Peptide-modified carbon dot aggregates for ultrasensitive detection of lipopolysaccharide through aggregation-induced emission enhancement

This study fabricated yellow-emitting CDs (Y-CDs) by hydrothermal treatment of citric acid and urea and applied them as a fluorescence turn-on platform for sensitive and selective detection of lipopolysaccharide (LPS) based on the non-shifted AIEE of peptide-stabilized CD aggregates. The designed peptide (named K3) consisting of aggregation-active and LPS-recognition units triggered the aggregation of Y-CDs, switching on their fluorescence through the blue-shifted AIEE process. The formed K3-stabilized Y-CD aggregates (K3-YCDAs) specifically interacted with LPS at neutral pH, demonstrating that the sequence of the decorated peptide was highly connected with their selectivity and sensitivity. The K3-YCDAs provided a fast response time (within 5 min) to detect LPS with a quantification range of 0.5-100.0 nM and a limit of detection (LOD, signal-to-noise ratio of 3) of 300.0 pM. By integrating ultrafiltration membranes as a concentration device with K3-YCDAs as a sensing probe, the LOD for LPS was further reduced to 3.0 pM. The determination of picomolar levels of plasma LPS by the K3-YCDAs coupled to the centrifugation ultrafiltration was demonstrated to fall within the specificity range of clinical interest for sepsis patients. Also, the K3-YCDAs served as a fluorescent probe to selectively image and quantify E. coli cells. The distinct advantages of the K3-YCDAs for LPS include fast response time, wide linear range, low detection limit, and excellent selectivity compared to previously reported sensors.

Simple and Rapid Endotoxin Recognition Using a Dipicolylamine-Modified Fluorescent Probe with Picomolar-Order Sensitivity

Endotoxin is a lipopolysaccharide (LPS) that is found in the outer membrane of the cell wall of Gram-negative bacteria. Due to its high toxicity, the allowable endotoxin limit for water for injection is set at a very low value. Conventional methods for endotoxin detection are time-consuming and expensive and have low reproducibility. A previous study has shown that dipicolylamine (dpa)-modified pyrene-based probes exhibit fluorescence enhancement in response to LPS; however, the application of such probes to the sensing of LPS is not discussed. Against this backdrop, we have developed a simple and rapid endotoxin detection method using a dpa-modified pyrenyl probe having a zinc(II) center (Zn-dpa-C4Py). When LPS was added into Zn-dpa-C4Py solution, excimer emission of the pyrene moiety emerged at 470 nm. This probe can detect picomolar concentrations of LPS (limit of detection = 41 pM). The high sensitivity of the probe is ascribed to the electrostatic and hydrophobic interactions between the probe and LPS, which result in the dimer formation of the pyrene moieties. We also found that Zn-dpa-C4Py has the highest selectivity for LPS compared with other phosphate derivatives, which is probably caused by the co-aggregation of the probe with LPS. We propose that Zn-dpa-C4Py is a promising chemical sensor for the detection of endotoxin in medical and pharmaceutical applications.

Adsorption and dehydration of ethanol on isomorphously B, Al, and Ga substituted H-ZSM-5 zeolite: an embedded ONIOM study

Dehydration reactions are important in the petroleum and petrochemical industries, especially for the feedstock production. In this work, the catalytic activity of zeolites with different acidities for the dehydration of ethanol to ethylene and diethylether is investigated by density functional calculations on cluster models of three isomorphous B, Al, and Ga substituted H-ZSM-5 zeolites. Both unimolecular and bimolecular mechanisms are investigated. Detailed reaction profiles for the dehydration reaction, assuming either a stepwise or a concerted mechanism, were calculated by using the ONIOM(MP2:M06-2X) + SCREEP method. The adsorption energies of ethanol are -21.6, -28.1, and -27.7 kcal mol^-1 on H-[B]-ZSM-5, H-[Al]-ZSM-5, and H-[Ga]-ZSM-5 zeolites, respectively. The activation energies for the rate-determining step of the unimolecular concerted mechanism for the ethylene formation are 48.5, 42.6, and 43.6 kcal mol^-1 on H-[B]-ZSM-5, H-[Al]-ZSM-5, and H-[Ga]-ZSM-5 zeolites, respectively. The activation energies for the ethoxy formation as the rate-determining step for the bimolecular formation of diethylether are 42.3, 40.0, and 41.1 kcal mol^-1 on H-[B]-ZSM-5, H-[Al]-ZSM-5, and H-[Ga]-ZSM-5 zeolites, respectively. The results indicate that the catalytic activities for the dehydration of ethanol decrease in the order H-[Al]-ZSM-5 ~ H-[Ga]-ZSM-5 > H-[B]-ZSM-5. Besides the acid strength, the zeolite framework affects the reaction by stabilizing the reaction intermediates, leading to more stable adsorption complexes and lower activation barriers.

A Novel Turn on Fluorescence Sensor for Determination Enoxaparin, a Low Molecular Weight Heparin

A sensor system was designed for the detection of Enoxaparin (Enox), a low molecular weight heparin (LMWH) that was run over the fluorescence quenching mechanism of fluorescein (FL) dye. At nanomolar concentrations, FL probe was subjected to fluorescence quenching by Fe(III). Fluorescence quenching mechanism of FL by Fe(III) was examined using various analytical techniques such as UV-vis absorption, fluorescence, and Fourier transform Infrared spectroscopy techniques, as well as with scanning electron microscope. The results indicated that photoinduced electron transfer process occurred between FL and Fe and that FL was quenched both statically and dynamically. Thermodynamic parameters showed that the interactions between them were predominantly hydrophobic interactions. Enox caused FL to recover its lost fluorescence properties and an increase was observed in the intensity of the fluorescence. Enox was detected successfully with the turn on fluorescence sensor. The developed Enox biosensor exhibited linearity in the range of 0-1.1 μg/ml. For Enox detection, the limit of detection was measured as 255 ng/mL. Enox biosensor was presented as a practical, simple, and applicable sensor system with high sensitivity and good selectivity. Enox is a medication usually monitored indirectly over anticoagulation. This study was presented as an alternative method for monitoring Enox directly. HIGHLIGHTS: Fluorescence quenching of Fluorescein dye by Fe(III) was studied in detail. The presence of enoxaparin enhanced the fluorescence properties of the fluorescein dye. A sensitive, simple and effective sensor system for determination of Enoxaparin, a low molecular weight heparin was shaped in the aqueous media. It was presented as a new method for Enoxaparin to be followed directly.

Ab initio study on the excited states of pyrene and its derivatives using multi-reference perturbation theory methods

The excited states of phenyl-substituted pyrene derivatives were calculated using multi-reference perturbation theory methods.