Sonophotocatalytic degradation of sulfamethoxazole using lanthanum ferrite perovskite oxide anchored on an ultrasonically exfoliated porous graphitic carbon nitride nanosheet

The lanthanum ferrite perovskite (La0.8FO) was synthesized using a citric combustion route and then modified with a porous graphitic nitride nanosheet via the wet impregnation-assisted ultrasonic method to produce La0.8FO@PgNS. Various techniques such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, X-ray photoelectron spectroscopy (XPS), ultraviolet diffuse reflectance spectroscopy (UV-DRS), and Tauc plot analysis were employed to confirm the functional moieties, crystallinity, phase change, morphology, composition, and bandgap of La.0.8FO and La0.8FO@PgNS. La0.8FO and La0.8FO@PgNS were used for the sonophotocatalytic oxidative degradation of sulfamethoxazole (SMX) under low energy and ultrasound wave frequency in the presence of visible light. La0.8FO and La0.8FO@PgNS exhibited a sonophotocatalytic degradation capacity of 52.06 and 99.60%, respectively. Furthermore, the rate constant at the optimum condition of pH 7 and 5 mg L-1 concentration was 0.01343 and 0.01494 min-1 for La0.8FO and La0.8FO@PgNS, respectively. The integration of sonolysis and photocatalysis in the remediation process of SMX resulted in a synergy of 2.5-fold. Ultrasonic waves and hydroxyl and superoxide radicals are the main species governing the degradation process while La0.8FO@PgNS was stable over 8 cycles, proving to be a sustainable material for environmental remediation.

Synthesis and performance evaluation of S-scheme heterostructured LaFeO3/TiO2 photocatalyst for the efficient degradation of thiamethoxam

The application of perovskite lanthanum ferrite (LaFeO3) as a photocatalyst has shown significant potential in the removal of persistent organic and inorganic contaminants. In the present research, LaFeO3 and various composites consisting of LaFeO3 and TiO2 were prepared. The photocatalytic efficiency of the produced catalysts was assessed by measuring their effectiveness in degrading thiamethoxam, a pesticide belonging to the second generation of neonicotinoids. Experimental investigations were carried out to examine the impact of various factors on the degradation process, including variables like concentration of thiamethoxam, catalyst amount, and pH level. The produced catalysts were characterized by various techniques, including field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller (BET) analysis, X-ray diffraction (XRD), ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS), photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS). The highest degradation rates were observed when using the synthesized catalyst, 1% LaFeO3/TiO2 (LFTO1), under both UV-C and direct sunlight conditions. This performance outperformed TiO2 and bare LaFeO3. When exposed to ultraviolet (UV-C) radiation at an intensity of 15 W m-2 and under neutral pH conditions, LFTO1 achieved approximately 97% degradation, while under direct sunlight, the LFTO1 photocatalyst exhibited a degradation rate of 79% within a 120-min reaction period. The enhanced activity of LFTO1 could be attributed to its increased surface area, reduced bandgap, and lower electron-hole recombination. The investigation of reaction kinetics showed that the degradation of thiamethoxam followed a pseudo-first-order rate law. Furthermore, LFTO1 can be employed up to 5 times without experiencing any loss in its catalytic activity, thus confirming its long-term utility.

Removal of sulfonylurea herbicides with g-C3N4-based photocatalysts: A review

The accumulation of agricultural chemicals in the environment has become a global concern, of which sulfonylurea herbicides (SUHs) constitute a significant category. Solar-driven photocatalysis is favored for removing organic pollutants due to its high efficiency and environmental friendliness. Graphite carbon nitride (g-C3N4)-based materials with superior catalytic activities and physicochemical stabilities are promising photocatalysts. This review describes the g-C3N4-based materials and their uses in the photocatalytic degradation of SUHs or other organic pollutants with similar structures. First, the fundamentals of g-C3N4-based materials and photocatalytic SUHs degradation are discussed to provide an in-depth understanding of the mechanism for the photocatalytic activity. The ability of different g-C3N4-based materials to photocatalytically degrade SUH-like structures is then discussed and summarized based on different modification strategies (morphology modulation, elemental doping, defect engineering, and heterojunction formations). Meanwhile, the effects of different environmental factors on the photocatalytic performance of g-C3N4-based materials are described. Finally, the major challenges and opportunities of g-C3N4-based materials for the photocatalytic degradation of SUHs are proposed. It is hoped that this review will show the feasibility of photocatalytic degradation of SUHs with g-C3N4-based materials.

Synthesis, characterization, and sensitivity tests of La0.8Ba0.1Bi0.1FeO3 nanoparticles towards a few parts-per-billion of acetone gas

In the present paper, the La0.8Ba0.1Bi0.1FeO3 powders were synthesized via the auto-combustion method. The optical, the positron annihilation spectroscopy and the gas sensing properties of our sample were investigated simultaneously. FTIR spectrum revealed the antisymmetric deformation vibrations of the Fe-O and Fe-O-Fe bonds inside the octahedron FeO6. The optical bandgap (Egap) of the La0.8Ba0.1Bi0.1FeO3 compound was found to be equal to 2.23 eV. We confirmed by the positron annihilation studies, the existence of open volume defects and vacancy sized defects, at the grain/interfaces between vacancy clusters and grains at the interfaces intersection (triple-lines). Notably, the La0.8Ba0.1Bi0.1FeO3 perovskite exhibits an excellent response toward acetone gas, with ultra-fast response and recovery times to some parts-per-billion (ppb) of this tested gas.

Fe-doped g-C3N4 with duel active sites for ultrafast degradation of organic pollutants via visible-light-driven photo-Fenton reaction: Insight into the performance, kinetics, and mechanism

The photo-Fenton process provides a sustainable and cost-effective strategy for removing refractory organic contaminants in wastewater. Herein, a high-efficient Fe-doped g-C3N4 photocatalyst (Fe@CN10) with a unique 3D porous mesh structure was prepared by one-pot thermal polymerization for ultrafast degradation of azo dyes, antibiotics, and phenolic acids in heterogeneous photo-Fenton systems under visible light irradiation. Fe@CN10 exhibited a synergy between adsorption-degradation processes due to the co-existence of Fe3C and Fe3N active sites. Specifically, Fe3C acted as an adsorption site for pollutant and H2O2 molecules, while Fe3N acted as a photocatalytic active site for the high-efficient degradation of MO. Resultingly, Fe@CN10 showed a photocatalytic degradation rate of MO up to 140.32 mg/L min-1. The dominant ROS contributed to the removal of MO in the photo-Fenton pathway was hydroxyl radical (•OH). Surprisingly, as the key reactive species, singlet oxygen (1O2) generated from superoxide radical (•O2-) also efficiently attacked MO in a photo-self-Fenton pathway. Additionally, sponge/Fe@CN10 was prepared and filled in the continuous flow reactors for nearly 100% degradation of MO over 150 h when treating artificial organic wastewater. This work provided a facile route to prepare highly-active Fe-doped photocatalysts and develop a green photocatalytic system for wastewater treatment in the future.

Novel surface structure of LaFeO3/nitrogen-deficient g-C3N4 nanocomposites to improve visible-light photocatalytic performance toward phenol removal

Herein, novel surface structure LaFeO3/nitrogen-deficient g-C3N4 nanocomposites (LaFeO3/g-C3N4-H) have been successfully synthesized by a two-step process. First, nitrogen-deficient graphitic carbon nitride (g-C3N4-H) was produced by thermally condensing melamine that had been treated with acetic acid as a precursor. After that, LaFeO3 was incorporated into the g-C3N4-H nanosheets. The as-prepared nanostructured materials were characterized by XRD, FT-IR, N2 adsorption-desorption experiments, FESEM, and TEM, demonstrating the formation of interfacial interaction and heterogeneous structure in LaFeO3/g-C3N4-H nanocomposites. Additionally, UV-vis diffuse reflectance spectra (DRS) and photoluminescence spectra (PL) have been used to assess the optical properties of the nanohybrids. The results show that the LaFeO3/g-C3N4-H nanocomposite was successfully produced with a reliable interfacial interface, and produced a good heterojunction relationship between g-C3N4-H and LaFeO3 which may significantly boost the photocatalytic activity as compared to prinstine g-C3N4 and LaFeO3. Phenol degradation under visible light irradiation was used to test the photocatalytic activity of LaFeO3/g-C3N4-H, and the results showed that 10%-LaFeO3/g-C3N4-H had significant photocatalytic activity and remarkable adsorption efficiency, with an overall removal rate of phenol up to 88% after 180 min of visible light irradiation. This study may present a novel method for developing highly efficient artificial photocatalytic systems.

Graphitic carbon nitride (g-C3N4)-assisted materials for the detection and remediation of hazardous gases and VOCs

Graphitic carbon nitride (g-C3N4)-based materials are attracting attention for their unique properties, such as low-cost, chemical stability, facile synthesis, adjustable electronic structure, and optical properties. These facilitate the use of g-C3N4 to design better photocatalytic and sensing materials. Environmental pollution by hazardous gases and volatile organic compounds (VOCs) can be monitored and controlled using eco-friendly g-C3N4- photocatalysts. Firstly, this review introduces the structure, optical and electronic properties of C3N4 and C3N4 assisted materials, followed by various synthesis strategies. In continuation, binary and ternary nanocomposites of C3N4 with metal oxides, sulfides, noble metals, and graphene are elaborated. g-C3N4/metal oxide composites exhibited better charge separation that leads to enhancement in photocatalytic properties. g-C3N4/noble metal composites possess higher photocatalytic activities due to the surface plasmon effects of metals. Ternary composites by the presence of dual heterojunctions improve properties of g-C3N4 for enhanced photocatalytic application. In the later part, we have summarised the application of g-C3N4 and its assisted materials for sensing toxic gases and VOCs and decontaminating NOx and VOCs by photocatalysis. Composites of g-C3N4 with metal and metal oxide give comparatively better results. This review is expected to bring a new sketch for developing g-C3N4-based photocatalysts and sensors with practical applications.

Synthesis of magnetic graphene-like carbon nitride-cobalt ferrite (g-C3N4/CoFe2O4) nanocomposite for sonocatalytic remediation of toxic organic dyes

A novel magnetic g-C₃N₄/CoFe₂O₄ nanocomposite was successfully synthesized by a simple hydrothermal method and applied as a new graphene-like carbon nitride-based sonocatalyst for sonodegradation of pollutant dyes. The as-prepared samples were characterized by using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflectance spectroscopy (DRS), BET surface area measurements and photoluminescence (PL) spectroscopy. The results indicate that the nanocomposite sample is composed of spherical CoFe₂O₄ nanoparticles adhered to g-C₃N₄ naosheets. The g-C₃N₄/CoFe₂O₄ nanocomposites were used as a new magnetically separable sonocatalyst in H₂O₂-assisted sonodegradation of methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) dyes in aqueous media. The results showed complete degradation (ca. 100%) of dyes within short times (30-35 min). The sonocatalytic activity of graphitic carbon nitride (g-C₃N₄) was greatly enhanced with CoFe₂O₄ modification. Trapping experiments indicated that the g-C₃N₄/CoFe₂O₄ nanocomposites serves as a generator of hydroxyl radical (˙OH) via activation of H₂O₂ for degradation of dyes under ultrasound irradiation. Furthermore, the magnetic sonocatalyst can be separated from solution by an external magnet and reused several times without observable loss of activity. The possible mechanism of sonocatalytic activity was also proposed according to experimental results.

Microwave Synthesis of Visible-Light-Activated g-C3N4/TiO2 Photocatalysts

The preparation of visible-light-driven photocatalysts has become highly appealing for environmental remediation through simple, fast and green chemical methods. The current study reports the synthesis and characterization of graphitic carbon nitride/titanium dioxide (g-C₃N₄/TiO₂) heterostructures through a fast (1 h) and simple microwave-assisted approach. Different g-C₃N₄ amounts mixed with TiO₂ (15, 30 and 45 wt. %) were investigated for the photocatalytic degradation of a recalcitrant azo dye (methyl orange (MO)) under solar simulating light. X-ray diffraction (XRD) revealed the anatase TiO₂ phase for the pure material and all heterostructures produced. Scanning electron microscopy (SEM) showed that by increasing the amount of g-C₃N₄ in the synthesis, large TiO₂ aggregates composed of irregularly shaped particles were disintegrated and resulted in smaller ones, composing a film that covered the g-C₃N₄ nanosheets. Scanning transmission electron microscopy (STEM) analyses confirmed the existence of an effective interface between a g-C₃N₄ nanosheet and a TiO₂ nanocrystal. X-ray photoelectron spectroscopy (XPS) evidenced no chemical alterations to both g-C₃N₄ and TiO₂ at the heterostructure. The visible-light absorption shift was indicated by the red shift in the absorption onset through the ultraviolet-visible (UV-VIS) absorption spectra. The 30 wt. % of g-C₃N₄/TiO₂ heterostructure showed the best photocatalytic performance, with a MO dye degradation of 85% in 4 h, corresponding to an enhanced efficiency of almost 2 and 10 times greater than that of pure TiO₂ and g-C₃N₄ nanosheets, respectively. Superoxide radical species were found to be the most active radical species in the MO photodegradation process. The creation of a type-II heterostructure is highly suggested due to the negligible participation of hydroxyl radical species in the photodegradation process. The superior photocatalytic activity was attributed to the synergy of g-C₃N₄ and TiO₂ materials.

A Targeted Review of Current Progress, Challenges and Future Perspective of g-C3 N4 based Hybrid Photocatalyst Toward Multidimensional Applications

The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO₂ reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C₃ N₄ is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7 eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C₃ N₄ is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C₃ N₄ with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C₃ N₄ to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C₃ N₄ were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO₂ reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C₃ N₄ based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.

Insights into Photocatalytic Degradation Pathways and Mechanism of Tetracycline by an Efficient Z-Scheme NiFe-LDH/CTF-1 Heterojunction

Photocatalysis offers a sustainable approach for recalcitrant organic pollutants degradation, yet it is still challenging to seek robust photocatalysts for application purposes. Herein, a novel NiFe layered double hydroxide (LDH)/covalent triazine framework (CTF-1) Z-scheme heterojunction photocatalyst was rationally designed for antibiotics degradation under visible light irradiation. The NiFe-LDH/CTF-1 nanocomposites were readily obtained via in situ loading of NiFe-LDH on CTF-1 through covalent linking. The abundant coupling interfaces between two semiconductor counterparts lay the foundation for the formation of Z-scheme heterostructure, thereby effectively promoting the transfer of photogenerated electrons, inhibiting the recombination of carriers, as well as conferring the nanocomposites with stronger redox ability. Consequently, the optimal photocatalytic activity of the LDH/CTF heterojunction was significantly boosted for the degradation of a typical antibiotic, tetracycline (TC). Additionally, the photodegradation process and the mineralization of TC were further elucidated. These results envision that the LDH/CTF-1 can be a viable photocatalyst for long-term and sustainable wastewater treatment.

Recent Advancement of the Current Aspects of g-C3 N4 for its Photocatalytic Applications in Sustainable Energy System

Being one of the foremost enticing and intriguing innovations, heterogeneous photocatalysis has also been used to effectively gather, transform, and conserve sustainable sun's radiation for the production of efficient and clean fossil energy as well as a wide range of ecological implications. The generation of solar fuel-based water splitting and CO₂ photoreduction is excellent for generating alternative resources and reducing global warming. Developing an inexpensive photocatalyst can effectively split water into hydrogen (H₂ ), oxygen (O₂ ) sources, and carbon dioxide (CO₂ ) into fuel sources, which is a crucial problem in photocatalysis. The metal-free g-C₃ N₄ photocatalyst has a high solar fuel generation potential. This review covers the most recent advancements in g-C₃ N₄ preparation, including innovative design concepts and new synthesis methods, and novel ideas for expanding the light absorption of pure g-C₃ N₄ for photocatalytic application. Similarly, the main issue concerning research and prospects in photocatalysts based g-C₃ N₄ was also discussed. The current dissertation provides an overview of comprehensive understanding of the exploitation of the extraordinary systemic and characteristics, as well as the fabrication processes and uses of g-C₃ N₄ .

A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)-Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

g-C3N4 has drawn lots of attention due to its photocatalytic activity, low-cost and facile synthesis, and interesting layered structure. However, to improve some of the properties of g-C3N4, such as photochemical stability, electrical band structure, and to decrease charge recombination rate, and towards effective light-harvesting, g-C3N4-metal oxide-based heterojunctions have been introduced. In this review, we initially discussed the preparation, modification, and physical properties of the g-C3N4 and then, we discussed the combination of g-C3N4 with various metal oxides such as TiO2, ZnO, FeO, Fe2O3, Fe3O4, WO3, SnO, SnO2, etc. We summarized some of their characteristic properties of these heterojunctions, their optical features, photocatalytic performance, and electrical band edge positions. This review covers recent advances, including applications in water splitting, CO2 reduction, and photodegradation of organic pollutants, sensors, bacterial disinfection, and supercapacitors. We show that metal oxides can improve the efficiency of the bare g-C3N4 to make the composites suitable for a wide range of applications. Finally, this review provides some perspectives, limitations, and challenges in investigation of g-C3N4-metal-oxide-based heterojunctions.

Hydrogen production via water splitting over graphitic carbon nitride (g-C3N4 )-based photocatalysis

Photocatalytic splitting of water into hydrogen and oxygen using semiconductor photocatalysts and light irradiation has been attracted much attention and considered to be an alternative for nonrenewable fossil fuel to solve environmental problems and energy crisis and also an as promising approach to produce clean, renewable hydrogen fuel. Owing to their various advantages such as low cost and environmental friendly, chemical, and thermal stability, appropriate band structure, graphitic carbon nitride (g-C3N4 ) photocatalysts have gained multitudinous attention because of their great potential in solar fuels production and environmental remediation. However, due to its fast charge carrier’s recombination, low surface, and limited absorption of the visible light restrict their activity toward hydrogen evolution and numerous modification techniques were applied to solve these problems such as structural modification, metal/nonmetal doping, and noble metal loading, and coupling semiconductors. In this chapter, we summarize recent progress in the synthesis and characterization of the g-C3N4-based photocatalyst. Several modification methods used to enhance the photocatalytic hydrogen production of g-C3N4-based photocatalyst were also highlighted. This chapter ends with the future research and challenges of hydrogen production over g-C3N4-based photocatalyst.

Synthesis of Template-Free Iron Oxyhydroxide Nanorods for Sunlight-Driven Photo-Fenton Catalysis

Designing a photocatalyst with high efficiency using semiconductor materials emerges as a promising approach for the treatment of wastewater. At the same time, it is very essential to develop nondestructive, green, and sustainable techniques for the degradation of refractory pollutants. Here, we have demonstrated a facile route to prepare iron oxyhydroxide nanorods (β-FeOOH) without employment of any templating agent via a light-driven solution chemistry pathway and explored the as-prepared nanorods as the photo-Fenton catalyst under solar light irradiation. The photocatalytic experiments were performed toward the degradation of the aqueous solution of two different pollutants, namely, methylene blue and rhodamine B dyes. We have illustrated the effect of pH of the solution together with the concentration of H₂O₂ during the degradation process and optimized the solution pH as well as the H₂O₂ concentration. The superb photocatalytic efficiency of β-FeOOH is attributed to the generation of reactive oxygen species in the presence of solar light, and these photo-produced reactive oxygen species assist the degradation process. The excellent photocatalytic efficacy and sustainability of β-FeOOH nanorods along with their effortless synthesis approach point to a cost-effective and environmentally benign pathway in fabricating a highly active photocatalyst for the degradation of organic dyes.

Zr-MOFs Integrated with a Guest Capturer and a Photosensitizer for the Simultaneous Adsorption and Degradation of 4-Chlorophenol

A bifunctional metal-organic framework (MOF) was successfully designed to realize the purification of 4-chlorophenol (4-CP) under simulated sunlight irradiation. Owing to the large-size mesopores of the MOF matrix NU-1000, β-CMCD (carboxylic β-cyclodextrin) could be incorporated into the frameworks with a density of 2.4% to pre-enrich the pollutant of 4-CP. Meanwhile, the photodegradation promoter [Pd(II) meso-tetra(4-carboxyphenyl)porphine] was in situ co-assembled with the organic ligand to realize its synchronous degradation. As for the current integrator, a Langmuir model was used to explain the adsorption isotherm, and the Langmuir-Hinshelwood model exhibited a better fit to its catalytic degradation behavior. Thanks to the simultaneous presence of a capturer and a photodegradation promoter, the adsorption capacity of 4-CP reached as high as 296 mg g^-1, which was further completely detoxified within 60 min under simulated sunlight irradiation with a half-life time of only 5.98 min. Such excellent integrated decontamination properties prefigure the great promising potential of multifunctional MOFs in the field of pollution purification.

Boosting photoresposive ability of WO3-Bi2O3nanocomposite rods via annealing-induced intrinsic precipitation of nanosized Bi particles

In this study, Bi-particle-functionalized tungsten trioxide-bismuth oxide (WO₃-Bi₂O₃) composite nanorods were prepared by integrating sputtering and hydrothermal syntheses with an appropriate postannealing procedure to induce Bi particle precipitation. Unlike other routes in which metal particle decoration is achieved externally, in this study, photoresponsive one-dimensional WO₃-Bi₂O₃composite nanorods were decorated with Bi particles by using the internal precipitation method. Structural analysis revealed that the Bi-metal-particle-functionalized WO₃-Bi₂O₃composite nanorods with particle size ranging from 5 to 10 nm were formed through hydrogen gas annealing at an optimal annealing temperature of 350 °C. Compared with the pristine WO₃nanorod template, the Bi-WO₃-Bi₂O₃composite nanorods exhibited higher photoresponsive performance, substantial photogenerated charge transfer ability, and efficient separation of photogenerated electron-hole pairs. The study results indicated that the Bi-WO₃-Bi₂O₃composite nanorods had superior decontamination ability and excellent stability toward RhB dye as compared with pristine WO₃. Moreover, the photogenerated charge separation and migration efficiencies of the WO₃-Bi₂O₃nanorods could be tuned through appropriate reduction of the surface oxide layer; this is a promising approach to designing WO₃-Bi₂O₃nanorods with high photoactive performance.

Copolymerization of urea and murexide for efficient photocatalytic hydrogen evolution and tetracycline degradation

A g-C₃N₄ based material modified with murexide has been prepared and used for photocatalytic hydrogen production and degradation of tetracycline.

Synthesis of highly crystalline LaFeO3 nanospheres for phenoxazinone synthase mimicking activity

LaFeO₃ nanospheres with an orthorhombic perovskite structure were synthesized by a sol–gel autocombustion method in the presence of different citric acid ratios (x = 2, 4, 8, and 16) and utilized for the photocatalytic conversion of o-aminophenol (OAP) to 2-aminophenoxazine-3-one (APX) for the first time. OAP is one of the most toxic phenolic derivatives used as a starting material in many industries; however, the dimerization product APX has diverse therapeutic properties. Photocatalytic conversion was carried out in ethanol/water and acetonitrile/water mixtures in the absence and presence of molecular oxygen at ambient temperature via the oxidative coupling reaction that mimics phenoxazinone synthase-like activity. The LaFeO₃ samples showed a superior photocatalytic activity of OAP to APX with rate constants of 0.43 and 0.92 min⁻¹ in the absence and presence of molecular oxygen, respectively. Thus, the LaFeO₃ nanozymes could be used as promising candidates in industrial water treatment and phenoxazinone synthase-like activity.

LaFeO₃ nanospheres were synthesized by a facile sol–gel autocombustion method and explored for the photocatalytic transformation of o-aminophenol to 2-aminophenoxazine-3-one.

Visible-light-driven photo-Fenton degradation of ceftriaxone sodium using SnS2/LaFeO3 composite photocatalysts

The LaFeO3-based heterostructure photocatalyst and photo-Fenton process are combined to effectively treat ceftriaxone sodium (CRS) contaminant under visible light.

Graphitic carbon nitride/SmFeO3 composite Z-scheme photocatalyst with high visible light activity

In this work, novel heterostructured photocatalysts associating graphitic carbon nitride (g-CN) and SmFeO₃ were prepared via a mixing-ultrasonication process. Structural, optical and morphological characterizations demonstrate that the interfacial junction between g-CN and SmFeO₃ is well established for all g-CN/SmFeO₃ composites prepared with g-CN:SmFeO₃ weight ratio of 20:80, 50:50 and 80:20. The g-CN/SmFeO₃ (80:20) composite exhibits the highest photocatalytic activity for the degradation of pollutants like the Orange II dye and the tetracycline hydrochloride antibiotic under visible light irradiation. This high photocatalytic activity originates from the enhanced light absorption over the whole visible region compared to pure g-CN and from the improved separation and transfer of photogenerated electron/hole pairs as demonstrated by photoluminescence and photocurrent measurements. A Z-scheme charge carrier transfer mechanism was demonstrated for the photocatalytic reactions. The g-CN/SmFeO₃ (80:20) catalyst was also demonstrated to be stable and can be reused up to six times without significant alteration of the activity.

Superior Adsorption and Photocatalytic Degradation Capability of Mesoporous LaFeO3/g-C3N4 for Removal of Oxytetracycline

Mesoporous LaFeO3/g-C3N4 Z-scheme heterojunctions (LFC) were synthesized via the incorporation of LaFeO3 nanoparticles and porous g-C3N4 ultrathin nanosheets. The as prepared LFC were characterized by transmission electron microscopy, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, powder X-ray diffraction, Raman spectra and N2 adsorption analysis. The structural analysis indicated that the reheating process and the addition of NH4Cl in the thermal polymerization were the key factors to get porous g-C3N4 ultrathin nanosheets and to obtain high specific surface areas of LFC. It remarkably enhanced the adsorption capacity and photocatalytic degradation of LFC for removal of oxytetracycline (OTC). The effect of the mass percentage of LaFeO3 in LFC, pH and temperature on the OTC adsorption was investigated. The LaFeO3/g-C3N4 heterojunction with 2 wt % LaFeO3 (2-LFC) exhibited highest saturated adsorption capacity (101.67 mg g−1) and largest photocatalytic degradation rate constant (1.35 L g−1 min−1), which was about 9 and 5 times higher than that of bulk g-C3N4 (CN), respectively. This work provided a facile method to prepare mesoporous LaFeO3/g-C3N4 heterojunctions with especially well adsorption and photocatalytic activities for OTC, which can facilitate its practical applications in pollution control.