-light-driven photocatalytic H2 production

The UiO-66 family shows promising photocatalytic prospects in water splitting for hydrogen evolution under visible light irradiation due to its suitable band gap and adequate active sites. In this work, novel Ni₂P/UiO-66-(SCH₃)₂ composites were prepared by a simple solvothermal method. These as-synthesized samples were fully characterized by XRD, SEM, TEM, HRTEM, EDS, and XPS methods. The effectiveness of visible light driven photocatalytic water-splitting to produce hydrogen was investigated in the presence of sacrificial agents. The results showed that the optimal hydrogen yield of 5 wt% Ni₂P/UiO-66-(SCH₃)₂ is 3724.22 μmol g^-1 h^-1, reaching almost 187 times that of pristine UiO-66-(SCH₃)₂ (19.93 μmol g^-1 h^-1). Meanwhile, long term cycling stability tests also showed that Ni₂P/UiO-66-(SCH₃)₂ composites present an excellent photocatalytic H₂ production stability. Photoelectrochemical performance analysis revealed that the high catalytic activity of the composite materials could be associated with the synergistic effect of UiO-66-(SCH₃)₂ and Ni₂P. Light stimulates UiO-66-(SCH₃)₂ to generate electrons and holes, and Ni₂P as a cocatalyst could effectively transmit electrons and boost photogenerated charge separation. This work provides a reference for exploring UiO-66 family catalysts with good catalytic activity.

Development of nanotechnology-mediated precision radiotherapy for anti-metastasis and radioprotection

Radiotherapy (RT), including external beam RT and internal radiation therapy, uses high-energy ionizing radiation to kill tumor cells.

Construction of a multidimensional CdS@MoS2 heterojunction for enhancing the activity and transfer efficiency of photogenerated carriers

A CdS@MoS2 composite photocatalyst exhibits excellent photocatalytic activity to replace noble metals by constructing a n–n heterojunction.

A Water-Dispersible Carboxylated Carbon Nitride Nanoparticles-Based Electrochemical Platform for Direct Reporting of Hydroxyl Radical in Meat

In this paper, carboxylated carbon nitride nanoparticles (carboxylated-g-C₃N₄ NPs) were prepared through a one-step molten salts method. The synthesized material was characterized by transmission electron microscope (TEM), Fourier transform-infrared spectra (FTIR), and X-ray photoelectron spectroscopy (XPS), etc. An electrochemical sensor based on single-stranded oligonucleotide/carboxylated-g-C₃N₄/chitosan/glassy carbon electrode (ssDNA/carboxylated-g-C₃N₄/chitosan/GCE) was constructed for determination of the hydroxyl radical (^•OH), and methylene blue (MB) was used as a signal molecule. The sensor showed a suitable electrochemical response toward ^•OH from 4.06 to 122.79 fM with a detection limit of 1.35 fM. The selectivity, reproducibility, and stability were also presented. Application of the sensor to real meat samples (i.e., pork, chicken, shrimp, and sausage) was performed, and the results indicated the proposed method could be used to detect ^•OH in practical samples. The proposed sensor holds a great promise to be applied in the fields of food safety.

Conversion of Polyethylene Waste into Gaseous Hydrocarbons via Integrated Tandem Chemical-Photo/Electrocatalytic Processes

The chemical inertness of polyethylene makes chemical recycling challenging and motivates the development of new catalytic innovations to mitigate polymer waste. Current chemical recycling methods yield a complex mixture of liquid products, which is challenging to utilize in subsequent processes. Here, we present an oxidative depolymerization step utilizing diluted nitric acid to convert polyethylene into organic acids (40% organic acid yield), which can be coupled to a photo- or electrocatalytic decarboxylation reaction to produce hydrocarbons (individual hydrocarbon yields of 3 and 20%, respectively) with H₂ and CO₂ as gaseous byproducts. The integrated tandem process allows for the direct conversion of polyethylene into gaseous hydrocarbon products with an overall hydrocarbon yield of 1.0% for the oxidative/photocatalytic route and 7.6% for the oxidative/electrolytic route. The product selectivity is tunable with photocatalysis using TiO₂ or carbon nitride, yielding alkanes (ethane and propane), whereas electrocatalysis on carbon electrodes produces alkenes (ethylene and propylene). This two-step recycling process of plastics can use sunlight or renewable electricity to convert polyethylene into valuable, easily separable, gaseous platform chemicals.

Fabrication of S-scheme CdS-g-C3N4-graphene aerogel heterojunction for enhanced visible light driven photocatalysis

Constructing S-scheme heterojunction photocatalysts reveals a greatly improved separation efficiency of photogenerated carriers and enhanced harvesting ability of solar energy in photocatalytic field. Herein, a ternary CdS-g-C₃N₄-GA heterojunction has been fabricated by a facile ultrasound strategy, which behaved as a S-scheme heterojunction with an intimate interface formed, and GA played as an electronic transportation platform to promote the separation of photo-induced charge carriers, which was certified through photoelectrochemical techniques. Density functional theory calculations revealed that the different component in ternary CdS-g-C₃N₄-GA heterojunction demonstrated an obvious difference of work function, resulting in the charge transfer from CdS to g-C₃N₄ through GA with S-scheme principle. In the optimized conditions, the S-scheme CdS-g-C₃N₄-GA heterojunction not only displayed greatly enhanced photocatalytic performances for degradation of dye and antibiotic wastewater, but also improved photocatalytic H₂ production activity. In addition, the photocatalytic mechanism and driving force of charge transfer and separation in S-scheme CdS-g-C₃N₄-GA heterojunction were studied. This study offers a feasible strategy to construct a ternary S-scheme heterojunction for environmental and energy photocatalysis.

A cathodic photocorrosion-assisted strategy to construct a CdS/Pt heterojunction photocatalyst for enhanced photocatalytic hydrogen evolution

A novel strategy based on the cathodic photocorrosion effect of CdS was developed to fabricate a CdS/Pt heterojunction photocatalyst, achieving a remarkable enhancement for H₂ evolution.

Photocatalytic performance and mechanism insights of a S-scheme g-C3N4/Bi2MoO6 heterostructure in phenol degradation and hydrogen evolution reactions under visible light

Photocatalysis with potentially low cost and sustainable utilization is a typically environmentally benign method for the degradation of organic pollutants, but the rational design and fabrication of photocatalysts with high catalytic performance is still an enormous challenge. The efficient segregation of photogenerated electron-hole pairs in photocatalysts is a key and essential factor to decide photocatalytic activity. Herein, a novel Step-scheme (S-scheme) heterojunction photocatalyst, a g-C3N4/Bi2MoO6 (g-CN/BMO) composite, was successfully fabricated using g-C3N4 nanosheet-wrapped Bi2MoO6 microspheres. By adjusting the amount of g-C3N4 in BMO, a series of g-CN/BMO composites was prepared while optimizing posttreatment temperature. The resulting g-CN/BMO indicated well the photocatalytic performance for the degradation of phenol and hydrogen evolution reactions, especially, 100 g of g-CN was integrated into 100 g of the pre-calcined BMO at 200 °C to produce 100% g-CN/BMO-200, showing the highest photocatalytic performance compared to single composite BMO, BMO-200, g-CN, and g-CN/BMO-200 with other mass ratios. Combining the results from the density functional theory calculations and the results of X-ray photoelectron spectroscopy, for S-scheme heterojunction-structured g-CN/BMO-200, the internal electric field-, band edge bending- and coulomb interaction-driven efficient segregation of photogenerated electrons and holes at the interface is elucidated to explain the photocatalytic mechanism, and the resulting holes on the VB of BMO and electrons on the CB of g-CN are responsible for the improvement of the photocatalytic performance. This study revealed that for the S-scheme g-CN/BMO composite the internal electric field, band edge bending and coulomb interaction at the interface between g-CN and BMO can not only promote the effective segregation of electrons and holes, but also retain stronger redox ability. Such an investigation provides a facile and simple strategy to fabricate novel S-scheme heterojunction-structured photocatalysts for solar energy conversion.

g-C3N4 Modified by meso-Tetrahydroxyphenylchlorin for Photocatalytic Hydrogen Evolution Under Visible/Near-Infrared Light

A new photocatalyst denoted as mTHPC/pCN was prepared by modifying protonated graphitic carbon nitride (pCN) by meso-tetrahydroxyphenylchlorin (mTHPC). Relevant samples were characterized via various methods including zeta potential measurements, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, N₂ adsorption–desorption, transmission electron microscopy, ultraviolet-visible–near-infrared spectroscopy, electrochemical impedance spectroscopy, photocurrent response measurements, electron spin resonance spectroscopy, and phosphorescence spectroscopy. Compared with pCN, mTHPC/pCN shows enhanced absorption in the visible and near-infrared regions and thus higher photocatalytic activity in hydrogen evolution. A possible mechanism for mTHPC/pCN is proposed.

Photoreforming of biomass in metal salt hydrate solutions

Metal salt hydrate (MSH) solutions allow for the complete solubilisation of biomass and we demonstrate its use as a reaction medium for the photocatalytic reforming of lignocellulose. Different types of photocatalysts such as TiO₂ and carbon nitride can be employed in MSH to produce H₂ and organic products under more benign conditions than the commonly required extreme pH aqueous solutions.

Accelerated charge transfer of Cd0.5Zn0.5S@ZnS core–shell nano-spheres via decoration of Ni2P and g-C3N4 toward efficient visible-light-driven H2 production

Unique Cd_0.5Zn_0.5S@ZnS-Ni₂P/g-C₃N₄ hybrid nano-spheres demonstrate enhanced photostability, improved light-harvesting and facilitated charge separation toward efficient H₂ evolution from visible-light-driven water-splitting.