Discerning toxic nerve gas agents via a distinguishable 'turn-on' fluorescence response: multi-stimuli responsive quinoline derivatives in action

We have successfully synthesized quinoline derivatives that exhibit easy scalability and responsiveness to multiple stimuli. These derivatives are capable of forming self-assembled nanoscopic aggregates in an aqueous medium. Consequently, when placed in an aqueous environment, we observe dual fluorescence originating from both twisted intramolecular charge transfer and aggregation-induced emission. The introduction of nerve gas agents, such as diethyl chlorophosphate (DClP) or diethylcyanophosphate (DCNP), to the probe molecules facilitates the charge-transfer process, resulting in a red-shift in absorption maxima. Notably, when operating in fluorescence mode, both of these analytes produce distinct output signals, making them easily distinguishable. DCNP generates a blue fluorescence, while the addition of DClP yields cyan fluorescence. Our mechanistic investigation reveals that the initial step involves phosphorylation of the quinoline nitrogen end. However, in the case of DCNP, the released cyanide ion subsequently attacks the carbonyl carbon centre, forming a cyanohydrin derivative. The response to these target analytes appears to be influenced by the nucleophilicity of the quinoline nitrogen end and the electrophilic nature of the carbonyl unit.

A chemodosimetric chemosensor for the ratiometric detection of nerve agent-mimic DCP in solution and vapor phases

Nerve agents are among the most deadly and lethal chemical warfare agents (CWAs). Rapid identification is crucial for specialized individuals to take action against dangerous drugs. This paper describes the synthesis and characterisation of a probe (MNFZ) based on the methoxy naphthalene-furoic hydrazide group. The probe rapidly (100 s) detects and quantifies the nerve-agent simulant diethyl chlorophosphate (DCP) in both solution and vapor phases. This sensor uses a new recognition center, furoic hydrazide, where the nitrogen atom of the imine group (CN) attacks the electrophilic core phosphorus atom of DCP, followed by the hydrolysis of the imine group in the acetonitrile (ACN) solution to produce the corresponding aldehyde MNPA. The development of ICT character resulted in a distinct red-shifted ratiometric fluorescence response to DCP, with a very low limit of detection (12.2 nM). The probe is an efficient chemosensor due to its high selectivity over other organophosphorus compounds as well as its chemical stability across a wide pH range. DFT calculations, 1H NMR and HRMS were performed to finalize the sensing mechanism. Lastly, the as-designed sensor was successfully used to build a highly sensitive portable kit in test strips and a cotton biopolymer for simple and safe real-time monitoring of DCP.

A benzoxazole-triphenylamine conjugated fluorogenic probe for specific detection of sarin gas mimic diethylchlorophosphate

In this study, an excellent chromo-fluorogenic PMPA probe, (E)-4-(((4-(benzoxazole-2-yl)phenyl)imino)methyl)-N,N-diphenylamine, is introduced for the detection of sarin gas mimic diethyl chlorophosphate (DCP) in solution and gaseous phases. On adding DCP into PMPA solution in a pure DMSO and water-DMSO (4 : 1) medium, it exhibits a hypsochromic shift from yellow to colorless and from no fluorescence to highly intense blue-violet photoluminescence via the formation of a phosphorylated PMPA-DCP product due to the inhibition of intramolecular charge transfer (ICT) and photoinduced electron transfer (PET) mechanism. The sensor could detect DCP in the presence of several other notorious guest analytes with a detection limit in the μM range. Moreover, to accomplish the on-spot detection of DCP and explore the practical applicability of the probe, a paper strip-based test kit, "dip-stick" method, and, more interestingly, a real sample analysis was demonstrated in spiked soil samples.

Hf-Based MOF for Rapid and Selective Sensing of a Nerve Agent Simulant and an Aminophenol: Insights from Experiments and Theory

The metal-organic framework (MOF) Hf-DUT-52 was prepared with diamino functionality by the solvothermal method. This material displayed fluorometric sensing ability toward a nerve agent simulant (diethyl chlorophosphate (DCP)) and 3-diethylaminophenol (3-DEAP). It is the first-ever reported fluorescent MOF sensor for DCP and 3-DEAP. Apart from a fast response (<5 s), the sensor had a very low detection limit for both DCP and DEAP (limit of detection (LOD) values for DCP and 3-DEAP sensing were 9 and 125 nM, respectively). The obtained detection limit is the second lowest among all of the reported optical sensors for DCP. The sensor also displayed its capability to identify the presence of trace amount of DCP in various natural water specimens with good selectivity. Moreover, MOF@cotton composites were developed for visual, on-site, nanomolar-level detection of both targeted analytes. Furthermore, a MOF@PVA thin film was fabricated and successfully utilized for the detection of highly volatile and deadly poisonous DCP in the vapor phase. The sensor was also recyclable for up to five cycles without losing appreciable efficiency. Density functional theory (DFT)-based periodic and cluster calculations were performed to shed light on the sensing ability of the MOF by studying the interactions of DCP and DEAP with the MOF. Our theoretical results reveal the importance of linker defects and water chemisorption on the adsorption/complexation of the analytes at uncoordinated Hf sites.

A Turn-On and Colorimetric Probe Based on Isophorone Skeleton for Detecting Nerve Agent Mimic Diethyl Chlorophosphite

A new turn-on probe (SWJT-20) based on isophorone fluorophore for the detection of nerve agent mimic diethyl chlorophosphite (DCP) was designed and synthesized. SWJT-20 could rapidly respond to DCP within 2 s using UV-Vis or fluorescent spectra, accompanied by a significant change in the solution color under visible light or UV light, which could be observed by the naked eyes. The detection limit of SWJT-20 to DCP was as low as 8.3 nM, which is lower than those of most reported fluorescent probes for DCP detection. Additionally, SWJT-20 could quantitatively measure DCP using ratio changes in A₄₂₇/A₆₄₅ in absorption spectra. Furthermore, facile paper as sensors with the visualization of colorimetric/fluorometric responses based on SWJT-20 has been fabricated. Notably, this probe could detect DCP vapor through gas diffusion experiments.

Dual-State Fluorescent Probe for Ultrafast and Sensitive Detection of Nerve Agent Simulants in Solution and Vapor

The development of fluorescent probes for detecting nerve agents has been the main concern focus of research because of their lethal toxicity for humans. Herein, a probe (PQSP) based on the quinoxalinone unit and the styrene pyridine group was synthesized and could visually detect a sarin simulant diethyl chlorophosphate (DCP) with excellent sensing properties in solution and solid states. Interestingly, PQSP showed an apparent intramolecular charge-transfer process by catalytic protonation after reacting with DCP in methanol, accompanied with the aggregation recombination effect. The sensing process was also verified by nuclear magnetic resonance spectra, scanning electron microscopy, and theoretical calculations. In addition, the papered test strips of loading probe PQSP exhibited an ultrafast response time within 3 s and high sensitivity with a limit of detection of 3 ppb for the detection of DCP vapor. Therefore, this research provides a designed strategy for developing the probes with dual-state emission fluorescence in solution and solid states for detecting DCP sensitively and rapidly, which can be fabricated as chemosensors to visually detect nerve agents in practice.

Fluorescent probes for the detection of chemical warfare agents

Chemical warfare agents (CWAs) are toxic chemicals that have been intentionally developed for targeted and deadly use on humans. Although intended for military targets, the use of CWAs more often than not results in mass civilian casualties. To prevent further atrocities from occurring during conflicts, a global ban was implemented through the chemical weapons convention, with the aim of eliminating the development, stockpiling, and use of CWAs. Unfortunately, because of their relatively low cost, ease of manufacture and effectiveness on mass populations, CWAs still exist in today's world. CWAs have been used in several recent terrorist-related incidents and conflicts (e.g., Syria). Therefore, they continue to remain serious threats to public health and safety and to global peace and stability. Analytical methods that can accurately detect CWAs are essential to global security measures and for forensic analysis. Small molecule fluorescent probes have emerged as attractive chemical tools for CWA detection, due to their simplicity, ease of use, excellent selectivity and high sensitivity, as well as their ability to be translated into handheld devices. This includes the ability to non-invasively image CWA distribution within living systems (in vitro and in vivo) to permit in-depth evaluation of their biological interactions and allow potential identification of therapeutic countermeasures. In this review, we provide an overview of the various reported fluorescent probes that have been designed for the detection of CWAs. The mechanism for CWA detection, change in optical output and application for each fluorescent probe are described in detail. The limitations and challenges of currently developed fluorescent probes are discussed providing insight into the future development of this research area. We hope the information provided in this review will give readers a clear understanding of how to design a fluorescent probe for the detection of a specific CWA. We anticipate that this will advance our security systems and provide new tools for environmental and toxicology monitoring.

Simple and efficient PET and AIEE mechanism-based fluorescent probes for sensing Tabun mimic DCNP

The highly sensitive, selective, easy-to-prepare, aqueous media based on two novel probes 2-(pyren-1-yl)imidazo[1,2-a]pyridine (IMP-Py) and (2-(pyren-1-yl)imidazo[1,2-a]pyridin-3-yl)methanol (IMP-Py-OH) are synthesized for the detection of toxic chemical warfare nerve agent mimic diethylcyanochlorophosphonate (DCNP). Both probes are found effective in the detection of DCNP but comparatively, IMP-Py shows better properties in terms of instantaneous response, specificity, selectivity and a low detection limit of 16.9 nM. A significant enhancement of fluorescence intensity of IMP-Py due to aggregation-induced emission enhancement (AIEE) and photoinduced electron transfer (PET) phenomenon was inhibited due to phosphorylation of the hydroxy group of IMP-Py-OH in presence of DCNP has been observed. Taking the advantages of good sensitivity and fast response, probe IMP-Py has been fabricated into a viable paper strips portable product, tested for its potential for the detection of DCNP in tap water as well as with its vapor and response is visible under a UV lamp of 365 nm wavelength.

Cellulose Acetate-Cellulose Nanowhisker Nanocomposite Immobilized with a DCDHF-Hydrazone Chromophore toward a Smart Test Strip for Colorimetric Detection of Diethyl Chlorophosphate as a Nerve Agent Mimic

Exposure to nerve agents, which are usually colorless and odorless gases, may cause organ failure, paralysis, or even quick death. Diethyl chlorophosphate (DCP) has been recognized as one of the most well-known chemical warfare nerve agent mimics. In the current study, we introduce a simple strategy for the development of a portable and reversible nanocomposite-based microporous strip for naked-eye detection of DCP within a few seconds. A dicyanomethylenedihydrofuran hydrazone (DCDHF-H) chromophore was synthesized by an easy azo-coupling reaction and encapsulated in situ during the preparation of cellulose acetate/cellulose nanowhisker/hydrazone (CA-CNW-H) nanocomposites. These CA-CNW-H nanocomposites displayed a bathochromic shift in the absorption intensity of about 142 nm from 438 to 580 nm with the increase of the DCP concentration. The present CA-CNW-H sensor strip displayed a detection limit for DCP ranging from 25 to 200 ppm. The color change of CA-CNW-H from yellow to purple due to exposure to DCP was detected by CIE Lab analysis. The morphology, fibrous crystallinity, thermal stability, and mechanical properties of the prepared CA-CNW-H sensor strips were investigated.

A Double-Site Chemodosimeter for Selective Fluorescence Detection of a Nerve Agent Mimic

A novel two-site chemodosimeter (SWJT-4) based on fluorescein skeleton to detect diethyl chlorophosphate (DCP) was designed and synthesized. It is a turn-on fluorescent probe for DCP with good selectivity and obvious color change in aqueous solution. Interestingly, the two oxime groups of SWJT-4 as dual response sites initiated different reactions with DCP to form a cyano group and an isoxazole ring, respectively. The corresponding mechanism was confirmed by 1H NMR, MS and DFT calculation. Moreover, SWJT-4 could be used as a fluorescent test paper to detect DCP vapor.

Rhodamine phenol-based fluorescent probe for the visual detection of GB and its simulant DCP

Rhodamine phenol-based fluorescent probes have been synthesized. The probe RBNP demonstrates a rapid response and extreme low limit detection to diethylchlorophosphate and can rapidly and visually detect a real nerve agent GB in vapor.

A naphthalimide-based fluorescent probe for the highly sensitive and selective detection of nerve agent mimic DCP in solution and vapor phase

The fluorescent probe for DCP displays excellent selectivity and sensitivity with a low detection limit of 5.5 nM in DMF.