Oxadiazole Schiff Base as Fe3+ Ion Chemosensor: "Turn-off" Fluorescent, Biological and Computational Studies

Compound, (E)-5-(4-((thiophen-2-ylmethylene)amino)phenyl)-1,3,4-oxadiazole-2-thiol (3) was synthesized via condensation reaction of 5-(4-aminophenyl)-1,3,4-oxadiazole-2-thiol with thiophene-2-carbaldehyde in ethanol. For the synthesis and structural confirmation the FT-IR, ¹H, ¹³C-NMR, UV-visible spectroscopy, and mass spectrometry were carried out. The long-term stability of the probe (3) was validated by the experimental as well as theoretical studies. The sensing behaviour of the compound 3 was monitored with various metal ions (Ca²⁺, Cr³⁺, Fe³⁺, Co²⁺, Mg²⁺, Na⁺, Ni²⁺, K⁺) using UV- Vis. and fluorescence spectroscopy techniques by various methods (effect of pH and density functional theory) which showing the most potent sensing behaviour with iron. Job's plot analysis confirmed the binding stoichiometry ratio 1:1 of Fe³⁺ ion and compound 3. The limit of detection (LOD), the limit of quantification (LOQ), and association constant (K_a) were calculated as 0.113 µM, 0.375 µM, and 5.226 × 10⁵ respectively. The sensing behavior was further confirmed through spectroscopic techniques (FT-IR and ¹H-NMR) and DFT calculations. The intercalative mode of binding of oxadiazole derivative 3 with Ct-DNA was supported through UV-Vis spectroscopy, fluorescence spectroscopy, viscosity, cyclic voltammetry, and circular dichroism measurements. The binding constant, Gibb's free energy, and stern-volmer constant were find out as 1.24 × 10⁵, -29.057 kJ/mol, and 1.82 × 10⁵ respectively. The cleavage activity of pBR322 plasmid DNA was also observed at 3 × 10^-5 M concentration of compound 3. The computational binding score through molecular docking study was obtained as -7.4 kcal/mol. Additionally, the antifungal activity for compound 3 was also screened using broth dilution and disc diffusion method against C. albicans strain. The synthesized compound 3 showed good potential scavenging antioxidant activity against DPPH and H₂O₂ free radicals.

Exploring the Photophysics of a Zn2+ Fluorescence Sensor and Its Sensing Mechanism

Sensor X is a turn-on sensor, which is applied in the fluorescence detection of Zn²⁺ ions. Its photophysical process is comprehensively investigated to clarify its weak fluorescence. With the aid of density functional theory (DFT) and time-dependent density functional theory (TDDFT), the potential energy surfaces (PES) of X on both ground and first excited states are studied. Excited-state intramolecular proton transfer (EPT) processes as well as molecule twisting motion are observed, which induces several minima on the excited-state PES. Transition states as well as rate constants for these dynamic processes are obtained to evaluate their occurrences. The twisting motion of the sensor is an ultrafast process, which is initiated by a specific EPT process and leads to a nonemissive twisted intramolecular charge transfer (TICT) state. The fluorescence of the sensor is barely observable because of the easily attainable TICT state on the excited PES. This mechanism is trustworthy and intrinsically different from the previously proposed mechanism. After clarifying the photophysical process of the sensor, the Zn²⁺ sensing mechanism is uncovered. Also, the selectivity against Cd²⁺ and Hg²⁺ is fully discussed.

Biphenyl Containing Amido Schiff base Derivative as a Turn-on Fluorescent Chemosensor for Al3+ and Zn2+ ions

A hydrazine derived Bis(2-hydroxybenzylidene)-[1,1'-biphenyl]-2,2'-dicarbohydrazide (sensor 1) has been synthesized and its sensing properties towards metal ions has been demonstrated using simple UV-visble spectroscopic, fluorometric technique and visible colour change. The...

A novel double target fluorescence probe for Al3+/Mg2+ detection with distinctively different responses and its applications in cell imaging

The metal cations, Al³⁺ and Mg²⁺, could affect human health and cell biological processes. Their fast and selective detection using one probe remains a challenge. A novel fluorescence probe, N'-((1-hydroxynaphthalen-2-yl)methylene)isoquinoline-3-carbohydrazide (NHMI), was developed for selectively monitoring Al³⁺ and Mg²⁺. The probe NHMI showed a distinctive "turn-on" fluorescence signal towards Al³⁺ and Mg²⁺ (cyan for Al³⁺ with 2556-folds enhancement and yellow for Mg²⁺ with 88-folds enhancement), which is quite distinct from other metal cations and allows for naked-eye detection. This interesting response was attributed to the influence of PET, ESIPT process and CHEF effect, when Al³⁺ or Mg²⁺ chelated with NHMI. Furthermore, the fluorescence titration experiments manifested that the detection limit of probe NHMI for Al³⁺/Mg²⁺ was as low as 1.20 × 10^-8 M and 7.69 × 10^-8 M, respectively. The formed complexes NHMI-Al³⁺ and NHMI-Mg²⁺ were analyzed by Job's plot, ESI-MS, ¹H NMR and FT-IR. The coordination pockets and fluorescence mechanisms of two metal complexes were explored by density functional theory calculation. Moreover, NHMI showed low cytotoxicity and good cell permeability. Fluorescence bioimaging of Al³⁺/Mg²⁺ in MCF-7 cells with NHMI indicated its potential application in biological diagnostic analysis.

Solvent-Regulated Fluorimetric Differentiation of Al3+ and Zn2+ Using an AIE-Active Single Sensor

The absence of d-orbital electrons or presence of full-filled d-orbital electrons in metal ions is a well-known Achilles' heel problem for the detection of these metal ions by a simple UV-visible study. For this reason, detection of metal ions such as Al³⁺ with no d-orbital electrons or Zn²⁺ with filled d-orbital electrons is a challenging task. Herein, we report a 2-naphthol-based fluorescent probe [1-((E)-((E)-(5-bromo-2-hydroxybenzylidene)hydrazono)methyl)naphthalen-2-ol] (H₂L) that has been used to sense and discriminate Al³⁺ and Zn²⁺ via solvent regulation. The probe exhibits excellent selectivity and swift sensitivity toward Al³⁺ in MeOH-water (9:1, v/v) and toward Zn²⁺ in dimethyl sulfoxide (DMSO)-water (9:1, v/v) among various metal ions. The respective detection limit is found to be 9.78 and 3.65 μM. The sensing mechanism is attributed to multiple processes, viz., the inhibition of photo-induced electron transfer (PET) along with the introduction of chelation-enhanced emission (CHEF) and excited-state intramolecular proton transfer (ESIPT) inhibition, which are experimentally well verified by UV-vis absorption spectroscopy, emission spectroscopy, and NMR spectroscopy. The probe shows aggregation-induced emissive (AIE) response in ≥70% aqueous media as well as in the solid state. The experimental results are well corroborated by time-resolved photoluminescence (TRPL) and density functional theory (DFT) calculations. An advanced-level OR-AND-NOT logic gate has been constructed from a different chemical combinational input and emission output. The reversible recognition of both Al³⁺ in MeOH-water (9:1, v/v) and Zn²⁺ in DMSO-water (9:1, v/v) is also ascertained in the presence of Na₂EDTA, enabling the construction of a molecular memory device. The probe H₂L also detects intracellular Al³⁺/Zn²⁺ ions in Hela cells. Altogether, our fundamental findings will pave the way for designing and synthesis of unique chemosensors that could be used for cell imaging studies as well as constructing molecular logic gates.

Designed Synthesis of Fluorescence 'Turn-on' Dual Sensor for Selective Detection of Al3+ and Zn2+ in Water

1-(Pyridin-2-yl-hydrazonomethyl)-naphthalen-2-ol (PNOH) is a naphthalene-based fluorescence dual chemo-sensor for Al³⁺ and Zn²⁺. The probe (PNOH) is spectroscopically characterised and the chemo-sensing mechanism has been demonstrated through ¹H NMR, absorption and both steady state and time resolved fluorescence study. The 'turn-on' luminescence property of PNOH is used for the selective detection of trace amount of Al³⁺and Zn²⁺via chelation enhanced fluorescence (CHEF) through complex formation. The 1:1 stoichiometry of each sensor-metal complex is observed from Job's plot based on UV-Vis titration. Most promising advantage of the probe (PNOH) is its application in the one-pot detection of Al³⁺ (λem- 460 nm) and Zn²⁺ (λ_em- 510 nm) exciting at same wavelength (λ_ex- 420 nm) while high intense emission appears at two different wavelengths. Limit of detection (LOD) of PNOH towards Al³⁺ & Zn²⁺ are found to be 60 nM & 365 nM respectively. Real water sample analysis has also been demonstrated by using the probe PNOH.

A novel quinoline-based turn-on fluorescent probe for the highly selective detection of Al (III) and its bioimaging in living cells, plants tissues and zebrafish

A novel quinoline fluorescent probe QNP ((E)-N'-(5-chloro-2-hydroxybenzylidene) quinoline-2-carbohydrazide) for detection of Al3+ ion was designed, synthesized and characterized. QNP displayed a high fluorescence enhancement in the presence of Al3+ ion in DMF:PBS (99:1, v/v) solution and the detection limit was as low as 1.25 μM with high selectivity and excellent sensitivity from 0 to 3 μM. The sensing ability of QNP towards Al3+ ion is attributed to the synergistic effect of PET and ICT. Furthermore, the binding stoichiometry between QNP and Al3+ ion is of 1:1 by Job's plot and mass spectrum, and the calculated binding constant is 4.29 × 108 M-1. The detection of Al3+ ion in water samples illustrates that QNP could be applied to the detection of practical samples in the environment. Bioimaging experiments on Hela cells, zebrafish and soybean root tissues demonstrate that it has potential application to investigate biological processes involving Al3+ ion within living cells. A quinoline-based turn-on fluorescence probe for the detection of Al3+ and its bioimaging in living cells, plant, and zebrafish.

Schiff base-functionalized silatrane-based receptor as a potential chemo-sensor for the detection of Al3+ ions

Excess Al³⁺ ions are considered toxic to living organisms.

Design, synthesis and photophysical aspects of 1,2,3-triazole appended Schiff base functionalized silanes and silatranes

This article represents the synthesis of 1,2,3 triazoles allied Schiff base functionalized silanes and silatranes. The silane 5a and silatrane 6a were investigated for their photophysical potential via absorption and emission spectroscopy and found selective for Sn(ii).

C3-symmetric triaminoguanidine based colorimetric and fluorometric chemosensor: Sequential detection of Zn2+/PPi, its RGB performance for detection of Zn2+ ion and construction of IMPLICATION logic gate

In this work, new ethyl(E)-2-cyano-3-(1H-pyrrol-2-yl)acrylate appended C₃-symmetric star-shape triaminoguanidine based Schiff base (LH₃) was designed and synthesized from simple synthons. New probe, LH₃ was completely analyzed by ¹H NMR, ¹³C NMR and mass spectrum. In the present probe LH₃, effective π-conjugated ethyl(E)-2-cyano-acrylate unit was introduced on the periphery of the pyrrole-triaminoquanidine conjugates by using carefully chosen building units. The probe LH₃ shows high selectivity and sensitivity towards Zn²⁺ ion via colorimetric and fluorometric changes. The yellowish orange color of LH₃ solution turned to wine red color upon addition of Zn²⁺ solution, along with red shifted absorption maxima from 450 nm to 550 nm, this indicates the formation of LH₃-Zn²⁺ species. Job's plot and mass spectrum analysis confirms the formation of 1:3 stoichiometric complex between the LH₃ and Zn²⁺ ions. Further this ensemble shows selective detection towards PPi anion over the other anions based on displacement metal ion approach. Hence, reversible colorimetric/emission response of LH₃ towards Zn²⁺ and PPi ions via "on-off-on" manner could allow the construction of IMPLICATION logic gate functions. The practical efficacy of the probe LH₃ was established by utilization of the probe for the detection of Zn²⁺ ions in real water sample analysis. Further, the significant noticeable colorimetric changes of the probe LH₃ upon addition of Zn²⁺ ion have been successfully integrated with a smartphone app RGB color value to construct a real-time analysis of Zn²⁺ ions.

A selective “turn-on” sensor for recognizing In3+ and Zn2+ in respective systems based on imidazo[2,1-b]thiazole

An imidazo[2,1-b]thiazole-based compound (X) was designed and synthesized as an “off–on–off” sensor for the multiple recognition of In³⁺ and Zn²⁺ in different systems.

A fluorescence probe based on 6-phenylimidazo[2,1-b]thiazole and salicylaldehyde for the relay discerning of In3+ and Cr3+

A new fluorescence probe, (E)-N′-(2-hydroxybenzylidene)-6-phenylimidazo[2,1-b]thiazole-3-carbohydrazide (LB1), based on 6-phenylimidazo[2,1-b]thiazole and salicylaldehyde was designed and synthesized.

An efficient water-soluble fluorescent chemosensor based on furan Schiff base functionalized PEG for the sensitive detection of Al3+ in pure aqueous solution

An efficient reversible fluorescent chemosensor, PEGFB, based on polyethylene glycol bearing a furan Schiff base unit has been successfully developed to sensitively detect Al³⁺ in pure aqueous solution.