Heterostructured CoO-Co3O4 nanoparticles anchored on nitrogen-doped hollow carbon spheres as cathode catalysts for Li-O2 batteries

Interfacial Engineering of Co3 O4 /Fe2 O3 Nano-Heterostructure Toward Superior Li-O2 Batteries

A major issue with Li-O₂ batteries is their slow oxygen reduction and evolution kinetics, necessitating catalysts with high catalytic activity to improve reaction kinetics and cycle stability. Herein, a nano-heterostructured catalyst composed of Co₃ O₄ and Fe₂ O₃ (Co₃ O₄ /Fe₂ O₃ ) with a porous rod morphology is achieved through an interfacial engineering strategy by constructing Fe₂ O₃ on the Co₃ O₄ surface, which can function as a high-performance cathode in order to efficiently encourage the oxygen reduction and evolution while also reduce the battery polarization during charging and discharging. The density functional theory (DFT) calculations show the differences in charge density at the interface of nano-heterostructures, demonstrating the occurrence of an electron transfer process in the interface region of Co₃ O₄ and Fe₂ O₃ , implying a strong electronic coupling transfer, and in turn changing the electronic structure of the Co₃ O₄ . This significantly reduces the adsorption energy of LiO₂ intermediates, thereby effectively lowering the overpotential. The resultant Li-O₂ battery has larger discharge specific capacity, lower overpotential for the efficient oxygen evolution/reduction, as well as good cycling stability of 280 cycles. This work demonstrates an effective method to fabricate the nano-heterostrucutred materials with enhanced catalytic efficiency for advanced energy applications.

Controlled Oxidation of Cobalt Nanoparticles to Obtain Co/CoO/Co3O4 Composites with Different Co Content

The paper studies patterns of interaction of electroexplosive Co nanoparticles with air oxygen during heating. The characteristics of Co nanoparticles and composite Co/CoO/Co3O4 nanoparticles formed as a result of oxidation were studied using transmission electron microscopy, X-ray phase analysis, thermogravimetric analysis, differential scanning calorimetry, and vibrating sample magnetometry. It was established that nanoparticles with similar morphology in the form of hollow spheres with different content of Co, CoO, and Co3O4 can be produced by varying oxidation temperatures. The influence of the composition of composite nanoparticles on their magnetic characteristics is shown.

Nitrogen-doped carbon encapsulating RuCo heterostructure for enhanced electrocatalytic overall water splitting

The kinetically sluggish electrochemical water splitting reaction still faces great challenges, and the rational design of excellent electrocatalysts is the key to solving the problem. Herein, an etching and pyrolysis...

Oxygen Vacancy-Rich RuO2-Co3O4 Nanohybrids as Improved Electrocatalysts for Li-O2 Batteries

Lithium oxygen (Li-O₂) batteries have shown great potential as new energy-storage devices due to the high theoretical energy density. However, there are still substantial problems to be solved before practical application, including large overpotential, low energy efficiency, and poor cycle life. Herein, we have successfully synthesized a RuO₂-Co₃O₄ nanohybrid with a rich oxygen vacancy and large specific surface area. The Li-O₂ batteries based on the RuO₂-Co₃O₄ nanohybrid shown obviously reduced overpotential and improved circulatory property, which can cycle stably for more than 100 cycles at a current density of 200 mA g^-1. Experimental results and density function theory calculation prove that the introduction of RuO₂ can increase oxygen vacancy concentration of Co₃O₄ and accelerate the charge transfer. Meanwhile, the hollow and porous structure leads to a large specific surface area about 104.5 m² g^-1, exposing more active sites. Due to the synergistic effect, the catalyst of the RuO₂-Co₃O₄ nanohybrid can significantly reduce the adsorption energy of the LiO₂ intermediate, thereby reducing the overpotential effectively.

Crystal Phase-Controlled Modulation of Binary Transition Metal Oxides for Highly Reversible Li-O2 Batteries

Reducing charge-discharge overpotential of transition metal oxide catalysts can eventually enhance the cell efficiency and cycle life of Li-O₂ batteries. Here, we propose that crystal phase engineering of transition metal oxides could be an effective way to achieve the above purpose. We establish controllable crystal phase modulation of the binary Mn_xCo_1-xO by adopting a cation regulation strategy. Systematic studies reveal an unprecedented relevancy between charge overpotential and crystal phase of Mn_xCo_1-xO catalysts, whereas a dramatically reduced charge overpotential (0.48 V) via a rational optimization of Mn/Co molar ratio = 8/2 is achieved. Further computational studies indicate that the different morphologies of Li₂O₂ should be related to different electronic conductivity and binding of Li₂O₂ on crystal facets of Mn_xCo_1-xO catalysts, finally leading to different charge overpotential. We anticipate that this specific crystal phase engineering would offer good technical support for developing high-performance transition metal oxide catalysts for advanced Li-O₂ batteries.

Enhancing the Capacity and Stability by CoFe2O4 Modified g-C3N4 Composite for Lithium-Oxygen Batteries

As society progresses, the task of developing new green energy brooks no delay. Li-O₂ batteries have high theoretical capacity, but are difficult to put into practical use due to problems such as high overvoltage, low charge-discharge efficiency, poor rate, and cycle performance. The development of high-efficiency catalysts to effectively solve the shortcomings of Li-O₂ batteries is of great significance to finding a solution for energy problems. Herein, we design CoFe₂O₄/g-C₃N₄ composites, and combine the advantages of the g-C₃N₄ material with the spinel-type metal oxide material. The flaky structure of g-C₃N₄ accelerates the transportation of oxygen and lithium ions and inhibits the accumulation of CoFe₂O₄ particles. The CoFe₂O₄ materials accelerate the decomposition of Li₂O₂ and reduce electrode polarization in the charge–discharge reaction. When CoFe₂O₄/g-C₃N₄ composites are used as catalysts in Li-O₂ batteries, the battery has a better discharge specific capacity of 9550 mA h g⁻¹ (catalyst mass), and the cycle stability of the battery has been improved, which is stable for 85 cycles.

Unveiling Intrinsic Potassium Storage Behaviors of Hierarchical Nano Bi@N-Doped Carbon Nanocages Framework via In Situ Characterizations

Metallic bismuth has drawn attention as a promising alloying anode for advanced potassium ion batteries (PIBs). However, serious volume expansion/electrode pulverization and sluggish kinetics always lead to its inferior cycling and rate properties for practical applications. Therefore, advanced Bi-based anodes via structural/compositional optimization and sur-/interface design are needed. Herein, we develop a bottom-up avenue to fabricate nanoscale Bi encapsulated in a 3D N-doped carbon nanocages (Bi@N-CNCs) framework with a void space by using a novel Bi-based metal-organic framework as the precursor. With elaborate regulation in annealing temperatures, the optimized Bi@N-CNCs electrode exhibits large reversible capacities and long-duration cyclic stability at high rates when evaluated as competitive anodes for PIBs. Insights into the intrinsic K⁺ -storage processes of the Bi@N-CNCs anode are put forward from comprehensive in situ characterizations.

Ultralow Ru-Induced Bimetal Electrocatalysts with a Ru-Enriched and Mixed-Valence Surface Anchored on a Hollow Carbon Matrix for Oxygen Reduction and Water Splitting

Rational design of trifunctional electrocatalysts with robust efficiency used for oxygen reduction, oxygen evolution, and hydrogen evolution reactions (ORR, OER, and HER) is of significance to renewable energy conversion techniques, which remains a challenging issue. This study integrates dominant Co/Co₃O₄ with a small fraction of RuO₂ and the CoRu alloy anchored on a hollow carbon matrix, originating from the novel Ru-doped hollow metal-organic framework (MOF) precursor, which is synthesized via tannic etching and ion exchange. Notably, the introduced ultralow Ru (1.28 wt %) not only generates new Ru-based species but also induces a Ru-enriched surface with abundant oxygen vacancies. Moreover, a suitable balance among different valencies of Co or Ru can be tuned by oxidation time, resulting in preferable Co²⁺ and Ru⁴⁺ species. Triggered by these unparalleled surface properties along with good conductivity, hollow structure, and the synergistic effect of multiple active sites, the resulting CoRu-O/A@hollow nitrogen-doped carbon (HNC) shows robust catalytic performance for ORR/OER/HER in an alkaline electrolyte. Typically, it exhibits a potential gap of 0.662 V for OER/ORR and enables an alkaline water electrolyzer with a cell voltage of 1.558 V at 10 mA cm^-2. This work would serve as guidance for well construction of transition-metal-based trifunctional electrocatalysts by the MOF-assisted strategy or the modulation effects of low-content Ru.

A magnetic CoRu-CoOX nanocomposite efficiently hydrogenates furfural to furfuryl alcohol at ambient H2 pressure in water

A one-pot synthesized CoRu-CoOX nanocomposite was reported as a magnetically recoverable catalyst for selective hydrogenation of furfural to furfuryl alcohol in water at ambient H2 pressure.