Boron-doped graphitic carbon nitride as a novel fluorescent probe for mercury(ii) and iron(iii): a circuit logic gate mimic

Synergistic effects of covalently coupled eosin-Y with Ben-graphitic carbon nitride framework for improved photocatalytic activity in solar light-driven Biginelli product generation and NADH regeneration

Elevated global pollution level is the prime reason that contributes to the onset of various harmful health diseases. The products of Biginelli reaction are enormously used in the pharmaceutical industry as they have antiviral, antibacterial, and calcium channel modulation abilities. This work reports a novel eosin Y sensitized boron graphitic carbon nitride (EY-Ben-g-C3N4) as a photocatalyst that efficiently produced 3,4-dihydropyrimidine-2-(1H)-one by the Biginelli reaction of benzaldehyde, urea, and methyl acetoacetate. The photocatalyst EY-Ben-g-C3N4 showed a successful generation of 3,4-dihydropyrimidine-2-(1H)-one (Biginelli product) in good yield via photocatalysis which is an eco-friendly method and has facile operational process. In addition to the production of Biginelli products, the photocatalyst also showed a remarkable NADH regeneration of 81.18%. The incorporation of g-C3N4 with boron helps increase the surface area and the incorporation of eosin Y which is an inexpensive and non-toxic dye, and in Ben-g-C3N4, enhanced the light-harvesting capacity of the photocatalyst. The production of 3,4-dihydropyrimidine-2-(1H)-one and NADH by the EY-Ben-g-C3N4 photocatalyst is attributed to the requisite band gap, high molar absorbance, low rate of charge recombination, and increased capacity of the photocatalyst to harvest solar light energy.

Ultrasensitive detection of Ag+and Ce3+ions using highly fluorescent carboxyl-functionalized carbon nitride nanoparticles

The fluorescence quenching of carboxyl-rich g-C3N4nanoparticles was found to be selective to Ag+and Ce3+with a limit of detection as low as 30 pM for Ag+ions. A solid-state thermal polycondensation reaction was used to produce g-C3N4nanoparticles with distinct green fluorescence and high water solubility. Dynamic light scattering indicated an average nanoparticle size of 95 nm. The photoluminescence absorption and emission maxima were centered at 405 nm and 540 nm respectively which resulted in a large Stokes shift. Among different metal ion species, the carboxyl-rich g-C3N4nanoparticles were selective to Ag+and Ce3+ions, as indicated by strong fluorescence quenching and a change in the fluorescence lifetime. The PL sensing of heavy metal ions followed modified Stern-Volmer kinetics, and CNNPs in the presence of Ag+/Ce3+resulted in a higher value ofKapp(8.9 × 104M-1) indicating a more efficient quenching process and stronger interaction between CNNP and mixed ions. Sensing was also demonstrated using commercial filter paper functionalized with g-C3N4nanoparticles, enabling practical on-site applications.

An artificial metalloenzyme that can oxidize water photocatalytically: design, synthesis, and characterization

In nature, light-driven water oxidation (WO) catalysis is performed by photosystem II via the delicate interplay of different cofactors positioned in its protein scaffold. Artificial systems for homogeneous photocatalytic WO are based on small molecules that often have limited solubility in aqueous solutions. In this work, we alleviated this issue and present a cobalt-based WO-catalyst containing artificial metalloenzyme (ArM) that is active in light-driven, homogeneous WO catalysis in neutral-pH aqueous solutions. A haem-containing electron transfer protein, cytochrome B5 (CB5), served to host a first-row transition-metal-based WO catalyst, CoSalen (CoIISalen, where H2Salen = N,N'-bis(salicylidene)ethylenediamine), thus producing an ArM capable of driving photocatalytic WO. The CoSalen ArM formed a water-soluble pre-catalyst in the presence of [Ru(bpy)3](ClO4)2 as photosensitizer and Na2S2O8 as the sacrificial electron acceptor, with photocatalytic activity similar to that of free CoSalen. During photocatalysis, the CoSalen-protein interactions were destabilized, and the protein partially unfolded. Rather than forming tens of nanometer sized CoOx nanoparticles as free CoSalen does under photocatalytic WO conditions, the CB5 : CoSalen ArM showed limited protein cross-linking and remained soluble. We conclude that a weak, dynamic interaction between a soluble cobalt species and apoCB5 was formed, which generated a catalytically active adduct during photocatalysis. A detailed analysis was performed on protein stability and decomposition processes during the harsh oxidizing reaction conditions of WO, which will serve for the future design of WO ArMs with improved activity and stability.

Highly fluorescent hydroxyl groups functionalized graphitic carbon nitride for ultrasensitive and selective determination of mercury ions in water and fish samples

Heavy metal ion pollution is always a serious problem worldwide. Therefore, monitoring heavy metal ions in environmental water is a crucial and difficult step to ensure the safety of people and the environment. A mercury ion (Hg2+) fluorescence probe with excellent sensitivity and selectivity is described here. The functionalized graphitic carbon nitride nanosheets (T/G-C3N4) fluorescence probe was fabricated using melamine as a precursor by the pyrolysis technique, followed by a rapid KOH heat treatment method for 2 min. The chemical structure and morphology of the T/G-C3N4 probe were characterized using multiple analytical techniques including UV–Vis, SEM, XPS, XRD, and fluorometer spectroscopy. Geometry optimization of T/G-C3N4 as a modified probe was performed to assess its stability and interaction ability with Hg(II) via using the density function approach. The T/G-C3N4 probe showed a linear response based on quenching over the range 0–1.25 × 103 nM Hg(II); the detection limit was 27 nM. The remarkable sensitivity of T/G-C3N4 towards the Hg2+ ions was explained by the intense coordination and fast chelation kinetics of Hg2+ with the NH2, CN, C=N, and OH groups of T/G-C3N4 nanoprobe. The T/G-C3N4 probe demonstrates exceptional selectivity for Hg2+ ions among other metal ions including (Na+, Ag+, Mg2+, Fe2+, Fe3+, Co2+, Ni2+, Cd2+, K+, Ca2+, Cu2+, Pb2+, Mn2+ and Hg2+) and over a broad pH range (6–10), together with remarkable long-term fluorescence stability in water (> 30 days) and minimal toxicity. T/G-C3N4 was used to detect and quantify Hg2+ ions in tuna and mackerel fish and the results compared to ICP-AES. The results obtained offer a new simple and green technique for the design of multifunctional fluorescent probe appropriate for environmental applications.

Graphical Abstract

Template-mediated copper doped porous g-C3N4 for efficient photodegradation of antibiotic contaminants

Graphite carbon nitride (g-C₃N₄) has great potential to treat antibiotic wastewater, but limited by small specific surface area, rapid recombination of photogenerated carriers and narrow visible light absorption range. In order to solve above problems, we designed a simple template-mediated approach by supramolecular self-assembly (Cu-melamine-cyanuric acid) to prepare copper doped porous graphitic carbon nitride (Cu-pCN) photocatalyst. The pre-organized template self-assembly driven by hydrogen bonds and electrostatic interaction, resulted in highly porous structure. The specific surface area of Cu-pCN increased to 142.8 m²/g from 11.37 m²/g of conventional bulk g-C₃N₄. In addition, the doping of Cu endowed them with better light absorption, higher separation and transfer rate of photogenerated carriers. Consequently, the obtained Cu-pCN displayed the superior photocatalytic degradation rate for tetracycline (TC) and high recycling stability.

A new fluorescence probe for detection of Cu+2 in blood samples: Circuit logic gate

A Fluorescence probe was designed based on 8-hydroxyquinoline chitosan silica precursor (HQCS) for selective detection of Al³⁺, Cu²⁺. The HQCS has no observable fluorescence signal, but after the addition of Al³⁺, a huge fluorescence signal appeared, and the selective quenching was absorbed after the addition of Cu²⁺. The effect of other different cations, including Cu²⁺, Mg²⁺, Ca²⁺, Pb²⁺, Zn²⁺, Hg²⁺, Ag⁺, Fe^3+, and K⁺ was studied. The addition of Cu²⁺ to the probe (HQCSAL) decreased the fluorescence very repeatable, and the variation of the fluorescence vs. Cu²⁺ was monotonic and linear. Therefore, the prepared probe was used to determine Cu²⁺ ions in real samples. The mechanism of fluorescence variation by adding cations to the probe solution was studied using the Stern-Volmer equation. Under the optimum conditions, the linear range and detection limit were 3.5-31 μM and 1 μM, respectively. The probe accuracy on the copper determination in the blood and tap waters was comparable to the ICP-OES results. The circuit logic gate mimic was designed for the fluorescence behavior of the probe constituents.

An On-off Supramolecular Fluorescence Switch for Detection of Pb2+ Ions and Vitamin C

β-cyclodextrin-hydroxyquinoline functionalized graphene oxide (GO-CD-HQ) was facilely fabricated to monitor and quantitatively analyze cations in aqueous media. The optical probe was notably selective enhanced toward Pb²⁺ ions over the other tested ions like Cu²⁺, Hg²⁺, Ca²⁺, Na⁺, K⁺, Zn²⁺, Fe²⁺, Fe³⁺, Ag⁺, Mg²⁺, and Cd²⁺ at 468 nm as an emission wavelength. The probe was shown the best performance in pH value, 5, and optimum time 1 min. Absorption spectra have clearly confirmed the static type fluorescence enhancement mechanism of GO-CD-HQ. Under the optimal conditions, the detection limit of it and linear concentration range for Pb²⁺ ions were obtained as 3.72 × 10^-5 M and (5-60) × 10^-5 M, respectively. Additionally, the developed assay exhibited logic gate behavior with Pb²⁺ ions and vitamin C as a masking agent for cited ions.

A simple sensitive ratiometric fluorescent probe for the detection of mercury ions in living cells and zebrafish

Mercury, as a highly toxic heavy metal, can cause very serious harm to human health and even death in severe cases. Therefore, we synthesized a novel ratiometric fluorescent probe for detecting mercury ions, with mercaptoethanol as the recognition receptor. Probe CMER could determine mercury ions in 0-1.6 μM and the detection limit is 7.6 nM. Moreover, CMER manifested a fast response for Hg²⁺ (within 5 s) and simultaneously observed that the color changed from light yellow to orange by naked eye. In addition to these preeminent spectral properties, the probe also had satisfactory bioimaging results in RAW 264.7 macrophage cells and zebrafish.

Carbon Dots-Based Logic Gates

Carbon dots (CDs)-based logic gates are smart nanoprobes that can respond to various analytes such as metal cations, anions, amino acids, pesticides, antioxidants, etc. Most of these logic gates are based on fluorescence techniques because they are inexpensive, give an instant response, and highly sensitive. Computations based on molecular logic can lead to advancement in modern science. This review focuses on different logic functions based on the sensing abilities of CDs and their synthesis. We also discuss the sensing mechanism of these logic gates and bring different types of possible logic operations. This review envisions that CDs-based logic gates have a promising future in computing nanodevices. In addition, we cover the advancement in CDs-based logic gates with the focus of understanding the fundamentals of how CDs have the potential for performing various logic functions depending upon their different categories.

Synthesis and Characterization of New Mesoporous Polyurethane-Nitrogen Doped Carbon Dot Nanocomposites: Ultrafast, Highly Selective and Sensitive Turn-off Fluorescent Sensors for Fe3+ Ions

A new fluorescent mesoporous polyurethane (PU) (9) was synthesized by reaction between 2,2'-(methylenebis(4,1-phenylene))bis(5-isocyanatoisoindoline-1,3-dione) (Diisocyanate) (5) and 4,4',4″-((1,3,5-triazine-2,4,6-triyl)tris (azanediyl))triphenol (Triol, TO) (8) (molar ratio 3:2). PU was characterized by using FT-IR, ¹H-NMR, XRD, UV-Vis, TGA, Nitrogen adsorption-desorption isotherm, BET, FE-SEM and Photoluminescence (PL) analyses. To the best of our knowledge, this is the first time that a fluorescent polyurethane has been made without the use of commercial fluorescent materials. PU has high fluorescent intensity and it is ultrafast (about few seconds), highly selective and sensitive turn-off fluorescent sensor for Fe³⁺ ions. This chemosensor exhibited a wide concentration range of (10-250)×10^-6 M Fe³⁺ with quenching efficiency (η) 97.50%. Limit of detection (LOD), limit of quantification (LOQ) and quenching constant (Ksv) values were calculated 10.10×10^-6 M, 30.60×10^-6 M and 6919.31 M^-1, respectively. Nitrogen doped carbon dots (N-doped CDs) as fluorescent nanoparticles and with the aim of improving Fe³⁺ detecting were synthesized by microwave-assisted and using citric acid monohydrate (10) and ethylenediamine (11) as carbon and nitrogen sources, respectively. Fluorescent nanocomposites (FNCs) were prepared by using casting and in-situ methods. In both methods, two nanocomposites containing 5 and 10%w of N-doped CDs were prepared. FNCs were characterized by using FT-IR, UV-Vis, XRD, TGA, Nitrogen adsorption-desorption isotherm, BET, FE-SEM and PL analyses. All nanocomposites showed better thermal property and sensitivity and lower LOD values in lower concentration of Fe³⁺ related to PU. Among them, FNC10in exhibited the best results as η, LOD, LOQ, Ksv reached 99.80%, 1.15×10^-6 M, 3.48×10^-6 M and 53,551.48 M^-1, respectively.

Ultrasensitive Fe3+ ion detection based on pH-insensitive fluorescent graphene nanosensors in strong acid and neutral media

Schematic illustration of the preparation of FRGO and the detection of Fe³⁺ ions in strong acid and neutral media.

A Fluorescent g-C3N4 Nanosensor for Detection of Dichromate Ions

Background:

Dichromate (Cr2O7 2-) ion is one of the carcinogenic and toxic spices in environment which can easily contaminate the environment due to its high solubility in water. Therefore, a lot of attention has been focused on the detection of Cr2O7 2- with high sensitivity and selectivity.

Methods:

In present work, nitrogen-rich precursor was used for synthesizing graphitic carbon nitride (g-C3N4) nanostructures through hydrothermal oxidation of g-C3N4 nanosheets. The prepared nanostructures show two distinct fluorescence emissions centered at 368 and 450 nm which are highly sensitive toward Cr2O7 2- ions.

Results:

The as-prepared g-C3N4 was characterized by several techniques such as Fourier-Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and fluorescence emission spectra. The XRD pattern of prepared nanostructures illustrated two diffraction patterns (at 13.4° and 27.6°) indicating tri-s-tri-azine-based structures. The g-C3N4 exhibited good selectivity and sensitivity toward Cr2O7 2- among other anions. According to titration test, the detection limit and stern-volmer constant (Ksv) were calculated as 40 nM and 0.13×106 M-1, respectively. The investigation of quenching mechanism shows that Cr2O7 2- may form hydrogen bonding with surface groups of g-C3N4 (such as NH2, OH and COOH) resulted in more fluorescence quenching in comparison with the pure inner filter effect.

Conclusion:

The g-C3N4 nanostructures were successfully synthesized through the hydrothermal oxidation. The as-prepared g-C3N4 can be used as a highly sensitive fluorescent probe for the selective determination of Cr2O7 2 ion among other anions. The quenching mechanism was experimentally studied. According to reliable responses in real sample tests, it can be proposed that g-C3N4 nanostructure is a suitable sensitive nanosensor for detection of Cr2O7 2 ions in aqueous media.

Fluorescence turn off-on probe (β-cyclodextrin-hydroxyquinoline) for monitoring of Cd2+ ions and tetracycline

In this paper, a photoluminescent turn off-on switch probe β-cyclodextrin-hydroxyquinoline (β-CD-HQ) was efficiently applied for detection and measurement of Cd²⁺ ions and detection of tetracycline. The proposed assay has shown an excellent selective fluorescence response toward Cd²⁺ ions over other ions like Al³⁺, Pb²⁺, Zn²⁺, Co²⁺, K⁺, Na⁺ and Sr²⁺. The fluorescence emission intensity of the probe is slightly affected by competing ions. In optimum pH value, 4, the limit of detection and linear concentration range were 0.05 nM and 0.1-1.5 nM, respectively. Additionally, the extraordinary output signal of β-CD-HQ was utilized to investigate the logic behavior of β-CD-HQ in the aqueous media. Accordingly, a solid support logic circuit was made by producing the fluorescence output signal under the stimulation of Cd²⁺ ions and tetracycline as inputs.

Coumarin Thiourea-Based Fluorescent Turn-on Hg2+ Probe That Can Be Utilized in a Broad pH Range 1-11

A novel coumarin-thiourea conjugate was synthesized facilely. It served as a fluorescent turn-on chemosensor for selective detection of Hg²⁺ ion over other common competitive metal ions including Li⁺, Na⁺, K⁺, Ag⁺, Cu²⁺, Fe²⁺, Zn²⁺, Co²⁺, Ni²⁺, Mn²⁺, Sr²⁺, Ca²⁺, Mg²⁺, Al³⁺, Cr³⁺ and Fe³⁺ ions based on the Hg²⁺-promoted desulfurization and cyclization reactions. Addition of Hg²⁺ ion to the sensor solution in 2:8 EtOH/H₂O induced a hypsochromic shift of the UV-Vis absorption band from 360 nm to 340 nm accompanying distinct enhancement in the absorption intensity while addition of other metal ions failed to bring about substantial change in the absorption spectra. Addition of Hg²⁺ to the sensor solution also caused marked increase in the fluorescence emission intensity and most common competitive metal ions did not interfere with the selective sensing of Hg²⁺ ion by the sensor. The detection limit of Hg²⁺ ion by the probe was calculated to be 1.46 × 10^-7 M and the probe could be utilized for selective detection of Hg²⁺ ion by fluorescence turn-on mode over a broad pH range of 1-11.