Mono-, bi- and tri-metallic Fe-based platinum group metal-free electrocatalysts derived from phthalocyanine for oxygen reduction reaction in alkaline media

In this manuscript, a comprehensive study is presented on Fe-based electrocatalysts with mono, bi, and tri-metallic compositions, emphasizing the influence of processing-structure correlations on the electrocatalytic activity for the oxygen reduction reaction (ORR) in the alkaline medium. These electrocatalysts were synthesized through the mixing of transition metal phthalocyanines (TM-Pc) with conductive carbon support, followed by controlled thermal treatment at specific temperatures (600 °C and 900 °C). An extensive analysis was conducted, employing various techniques, including X-ray Absorption Spectroscopy (XAS), Transmission Electron Microscopy (TEM), and X-ray Diffraction (XRD), providing valuable insights into the structural characteristics of the synthesized nanoparticles. Importantly, an increase in the Fe-Pc weight percentage from 10% to 30% enhanced the ORR activity, although not proportionally. Furthermore, a comparative analysis between mono, bi, and tri-metallic samples subjected to different functionalization temperatures highlighted the superior electrocatalytic activity of electrocatalysts functionalized at 600 °C, particularly Fe 600 and Fe-Ni-Cu 600. These electrocatalysts featured Eon values of 0.96 V vs. RHE and E1/2 values of 0.9 V vs. RHE, with the added benefit of reduced anionic peroxide production. The potential of these Fe-based electrocatalysts to enhance ORR efficiency is underscored by this research, contributing to the development of more effective and sustainable electrocatalysts for energy conversion technologies.

Zinc- Fe/Fe5C2/Fe1-xS@Fe-N-C active sites grown on N-doped porous carbon toward efficient oxygen reduction reaction in zinc-air batteries

The development of efficient non-precious metal oxygen reduction reaction catalysts to replace Pt-based catalysts is of great significance to accelerate the commercial application of fuel cells. In this study, a hierarchical porous carbon oxygen reduction reaction catalyst with Fe/Fe₅C₂/Fe_1-xS@Fe-N-C active sites was developed via a simple and efficient solid-phase synthesis method. The introduction of zinc inhibited the growth and agglomeration of the nanoparticles and induced the formation of active nitrogen species and porosity, thus boosting the catalytic activity. The optimal FeZn-N-C-1 catalyst exhibited a high half-wave potential of 0.846 V, which is 24 mV higher than that of the commercial Pt/C, with a 4-e^- reaction path under alkaline conditions. When the FeZn-N-C-1 catalyst is employed as a cathode in a zinc-air battery, it achieves a high open circuit voltage of 1.54 V, power density of 143.6 mW cm^-2 and specific capacity of 804 mA h g^-1.

Two-Phase Synthesis of Fe Doped Cerium Phosphate Ultra-fine Nanocrystals for Efficient Oxygen Evolution

It is very important and challenging to develop electrocatalysts with high performance and economic benefits. In this work, ultra-fine Fe doped CePO4 nanocrystals (Fe-CePO4) were prepared by a simple two-step...

MOF@COF Heterostructure Hybrid for Dual-Mode Photoelectrochemical-Electrochemical HIV-1 DNA Sensing

We developed a novel metal-organic framework (MOF)@covalent-organic framework (COF) hybrid with a hierarchical nanostructure and excellent photoactivity, which further acted as the bifunctional platform of a dual-mode photoelectrochemical (PEC) and electrochemical (EC) biosensor for detecting HIV-1 DNA via immobilizing the HIV-1 DNA probe. First, the presynthesized Cu-MOF nanoellipsoids were used as the template for the in situ growth of the COF network, which was synthesized using copper-phthalocyanine tetra-amine (CoPc-TA) and 2,9-bis[p-(formyl)phenyl]-1,10-phenanthroline as building blocks through the Schiff base condensation. In view of the large specific surface area, abundant reserved amino group, excellent electrochemical activity, and high photoactivity, the obtained Cu-MOF@CuPc-TA-COF heterostructure not only can serve as the sensitive platform for anchoring the HIV-1 DNA probe strands but also can be utilized as the signal transducers for PEC and EC biosensors. Thereby, the constructed biosensor shows the sensitive and selective analysis ability toward the HIV-1 target DNA via the complementary hybridization between probe and target DNA strands. The dual-mode PEC and EC measurements revealed that the Cu-MOF@CuPc-TA-COF-based biosensor displayed a wide linear detection range from 1 fM to 1 nM and an extremely low limit of detection (LOD) of 0.07 and 0.18 fM, respectively. In addition, the dual-mode PEC-EC biosensor also demonstrated remarkable selectivity, high stability, good reproducibility, and preferable regeneration ability, as well as acceptable applicability, for which the detected HIV-1 DNA in human serum showed good consistency with real concentrations. Thereby, the present work can open a new dual-mode PEC-EC platform for detecting HIV-1 DNA based on the porous-organic framework heterostructure.

Bifunctional Oxygen Electrocatalysis on Mixed Metal Phthalocyanine-Modified Carbon Nanotubes Prepared via Pyrolysis

Non-precious-metal catalysts are promising alternatives for Pt-based cathode materials in low-temperature fuel cells, which is of great environmental importance. Here, we have investigated the bifunctional electrocatalytic activity toward the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) of mixed metal (FeNi; FeMn; FeCo) phthalocyanine-modified multiwalled carbon nanotubes (MWCNTs) prepared by a simple pyrolysis method. Among the bimetallic catalysts containing nitrogen derived from corresponding metal phthalocyanines, we report the excellent ORR activity of FeCoN-MWCNT and FeMnN-MWCNT catalysts with the ORR onset potential of 0.93 V and FeNiN-MWCNT catalyst for the OER having EOER = 1.58 V at 10 mA cm-2. The surface morphology, structure, and elemental composition of the prepared catalysts were examined with scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The FeCoN-MWCNT and FeMnN-MWCNT catalysts were prepared as cathodes and tested in anion-exchange membrane fuel cells (AEMFCs). Both catalysts displayed remarkable AEMFC performance with a peak power density as high as 692 mW cm-2 for FeCoN-MWCNT.

Metal-organic framework derived ultralow-loading platinum-copper catalyst: a highly active and durable bifunctional electrocatalyst for oxygen-reduction and evolution reactions

Electrocatalysts with high active oxygen reduction (ORR) and oxygen evolution reaction (OER) activities are key factors in renewable energy technologies. Unlike common strategies for adjusting the proportion of metal centers in a multi-metal organic framework (MOF), herein, we designed and synthesized bifunctional electrocatalysts using cetyltrimethylammonium bromide (CTAB)-capped ultra-low content platinum (Pt) (≤0.5 wt.% Pt) and copper (Cu) nanoparticles and doped on the surface of zinc-based MOF (Zn-MOF-74) and calcinated at 900 °C. According to the electrochemical activity, the Pt/Cu/NPC-900 exhibits superior catalytic activities towards both the ORR with the onset (E₀) and half-wave (E_1/2) potentials were 1.0 V and 0.89 V versus RHE, respectively, and OER (E_o = 1.48 V versus RHE and overpotential (η) = 0.265 V versus RHE) in an alkaline electrolyte at ambient temperature. Also, Pt/Cu/NPC-900 catalyzes through a 4^-electron process and exhibits superior stability. Such insightful findings, as well as a newly developed approach, provides rational design and synthesis of an economical and efficient strategy for bifunctional electrocatalyst development.

In situ synthesis of highly dispersed Co–N–C catalysts with carbon-coated sandwich structures based on defect anchoring

Highly dispersed Co–N–C catalysts were prepared via a defect strategy to anchor metal atoms with a carbon coating and were applied for the selective oxidation of ethylbenzene.

Dual potassium salt-assisted lyophilization of natural fibres for the high-yield synthesis of one-dimensional carbon microtubes for supercapacitors and the oxygen reduction reaction

Natural fibre-derived carbon microtubes exhibit excellent performances as supercapacitor electrodes and oxygen reduction electrocatalysts via dual-potassium-salt-assisted freeze-drying and post-nitrogen doping.

Transition metal mixed oxide-embedded graphene oxide bilayers as an efficient electrocatalyst for optimizing hydrogen evolution reaction in alkaline media

A novel electrocatalyst containing different percentages of iron-titanium mixed oxide onto graphene oxide (GO) support was prepared by embedding via the thermal decomposition method (TD) and was coated on a Cu substrate through facile electroless Ni–Co–P plating.