Electron-donating and -withdrawing groups discriminate the fluorometric sensing of phosgene

Phosgene, diphosgene, and chlorine are called choking agents due to their acute toxicity to the respiratory system by directly attacking through inhalation and causing acute hypoxia, asphyxia and death. For these reasons, small-molecule fluorescent probes have been developed for their detection to ensure public safety. In this regard, two thiophene-based chemodosimetric fluorescent probes TCAO ((Z)-3-(4-(dimethylamino)phenyl)thiophene-2-carbaldehyde oxime) and HMBT ((Z)-4-(2-((hydroxyimino)methyl)thiophen-3-yl)benzonitrile) were designed, synthesized and characterized using 1H-NMR, 13C NMR, FT-IR spectroscopy and HRMS methods. Probe TCAO exhibited higher selectivity and sensitivity for detecting phosgene than probe HMBT. The electron-donating group (EDG) and electron-withdrawing group (EWG) play a crucial role in detecting phosgene. TCAO, bearing EDG, exhibited a fluorescence 'turn-on' response by the NGP-assisted conversion of aldoxime to the cyano group in the presence of phosgene; whereas HMBT, bearing EWG, did not show any fluorometric response. Therefore, further studies were conducted on TCAO, and the quantum yield changed from Φ = 0.043 to Φ = 0.155 in the presence of phosgene. The limit of detection for TCAO was estimated to be as low as 51 nm. In addition, onsite monitoring for visual detection was performed using the easy-to-handle paper-strip method.

Recent advances in the transformation reactions of the Betti base derivatives

Betti bases are the products resulting from the one-pot multicomponent reaction involving 1-naphthol/2-naphthol, aliphatic/aromatic aldehydes, and secondary amines. This chemical process is commonly referred to as the Betti reaction. The significance of Betti bases in medicinal chemistry has grown substantially due to their diverse array of pharmacological applications. Furthermore, their synthetic utility is considerable, given their use as catalysts and ligands in asymmetric synthesis. Moreover, Mannich products, incorporating diverse functional groups such as -OH and -NH, find application in a range of organic reactions. This utilization enables the synthesis of novel C-C bond linkages and diverse heterocycles, including biologically active naphthoxazines, which hold biological applications such as antibacterial, antifungal and anticancer. The focus of this review article is on the application of aminonaphthol derivatives in transformation reactions and the synthesis of organic compounds, with particular emphasis on heterocycles.

Recent advances in the green synthesis of Betti bases and their applications: a review

Well-known Betti bases are the products obtained by the one-pot multicomponent reaction of 1-naphthol/2-naphthol, aliphatic/aromatic aldehydes, and secondary amines, and this reaction is known as the Betti reaction. During recent years, due to the unveiling of the pharmacological and synthetic potential of Betti bases, a tremendous increase in the studies reporting novel synthetic methods for the efficient synthesis of Betti bases was observed. This review presents the recent key developments in the green synthesis of the Betti bases and accounts for the significant number of the literature reported during 2019-2022. Both catalyst free as well as the catalyst promoted synthesis (nanocatalyst, biocatalyst, transition metal catalyst, etc.) along with the synthetic applications (catalyst, ligands/chiral auxiliaries, and valuable synthons), optoelectronic applications (fluorescence sensors for phosgene gas, Hg²⁺, and Cr³⁺ detection, quasi-reversible redox potential) and biological properties (anticancer agents, antioxidant, anti-inflammatory agents, antitubercular agents, pesticidal agents, anti-Alzheimer agents, Topoisomerase I inhibitors, YAP-TEAD interaction inhibitors, and DNA binding and cleavage activity) are discussed. There is a surge of interest for the development of the green and efficient Betti reaction for the construction of C-C and C-N bond in a single-step reaction accessing Betti bases as products. Along with key methodological developments for the green synthesis of Betti bases, their applications in synthetic organic chemistry, optoelectronic sensors, advanced materials synthesis, agrochemicals and pharmaceutically active scaffolds, during the period of 2019-2022, have been considered.

Fluorescent probes for the detection of chemical warfare agents

Chemical warfare agents (CWAs) are toxic chemicals that have been intentionally developed for targeted and deadly use on humans. Although intended for military targets, the use of CWAs more often than not results in mass civilian casualties. To prevent further atrocities from occurring during conflicts, a global ban was implemented through the chemical weapons convention, with the aim of eliminating the development, stockpiling, and use of CWAs. Unfortunately, because of their relatively low cost, ease of manufacture and effectiveness on mass populations, CWAs still exist in today's world. CWAs have been used in several recent terrorist-related incidents and conflicts (e.g., Syria). Therefore, they continue to remain serious threats to public health and safety and to global peace and stability. Analytical methods that can accurately detect CWAs are essential to global security measures and for forensic analysis. Small molecule fluorescent probes have emerged as attractive chemical tools for CWA detection, due to their simplicity, ease of use, excellent selectivity and high sensitivity, as well as their ability to be translated into handheld devices. This includes the ability to non-invasively image CWA distribution within living systems (in vitro and in vivo) to permit in-depth evaluation of their biological interactions and allow potential identification of therapeutic countermeasures. In this review, we provide an overview of the various reported fluorescent probes that have been designed for the detection of CWAs. The mechanism for CWA detection, change in optical output and application for each fluorescent probe are described in detail. The limitations and challenges of currently developed fluorescent probes are discussed providing insight into the future development of this research area. We hope the information provided in this review will give readers a clear understanding of how to design a fluorescent probe for the detection of a specific CWA. We anticipate that this will advance our security systems and provide new tools for environmental and toxicology monitoring.

A naphthimide-based ratiometric fluorescent probe for selective and visual detection of phosgene in solution and the gas phase

As a colorless, highly toxic and widely used chemical reagent, phosgene poses a potentially serious threat to public health and environmental safety. Therefore, there is an urgent need to develop a simple and sensitive method for detecting phosgene. In this work, a ratiometric fluorescent probe (NED) for phosgene was developed by utilizing 4-substituted 1,8-naphthimide unit as the fluorophore and ethylenediamine as the recognition moiety. The probe NED undergoes intramolecular cyclization reaction with phosgene, resulting in a remarkable ratiometric fluorescence response. The probe NED displays high sensitivity (LOD = 4.9 nM), excellent ratiometric fluorescence signal, and high selectivity toward phosgene over other relevant analytes. In addition, paper test strip capable of visually detecting gaseous phosgene has also been fabricated.

Sensitive and Visual Detection of Phosgene by a TICT-Based BODIPY Dye with 8-(o-Hydroxy)aniline as the Active Site

Phosgene and its substitutes (diphosgene and triphosgene) are widely utilized as chemical industrial materials and chemical warfare agents and pose a threat to public health and environmental safety due to their extreme toxicity. Research efforts have been directed to develop selective and sensitive detection methods for phosgene and its substitutes. In this paper, we have prepared two BODIPY-based fluorescent probes, o-Pah and o-Pha, which are two isomers with different active sites, ortho-aminohydroxy (3',4' or 4',3') phenyls at meso position of BODIPY, and compared their sensing performance toward triphosgene. The probe with o-(4'-amino-3'-hydroxyl), o-Pha, exhibits better sensing performance over the o-(3'-amino-4'-hydroxyl), o-Pah, for instance, a lower limit of detection (LOD) (0.34 nm vs. 1.2 nm), and more rapid response (10 s vs. 200 s). Furthermore, based on the above comparative studies, a red-fluorescence probe o-Phae has been constructed through extending 3,5-conjugation of o-Pha. The probe o-Phae displays rapid response (60 s), high sensitivity to triphosgene (LOD=0.88 nm), and high selectivity for triphosgene over relevant analytes including nitric oxide. Finally, a facile test strip for phosgene was fabricated by immobilizing o-Phae in a polyethylene oxide membrane for sensitive (<2 ppm) and selective detection of phosgene in the gas phase.

A facile dual-function fluorescent probe for detection of phosgene and nitrite and its applications in portable chemosensor analysis and food analysis

Due to the potential threats of phosgene and nitrite to public health and safety, in this work, we first proposed the application of a facile dual-function fluorescent probe 2-(1H-Benzimidazol-2-yl)Aniline (BMA) for the detection of phosgene and nitrite in different solvent environments. BMA had fast response (1 min), high selectivity and sensitivity (the limit of detection was 1.27 nM) to phosgene in CH₃CN solution (containing 10% DMSO), which manifested as a ratiometric fluorescent mode from 416 nm to 480 nm. The response of BMA to nitrite in HCl solution (pH = 1, containing 10% CH₃CN) was also highly selective and sensitive (the limit of detection was 60.63 nM), which shown as a turn-off fluorescent mode at 485 nm. In addition, two portable chemosensors (BMA-loaded TLC plates and test strips) had also been successfully manufactured for the detection of phosgene in the gas phase and nitrite in solution, which displayed good responses. Most importantly, BMA had also been successfully used for detection of nitrite in food samples, and a good recovery (88.5%-107.2%) was obtained by adding standard sodium nitrite.

An amino-substituted 2-(2′-hydroxyphenyl)benzimidazole for the fluorescent detection of phosgene based on an ESIPT mechanism

In this work, an ESIPT-based fluorescence probe, 5′-amino-2-(2′-hydroxyphenyl)benzimidazole (P1), was synthesized and explored for the ratiometric detection of phosgene. Compared to 2-(2′-hydroxyphenyl)benzimidazole (HBI), P1 exhibits high sensitivity (LoD = 5.3 nM) and selectivity toward phosgene with the introduction of the amine group. Furthermore, simple P1 loaded test papers are manufactured and display selective fluorescent detection of phosgene in the gas phase.

An easily prepared phosgene probe, 5′-amino-2-(2′-hydroxyphenyl)benzimidazole (P1), is designed and studied. Based on ESIPT mechanism, P1 exhibits ratiometric, sensitive and selective detection of phosgene both in solution and gas phase.

Regioselectivity of aminomethylation in 3-acetyl-7-hydroxycoumarins: Mannich bases and Betti bases

The atomic electron density distribution in 3-acetyl-7-hydroxycoumarin was analysed to elucidate the regioselectivity of aminomethylation.

Estrone derived 2-naphthol analogue in the diastereoselective one-pot Betti-condensation

The utility of deoxy-isoequilenine synthesized from estrone as valuable 2-naphthol analogue is demonstrated in the three components Betti-condensation. A simple, efficient and green procedure for the synthesis of aminobenzylnaphthol analogues (so-called Betti bases) has been realized highly diastereoselectively by using (S)-phenylethylamine and 1- or 2-naphthaldehyde. The absolute configuration of the new chiral compounds obtained has been determined by means of NMR experiments and confirmed by X-ray crystallography. The chiral steroidal aminobenzylnaphthols have been evaluated as pre-catalysts for the addition of diethylzinc to aldehydes with enantioselectivities of up to 98% ee.