Cellulose acetate-based electrospun nanofiber aerogel with excellent resilience and hydrophobicity for efficient removal of drug residues and oil contaminations from wastewater

Cellulose acetate (CA)-based electrospun nanofiber aerogel (ENA) has drawn extensive attention for wastewater remediation due to its unique separation, inherent porosity and biodegradability. However, the low mechanical strength, poor durability, and limited adsorption ability hinder its further applications. We herein propose using silane-modified ENA, namely T-CA@Si@ZIF-67 (T-ENA), with enhanced resilience, hydrophobicity, durability and hetero-catalysis to remediate a complex wastewater containing oil and drug residues. The robust T-ENA was fabricated by pre-doping tetraethyl orthosilicate (TEOS) and ligand in its spinning precursors, followed by in-situ anchoring of porous ZIF-67 on the electrospun nanofibers (ENFs) via seeding method before freeze-drying and thermal curing (T). Results show that the T-ENA displays enhanced mechanical stability/resilience and hydrophobicity without compromise of its high porosity (>98 %) and low density (10 mg/cm3) due to the silane cross-linking. As a result, the hydrophobic T-ENA shows over 99 % separation efficiency towards different oil-water solutions. Meanwhile, thanks to the enhanced adsorption-catalytic ability and the activation of peroxymonosulfate (PMS) from the porous ZIF-67, fast degradation of carbamazepine (CBZ) residue in the wastewater can be achieved within 20 min. This work might provide a novel strategy for developing CA aerogels to remove organic pollutants.

Facilely Direct Construction, White-Light Emission, and Color-Adjustable Luminescence of LaF3 :Pr3+ @SiO2 Yolk-Shell Nanospheres with Moisture Resistance

Poor water stability and single luminous color are the major drawbacks of the most phosphors reported. Therefore, it is important to realize multicolor luminescence in a phosphor with single host and single activator as well as moisture resistance. LaF3 :Pr3+ @SiO2 yolk-shell nanospheres are facilely obtained by a designing new technology of a simple and cost-effective electrospray ionization combined with a dicrucible fluorating technique without using protective gas. In addition, tunable photoluminescence, especially white-light emission, is successfully obtained in LaF3 :Pr3+ @SiO2 yolk-shell nanospheres by adjusting Pr3+ ion concentrations, and the luminescence mechanism of Pr3+ ion is advanced. Compared with the counterpart LaF3 :Pr3+ nanospheres, the water stability of LaF3 :Pr3+ @SiO2 yolk-shell nanospheres is improved by 15% after immersion in water for 72 h, and the fluorescence intensity can be maintained at 86% of the initial intensity. Furthermore, by treating the yolk-shell nanospheres with hydrofluoric acid, it is not only demonstrated that the shell-layer is SiO2 but also core-LaF3 :Pr3+ nanospheres are obtained. Particularly, only fluorination procedure among the halogenation can produce such special yolk-shell nanospheres, the formation mechanism of yolk-shell nanospheres is proposed detailedly based on the sound experiments and a corresponding new technology is built. These findings broaden practical applications of LaF3 :Pr3+ @SiO2 yolk-shell nanospheres.

Amorphous Co@TiO2 heterojunctions: A high-performance and stable catalyst for the efficient degradation of sulfamethazine via peroxymonosulfate activation

Persulfate-based advanced oxidation processes (AOPs) cannot easily achieve the efficient degradation of persistent organic pollutants (POPs) with high stability. In this study, a simple in situ precipitation method was used to prepare an amorphous Co@TiO₂ heterojunction catalyst. The deposition of Co oxide on TiO₂, which is relatively nontoxic, efficiently activated peroxymonosulfate (PMS) to degrade sulfamethazine (SMT) and reduce the leaching of Co ions (0.915%). A catalytic system prepared using 0.3 g L^-1 Co@TiO₂ and 0.5 g L^-1 PMS could degrade SMT within 30 min with a degradation rate of 95.8%. Co@TiO₂ could activate PMS over a wide pH range (5.00-9.00) to efficiently degrade other antibiotics and dyes. Radical-capture experiments and electron paramagnetic resonance analysis suggested that SMT degradation occurs through a combination of the free radical and non-radical pathways, in which singlet ¹O₂ played a major role. Owing to the novelty of the proposed composite materials, the degradation path of SMT, which was determined through liquid chromatography-mass spectrometry, differed from that reported previously. This study provides not only an advanced and renewable catalyst for SMT degradation but also a feasible strategy for designing materials for AOPs.

Rigid, eco-friendly and superhydrophobic SiO2-Polyvinyl alcohol composite sponge for durable oil remediation

Development of durable and eco-friendly adsorbents for oil remediation is in great demands. However, most of adsorbents were designed to pursue large capabilities while ignored their strength after adsorbing oil, which might cause secondary oil spilling during complex salvage process. Herein, an eco-friendly and superhydrophobic SiO₂-modified polyvinyl alcohol composite (H-SiO₂-G-PVA) sponge with extraordinary rigid structure after oil adsorption is designed for durable oil remediation. Through a two-step hydrolysis-condensation process including deposition of silica microparticles and introduction of hexadecyltrimethoxysilane (HDTMS), a superhydrophobic H-SiO₂-G-PVA sponge has been successfully constructed. The sponge presents stable superhydrophobicity in various complex environments，therefore it efficiently adsorbs oil from water (up to 6 g g^-1) and separate surfactant-stabilized water/oil emulsion with high efficiency (>99%). Noticeably, the H-SiO₂-G-PVA sponge maintains tough strength (3.5 MPa) after oil adsorption, which ideally overcomes secondary oil spilling problem and endows the sponge with excellent recycling performances (>20 cycles). Meanwhile, the excellent biocompatibility of the sponge (high cell viability of 91.85%) ensures the potential for practical applications. This rigid, eco-friendly oil-adsorbing sponge that achieves stable superhydrophobicity and recyclability, fulfills the application needs for durable oil remediation.

Nanoarchitectured prototypes of mesoporous silica nanoparticles for innovative biomedical applications

Despite exceptional morphological and physicochemical attributes, mesoporous silica nanoparticles (MSNs) are often employed as carriers or vectors. Moreover, these conventional MSNs often suffer from various limitations in biomedicine, such as reduced drug encapsulation efficacy, deprived compatibility, and poor degradability, resulting in poor therapeutic outcomes. To address these limitations, several modifications have been corroborated to fabricating hierarchically-engineered MSNs in terms of tuning the pore sizes, modifying the surfaces, and engineering of siliceous networks. Interestingly, the further advancements of engineered MSNs lead to the generation of highly complex and nature-mimicking structures, such as Janus-type, multi-podal, and flower-like architectures, as well as streamlined tadpole-like nanomotors. In this review, we present explicit discussions relevant to these advanced hierarchical architectures in different fields of biomedicine, including drug delivery, bioimaging, tissue engineering, and miscellaneous applications, such as photoluminescence, artificial enzymes, peptide enrichment, DNA detection, and biosensing, among others. Initially, we give a brief overview of diverse, innovative stimuli-responsive (pH, light, ultrasound, and thermos)- and targeted drug delivery strategies, along with discussions on recent advancements in cancer immune therapy and applicability of advanced MSNs in other ailments related to cardiac, vascular, and nervous systems, as well as diabetes. Then, we provide initiatives taken so far in clinical translation of various silica-based materials and their scope towards clinical translation. Finally, we summarize the review with interesting perspectives on lessons learned in exploring the biomedical applications of advanced MSNs and further requirements to be explored.

Hairy silica nanosphere supported metal nanoparticles for reductive degradation of dye pollutants

Hairy materials can act as a sort of scaffold for the fabrication of functional hybrid composites. In this work, silica nanospheres modified with covalently grafted poly(4-vinylpyridine) (P4VP) brushes, namely, "hairy" silica spheres, were utilized as a support for the anchorage of metal nanoparticles (MNPs), thus resulting in the hierarchical SiO₂@P4VP/MNP structure. In this triple-phase boundary heteronanostructure, the SiO₂-supported MNPs are well stabilized by the P4VP matrix to avoid aggregation and leaching. These SiO₂@P4VP/MNP nanocomposites exhibit good catalytic activity in the reductive degradation of organic dyes, i.e., 4-nitrophenol and rhodamine B and possess excellent stability and recyclability for five successive cycles.