Application of gold nanoclusters in fluorescence sensing and biological detection

Gold nanoclusters (Au NCs) exhibit broad fluorescent spectra from visible to near-infrared regions and good enzyme-mimicking catalytic activities. Combined with excellent stability and exceptional biocompatibility, the Au NCs have been widely exploited in biomedicine such as biocatalysis and bioimaging. Especially, the long fluorescence lifetime and large Stokes shift attribute Au NCs to good probes for fluorescence sensing and biological detection. In this review, we systematically summarized the molecular structure and fluorescence properties of Au NCs and highlighted the advances in fluorescence sensing and biological detection. The Au NCs display high sensitivity and specificity in detecting iodine ions, metal ions, and reactive oxygen species, as well as certain diseases based on the fluorescence activities of Au NCs. We also proposed several points to improve the practicability and accelerate the clinical translation of the Au NCs.

The Emerging Star of Carbon Luminescent Materials: Exploring the Mysteries of the Nanolight of Carbon Dots for Optoelectronic Applications

Carbon dots (CDs), a class of carbon-based nanomaterials with dimensions less than 10 nm, have attracted significant interest since their discovery. They possess numerous excellent properties, such as tunability of photoluminescence, environmental friendliness, low cost, and multifunctional applications. Recently, a large number of reviews have emerged that provide overviews of their synthesis, properties, applications, and their composite functionalization. The application of CDs in the field of optoelectronics has also seen unprecedented development due to their excellent optical properties, but reviews of them in this field are relatively rare. With the idea of deepening and broadening the understanding of the applications of CDs in the field of optoelectronics, this review for the first time provides a detailed summary of their applications in the field of luminescent solar concentrators (LSCs), light-emitting diodes (LEDs), solar cells, and photodetectors. In addition, the definition, categories, and synthesis methods of CDs are briefly introduced. It is hoped that this review can bring scholars more and deeper understanding in the field of optoelectronic applications of CDs to further promote the practical applications of CDs.

Green synthesis of fluorescent carbon nanodots from sage leaves for selective anticancer activity on 2D liver cancer cells and 3D multicellular tumor spheroids

Carbon nanodots, a family of carbon-based nanomaterials, have been synthesized through different methods from various resources, affecting the properties of the resulting product and their application. Herein, carbon nanodots (CNDs) were synthesized with a green and simple hydrothermal method from sage leaves at 200 °C for 6 hours. The obtained CNDs are well dispersed in water with a negative surface charge (ζ-potential = -11 mV) and an average particle size of 3.6 nm. The synthesized CNDs showed concentration-dependent anticancer activity toward liver cancer (Hep3B) cell lines and decreased the viability of the cancer cells to 23% at the highest used concentration (250 μg ml-1 of CNDs). More interestingly, the cytotoxicity of the CNDs was tested in normal liver cell lines (LX2) revealed that the CNDs at all tested concentrations didn't affect their viability including at the highest concentration showing a viability of 86.7%. The cellular uptake mechanisms of CNDs were investigated and they are thought to be through energy-dependent endocytosis and also through passive diffusion. The main mechanisms of endocytosis were lipid and caveolae-mediated endocytosis. In addition, the CNDs have hindered the formation of 3D spheroids from the Hep3B hepatocellular carcinoma cell line. Hence, it would be concluded that the synthesized CNDs from sage are more highly selective to liver cancer cells than normal ones. The CNDs' cancer-killing ability would be referred to as the production of reactive oxygen species.

Nitrogen and sulfur co-doped carbon quantum dots fluorescence quenching assay for detection of mercury (II)

Mercury is a highly toxic and potentially bioaccumulative heavy metal ion that can cause severe health problems in humans even at very low concentrations. Thus, the development of a simple, rapid, and sensitive assay for the effective detection of mercury ions at trace levels is of great importance. Here, nitrogen and sulfur co-doped carbon quantum dots (N,S-CQD) were synthesized by a simple hydrothermal treatment of chitosan in the presence of thiourea and citric acid with a quantum yield (QY) up to 33.0 % and used as a selective fluorescent probe to detect mercury ions (Hg²⁺). The effect of pH, ionic strength, and time on the fluorescence intensity of N,S-CQD were investigated and optimized. The synthesized N,S-CQD showed ultrasensitive ability to detect Hg²⁺ ions in the water samples, also in the presence of 11 interfering metal ions, with a low detection limit (∼4 nM) over a wide linear range from ∼5-160 nM. The sensing performance of N,S-CQD probe in real sample applications was evaluated by the detection of Hg²⁺ in lake water samples, which confirmed its potential application in environmental analysis.

Deep insights to explain the mechanism of carbon dot formation at various reaction times using the hydrothermal technique: FT-IR, 13C-NMR, 1H-NMR, and UV-visible spectroscopic approaches

A well-explained mechanism for synthesizing carbon dots (CDs) is not yet explored and is still a subject of great debate and challenge. This study used a one-step hydrothermal method to prepare highly efficient, gram-scale, excellent water solubility, and blue fluorescent nitrogen-doped carbon dots (NCDs) with the particle size average distribution of around 5 nm from 4-aminoantipyrine. The effects of varying synthesis reaction times on the structure and mechanism formation of NCDs were investigated using spectroscopic methods, namely FT-IR, 13C-NMR, 1H-NMR, and UV-visible spectroscopies. The spectroscopic results indicated that increasing the reaction time affects the structure of the NCDs. As the hydrothermal synthesis reaction time is extended, the intensity of the peaks in the aromatic region decreases, and new peaks in the aliphatic and carbonyl group regions are generated, which display enhanced intensity. In addition, the photoluminescent quantum yield increases as the reaction time increases. The presence of a benzene ring in 4-aminoantipyrine is thought to contribute to the observed structural changes in NCDs. This is due to the increased noncovalent π-π stacking interactions of the aromatic ring during the carbon dot core formation. Moreover, the hydrolysis of the pyrazole ring in 4-aminoantipyrine results in polar functional groups attached to aliphatic carbons. As the reaction time prolongs, these functional groups progressively cover a larger portion of the surface of the NCDs. After 21 h of the synthesis process, the XRD spectrum of the produced NCDs illustrates a broad peak at 21.1°, indicating an amorphous turbostratic carbon phase. The d-spacing measured from the HR-TEM image is about 0.26 nm, which agrees with the (100) plane lattice of graphite carbon and confirms the purity of the NCD product with a surface covered by polar functional groups. This investigation will lead to a greater understanding of the effect of hydrothermal reaction time on the mechanism and structure of carbon dot synthesis. Moreover, it offers a simple, low-cost, and gram-scale method for creating high-quality NCDs crucial for various applications.

Dual-template molecularly surface imprinted polymer on fluorescent metal-organic frameworks functionalized with carbon dots for ascorbic acid and uric acid detection

In this work, dual-template molecularly imprinted polymer surfaces imprinted on blue fluorescent Cr-based MOF (Cr-MOF) functionalized with yellow emissive carbon dots (Y-CDs) were prepared using l-ascorbic acid (AA) and uric acid (UA) as templates for simultaneous selective recognition of AA and UA. The as-prepared nanocomposite probe (Y-CDs/Cr-MOF@MIP) contains two recognition site cavities and emits a dual well-resolved fluorescence spectra when excited at 390 nm; blue emission (λ_em 450 nm) is due to Cr-MOF, and yellow emission (λ_em 560 nm) is due to Y-CDs. The yellow fluorescence emission of Y-CDs was quenched upon the addition of ascorbic acid, while Cr-MOF's emission remained unaffected. In the same way, the blue fluorescence emission of the Cr-MOFs was quenched in the presence of uric acid, while the yellow emission remained constant. Both emissions were quenched in a sample containing both AA and UA. This can be exploited to design a dual-template biosensor to detect UA and AA simultaneously. The Y-CDs/Cr-MOF@MIP sensor displayed a dynamic linear response for AA in the range 25.0 µM - 425.0 µM with a detection limit of 1.30 µM, and for UA in the range 25.0 µM - 425.0 µM with a detection limit of 1.10 µM. The dual-target probe Y-CDs/Cr-MOF@MIP was highly selective and sensitive for the detection of UA and AA in human urine samples due to the selectivity of the two recognition sites.

Sequential Injection Analysis for Rapid Determination of Mercury in Skincare Products Based on Fluorescence Quenching of Eco-Friendly Synthesized Carbon Dots

This work reports the analysis of mercury using a spectrofluorometric method combined with a sequential injection analysis (SIA) system. This method is based on the measurement of fluorescence intensity of carbon dots (CDs), which is quenched proportionally after adding mercury ions. Herein, the CDs underwent environmentally friendly synthesis using a microwave-assisted approach that provides intensive and efficient energy and shortens reaction time. After irradiation at 750 W for 5 min in a microwave oven, a dark brown CD solution with a concentration of 2.7 mg mL^-1 was obtained. The properties of the CDs were characterized by transmission electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and UV-vis spectrometry. We presented for the first time the use of CDs as a specific reagent for the determination of mercury in skincare products with the SIA system to achieve rapid analysis and full automatic control. The as-prepared CD stock solution was diluted 10 times and used as a reagent in the SIA system. Excitation and emission wavelengths at 360 and 452 nm, respectively, were used to construct a calibration curve. Physical parameters affecting the SIA performance were optimized. In addition, the effect of pH and other ions was investigated. Under the optimum conditions, our method showed a linear range from 0.3 to 600 mg L^-1 with an R ² of 0.99. The limit of detection was 0.1 mg L^-1. Relative standard deviation was 1.53% (n = 12) with a high sample throughput of 20 samples per hour. Finally, the accuracy of our method was validated by comparison using inductively coupled plasma mass spectrometry. Acceptable recoveries were also presented without a significant matrix effect. This method was also the first time that uses the untreated CDs for the determination of mercury(II) in skincare products. Therefore, this method could be an alternative for mercuric toxic control in other sample applications.

Ecofriendly adsorption and sensitive detection of Hg (II) by biomass-derived nitrogen-doped carbon dots: process modelling using central composite design

In this study, luminescent bio-adsorbent nitrogen-doped carbon dots (N-CDs) was produced and applied for the removal and detection of Hg (II) from aqueous media. N-CDs were synthesized from oil palm empty fruit bunch carboxymethylcellulose (CMC) and urea. According to several analytical techniques used, the obtained N-CDs display graphitic core with an average size of 4.2 nm, are enriched with active sites, stable over a wide range of pH and have great resistance to photobleaching. The N-CDs have bright blue emission with an improved quantum yield (QY) of up to 35.5%. The effect of the variables including pH, adsorbent mass, initial concentration and incubation time on the removal of Hg (II) was investigated using central composite design. The statistical results confirmed that the adsorption process could reach equilibrium within 30 min. The reduced cubic model (R² = 0.9989) revealed a good correlation between the observed values and predicted data. The optimal variables were pH of 7, dose of 0.1 g, initial concentration of 100 mg/L and duration of 30 min. Under these conditions, adsorption efficiency of 84.6% was obtained. The adsorption kinetic data could be well expressed by pseudo-second-order kinetic and Langmuir isotherm models. The optimal adsorption capacity was 116.3 mg g^-1. Furthermore, the adsorbent has a good selectivity towards Hg (II) with a detection limit of 0.01 μM due to the special interaction between Hg (II) and carboxyl/amino groups on the edge of N-CDs. This work provided an alternative direction for constructing low-cost adsorbents with effective sorption and sensing of Hg (II).

Designing of robust and sensitive assay via encapsulation of highly emissive and stable blue copper nanocluster into zeolitic imidazole framework (ZIF-8) with quantitative detection of tetracycline

Metal–organic frameworks (MOFs) with high stability and porosity have gained great attention in bioanalysis due to their potential in improving sensitivity and robustness of assays. Herein, to improve both the stability and the emission intensity of Cu nanoclusters (CuNCs), in situ entrapment strategy of CuNCs into zeolitic imidazolate framework-8 (ZIF-8) is described. Blue emissive and stable CuNCs was prepared, for the first time, using thiamine hydrochloride as capping agents, and showed strong and stable emission at 440 nm when excited at 375 nm with fluorescence quantum yields 12%. Encapsulation of CuNC into ZIF-8 showed dramatic enhancement of the fluorescence intensity up to 53% fluorescence quantum yield. Furthermore, the CuNCs@ZIF-8 possesses better stability (more than three months) due to protective and confinement effect of MOFs. Upon the addition of tetracycline to CuNCs@ZIF-8 solution, the blue emission intensity was significantly decreased. The fluorescence ratio (Fo/F) against the concentration of tetracycline exhibited a satisfactory linear relationship from 1.0 to 10.0 µM with a detection limit (LOD) of 0.30 µM. The current probe was applied for quantification of tetracycline in drug sample with satisfactory accuracy and precision.

Graphical abstract

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

Inner filter effect as a sensitive sensing platform for detection of nitrofurantoin using luminescent drug-based carbon nanodots

In the present paper, a sensitive and selective inner filter effect sensing platform was designed to detect nitrofurantoin (NIT) in pharmaceutical dosage form. Nitrogen and phosphorus co-doped carbon nanodots (CNDs) prepared via solvothermal treatment of folic acid and phosphoric acid. The prepared CNDs exhibit greenish fluorescence at 470 nm when excited at 340 nm with fluorescence quantum yield up to 40%. The CNDs exhibit high stability in various pH, temperature, and ionic strength which adds valuable merits to its pharmaceutical applications. The emission is quenched in the presence of absorber (here NIT) while the fluorophores were not quench by the presence of common pharmaceutical excipients. A fluorometric assay was fabricated to determine NIT in capsules by quenching of the CNDs. The linear response for the proposed method was from 5.0 μM to 90 μM with the detection limit being 1.4 μM. To validate the method, the recovery of NIT in spiked sample was measured which was 96.6% -103.3%. The method was applied to the determination of NIT in pharmaceutical capsule samples, with comparable results of a reference method stated by the British Pharmacopeia (BP). Furthermore, the sub-acute toxicity studies of CNDs were investigated using normal male Balb/c mice forcefully drunk with 3 different dosages of CNDs. Animals did not produce treatment related signs of toxicity or mortality in any of the animals tested during the 28 days observation period. Additionally, no significant (P > 0.05) changes in the body weight, haematological and biochemical parameters compared with the control group were not revealed. Similarly, histopathological examination of the internal vital organs did not show any morphological alterations.

Highly Luminescent and Biocompatible P and N Co-Doped Passivated Carbon Nanodots for the Sensitive and Selective Determination of Rifampicin Using the Inner Filter Effect

The determination of rifampicin in pharmaceutical dosage forms using a rapid, sensitive, selective, biocompatible, and low-cost method is of vital importance in the pharmaceutical analysis field to ensure its concentration is within the effective range when administered. In this study, nitrogen-and-phosphorous-doped carbon nanodots (CNDs) were prepared using a single-step hydrothermal method with ciprofloxacin as the starting material. The CNDs showed a highly intense blue fluorescence emission centered at 450 nm, with a photoluminescence quantum yield of about 51%. Since the absorption of rifampicin was the same as the excitation spectrum of CNDs, inner filter effect (IFE) quenching occurred and it was used as a successful detection platform for the analysis of rifampicin in capsules. The detection platform showed a dynamic linear range from 1 to 100 μM (R2 = 0.9940) and the limit of detection was 0.06 μM (when S/N = 3). The average spike recovery percentage for rifampicin in the capsule samples was 100.53% (n = 5). Moreover, the sub-chronic cytotoxicity of CNDs was evaluated on healthy male mice (Balb/c) drenched with different amounts of CNDs (10 and 50 mg/kg). During this study period, no mortalities or toxicity signs were recorded in any of the experimental subjects. Based on the cytotoxicity experiment, the proposed nano-probe is considered safe and biocompatible.