Detection of neonicotinoids in agricultural products using magnetic molecularly imprinted polymers-surface enhanced Raman spectroscopy

In this paper, magnetic molecularly imprinted polymers-surface-enhanced Raman spectroscopy (MMIPs-SERS) for rapidly analyzing acetamiprid and thiacloprid in agricultural products has been firstly developed. The magnetic imprinted polymers were obtained by polymerizing the imprinted layers on the surface of magnetic nanoparticles. The polymers were detailed characterized by using series of analytical techniques, and their adsorption and recognition performance were validated by adsorption tests. The results showed that the magnetic molecularly imprinted polymers possessed typically core-shell structure and exhibited class-specific recognition, fast adsorption saturation (only 1 min), and good magnetic separation performance towards targets. The adsorption and desorption conditions for MMIPs-SERS detection system were carefully investigated. Under optimum conditions, the good linear detection range of 1∼20 μg/g with LODs of 23.7-68.8 ng/g for acetamiprid and thiacloprid in peach and pear samples was obtained. Through the reusable and spiked experiments, the developed MMIPs-SERS method based on Au NPs as enhanced substrate was validated to be highly sensitive, accurate, efficient and applicable in analyzing neonicotinoids from pear and peach samples. This study provided a rapid and simple detection method for neonicotinoids with effective separation and detection properties based on the synergistic effect of imprinted polymers and SERS. More importantly, this developed method have good application potential in rapid analyzing field for neonicotinoids due to the amazing rapid adsorption time for extracting targets from complex food matrix (only 1 min).

Gold nanoparticle-based immunochromatographic assay for rapid detection of imazalil

Imazalil (IMZ) is a commonly used fungicide for controlling fungus in agriculture, leaving residual IMZ in crops that could be hazardous to human health. In this work, we designed IMZ haptens for mice immunization and prepared sensitive monoclonal antibody (mAb) against IMZ. The subtype of anti-IMZ mAb is IgG2a. It possessed a half inhibition concentration (IC50) of 0.95 ng mL-1 and showed no cross-reactivity against other chemicals in ic-ELISA. Taking advantage of the mAb, we developed a gold nanoparticle-based immunochromatographic assay (GICA) for the rapid detection of IMZ in grapes and tomatoes. The assay gave a visual limit of detection (vLOD) of 25 ng g-1 and cut-off value of 500 ng g-1 in both samples. According to the calibration curves, the calculated LOD were 4.12 ng g-1 and 4.70 ng g-1 in grapes and tomatoes, respectively. The recovery rates of IMZ ranged from 84.7% to 104.4% with variation coefficients (CVs) of 5.7-11.8% in spiked samples, indicating a potent practicability of the GICA. The whole GICA process took 30 min. Therefore, the developed assay can be used for on-site detection and quantitation of IMZ in grape and tomato samples.

Detection of pesticide residues on flexible and transparent fluorinated polyimide film based on surface-enhanced Raman spectroscopy technology

BACKGROUND

Excessive pesticide residues will seriously endanger human health. The complexity and lag of the current popular analytical methods hinder the timeliness of food safety analysis. Surface-enhanced Raman scattering (SERS) was an ultra-sensitive vibration spectroscopy technology with the advantages of less time cost, non-destructive and semi-quantitative detection, which has attracted much attention in the rapid field detection of pesticide residue. It was clear that we need an efficient and convenient substrate for pesticide residue detection based on SRES technology, which needs to be portable, flexible, transparent and easy to detect irregular object surfaces.

RESULTS

A novel SERS sensor was designed to detect single and multi-component pesticide residues on irregular fruit and vegetable surfaces by in-situ growth of silver nanoparticles on a flexible and transparent fluorinated polyimide (FPI) substrate. Among them, Ag NPs were synthesized by liquid phase reduction method (AgNO3-PVP and NaBH4). The results showed that the detection limit of 1-4 BDT was down to 10-10 mol L-1, the enhancement factor (EF) was up to 1.57 × 107, and relative standard deviation (RSD) was 7.49 %. By this method, tricyclazole solution at a concentration of 0.01 mg L-1 was still detectable by the FPI@Ag SERS substrate. The linear quantification was achieved in the range from 100 mg L-1 to 0.01 mg L-1. Two mixed pesticides, tricyclazole and imazalil, were also successfully distinguished.

SIGNIFICANCE

This represents the formation of a flexible, foldable and transparent substrate for rapid on-site detection. Results can be obtained in <5 min by attaching the substrate to the substance to be tested. And the SERS substrate prepared with high sensitivity, stability, portable and convenient analysis, which provided new ideas for efficient and rapid household food safety detection.

Nondestructive testing methods for pesticide residue in food commodities: A review

Pesticides play an important role in increasing the overall yield and productivity of agricultural foods by controlling pests, insects, and numerous plant-related diseases. However, the overuse of pesticides has resulted in pesticide contamination of food products and water bodies, as well as disruption of ecological and environmental systems. Global health authorities have set limits for pesticide residues in individual food products to ensure the availability of safe foods in the supply system and to assist farmers in developing the best agronomic practices for crop production. Therefore, the use of nondestructive testing (NDT) methods for pesticide residue detection is gaining interest in the food supply chain. The NDT techniques have several advantages, such as simultaneous measurement of chemical and physical characteristics of food without destroying the product. Although numerous studies have been conducted on NDT for pesticide residue in agro-food products, there are still challenges in real-time implementation. Further study on NDT methods is needed to establish their potential for supplementing existing methods, identifying mixed pesticides, and performing volumetric quantification (not surface accumulation alone).

Transparent and flexible AuNSs/PDMS-based SERS substrates for in-situ detection of pesticide residues

Herein, we developed a PDMS-based flexible SERS substrate modified with gold nanostars (AuNSs) for in-situ detection of pesticide residues on fruit surfaces. AuNSs with sharp branches were assembled on aminated PDMS membrane by chemical bonding effect. The AuNSs/PDMS substrate showed good signal uniformity, stability and sensitivity using the Raman signal molecule 4-MBA and the detection concentration of 4-MBA was as low as 10^-8 mol/L. Then the AuNSs/PDMS substrate was used to detect methyl parathion (MP) standard solution. A good linear relationship between SERS intensity at 1342 cm^-1 and MP concentration was established in the range of 4 μg/mL-100 μg/mL, and the limit of detection was down to 1.946 μg/mL. Moreover, the AuNSs/PDMS substrate was directly covered on the surface of MP contaminated apple, and the Raman laser was incident from the back of substrate to achieve in-situ detection of pesticide residues. The recovery ratio indicated that the fabricated SERS substrate was realized successfully in real sample detection. AuNSs/PDMS substrate eliminates the requirement for sample pre-processing steps before testing, which can be used as a method for rapid inspection of pesticide in agricultural products on site.

Rapid field trace detection of pesticide residue in food based on surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectroscopy is an alternative detection tool for monitoring food security. However, there is still a lack of a conclusion of SERS detection with respect to pesticides and real sample analysis, and the summary of intelligent algorithms in SERS is also a blank. In this review, a comprehensive report of pesticides detection using SERS technology is given. The SERS detection characteristics of different types of pesticides and the influence of substrate on inspection are discussed and compared by the typical ways of classification. The key points, including the progress in real sample analysis and Raman data processing methods with intelligent algorithm, are highlighted. Lastly, major challenges and future research trends of SERS analysis of pesticide residue are also addressed. SERS has been proven to be a powerful technique for rapid test of residue pesticides in complex food matrices, but there still is a tremendous development space for future research.

Quantitative SERS sensor based on self-assembled Au@Ag heterogeneous nanocuboids monolayer with high enhancement factor for practical quantitative detection

Accurate and rapid quantitative detection of pesticide and pollutant levels in the actual sample can aid in protecting food security, environmental security, and human health. A high Raman enhancement factor and good repeatability of the surface-enhanced Raman spectroscopy (SERS) substrates are favorable to quantitative analysis. Herein, a quantitative SERS sensor based on constructed self-assembled plasmonic Au@Ag heterogeneous nanocuboids (Au@Ag NCs) monolayer was developed. The sensor was used to quantitatively detect the trace pesticides extracted from pear surfaces and pollutants in fishpond water. Densely packed Au@Ag NCs fabricated into large-scale monolayer films were chemically functionalized using 4-methyl-thiobenzoic acid (4-MBA) at the organic/aqueous interface, in which plentiful nanogaps contribute to increase hotspots. Their sharp corners and edges make the sensor have high SERS performance through providing abundant "hot spots." The obtained optically SERS-based sensor with uniform liquid-state interfacial nanoparticle arrays appeared to have nice SERS performance and uniformity using crystal violet (CV) as a probe molecule. In particular, the proposed SERS sensor was applied for quantitative detection of thiabendazole (TBZ) extracted from pear surfaces and malachite green (MG) in fishpond water down to levels of 0.0105 nM and 0.87 nM for SERS assay respectively. As a result, our proposed SERS quantitative detection strategy is quite preferred to on-site analysis and supervision of contaminant in food samples.

Onsite/on-field analysis of pesticide and veterinary drug residues by a state-of-art technology: A review

Pesticides and veterinary drugs are generally employed to control pests and insects in crop and livestock farming. However, remaining residues are considered potentially hazardous to human health and the environment. Therefore, regular monitoring is required for assessing and legislation of pesticides and veterinary drugs. Various approaches to determining residues in various agricultural and animal food products have been reported. Most analytical methods involve sample extraction, purification (cleanup), and detection. Traditional sample preparation is time-consuming labor-intensive, expensive, and requires a large amount of toxic organic solvent, along with high probability for the decomposition of a compound before the analysis. Thus, modern sample preparation techniques, such as the quick, easy, cheap, effective, rugged, and safe method, have been widely accepted in the scientific community for its versatile application; however, it still requires a laboratory setup for the extraction and purification processes, which also involves the utilization of a toxic solvent. Therefore, it is crucial to elucidate recent technologies that are simple, portable, green, quick, and cost-effective for onsite and infield residue detections. Several technologies, such as surface-enhanced Raman spectroscopy, quantum dots, biosensing, and miniaturized gas chromatography, are now available. Further, several onsite techniques, such as ion mobility-mass spectrometry, are now being upgraded; some of them, although unable to analyze field sample directly, can analyze a large number of compounds within very short time (such as time-of-flight and Orbitrap mass spectrometry). Thus, to stay updated with scientific advances and analyze organic contaminants effectively and safely, it is necessary to study all of the state-of-art technology.

Pesticide degradation on solid surfaces: a moisture dependent process governed by the interaction between TiO2 and H2O

The solid-phase photocatalytic degradation is a humidity control process through the interaction between H₂O and TiO₂.

A SERS aptasensor based on AuNPs functionalized PDMS film for selective and sensitive detection of Staphylococcus aureus

In this study, a sensitive biosensor was developed based on aptamer functionalized polydimethylsiloxane (PDMS) film for the detection of Staphylococcus aureus (S. aureus) using surface-enhanced Raman scattering (SERS) technology. Initially, the surface of PDMS film was chemically modified by piranha solution and 3-Aminopropyltriethoxysilane (APTES), and then AuNPs-PDMS film was prepared by coating gold nanoparticles (AuNPs) through electrostatic interaction. Next, the aptamers were immobilized on the AuNPs-PDMS membrane via gold-sulfur bond to form the capture substrate. Meanwhile, gold-silver core-shell nanoflowers (Au@Ag NFs) modified with mercaptobenzoic acid (4-MBA) and aptamers were applied as a signal probe. In the presence of the target, the signal molecular probe and the capturing substrate specifically combined with the target and resulted in a sandwich structure "capture substrate-target-signal molecular probe". Under the optimized experimental condition, the signal of 4-MBA at 1085 cm^-1 was linearly related to the S. aureus concentration in the range of 4.3 × 10 cfu mL^-1-4.3 × 10⁷ cfu mL^-1 (y = 326.91x-117.62, R² = 0.9932) with a detection limit of 13 cfu mL^-1. The method was successfully applied to spiked actual samples and a 92.5-110% recovery rate was achieved.

Metal Nanoparticles-Enhanced Biosensors: Synthesis, Design and Applications in Fluorescence Enhancement and Surface-enhanced Raman Scattering

Metal nanoparticles (NP) that exhibit localized surface plasmon resonance play an important role in metal-enhanced fluorescence (MEF) and surface-enhanced Raman scattering (SERS). Among the optical biosensors, MEF and SERS stand out to be the most sensitive techniques to detect a wide range of analytes from ions, biomolecules to macromolecules and microorganisms. Particularly, anisotropic metal NPs with strongly enhanced electric field at their sharp corners/edges under a wide range of excitation wavelengths are highly suitable for developing the ultrasensitive plasmon-enhanced biosensors. In this review, we first highlight the reliable methods for the synthesis of anisotropic gold NPs and silver NPs in high yield, as well as their alloys and composites with good control of size and shape. It is followed by the discussion of different sensing mechanisms and recent advances in the MEF and SERS biosensor designs. This includes the review of surface functionalization, bioconjugation and (directed/self) assembly methods as well as the selection/screening of specific biorecognition elements such as aptamers or antibodies for the highly selective bio-detection. The right combinations of metal nanoparticles, biorecognition element and assay design will lead to the successful development of MEF and SERS biosensors targeting different analytes both in-vitro and in-vivo. Finally, the prospects and challenges of metal-enhanced biosensors for future nanomedicine in achieving ultrasensitive and fast medical diagnostics, high-throughput drug discovery as well as effective and reliable theranostic treatment are discussed.

SERS spectroscopy using Au-Ag nanoshuttles and hydrophobic paper-based Au nanoflower substrate for simultaneous detection of dual cervical cancer-associated serum biomarkers

Ultrasensitive detection of specific biomarkers in clinical serum is helpful for early diagnosis of cervical cancer. In this paper, a surface-enhanced Raman scattering (SERS)-based immunoassay was developed for the simultaneous determination of squamous cell carcinoma antigen (SCCA) and osteopontin (OPN) in cervical cancer serum. Au-Ag nanoshuttles (Au-AgNSs) as SERS tags and hydrophobic filter paper-based Au nanoflowers (AuNFs) as capture substrate were constructed into a sandwich structure which served as an ultrasensitive SERS-based immunoassay platform. Finite difference time domain simulation confirmed that the electromagnetic field coupled between the AuNFs had a prominent SERS signal enhancement effect, which improved the detection sensitivity. SERS mapping showed that hexadecenyl succinic anhydride hydrophobic treatment could prevent the analyte from being quickly absorbed by the filter paper and increase the retention time to be more evenly distributed on the filter paper substrate. The immunoassay platform was verified to have good selectivity and reproducibility. With this method, the detection limits of SCCA and OPN in human serum were as low as 8.628 pg/mL and 4.388 pg/mL, respectively. Finally, in order to verify the feasibility of its clinical application, the serum samples of healthy subjects; cervical intraepithelial neoplasia I (CINI), CINII, and CINIII; and cervical cancer patients were analyzed, and the reliability of the results was confirmed by enzyme-linked immunosorbent assay experiments. The constructed SERS-based immunoassay platform could be used as a clinical tool for early screening of cancers in the future.

Fabrication of sensitive silver-decorated cotton swabs for SERS quantitative detection of mixed pesticide residues in bitter gourds

This study developed a simple, efficient and environmentally friendly fabrication method for surface-enhanced Raman spectroscopy (SERS) wipers for the rapid detection of individual and mixed pesticide residues in actual samples.