Engineered Sustainable Omniphobic Coatings to Control Liquid Spreading on Food-Contact Materials

The adhesion of sticky liquid foods to a contacting surface can cause many technical challenges. The food manufacturing sector is confronted with many critical issues that can be overcome with long-lasting and highly nonwettable coatings. Nanoengineered biomimetic surfaces with distinct wettability and tunable interfaces have elicited increasing interest for their potential use in addressing a broad variety of scientific and technological applications, such as antifogging, anti-icing, antifouling, antiadhesion, and anticorrosion. Although a large number of nature-inspired surfaces have emerged, food-safe nonwetted surfaces are still in their infancy, and numerous structural design aspects remain unexplored. This Review summarizes the latest scientific research regarding the key principles, fabrication methods, and applications of three important categories of nonwettable surfaces: superhydrophobic, liquid-infused slippery, and re-entrant structured surfaces. The Review is particularly focused on new insights into the antiwetting mechanisms of these nanopatterned structures and discovering efficient platform methodologies to guide their rational design when in contact with food materials. A detailed description of the current opportunities, challenges, and future scale-up possibilities of these nanoengineered surfaces in the food industry is also provided.

Transferrable Electrospinning Nanofiber Meshes as Strongly Adhered Scaffolds for Slippery Liquid-Infused Porous Surfaces

Slippery liquid-infused porous surfaces (SLIPS) are self-healing protective coatings that can be made by infiltration of a porous scaffold with a chemically resistant oil. A popular method to apply a SLIPS coating is using electrospinning to deposit a nanofiber mesh onto the intended substrate. However, electrospinning only lightly deposits the nanofibers onto the intended substrate, so the coating detaches easily even when unintended. We report a simple, yet effective, solution to the adhesion problem. Electrospun nanofiber meshes are typically well entangled and cohesive, so they can be detached from the electrospinning target and transferred onto the final target. Using a thin layer of adhesive on the intended surface, the electrospinning mesh can be securely attached and infiltrated with protective oil to yield a more stable SLIPS coating. An adhered coating can be submerged under corrosive solution and repeatedly self-heal from damage to the same spot. With the electrospun nanofiber meshes' flexibility and stretchability, the meshes can be fitted around a wide range of targets including ones that are otherwise difficult to apply a nanofiber mesh on. The use of an adhesive interlayer between the nanofiber mesh and substrate is a simple solution to improve coating stability, and the solution facilitates application of SLIPS onto a broader range of substrates.

Design of Metal-Based Slippery Liquid-Infused Porous Surfaces (SLIPSs) with Effective Liquid Repellency Achieved with a Femtosecond Laser

Slippery liquid-infused porous surfaces (SLIPSs) have become an effective method to provide materials with sliding performance and, thus, achieve liquid repellency, through the process of infusing lubricants into the microstructure of the surface. However, the construction of microstructures on high-strength metals is still a significant challenge. Herein, we used a femtosecond laser with a temporally shaped Bessel beam to process NiTi alloy, and created uniform porous structures with a microhole diameter of around 4 µm, in order to store and lock lubricant. In addition, as the lubricant is an important factor that can influence the sliding properties, five different lubricants were selected to prepare the SLIPSs, and were further compared in terms of their sliding behavior. The temperature cycle test and the hydraulic pressure test were implemented to characterize the durability of the samples, and different liquids were used to investigate the possible failure under complex fluid conditions. In general, the prepared SLIPSs exhibited superior liquid repellency. We believe that, in combination with a femtosecond laser, slippery liquid-infused porous surfaces are promising for applications in a wide range of areas.

A comparison between superhydrophobic surfaces (SHS) and slippery liquid-infused porous surfaces (SLIPS) in application

Slippery liquid-infused porous surfaces inspired by the Nepenthes pitcher plant exhibit excellent performances and are known for their extremely low contact angle hysteresis (<5°) and smooth surface. In contrast, superhydrophobic surfaces (SHS) exhibit poor pressure stability, difficulty in self-healing, and difficulty in removing low surface tension liquids or organic solvents, which can affect the stable air layer. Thus, these issues can be avoided through the replacement of SHS with slippery liquid infused porous surfaces (SLIPS). In this review, the theoretical models of SHS and SLIPS are classified initially, and several design standards for the preparation of SLIPS are briefly described. Then, we focus on comparing the differences in the application of SHS and SLIPS, such as pressure stability, transparency, and droplet manipulation. However, there are still some problems that need to be improved during the preparation of SLIPS, such as the evaporation of the lubricant layer, the use of a lubricant layer of toxic perfluoropolyether and other substances, and easily lost nanostructured lubricant layer. Accordingly, several new improved methods are proposed in this review, and finally, the potential applications and development prospects of SLIPS are presented.