Selective oxidation of methane to C2+ products over Au-CeO2 by photon-phonon co-driven catalysis

Direct methane conversion to high-value chemicals under mild conditions is attractive yet challenging due to the inertness of methane and the high reactivity of valuable products. This work presents an efficient and selective strategy to achieve direct methane conversion through the oxidative coupling of methane over a visible-responsive Au-loaded CeO2 by photon-phonon co-driven catalysis. A record-high ethane yield of 755 μmol h-1 (15,100 μmol g-1 h-1) and selectivity of 93% are achieved under optimised reaction conditions, corresponding to an apparent quantum efficiency of 12% at 365 nm. Moreover, the high activity of the photocatalyst can be maintained for at least 120 h without noticeable decay. The pre-treatment of the catalyst at relatively high temperatures introduces oxygen vacancies, which improves oxygen adsorption and activation. Furthermore, Au, serving as a hole acceptor, facilitates charge separation, inhibits overoxidation and promotes the C-C coupling reaction. All these enhance photon efficiency and product yield.

Development of spray pyrolysis-synthesised Bi2O3 thin films for photocatalytic applications

Photocatalysis is a green and cost-effective approach to environmental remediation. While TiO2 is considered one of the benchmark photocatalysts, alternative materials such as Bi2O3 have recently attracted increasing scientific attention as prospective visible light photocatalysts. This study aimed to develop a strategy for Bi2O3 thin film deposition via ultrasonic spray pyrolysis and systematically study process variables for the deposition of β-Bi2O3 thin films for photocatalytic applications. To achieve the aim, the precursor solution concentration as well as deposition and annealing temperature were optimised. The structural, optical, morphological, chemical and wettability properties of the obtained Bi2O3 thin films were investigated with respect to the effect on the photocatalytic oxidation of 10 ppm methyl orange (MO). The highest photocatalytic activity (48% in 5 h) under UV-A was recorded for the β-Bi2O3 film deposited using 0.1 M precursor solution at 300 °C and heat-treated for 1 h in air at 350 °C. Deposition at 300 °C resulted in an amorphous film structure, whereas annealing at 350 °C led to the formation of the β-Bi2O3 phase with the dominant facet orientation (220). These results show the suitability of spray pyrolysis for the deposition of Bi2O3 thin films with promising results for MO dye degradation, expanding the range of suitable photocatalytic materials.

Nanostructured CeO2 photocatalysts: optimizing surface chemistry, morphology, and visible-light absorption

Emerging photocatalytic applications of cerium dioxide (CeO2) include green hydrogen production, CO2 conversion to fuels, and environmental remediation of various toxic molecules. These applications leverage the oxygen storage capacity and tunable surface chemistry of CeO2 to photocatalyze the chosen reaction, but many open questions remain regarding the fundamental physics of photocatalysis over CeO2. The commonly ascribed 'bandgap' of CeO2 (∼3.1 eV) differs fundamentally from other photocatalytic oxides such as TiO2; UV light excites an electron from the CeO2 valence band into a 4f state, generating a polaron as the lattice distorts around the localized charge. Researchers often disregard the distinction between the 4f state and a traditional, delocalized conduction band, resulting in ambiguity regarding mechanisms of charge transfer and visible-light absorption. This review summarizes modern literature regarding CeO2 photocatalysis and discusses commonly reported photocatalytic reactions and visible light-sensitization strategies. We detail the often misunderstood fundamental physics of CeO2 photocatalysis and supplement previous work with original computational insights. The exceptional progress and remaining challenges of CeO2-based photocatalysts are highlighted, along with suggestions for further research directions based on the observed gaps in current understanding.

Nanoscale Assembly of CdS/BiVO4 Hybrids for Coupling Selective Fine Chemical Synthesis and Hydrogen Production under Visible Light

Simultaneously utilizing photogenerated electrons and holes in one photocatalytic system to synthesize value-added chemicals and clean hydrogen (H₂) energy meets the development requirements of green chemistry. Herein, we report a binary material of CdS/BiVO₄ combining one-dimensional (1D) CdS nanorods (NRs) with two-dimensional (2D) BiVO₄ nanosheets (NSs) constructed through a facile electrostatic self-assembly procedure for the selectively photocatalytic oxidation of aromatic alcohols integrated with H₂ production, which exhibits significantly enhanced photocatalytic performance. Within 2 h, the conversion of aromatic alcohols over CdS/BiVO₄-25 was approximately 9-fold and 40-fold higher than that over pure CdS and BiVO₄, respectively. The remarkably improved photoactivity of CdS/BiVO₄ hybrids is mainly ascribed to the Z-scheme charge separation mechanism in the 1D/2D heterostructure derived from the interface contact between CdS and BiVO₄, which not only facilitates the separation and transfer of charge carriers, but also maintains the strong reducibility of photogenerated electrons and strong oxidizability of photogenerated holes. It is anticipated that this work will further stimulate interest in the rational design of 1D/2D Z-scheme heterostructure photocatalysts for the selective fine chemical synthesis integrated with H₂ evolution.

Heterostructure of vanadium pentoxide and mesoporous SBA-15 derived from natural halloysite for highly efficient photocatalytic oxidative desulphurisation

Integration between conventional semiconductors and porous materials can enhance electron–hole separation, improving photocatalytic activity. Here, we introduce a heterostructure that was successfully constructed between vanadium pentoxide (V₂O₅) and mesoporous SBA-15 using inexpensive halloysite clay as the silica–aluminium source. The composite material with 40% doped V₂O₅ shows excellent catalytic performance in the oxidative desulphurisation of dibenzothiophene (conversion of 99% with only a minor change after four-cycle tests). These results suggest the development of new catalysts made from widely available natural minerals that show high stability and can operate in natural light to produce fuel oils with ultra-low sulphur content.

New and robust catalysts made from natural minerals that can operate in sunlight to produce fuel oils with ultra-low-sulphur content.

Enhanced adsorption and degradation of methylene blue over mixed niobium-cerium oxide - Unraveling the synergy between Nb and Ce in advanced oxidation processes

Formation of reactive oxygen species (ROS) via H₂O₂ activation is of vital importance in catalytic environmental chemistry, especially in degradation of organic pollutants. A new mixed niobium-cerium oxide (NbCeO_x) was tailored for this purpose. A thorough structural and chemical characterization of NbCeO_x along with CeO₂ and Nb₂O₅ reference materials was carried out using TEM/STEM/EDS, SEM, XRD, XPS, EPR, UV-vis and N₂ physisorption. The ability of the catalysts to activate H₂O₂ towards ROS formation was assessed on the basis of EPR and Raman measurements. Catalytic activity of the oxides was evaluated in degradation of methylene blue (MB) as a model pollutant. Very high activity of NbCeO_x was attributed to the mixed redox-acidic nature of its surface, which originated from the synergy between Nb and Ce species. These two properties (redox activity and acidity) ensured convenient conditions for efficient activation of H₂O₂ and degradation of MB. The activity of NbCeO_x in MB degradation was found 3 times higher than that of the commercial Nb₂O₅ CBMM catalyst and 240 times higher than that of CeO₂. The mechanism of the degradation reaction was found to be an adsorption-triggered process initiated by hydroxyl radicals, generated on the surface via the transformation of O₂^-•/O₂^2-.

Unraveling the Origin of Photocatalytic Deactivation in CeO2/Nb2O5 Heterostructure Systems during Methanol Oxidation: Insight into the Role of Cerium Species

The study provides deep insight into the origin of photocatalytic deactivation of Nb₂O₅ after modification with ceria. Of particular interest was to fully understand the role of ceria species in diminishing the photocatalytic performance of CeO₂/Nb₂O₅ heterostructures. For this purpose, ceria was loaded on niobia surfaces by wet impregnation. The as-prepared materials were characterized by powder X-ray diffraction, nitrogen physisorption, UV-visible spectroscopy, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and photoluminescence measurements. Photocatalytic activity of parent metal oxides (i.e., Nb₂O₅ and CeO₂) and as-prepared CeO₂/Nb₂O₅ heterostructures with different ceria loadings were tested in methanol photooxidation, a model gas-phase reaction. Deep insight into the photocatalytic process provided by operando-IR techniques combined with results of photoluminescence studies revealed that deactivation of CeO₂/Nb₂O₅ heterostructures resulted from increased recombination of photo-excited electrons and holes. The main factor contributing to more efficient recombination of the charge carriers in the heterostructures was the ultrafine size of the ceria species. The presence of such highly dispersed ceria species on the niobia surface provided a strong interface between these two semiconductors, enabling efficient charge transfer from Nb₂O₅ to CeO₂. However, the ceria species supported on niobia exhibited a high defect site concentration, which acted as highly active recombination centers for the photo-induced charge carriers.