Fabrication of high-performance triboelectric nanogenerator based on Ni3C nanosheets to self-power thermal patch for pain relief

In this work, we report a vertical contact-separation mode triboelectric nanogenerators (TENG) comprising of Ni3C/PDMS composite and Nylon Nanofibers for self-powering a nichrome wire-based thermal patch for muscular/joint relaxation. An optimised composition of Ni3C (25 wt%) and PDMS as a tribo-negative material and Nylon Nanofibers synthesised via electrospinning on copper electrode foil as a tribo-positive material were used to fabricate the TENG. The fabricated TENG exhibits outstanding output generating an average open circuit voltage of ∼252 V, an average short circuit current of ∼40.87μA and a peak power of ∼562.35μW cm-2at a matching resistance of 20 MΩ by manual tapping. Enhancement in contact area due to electrospun nylon and micro capacitive Ni3C flakes in dielectric PDMS contribute to the exceptional performance of the TENG. The optimised TENG is then connected to a full bridge rectifier with a 100 nF filtering capacitor to convert the AC voltage to a DC output with a peak voltage of ∼5.4 V and a ripple voltage of ∼1.04 V to recharge an ICR 18650 Li-ion battery, which functions as a medium to improve electrical energy flow to the heat patch. The electrical energy is converted into heat energy by a wounded nichrome wire placed inside the heat patch. The nichrome wire of length 3 cm with appropriate number of windings was employed in the heat patch. An increment of 45 °F can be observed by switching the charged Li-ion battery-based circuit ON for just 30 s. The strategy of self-powering a heat patch using this TENG finds enormous applications in physiotherapy and sports to relieve muscle and joint pains.

Tin oxide-polyaniline nanocomposite modified nickel foam for highly selective and sensitive detection of cholesterol in simulated blood serum samples

Cholesterol (CH) is a vital diagnostic marker for a variety of diseases, making its detection crucial in biological applications including clinical practice. In this work, we report the synthesis of tin oxide-polyaniline nanocomposite-modified nickel foam (SnO2-PANI/NF) for non-enzymatic detection of CH in simulated human blood serum. SnO2was synthesized via the hydrothermal method, followed by the synthesis of SnO2-PANI nanocomposite throughin situchemical polymerization of aniline using ammonium persulfate as the oxidizing agent. Morphological studies display agglomerated SnO2-PANI, which possess diameters ranging from an average particle size of ∼50 to ∼500 nm, and the XRD analysis revealed the tetragonal structure of the SnO2-PANI nanocomposite. Optimization studies demonstrating the effect of pH and weight percentage are performed to improve the electrocatalytic performance of the sensor. The non-enzymatic SnO2-PANI/NF sensor exhibits a linear range of 1-100μM with a sensitivity of 300μAμM-1/cm-2towards CH sensing and a low limit of detection of 0.25μM (=3 S m-1). SnO2-PANI/NF facilitates the electrooxidation of CH to form cholestenone by accepting electrons generated during the reaction and transferring them to the nickel foam electrode via Fe (III)/Fe (IV) conversion, resulting in an increased electrochemical current response. The SnO2-PANI/NF sensor demonstrated excellent selectivity against interfering species such as Na+, Cl-, K+, glucose, ascorbic acid, and SO42-. The sensor successfully determined the concentration of CH in simulated blood serum samples, demonstrating SnO2-PANI as a potential platform for a variety of electrochemical-based bioanalytical applications.

Green calcium-based photocatalyst derived from waste marble powder for environmental sustainability: A review on synthesis and application in photocatalysis

Calcium, with its excellent adsorptive property and higher permissible limits in the environment, emerges as an effective wastewater treatment earth metal. Most of the catalysts, photocatalysts, and adsorbents reported in the literature have heavy metal complex, which creates a leaching problem. Majorly, precursors used for the synthesis of heterogeneous catalysts for wastewater treatment are costly. Therefore, the use of such precursors would be not suitable and feasible approach from an economic point of view. This review work is focused on giving an overview of the utilisation of calcium-based catalysts (adsorbents and photocatalyst) for the removal/degradation of various types of dye water pollutants and summarises the reported effects of calcium as a base on the removal efficiency of dopants. In this article, an extensive literature survey is presented on the various photocatalysts developed and the different syntheses involved in their preparation. As the utilisation of marble powder is a green sustainable approach, the scope of various calcium-based photocatalysts and their application is presented. This article also aims for the elementary and inclusive determination of the effect of introducing calcium as a base for different catalysts and adsorbents.

Current Challenges and Developments in Perovskite-Based Electrochemical Biosensors for Effective Theragnostics of Neurological Disorders

Early-stage diagnosis of neurological disease and effective therapeutics play a significant role in improving the chances of saving lives through suitable and personalized courses of treatment. Biomolecules are potential indicators of any kind of disorder in a biological system, and they are recognized as a critical quantitative parameter in disease diagnosis and therapeutics, collectively known as theragnostics. The effective diagnosis of neurological disorders solely depends on the detection of the imbalance in the concentration of neurological biomarkers such as nucleic acids, proteins, and small metabolites in bodily fluids such as blood serum, plasma, urine, etc. This process of neurological biomarker detection can lead to an effective prognosis with a prediction of the treatment efficiency and recurrence. While review papers on electrochemical, spectral, and electronic biosensors for the detection of a wide variety of biomarkers related to neurological disorders are available in the literature, the prevailing challenges and developments in perovskite-based biosensors for effective theragnostics of neurological disorders have received scant attention. In this Mini-Review, we discuss the topical advancements in design strategies of perovskite-based electrochemical biosensors with detailed insight into the detection of neurological disease or disorder-specific biomarkers and their trace-level detection in biological fluids with high specificity and sensitivity. The tables in this Review give the performance analysis of recently developed perovskite-based electrochemical biosensors for effective theragnostics of neurological disorders. To conclude, the current challenges in biosensing technology for early diagnosis and therapeutics of neurological disorders are discussed along with a forecast of their anticipated developments.

A low-cost and facile electrochemical sensor for the trace-level recognition of flutamide in biofluids using large-area bimetallic NiCo2O4 micro flowers

Nickel–cobalt-based bimetallic oxide compound (NiCo2O4) as a highly sensitive and selective platform for the detection of flutamide in biological fluids.

Ultrasensitive electrochemical biosensors for dopamine and cholesterol: recent advances, challenges and strategies

The rapid and accurate determination of the dopamine (neurotransmitter) and cholesterol level in bio-fluids is significant because they are crucial bioanalytes for several lethal diseases, which require early diagnosis. The level of DA in the brain is modulated by the dopamine active transporter (DAT), and is influenced by cholesterol levels in the lipid membrane environment. Accordingly, electrochemical biosensors offer rapid and accurate detection and exhibit unique features such as low detection limits even with reduced volumes of analyte, affordability, simple handling, portability and versatility, making them appropriate to deal with augmented challenges in current clinical and point-of-care diagnostics for the determination of dopamine (DA) and cholesterol. This feature article focuses on the development of ultrasensitive electrochemical biosensors for the detection of cholesterol and DA for real-time and onsite applications that can detect targeted analytes with reduced volumes and sub-picomolar concentrations with quick response times. Furthermore, the development of ultrasensitive biosensors via cost-effective, simple fabrication procedures, displaying high sensitivity, selectivity, reliability and good stability is significant in the impending era of electrochemical biosensing. Herein, we emphasize on recent advanced nanomaterials used for the ultrasensitive detection of DA and cholesterol and discuss in depth their electrochemical activities towards ultrasensitive responses. Key points describing future perspectives and the challenges during detection with their probable solutions are discussed, and the current market is also surveyed. Further, a comprehensive review of the literature indicates that there is room for improvement in the miniaturization of cholesterol and dopamine biosensors for lab-on-chip devices and overcoming the current technical limitations to facilitate full utilization by patients at home.

Lead-Free Halide Cs2PtI6 Perovskite Favoring Pt-N Bonding for Trace NO Detection

In recent years, the performance research of perovskite materials is not only concentrated in the field of solar cells or optics, but the field of gas sensing has gradually entered the public view. However, the detection of nitric oxide (NO) by lead-free halide perovskites has not yet been reported. Herein, we use Cs₂PtI₆ to realize the first example of a halide perovskite applied to NO sensing. Due to favoring Pt-N binding, the material has some excellent properties such as a NO detection limit as low as 100 parts-per-billion (ppb), ultrahigh selectivity to NO, and can work at room temperature for more than 2 months. In situ sum frequency generation (SFG) spectra and crystal orbital Hamilton population (COHP) analysis reveal that the strong bonding interaction between Pt 5s and N 2s ensure the high adsorption energy, and Pt 5d electron back donation to N 2p_x, N 2p_z antibonding causes the conductive change of the sensors. In addition, its flexible wearable technology shows the application potential of the device and promotes the further development of perovskite materials.

Sensitive Electrochemical Detection of Bioactive Molecules (Hydrogen Peroxide, Glucose, Dopamine) with Perovskites-Based Sensors

Perovskite-modified electrodes have received increasing attention in the last decade, due to their electrocatalytic properties to undergo the sensitive and selective detection of bioactive molecules, such as hydrogen peroxide, glucose, and dopamine. In this review paper, different types of perovskites involved for their electrocatalytic properties are described, and the proposed mechanism of detection is presented. The analytical performances obtained for different electroactive molecules are listed and compared with those in terms of the type of perovskite used, its nanostructuration, and its association with other conductive nanomaterials. The analytical performance obtained with perovskites is shown to be better than those of Ni and Co oxide-based electrochemical sensors. Main trends and future challenges for enlarging and improving the use of perovskite-based electrochemical sensors are then discussed.

Silica embedded carbon nanosheets derived from biomass acorn cupule for non-enzymatic, label-free, and wide range detection of α 1-acid glycoprotein in biofluids

In this work, we demonstrate the first report on a low-cost, non-enzymatic, label-free electrochemical sensing of alpha-1-acid-glycoprotein (α₁GP) biomarker in biofluids using silica embedded carbon nanosheets (SEC) derived from acorn cupules biomass. The SEC/GCE sensor exhibits low detection limit (LOD) of 30 ng/mL (LOD = 3 s/m) which is far below the lowest physiological concentration of α₁GP and a wide linear detection range from 100 ng/mL to 10 mg/mL which covers entire clinical concentration range reported for various diseases like cancer, sepsis, etc. The sensing mechanism of the sensor relies on the direct electrooxidation of sialic acid from the α₁GP structure which hinder the interfacial electron-transfer process of [Fe (CN)₆]^3-/4- redox probe at the electrode-electrolyte interface. The sensor exhibits excellent selectivity and stability towards detection of α₁GP which is ascribed to the presence of embedded silica nanoparticles on the surface of the carbon nanosheets. The successful determination of α₁GP in the simulated blood serum sample with good recovery percentage (i.e., from ∼94.03% to ∼103.50%) proves the feasibility of the sensor towards clinical applications. The overall efficacy of the sensor proves it as a promising low-cost, sustainable, and non-enzymatic platform for a wide variety of bioanalytical applications.

Graphene and Perovskite-Based Nanocomposite for Both Electrochemical and Gas Sensor Applications: An Overview

Perovskite and graphene-based nanocomposites have attracted much attention and been proven as promising candidates for both gas (H₂S and NH₃) and electrochemical (H₂O₂, CH₃OH and glucose) sensor applications. In this review, the development of portable sensor devices on the sensitivity, selectivity, cost effectiveness, and electrode stability of chemical and electrochemical applications is summarized. The authors are mainly focused on the common analytes in gas sensors such as hydrogen sulfide, ammonia, and electrochemical sensors including non-enzymatic glucose, hydrazine, dopamine, and hydrogen peroxide. Finally, the article also addressed the stability of composite performance and outlined recent strategies for future sensor perspectives.