The Complex Reactivity of [(salen)Fe]2(μ-O) with HBpin and Its Implications in Catalysis

We report a detailed study into the method of precatalyst activation during alkyne cyclotrimerization. During these studies we have prepared a homologous series of Fe(III)-μ-oxo(salen) complexes and use a range of techniques including UV-vis, reaction monitoring studies, single crystal X-ray diffraction, NMR spectroscopy, and LIFDI mass spectrometry to provide experimental evidence for the nature of the on-cycle iron catalyst. These data infer the likelihood of ligand reduction, generating an iron(salan)-boryl complex as a key on-cycle intermediate. We use DFT studies to interrogate spin states, connecting this to experimentally identified diamagnetic and paramagnetic species. The extreme conformational flexibility of the salan system appears connected to challenges associated with crystallization of likely on-cycle species.

Iron(ii) carboxylates and simple carboxamides: an inexpensive and modular catalyst system for the synthesis of PLLA and PLLA-PCL block copolymers

The combination of inexpensive Fe(ii) acetate with low molecular weight aliphatic carboxamides in situ generates an effective catalyst system for the ring opening polymerisation of lactones. PLLAs were produced in melt conditions with molar masses of up to 15 kg mol-1, narrow dispersity (Đ = 1.03), and without racemisation. The catalytic system was investigated in detail with regard to Fe(ii) source, and steric and electronic effects of the amide's substituents. Furthermore, the synthesis of PLLA-PCL block copolymers of very low randomness was achieved. This commercially available, inexpensive, modular, and user-friendly catalyst mixture may be suitable for polymers with biomedical applications.

Heterodinuclear Mg(II)M(II) (M=Cr, Mn, Fe, Co, Ni, Cu and Zn) Complexes for the Ring Opening Copolymerization of Carbon Dioxide/Epoxide and Anhydride/Epoxide

The catalysed ring opening copolymerizations (ROCOP) of carbon dioxide/epoxide or anhydride/epoxide are controlled polymerizations that access useful polycarbonates and polyesters. Here, a systematic investigation of a series of heterodinuclear Mg(II)M(II) complexes reveals which metal combinations are most effective. The complexes combine different first row transition metals (M(II)) from Cr(II) to Zn(II), with Mg(II); all complexes are coordinated by the same macrocyclic ancillary ligand and by two acetate co-ligands. The complex syntheses and characterization data, as well as the polymerization data, for both carbon dioxide/cyclohexene oxide (CHO) and endo-norbornene anhydride (NA)/cyclohexene oxide, are reported. The fastest catalyst for both polymerizations is Mg(II)Co(II) which shows propagation rate constants (k_p ) of 34.7 mM^-1  s^-1 (CO₂ ) and 75.3 mM^-1  s^-1 (NA) (100 °C). The Mg(II)Fe(II) catalyst also shows excellent performances with equivalent rates for CO₂ /CHO ROCOP (k_p =34.7 mM^-1  s^-1 ) and may be preferable in terms of metallic abundance, low cost and low toxicity. Polymerization kinetics analyses reveal that the two lead catalysts show overall second order rate laws, with zeroth order dependencies in CO₂ or anhydride concentrations and first order dependencies in both catalyst and epoxide concentrations. Compared to the homodinuclear Mg(II)Mg(II) complex, nearly all the transition metal heterodinuclear complexes show synergic rate enhancements whilst maintaining high selectivity and polymerization control. These findings are relevant to the future design and optimization of copolymerization catalysts and should stimulate broader investigations of synergic heterodinuclear main group/transition metal catalysts.

Parts-Per-Million (Salen)Fe(III) Homogeneous Catalysts for the Production of Biodiesel from Waste Cooking Oils

This work describes the application of a library of iron(III)-salen catalysts in the production of biodiesel from vegetable oils. The conversion of neutral soybean oil is complete within two hours at 160–180 °C with low catalyst loading (0.10 mol%). A comparative screening reveals that the catalysts containing acetate as a fifth ligand are the most performing, and these have been conveniently used to convert acidic and waste cooking oils (WCO). WCOs were used as received without further purification to produce biodiesel in high yield (85–90%) under optimized conditions (2 h at 180 °C, catalyst loading 0.1 mol%, oil to alcohol molar ratio 1:20). The iron content in the lipophilic and hydrophilic phases of the crude mixture was investigated and the residual concentration in biodiesel was found to be in the order of 10–14 ppm, comparable to that contained in biodiesels from other sources.

Graphical Abstract

Simple Zn(ii) complexes for the production and degradation of polyesters

Nine new complexes based on thioether appended iminophenolate (ONS) ligands have been prepared and fully characterized in solution by NMR spectroscopy. Solid-state structures were also obtained for seven complexes. In solution, all complexes were monomeric. The complexes were highly active for the polymerization of purified rac-lactide ([M] : [Zn] : [BnOH] = 10 000 : 1 : 30 at 180 °C) reaching TOF values up to 250 000 h-1. The kinetics of the polymerization have been probed by in situ Raman spectroscopy. The rate of reaction was dramatically reduced using technical grade rac-lactide with increased initiator loading. To move towards a circular economy, it is vital that catalysts are developed to facilitate chemical recycling of commodity and emerging polymeric materials. In this vein, the complexes have been assessed for their ability to break down poly(lactic acid) and poly(ethylene terephthalate). The results from both the polymerization and degradation reactions are discussed in terms of ligand functionality.

N-Heterocyclic carbene iron complexes catalyze the ring-opening polymerization of lactide

Poly(lactic acid), PLA, which holds great promise as a biodegradable substitute of fossil resource-derived polyolefins, is industrially produced by the ring-opening polymerization of lactide using a potentially harmful tin catalyst. Based on mechanistic insights into the reaction of N-heterocyclic carbene (NHC) iron complexes with carbonyl substrates, we surmised and demonstrate here that such complexes are excellent catalysts for the bulk polymerization of lactide. We show that an iron complex with a triazolylidene NHC ligand is active at lactide/catalyst ratios of up to 10 000 : 1, produces polylactide with relatively high number-average molecular weights (up to 50 kg mol⁻¹) and relatively narrow dispersity (Đ ∼ 1.6), and features an apparent polymerization rate constant k_app of up to 8.5 × 10⁻³ s⁻¹, which is more than an order of magnitude higher than that of the industrially used tin catalyst. Kinetic studies and end-group analyses support that the catalytically active species is well defined and that the polymerization proceeds via a coordination–insertion mechanism. The robustness of the catalyst allows technical grade lactide to be polymerized, thus offering ample potential for application on larger scale in an industrially relevant setting.

Iron(ii) complexes containing a mesoionic triazolylidene ligand are highly efficient catalyst precursors for the ring opening polymerization of lactide to poly(lactic acid), surpassing other iron complexes and also industrially utilized Sn(oct)₂.

Electrochemical deposition of nickel from aqueous electrolytic baths prepared by dissolution of metallic powder

A new method of preparation of aqueous electrolyte baths for electrochemical deposition of nickel targets for medical accelerators is presented. It starts with fast dissolution of metallic Ni powder in a HNO3-free solvent. Such obtained raw solution does not require additional treatment aimed to removal nitrates, such as the acid evaporation and Ni salt precipitation-dissolution. It is used directly for preparation of the nickel plating baths after dilution with water, setting up pH value and after possible addition of H3BO3. The pH of the baths ranges from alkaline to acidic. Deposition of 95% of ca. 50 mg of Ni dissolved in the bath takes ca. 3.5 h for the alkaline electrolyte while for the acidic solution it requires ca. 7 h. The Ni deposits obtained from the acidic bath are physically and chemically more stable and possess smoother and crack-free surfaces as compared to the coatings deposited from the alkaline bath. A method of estimation of concentration of H2O2 in the electrolytic bath is also proposed.

Efficient and Reusable Iron Catalyst to Convert CO2 into Valuable Cyclic Carbonates

The production of cyclic carbonates from CO2 cycloaddition to epoxides, using the C-scorpionate iron(II) complex [FeCl2{κ3-HC(pz)3}] (pz = 1H-pyrazol-1-yl) as a catalyst, is achieved in excellent yields (up to 98%) in a tailor-made ionic liquid (IL) medium under mild conditions (80 °C; 1-8 bar). A favorable synergistic catalytic effect was found in the [FeCl2{κ3-HC(pz)3}]/IL system. Notably, in addition to exhibiting remarkable activity, the catalyst is stable during ten consecutive cycles, the first decrease (11%) on the cyclic carbonate yield being observed during the 11th cycle. The use of C-scorpionate complexes in ionic liquids to afford cyclic carbonates is presented herein for the first time.

Salen-type aluminum and zinc complexes as two-faced Janus compounds: contribution to molecular sensing and polymerization catalysis

The aim of the present review is to highlight the most recent achievements in different fields of application of salen-based zinc and aluminum complexes. More specifically this article focuses on the use of aluminum and zinc salen-type complexes as optical probes for biologically relevant molecules, as catalysts for the ring opening polymerization (ROP) of cyclic esters and co-polymerization of epoxides and anhydrides (ROCOP) and in the chemical fixation of carbon dioxide (CO2). The intention is to provide an overview of the most recent results from our group within the framework of the state-of-art-results in the literature.

Salalen vs. thiolen: in the ring(-opening of epoxide and cyclic carbonate formation)

A range of Fe(iii)-salalen and -thiolen–chloride complexes have been prepared and are shown to be active catalysts for the selective coupling of CO₂ and cyclohexene oxide (CHO).