Metallic 1T-phase MoS2 quantum dots/g-C3N4 heterojunctions for enhanced photocatalytic hydrogen evolution

Tailoring functional two-dimensional nanohybrids: A comprehensive approach for enhancing photocatalytic remediation

Photocatalysis is gaining prominence as a viable alternative to conventional biohazard treatment technologies. Two-dimensional (2D) nanomaterials have become crucial for fabricating novel photocatalysts due to their nanosheet architectures, large surface areas, and remarkable physicochemical properties. Furthermore, a variety of applications are possible with 2D nanomaterials, either in combination with other functional nanoparticles or by utilizing their inherent properties. Henceforth, the review commences its exploration into the synthesis of these materials, delving into their inherent properties and assessing their biocompatibility. Subsequently, an overview of mechanisms involved in the photocatalytic degradation of pollutants and the processes related to antimicrobial action is presented. As an integral part of our review, we conduct a systematic analysis of existing challenges and various types of 2D nanohybrid materials tailored for applications in the photocatalytic degradation of contaminants and the inactivation of pathogens through photocatalysis. This investigation will aid to contribute to the formulation of decision-making criteria and design principles for the next generation of 2D nanohybrid materials. Additionally, it is crucial to emphasize that further research is imperative for advancing our understanding of 2D nanohybrid materials.

Porous In2O3 Hollow Tube Infused with g-C3N4 for CO2 Photocatalytic Reduction

Converting CO2 into energy-rich fuels by using solar energy is a sustainable solution that promotes a carbon-neutral economy and mitigates our reliance on fossil fuels. However, affordable and efficient CO2 conversion remains an ongoing challenge. Here, we introduce polymeric g-C3N4 into the pores of a hollow In2O3 microtube. This architecture results in a compact and staggered arrangement between g-C3N4 and In2O3 components with an increased contact interface for improved charge separation. The hollow interior further contributes to strengthening light absorption. The resulting g-C3N4-In2O3 hollow tubes exhibit superior activity (274 μmol·g-1·h-1) toward CO2 to CO conversion in comparison with those of pure In2O3 and g-C3N4 (5.5 and 93.6 μmol·g-1·h-1, respectively), underlining the role of integrating g-C3N4 and In2O3 in this advanced system. This work offers a strategy for the advanced design and preparation of hollow heterostructures for optimizing CO2 adsorption and conversion by integrating inorganic and organic semiconductors.

A zeolitic imidazolate framework (ZIF-67) and graphitic carbon nitride (g-C3N4) composite based efficient electrocatalyst for overall water-splitting reaction

Designing of non-noble, cost-effective, sustainable catalysts for water splitting is essential for hydrogen production. In this research work, ZIF-67, g-C3N4, and their composite (1, 3, 5, 6, 8 wt% g-C3N4@ZIF-67) are synthesized, and various techniques, XRD, FTIR, SEM, EDX and BET are used to examine their morphological properties for electrochemical water-splitting. The linkage of ZIF-67 with g-C3N4 synergistically improves the electrochemical kinetics. An appropriate integration of g-C3N4 in ZIF-67 MOF improves the charge transfer between the electrode and electrolyte and makes it a suitable option for electrochemical applications. In alkaline media, the composite of ZIF-67 MOF with g-C3N4 over a Ni-foam exhibits a superior catalyst activity for water splitting application. Significantly, the 3 wt% g-C3N4@ZIF67 composite material reveals remarkable results with low overpotential values of -176 mV@10 mA cm-2, 152 mV@10 mA cm-2 for HER and OER. The catalyst remained stable for 24 h without distortion. The 3 wt% composite also shows a commendable performance for overall water-splitting with a voltage yield of 1.34 v@10 mA cm-2. The low contact angle (54.4°) proves the electrocatalyst's hydrophilic nature. The results of electrochemical water splitting illustrated that 3 wt% g-C3N4@ZIF-67 is an electrically conductive, stable, and hydrophilic-nature catalyst and is suggested to be a promising candidate for electrochemical water-splitting application.

Hydrothermal Synthesis of MoS2/SnS2 Photocatalysts with Heterogeneous Structures Enhances Photocatalytic Activity

The use of solar photocatalysts to degrade organic pollutants is not only the most promising and efficient strategy to solve pollution problems today but also helps to alleviate the energy crisis. In this work, MoS₂/SnS₂ heterogeneous structure catalysts were prepared by a facile hydrothermal method, and the microstructures and morphologies of these catalysts were investigated using XRD, SEM, TEM, BET, XPS and EIS. Eventually, the optimal synthesis conditions of the catalysts were obtained as 180 °C for 14 h, with the molar ratio of molybdenum to tin atoms being 2:1 and the acidity and alkalinity of the solution adjusted by hydrochloric acid. TEM images of the composite catalysts synthesized under these conditions clearly show that the lamellar SnS₂ grows on the surface of MoS₂ at a smaller size; high-resolution TEM images show lattice stripe distances of 0.68 nm and 0.30 nm for the (002) plane of MoS₂ and the (100) plane of SnS₂, respectively. Thus, in terms of microstructure, it is confirmed that the MoS₂ and SnS₂ in the composite catalyst form a tight heterogeneous structure. The degradation efficiency of the best composite catalyst for methylene blue (MB) was 83.0%, which was 8.3 times higher than that of pure MoS₂ and 16.6 times higher than that of pure SnS₂. After four cycles, the degradation efficiency of the catalyst was 74.7%, indicating a relatively stable catalytic performance. The increase in activity could be attributed to the improved visible light absorption, the increase in active sites introduced at the exposed edges of MoS₂ nanoparticles and the construction of heterojunctions opening up photogenerated carrier transfer pathways and effective charge separation and transfer. This unique heterostructure photocatalyst not only has excellent photocatalytic performance but also has good cycling stability, which provides a simple, convenient and low-cost method for the photocatalytic degradation of organic pollutants.

The Collision between g-C3 N4 and QDs in the Fields of Energy and Environment: Synergistic Effects for Efficient Photocatalysis

Recently, graphitic carbon nitride (g-C₃ N₄ ) has attracted increasing interest due to its visible light absorption, suitable energy band structure, and excellent stability. However, low specific surface area, finite visible light response range (<460 nm), and rapid photogenerated electron-hole (e^- -h⁺ ) pairs recombination of the pristine g-C₃ N₄ limit its practical applications. The small size of quantum dots (QDs) endows the properties of abundant active sites, wide absorption spectrum, and adjustable bandgap, but inevitable aggregation. Studies have confirmed that the integration of g-C₃ N₄ and QDs not only overcomes these limitations of individual component, but also successfully inherits each advantage. Encouraged by these advantages, the synthetic strategies and the fundamental of QDs/g-C₃ N₄ composites are briefly elaborated in this review. Particularly, the synergistic effects of QDs/g-C₃ N₄ composites are analyzed comprehensively, including the enhancement of the photocatalytic performance and the avoidance of aggregation. Then, the photocatalytic applications of QDs/g-C₃ N₄ composites in the fields of environment and energy are described and further combined with DFT calculation to further reveal the reaction mechanisms. Moreover, the stability and reusability of QDs/g-C₃ N₄ composites are analyzed. Finally, the future development of these composites and the solution of existing problems are prospected.

MoS2 as a Co-Catalyst for Photocatalytic Hydrogen Production: A Mini Review

Molybdenum disulfide (MoS₂), with a two-dimensional (2D) structure, has attracted huge research interest due to its unique electrical, optical, and physicochemical properties. MoS₂ has been used as a co-catalyst for the synthesis of novel heterojunction composites with enhanced photocatalytic hydrogen production under solar light irradiation. In this review, we briefly highlight the atomic-scale structure of MoS₂ nanosheets. The top-down and bottom-up synthetic methods of MoS₂ nanosheets are described. Additionally, we discuss the formation of MoS₂ heterostructures with titanium dioxide (TiO₂), graphitic carbon nitride (g-C₃N₄), and other semiconductors and co-catalysts for enhanced photocatalytic hydrogen generation. This review addresses the challenges and future perspectives for enhancing solar hydrogen production performance in heterojunction materials using MoS₂ as a co-catalyst.

Enhanced photocatalytic degradation of paraben preservative over designed g-C3N4/BiVO4 S-scheme system and toxicity assessment

Paraben preservatives have been listed as emerging pollutants due to their ubiquity in various environmental matrices, especially the water bodies. How to efficiently and practically eliminate these paraben pollutants is therefore of great importance. Herein, a designed S-scheme heterojunction photocatalyst, consisting of graphitic carbon nitride (g-C₃N₄) and monoclinic bismuth vanadate (BiVO₄), was fabricated by a facile hydrothermal synthesis and employed to treat benzyl-paraben (BzP). TEM and XPS analysis testified the intimate interaction between g-C₃N₄ and BiVO₄, and the consequently smoothed interfacial charge transfer rendered the feasible recombination of the photoexcited electrons (from BiVO₄) and holes (from g-C₃N₄). The as-established S-scheme system enabled the left g-C₃N₄ electrons and BiVO₄ holes to maintain the high redox abilities and accelerated the charge separation concurrently. In particular, the g-C₃N₄/BiVO₄ composite generated much higher photocurrent response as compared with pure g-C₃N₄ and BiVO₄, highlighting the improved separation of photoinduced charges. Therefore, under visible light and natural solar light irradiation, the g-C₃N₄/BiVO₄ composite showed the significantly enhanced photocatalytic degradation of BzP, which was further optimized with 5 wt% g-C₃N₄ in the composite. According to the Mott-Schottky plots and identified active species, the mechanism of the g-C₃N₄/BiVO₄ S-scheme heterojunction system was illustrated. In addition, during the photocatalytic degradation process, the acute toxicity of the reaction solutions on zebrafish embryos was notably reduced. In conclusion, the demonstrated strategy to enhance the photocatalytic performance by designing S-scheme heterostructure may provide more insights into the development of high-efficiency photocatalyst towards the solar energy utilization and environmental treatment. Furthermore, photocatalytic degradation had been proved to be an efficient method for eliminating the ecological risk of paraben pollutants, warranting more attention in future work.

Sensitive and direct electrochemical detection of bisphenol S based on 1T&2H-MoS2/CNTs-NH2 nanocomposites

A voltammetric sensor was constructed for ultra-trace BPS detection based on the signal amplification effect of 1T&2H-MoS2 and CNTs-NH2 composites.

Enhanced photocatalytic driven hydroxylation of phenylboric acid to phenol over pyrenetetrasulfonic acid intercalated ZnAl-LDHs

Layered double hydroxides (LDHs) own admirable potential due to their controllable composition and exchangeable interlayer anions. Herein, pyrenetetrasulfonic acid (PTS) intercalated ZnAl-LDHs (denoted as ZnAl-xPTS, x represents the amount of NaPTS in the starting material) are synthesized by a co-precipitation method, which display enhanced photocatalytic activity towards the hydroxylation of phenylboric acid to phenol. Various characterizations suggest that PTS plays significant roles in improving the photocatalytic activity: (1) PTS extends the light absorption from ultraviolet to visible light region; (2) the introduction of PTS upshifts the conduction band, which is feasible for the formation of O₂^∙-; (3) ZnAl-xPTS produces more free electrons under light irradiation, which leads to greatly improved activity. This study develops an alternative LDHs based photocatalyst for the production of phenol, which also provides an efficient strategy to improve the photocatalytic activity of LDHs.

Engineering a NiAl-LDH/CoSx S-Scheme heterojunction for enhanced photocatalytic hydrogen evolution

The use of semiconductors to construct heterojunctions to suppress the rapid recombination of photogenerated charges and holes is considered to be an effective way to improve the efficiency of photocatalytic hydrogen evolution. Herein, cobalt sulfide (CoS_x) nanoparticles are cultivated in situ in the folds of three-dimensional flower-like nickel-aluminium layered double hydroxides (NiAl-LDHs) using a facile solvothermal method. The hydrogen production rate of the binary CoS_x/NiAl-LDH heterojunction reaches 3678.59 μmol/g/h, which is 83.74 and 22 times the rates of CoS_x and NiAl-LDH, respectively. The unique three-dimensional structure of NiAl-LDH facilitates the growth of CoS_x and shortens the transfer pathway of photogenerated electrons. More importantly, the built-in electric field formed at the interface and the S-type charge transport mechanism caused by the bending of the energy band enhance not only charge separation but also maintain the strong oxidation ability of the holes. In this study, the newly designed S-scheme heterojunction offers a new strategy for enhancing photocatalytic water splitting.

Molecular Self-Assembly of Oxygen Deep-Doped Ultrathin C3N4 with a Built-In Electric Field for Efficient Photocatalytic H2 Evolution

Heteroatom-doped carbon nitride (C₃N₄) with a built-in electric field can reinforce the carrier separation; however, the stability will be greatly reduced due to the loss of surface-doped atoms. Here, molecule self-assembly, as a facile bottom-up approach, is explored for the synthesis and oxygen doping of C₃N₄. The obtained C₃N₄ presents a porous and ultrathin structure and oxygen deep-doping, which generate abundant nitrogen vacancies and a stable built-in electric field. Toward photocatalytic hydrogen evolution, the ultrathin and oxygen deep-doped C₃N₄ exhibits a 3.5-fold higher activity than bulk C₃N₄ under simulated sunlight, and 3.6 times higher stability than the oxygen surface-doped counterpart within five cycles. Femtosecond transient absorption spectroscopy indicates the improved carrier separation, and density functional theory (DFT) calculation reveals the promoted H₂O adsorption and activation under the built-in electric field, which contribute to the excellent photocatalytic performance of oxygen deep-doped ultrathin C₃N₄.

Electrochemiluminescent chiral discrimination with chiral Ag2S quantum dots/few-layer carbon nitride nanosheets

Well-dispersed chiral Ag₂S quantum dots (Ag₂S QDs) were facilely synthesized by using N-acetyl-L-cysteine (NALC) as the chiral ligand and loaded onto nanosheets of two-dimensional (2D) few-layer carbon nitride (C₃N₄). The resultant nanocomposite (Ag₂S QDs/few-layer C₃N₄) shows enhanced electrochemiluminescence (ECL) while maintaining the chirality of Ag₂S QDs, which can be used for the chiral discrimination of the enantiomers of tyrosine (Tyr). Due to the higher affinity of chiral Ag₂S QDs toward L-Tyr than toward its enantiomer, the ECL intensity of Ag₂S QDs/few-layer C₃N₄ is significantly decreased after its incubation with L-Tyr, and thus the Tyr enantiomers can be discriminated. The developed ECL chiral sensor exhibits high stability and reproducibility. The universality of the ECL chiral sensor for the discrimination of other chiral amino acids is also studied, and the results indicate that it can work only in the case of chiral aromatic amino acids.

Emerging Cocatalysts on g-C3 N4 for Photocatalytic Hydrogen Evolution

Over the past few decades, graphitic carbon nitride (g-C₃ N₄ ) has arisen much attention as a promising candidate for photocatalytic hydrogen evolution reaction (HER) owing to its low cost and visible light response ability. However, the unsatisfied HER performance originated from the strong charge recombination of g-C₃ N₄ severely inhibits the further large-scale application of g-C₃ N₄ . In this case, the utilization of cocatalysts is a novel frontline in the g-C₃ N₄ -based photocatalytic systems due to the positive effects of cocatalysts on supressing charge carrier recombination, reducing the HER overpotential, and improving photocatalytic activity. This review summarizes some recent advances about the high-performance cocatalysts based on g-C₃ N₄ toward HER. Specifically, the functions, design principle, classification, modification strategies of cocatalysts, as well as their intrinsic mechanism for the enhanced photocatalytic HER activity are discussed here. Finally, the pivotal challenges and future developments of cocatalysts in the field of HER are further proposed.

Facile preparation of metallic 1T phase molybdenum selenide as cocatalyst coupled with graphitic carbon nitride for enhanced photocatalytic H2 production

Low-cost, highly active and efficient alternative co-catalysts that can replace precious metals such as Au and Pt are urgently needed for photocatalytic hydrogen evolution reaction (HER). Herein, we show that 1T phase MoSe₂ can act as the co-catalyst in the 1T-MoSe₂/g-C₃N₄ composites and we synthesize this composite by a one-step hydrothermal method to promote photocatalytic H₂ generation. Our prepared 1T-MoSe₂/g-C₃N₄ composite exhibits highly enhanced photocatalytic H₂ production compared to that of g-C₃N₄ nanosheets (NSs) only. The 7 wt%-1T-MoSe₂/g-C₃N₄ composite presents a considerably improved photocatalytic HER rate (6.95 mmol·h^-1·g^-1), approximately 90 times greater than that of pure g-C₃N₄ (0.07 mmol·h^-1 g^-1). Moreover, under illumination at λ = 370 nm, the apparent quantum efficiency (AQE) of the 7 wt%-1T-MoSe₂/g-C₃N₄ composite reaches 14.0%. Furthermore, the 1T-MoSe₂/g-C₃N₄ composites still maintain outstanding photocatalytic HER stability.

Construction 0D/2D heterojunction by highly dispersed Ag2S quantum dots (QDs) loaded on the g-C3N4 nanosheets for photocatalytic hydrogen evolution

In recent years, the use of quantum dots (QDs) cocatalysts to improve the hydrogen evolution activity from the water splitting of photocatalysts has become a popular research topic. Herein, we successfully prepared a novel 0 dimension/2 dimension (0D/2D) heterojunction nanocomposite (denoted Ag₂S quantum dots (QDs)/g-C₃N₄) with excellent photocatalytic performance by anchoring the Ag₂S QDs cocatalyst on the surface of g-C₃N₄ through a self-assembly strategy. Ag₂S QDs with an average particle size of approximately 5.8 nm were uniformly and tightly modified on g-C₃N₄. The Ag₂S QDs/g-C₃N₄ composite with 0.5 wt% Ag₂S QDs loading achieved the highest hydrogen evolution rate of 471.1 μmol·g^-1·h^-1 with an apparent quantum efficiency (AQE) of 1.48% at 405 nm. Such remarkable hydrogen evolution activity far exceeded that of undoped g-C₃N₄ and Ag₂S nanoparticles (NPs)/g-C₃N₄. Moreover, it was 2.04 times the activity of Pt/g-C₃N₄ with Pt as the cocatalyst. The enhanced photocatalytic performance was attributed to the energy band broadening of Ag₂S QDs caused by the quantum size effect and the convenient and effective charge transfer between g-C₃N₄ and Ag₂S QDs cocatalysts. The mechanism underlying the enhanced photocatalytic H₂ evolution activity was further proposed. This study demonstrates that semiconductor-based quantum dots are strong candidates for excellent cocatalysts in photocatalysis.

Engineering of g-C3N4-based photocatalysts to enhance hydrogen evolution

The technology of photocatalytic hydrogen production that converts abundant yet intermittent solar energy into an environmentally friendly alternative energy source is an attractive strategy to mitigate the energy crisis and environmental pollution. Graphitic carbon nitride (g-C₃N₄), as a promising photocatalyst, has gradually received focus in the field of artificial photosynthesis due to its appealing optical property, high chemical stability and easy synthesis. However, the limited light absorption and massive recombination of photoinduced carriers have hindered the photocatalytic activity of bare g-C₃N₄. Therefore, from the perspective of theoretical calculations and experiments, many valid approaches have been applied to rationally design the photocatalyst and ameliorate the hydrogen production performance, such as element doping, defect engineering, morphology tuning, and semiconductor coupling. This review summarized the latest progress of g-C₃N₄-based photocatalysts from two perspectives, modification of pristine g-C₃N₄ and interfacial engineering design. It is expected to offer feasible suggestions for the fabrication of low-cost and high-efficiency photocatalysts and the photocatalytic mechanism analyses assisted by calculation in the near future. Finally, the prospects and challenges of this exciting research field are discussed.

Recent developments in 2D transition metal dichalcogenides: phase transition and applications of the (quasi-)metallic phases

The advent of two-dimensional transition metal dichalcogenides (2D-TMDs) has led to an extensive amount of interest amongst scientists and engineers alike and an intensive amount of research has brought about major breakthroughs in the electronic and optical properties of 2D materials. This in turn has generated considerable interest in novel device applications. With the polymorphic structural features of 2D-TMDs, this class of materials can exhibit both semiconducting and metallic (quasi-metallic) properties in their respective phases. This polymorphic property further increases the interest in 2D-TMDs both in fundamental research and for their potential utilization in novel high-performance device applications. In this review, we highlight the unique structural properties of few-layer and monolayer TMDs in the metallic 1T- and quasi-metallic 1T'-phases, and how these phases dictate their electronic and optical properties. An overview of the semiconducting-to-(quasi)-metallic phase transition of 2D-TMD systems will be covered along with a discussion on the phase transition mechanisms. The current development in the applications of (quasi)-metallic 2D-TMDs will be presented ranging from high-performance electronic and optoelectronic devices to energy storage, catalysis, piezoelectric and thermoelectric devices, and topological insulator and neuromorphic computing applications. We conclude our review by highlighting the challenges confronting the utilization of TMD-based systems and projecting the future developmental trends with an outlook of the progress needed to propel this exciting field forward.

Phosphorous-doped 1T-MoS2 decorated nitrogen-doped g-C3N4 nanosheets for enhanced photocatalytic nitrogen fixation

Herein, we report that the phosphorous-doped 1 T-MoS₂ as co-catalyst decorated nitrogen-doped g-C₃N₄ nanosheets (P-1 T-MoS₂@N-g-C₃N₄) are prepared by the hydrothermal and annealing process. The obtained P-1 T-MoS₂@N-g-C₃N₄ composite presents an enhanced photocatalytic N₂ reduction rate of 689.76 μmol L^-1 g^-1h^-1 in deionized water without sacrificial agent under simulated sunlight irradiation, which is higher than that of pure g-C₃N₄ (265.62 μmol L^-1 g^-1h^-1), 1 T-MoS₂@g-C₃N₄ (415.57 μmol L^-1 g^-1h^-1), 1 T-MoS₂@N doped g-C₃N₄ (469.84 μmol L^-1 g^-1h^-1), and P doped 1 T-MoS₂@g-C₃N₄ (531.24 μmol L^-1 g^-1h^-1). In addition, compared with pure g-C₃N₄ NSs (2.64 mmol L^-1 g^-1h^-1), 1 T-MoS₂@g-C₃N₄ (4.98 mmol L^-1 g^-1h^-1), 1 T-MoS₂@N doped g-C₃N₄ (6.21 mmol L^-1 g^-1h^-1), and P doped 1 T-MoS₂@g-C₃N₄ (9.78 mmol L^-1 g^-1h^-1), P-1 T-MoS₂@N-g-C₃N₄ (11.12 mmol L^-1 g^-1h^-1) composite also shows a significant improvement for photocatalytic N₂ fixation efficiency in the sacrificial agent (methanol). The improved photocatalytic activity of P-1 T-MoS₂@N-g-C₃N₄ composite is ascribed to the following advantages: 1) Compared to pure g-C₃N₄, P-1 T-MoS₂@N-g-C₃N₄ composite shows higher light absorption capacity, which can improve the utilization rate of the catalyst to light; 2) The P doping intercalation strategy can promote the conversion of 1 T phase MoS₂, which in turn in favor of photogenerated electron transfer and reduce the recombination rate of carriers; 3) A large number of active sites on the edge of 1 T-MoS₂ and the existence of N doping in g-C₃N₄ contribute to photocatalytic N₂ fixation.

ZIF-67 derived Co@NC/g-C3N4 as a photocatalyst for enhanced water splitting H2 evolution

Graphitic carbon nitride (g-C₃N₄), as the one of the most promising photocatalysts, usually relies on noble metal co-catalysts in the photocatalytic water splitting H₂ evolution process, which greatly increases the use cost. Here, a zeolite imidazole framework (ZIF-67) derived Co@NC/g-C₃N₄ composite was constructed through facile thermal condensation of ZIF-67 and melamine. The obtained Co@NC/g-C₃N₄ composites can drive water splitting H₂ evolution without any noble metal co-catalyst under simulated sunlight. The optimal sample exhibits the highest H₂ evolution rate of 161 μmol g^-1·h^-1, which is 6 times of pure g-C₃N₄. The N doped carbon in carbonized ZIF-67 can not only quickly capture separated electrons from g-C₃N_4, but also serve as the co-catalyst. The well dispersed cobalt intermediate on carbonized ZIF-67 also play a role in promoting electron conversion. The formation of junction between carbonized ZIF-67 and g-C₃N₄ could promote quick charge carrier separation and transfer. This work provides a new idea for photocatalytic H₂ evolution without noble metal co-catalysis.

A novel electrochemiluminescence sensor based on resonance energy transfer from MoS2QDs@g-C3N4 to NH2-SiO2@PTCA for glutathione assay

In this work, a solid-state electrochemiluminescence (ECL) sensor based on resonance energy transfer (RET) was proposed using MoS2QDs@g-C3N4 as a donor and NH2-SiO2@PTCA as an acceptor. Herein, MoS2QDs could significantly facilitate the stability and efficiency of the ECL of g-C3N4. PTCA provided a large platform to anchor NH2-SiO2 nanoparticles. The prepared MoS2QDs@g-C3N4 exhibited good spectral overlap with the UV-vis absorption spectrum of NH2-SiO2@PTCA. Based on this, we designed an "off-on" ECL sensing strategy for sensitive and selective detection of glutathione (GSH). Under the best conditions, the linear range of the sensor for GSH detection was from 0.001 to 100 μM with a detection limit of 0.63 nM (S/N = 3). More importantly, GSH in commercial samples can be detected using the proposed sensor, which indicated its superior detection capabilities and potential application value in commercial medicines.

Rapid Charge Separation Boosts Solar Hydrogen Generation at the Graphene-MoS2 Junction: Time-Domain Ab Initio Analysis

Transition metal dichalcogenides and graphene hybrids hold great promise for photovoltaics and photocatalysts. Using a combination of time-domain density functional theory and nonadiabatic molecular dynamics, we investigate the interplay between forward and backward electron transfer (ET), as well as energy relaxation in a van der Waals graphene-MoS₂ heterojunction. We demonstrated that built-in potential formed at the polarized interface produces charge separation upon photoexcitation. The electron left on graphene is injected into MoS₂ on an ultrafast time scale, which is notably faster than energy losses to heat regardless of the initial state energy. Once the electron is relaxed to the conduction band edge state of MoS₂, it transfers back and recombines with the hole remaining on graphene on ultrafast time scales by considering quantum transitions among multiple k points. The obtained time scales for ET, back-ET, and energy relaxation agree well with experimental data. The study reveals that ET that is faster than energy loss makes the graphene-MoS₂ heterojunction efficient for optoelectronic applications.

Ultra-small molybdenum sulfide nanodot-coupled graphitic carbon nitride nanosheets: Trifunctional ammonium tetrathiomolybdate-assisted synthesis and high photocatalytic hydrogen evolution

The preparation of nanoscale molybdenum sulfide (MoS₂)-modified graphitic carbon nitride (g-C₃N₄) nanosheets usually contains complex and multiple-step operations, including the separate synthesis of nanoscale MoS₂ and g-C₃N₄ nanosheet, and their subsequent composite process. To effectively overcome the above drawbacks, herein, a facile one-step trifunctional ammonium tetrathiomolybdate ((NH₄)₂MoS₄)-assisted approach has been designed to produce ultra-small MoS_x nanodot-coupled g-C₃N₄ nanosheet photocatalyst, including the first addition of ammonium chloride (NH₄Cl) and (NH₄)₂MoS₄ into melamine precursors and their following one-step calcination. During high-temperature calcination, except for the promoting generation of the g-C₃N₄ nanosheets by produced ammonia (NH₃) and hydrogen sulfide (H₂S) gases, the above (NH₄)₂MoS₄ decomposition not only can efficiently clip the s-heptazine framework to produce more terminal amino groups and cyano groups, but also can produce ultra-small MoS_x nanodots on the resultant g-C₃N₄ nanosheet surface, resulting in the final production of ultra-small MoS_x nanodot-coupled g-C₃N₄ nanosheets. The resultant MoS_x nanodot-coupled g-C₃N₄ nanosheets evidently exhibit increased photocatalytic hydrogen (H₂)-generation rate, about 8-fold increase to the traditional MoS₂-modified g-C₃N₄ photocatalyst. The increased H₂-generation rate can be mainly attributed to the synergism of MoS_x nanodots and cyano group on the g-C₃N₄ nanosheet surface. The current facile technology could open the sights for the preparation of other high-efficiency photocatalysts.

Creation of carbon defects and in-plane holes with the assistance of NH4Br to enhance the photocatalytic activity of g-C3N4

A new holey defect-rich g-C₃N₄ photocatalyst from an NH₄Br-assisted programmed heating method exhibits an enhanced photocatalytic performance.

The enhanced photocatalytic performance of SnS2@MoS2 QDs with highly-efficient charge transfer and visible light utilization for selective reduction of mythlen-blue

Molybdenum disulfide (MoS₂) has recently been considered as an effective material for potential photocatalytic applications; however, its photocatalytic activity was limited due to the low density of active sites. In this work, MoS₂ Quantum dots (QDs) were synthesized via the ultrasonication technique to construct heterostructure with SnS₂ nanosheets (SnS₂@MoS₂ QDs) and the prepared materials were tested for photocatalytic applications for Methylene blue (MB). Pristine SnS₂ and SnS₂@MoS₂ QDs nanocomposite were analyzed by XRD, TEM, PL, and Uv-Vis. Both SnS₂ and SnS₂@MoS₂ QDs exhibited a single trigonal phase with the P-3m1 space group. The TEM analysis confirmed the coupling between the pristine SnS₂ and SnS₂@MoS₂ QDs. The results of photocatalytic activity toward MB indicated that SnS₂@MoS₂ QDs material exhibits much superior photocatalytic performance compared to pristine SnS₂. The excellent photodegradation performance of SnS₂@MoS₂ QDs is due in the main to the formation of heterojunction between SnS₂ and MoS₂ QDs with narrow bandgap formation, which results in a facile carriers transfer and thus high photocatalytic efficiency. A representative mechanism of the photodegradation for SnS₂@MoS₂ QDs photocatalyst was proposed. Such an ultrasonic technique is capable of producing small metallic particle size that can be used to construct new heterostructures for water remediation applications.

Cobalt and nitrogen codoped carbon nanotubes derived from a graphitic C3N4 template as an electrocatalyst for the oxygen reduction reaction

Sluggish oxygen reduction reaction kinetics have been a main obstacle for commercial application of fuel cells. To replace Pt-based noble metal electrocatalysts, it is crucial to develop economical materials as electrocatalysts. Herein, we provide a strategy to prepare Co and N codoped carbon nanotubes for efficient oxygen reduction reaction. The composites are synthesized by hydrothermal reaction followed by calcination at 900 °C. Graphitic carbon nitride is used as a template and nitrogen source, and citric acid and cobalt nitrate hexahydrate are used as carbon and cobalt sources, respectively. Due to the synergistic effect of Co and N codoping and increased specific surface area, the resulting Co and N codoped carbon nanotubes exhibit excellent catalytic performance. The present results provide experimental support for further development of electrocatalysts.

Recent progress of TMD nanomaterials: phase transitions and applications

Transition metal dichalcogenides (TMDs) show wide ranges of electronic properties ranging from semiconducting, semi-metallic to metallic due to their remarkable structural differences. To obtain 2D TMDs with specific properties, it is extremely important to develop particular strategies to obtain specific phase structures. Phase engineering is a traditional method to achieve transformation from one phase to another controllably. Control of such transformations enables the control of properties and access to a range of properties, otherwise inaccessible. Then extraordinary structural, electronic and optical properties lead to a broad range of potential applications. In this review, we introduce the various electronic properties of 2D TMDs and their polymorphs, and strategies and mechanisms for phase transitions, and phase transition kinetics. Moreover, the potential applications of 2D TMDs in energy storage and conversion, including electro/photocatalysts, batteries/supercapacitors and electronic devices, are also discussed. Finally, opportunities and challenges are highlighted. This review may further promote the development of TMD phase engineering and shed light on other two-dimensional materials of fundamental interest and with potential ranges of applications.