Preparation of (Zn1+xGe)(N2Ox) nanoparticles with enhanced NOx decomposition activity under visible light irradiation by nitridation of Zn2GeO4 nanoparticles designed precisely

Revolutionizing carbon chemistry: Solar-powered C(sp3)-N bond activation and CO2 transformation via newly designed SBE-Y cutting-edge dynamic photocatalyst

A solvent-free sulfur-bridge-eosin-Y (SBE-Y) polymeric framework photocatalyst was prepared for the first time through an in situ thermal polymerization route using elemental sulfur (S8) as a bridge. The addition of a sulfur bridge to the polymeric framework structure resulted in an allowance of the harvesting range of eosin-Y (E-Y) for solar light. This shows that a wider range of solar light can be used by the bridge material's photocatalytic reactions. In this context, supercharged solar spectrum: enhancing light absorption and hole oxidation with sulfur bridges. This suggests that the excited electrons and holes through solar light can contribute to oxidation-reduction reactions more potently. As a result, the photocatalyst-enzyme attached artificial photosynthesis system developed using SBE-Y as a photocatalyst performs exceptionally well, resulting in high 1,4-NADH regeneration (86.81%), followed by its utilization in the exclusive production of formic acid (210.01 μmol) from CO2 and synthesis of fine chemicals with 99.9% conversion yields. The creation of more effective photocatalytic materials for environmental clean-up and other applications that depend on the solar light-driven absorption spectrum of inorganic and organic molecules could be one of the practical ramifications of this research.

Penternary Wurtzitic Nitrides Li1-xZnxGe2-xGaxN3: Powder Synthesis, Crystal Structure, and Potentiality as a Solar-Active Photocatalyst

We developed a new penternary wurtzitic nitride system Li1-xZnxGe2-xGaxN3 (0 ≤ x ≤ 1) by hybridizing LiGe2N3 and ZnGeGaN3. Fairly stoichiometric fine powder samples were synthesized by the reduction-nitridation process at 900 °C. While the end member LiGe2N3 possessed a relatively large band gap of 4.16 eV, the band gap of the developed penternary system varied in a broad range of 3.81 to 3.10 eV, showing promising responsivity to the solar spectrum. The crystal structure of LiGe2N3 was precisely determined by time-of-flight neutron powder diffraction for the first time, revealing the complete ordering of Li and Ge in the Cmc21 structure. The structural evolution from completely ordered LiGe2N3 to fully disordered ZnGeGaN3 was quantitatively analyzed by Rietveld refinement based on a partially disordered Cmc21 model, and the obtained results were also supported by 71Ga solid-state NMR spectroscopy. The synthesized Li1-xZnxGe2-xGaxN3 powder samples exhibited photocatalytic activities for the water reduction and oxidation reactions under solar light irradiation, with the H2 evolution rate of 0.3-59.0 μmol/h and the O2 evolution rate of 3.1-296.2 μmol/h, depending on the composition. Stable solar hydrogen generation of up to 48 h was demonstrated by the x = 0.80 sample, with the total amount of H2 evolved over 1.6 mmol and an external quantum efficiency of 2.1%.

Theoretical Investigation of the BCN Monolayer and Their Derivatives for Metal-free CO2 Photocatalysis, Capture, and Utilization

In recent years, carbon capture and utilization (CCU) has been explored as an attractive solution to global warming, which is mainly caused by increasing CO2 emission levels. Many functional materials have been developed for removing atmospheric CO2 and converting it to more useful forms of carbon. Traditional metallic photocatalytic species have drawbacks-photocorrosion, low visible-light absorbance, and environmental damage; therefore, metal-free materials have attracted considerable research attention. In particular, boron nitride (BN) possesses unique B-N bonds, characterized by a large difference in the electronegativity of atoms that facilitates CO2 reduction, and catalytic CO2 reduction by boron carbon nitride (BCN) has been demonstrated under visible light; hence, these two materials can be considered potential CO2 reduction photocatalysts. However, further modification of the materials and their applicability to other CCU applications have not been extensively explored. Therefore, we decided to investigate the modification of BCN monolayers, with the aim of ensuring that the properties of the materials are better suited, first, to the requirements of CO2 photocatalysis, and second, to those of carbon capture or other optoelectronic applications. In this study, we considered various novel BCN monolayers, based on modification via metal-free substitutional doping and nitrogen vacancy creation, and performed first-principles density functional theory calculations. The effects of the modifications on band gap tuning, charge transfer, and the CO2 adsorption ability were all studied. Specifically, ON-B13C8N11 and SiC-2 × 2-BC6N were shown to possess excellent properties for photocatalytic CO2 reduction, and OC-2 × 2-BC6N and Nv-4 × 4-BN can be considered for future CO2 capture materials. These results contribute to existing CCU approaches, suggesting that BCN monolayer modification merits further investigation, and offering insights relevant to other photocatalytic applications.

Introducing a Pyrazinoquinoxaline Derivative into a Metal-Organic Framework: Achieving Fluorescence-Enhanced Detection for Cs+ and Enhancing Photocatalytic Activity

Conventional photoresponsive materials have low photon utilization due to irregular distribution of photoactive groups, which severely limits the related real applications. Metal-organic frameworks (MOFs) can modulate the regular arrangement of functional groups to improve the electron transport paths and enhance the photon utilization, which provides strong support for the development of photoactive materials with excellent performance. In this work, one effective strategy for constructing a photoactive MOF had been developed via the utilization of Cd2+ and pyrazinoquinoxaline tetracarboxylic acid. The structural advantages of the Cd-MOF, such as a porous structure, abundant subject-object interaction sites, and a stable framework, ensure the prerequisite for various applications, while the better synergistic effect of Cd3 clusters and the pyrazinoquinoxaline derivative ensures efficient electron transfer efficiency. Therefore, by virtue of these structural advantages, the Cd-MOF can achieve fluorescence quenching detection for a variety of substrates, such as Fe3+, Cr2O72-, MnO4-, nitrofuran antibiotics, and TNP explosives, while fluorescence enhancement detection can be achieved for halogen ions, Cs+, Pb2+, and NO2-. In addition, the Cd-MOF can be used as a photocatalyst to successfully achieve the photocatalytic conversion of benzylamine to N-benzylbenzimidate under mild conditions. Thus, the Cd-MOF as a whole shows the possibility of application as a diverse fluorescence detection and photocatalyst and also illustrates the feasibility of preparing high-performance photoactive materials using the pyrazinoquinoxaline derivative.

Novel electrospun bead-like Ag2MoO4 nanofibers coated on Ni foam for visible light-driven heterogeneous photocatalysis and high-performance supercapacitor electrodes

Novel Ag2MoO4 nanocomposite fibers were designed to enhance the photocatalytic response and supercapacitor performance of MoO3 grown via the sol-gel electrospinning technique. The Ag2MoO4 nanocomposite fibers exhibit a high specific surface area of 49.3 m2 g-1 comprising nanobeads that aggregate in the fibrous structure. The photodegradation efficiency of Ag2MoO4 was evaluated as 62% under visible light irradiation which improved to 71% with heterogeneous photocatalysis. The Ag2MoO4@Ni foam exhibited a low Rct of 19.6 Ω, and an enhanced specific capacitance of 1445 F g-1 was obtained at 1 A g-1, with 93% of its initial capacitance remaining after 5000 cycles. In addition, the Ag2MoO4//activated carbon asymmetric supercapacitor possesses an excellent energy density of 76.6 W h kg-1 at 743.2 W kg-1 and a noteworthy cycling durability of 91% after 5000 cycles. Our findings demonstrate that the electrospun Ag2MoO4@Ni foam is an important and inexpensive electrode material for supercapacitor applications and visible light-driven heterogeneous photocatalysis, drawing on the synergic effects of Ag and Mo to exhibit much better performance.

Structural, mechanical, electronic and optical properties of N-decorated single-walled silicon carbide nanotube photocatalyst for hydrogen evolution via water splitting: a DFT study

This work investigates the fundamental photocatalytic properties of nitrogen-doped single-walled silicon carbide nanotubes (N-doped SWSiCNTs) for hydrogen evolution for the first time. Investigations of the structural, mechanical, electronic, and optical properties of the studied systems were carried out using popular density functional theory implemented in quantum ESPRESSO and Yambo codes. Analysis of the structural properties revealed high mechanical stability with the 3.6% and 7.4% N-doped SWSiCNT. The calculated band gap of the N-doped SWSiCNT with 3.6% demonstrated a value of 2.56 eV which is within the photocatalytic range of 2.3 eV-2.8 eV. The hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) potentials of the 3.6% N-doped SWSiCNT also showed good agreement with previous theoretical data. The studied material showed the best photocatalytic performance in both parallel and perpendicular directions by absorbing photons in the visible region. Therefore, the observed structural, mechanical, electronic and optical behaviors demonstrated by the 3.6% N-doped SWSiCNT exposed it as a better photocatalyst for hydrogen production under visible light.

Persistent Luminescence Zn2GeO4:Mn2+ Nanoparticles Functionalized with Polyacrylic Acid: One-Pot Synthesis and Biosensing Applications

Zinc germanate doped with Mn²⁺ (Zn₂GeO₄:Mn²⁺) is known to be a persistent luminescence green phosphor with potential applications in biosensing and bioimaging. Such applications demand nanoparticulated phosphors with a uniform shape and size, good dispersibility in aqueous media, high chemical stability, and surface-functionalization. These characteristics could be major bottlenecks and hence limit their practical applications. This work describes a one-pot, microwave-assisted hydrothermal method to synthesize highly uniform Zn₂GeO₄:Mn²⁺ nanoparticles (NPs) using polyacrylic acid (PAA) as an additive. A thorough characterization of the NPs showed that the PAA molecules were essential to realizing uniform NPs as they were responsible for the ordered aggregation of their building blocks. In addition, PAA remained attached to the NPs surface, which conferred high colloidal stability to the NPs through electrostatic and steric interactions, and provided carboxylate groups that can act as anchor sites for the eventual conjugation of biomolecules to the surface. In addition, it was demonstrated that the as-synthesized NPs were chemically stable for, at least, 1 week in phosphate buffer saline (pH range = 6.0-7.4). The luminescence properties of Zn₂GeO₄ NPs doped with different contents of Mn²⁺ (0.25-3.00 mol %) were evaluated to find the optimum doping level for the highest photoluminescence (2.50% Mn) and the longest persistent luminescence (0.50% Mn). The NPs with the best persistent luminescence properties were photostable for at least 1 week. Finally, taking advantage of such properties and the presence of surface carboxylate groups, the Zn₂GeO₄:0.50%Mn²⁺ sample was successfully used to develop a persistent luminescence-based sandwich immunoassay for the autofluorescence-free detection of interleukin-6 in undiluted human serum and undiluted human plasma samples. This study demonstrates that our persistent Mn-doped Zn₂GeO₄ nanophosphors are ideal candidates for biosensing applications.

Recent Advances in Ternary Metal Oxides Modified by N Atom for Photocatalysis

Ternary metal oxides (TMOs) with flexible band structures are of significant potential in the field of photocatalysis. The efficient utilization of renewable and green solar energy is of great importance to developing photocatalysts. To date, a wide range of TMOs systems has been developed as photocatalysts for water and air purification, but their practical applications in visible light-assisted chemical reactions are hindered mainly by its poor visible light absorption capacity. Introduction of N atoms into TMOs can narrow the band-gap energy to a lower value, enhance the absorption of visible light and suppress the recombination rate of photogenerated electrons and holes, thus improving the photocatalytic performance. This review summarizes the recent research on N-modified TMOs, including the influence of N doping amounts, N doping sites, and N-induced phase transformation. The introduced N greatly tuned the optical properties, electronic structure, and photocatalytic activity of the TMOs. The optimal N concentration and the influence of N doping sites are investigated. The substitutional N and interstitial N contributed differently to the band gap and electron transport. The introduced N can tune the vacancies in TMOs due to the charge compensation, which is vital for inducing different activity and selectivity. The topochemical ammonolysis process can convert TMOs to oxynitride with visible light absorption. By altering the band structures, these oxynitride materials showed enhanced photocatalytic activity. This review provides an overview of recent advances in N-doped TMOs and oxynitrides derived from TMOs as photocatalysts for environmental applications, as well as some relevant pointers for future burgeoning research development.

Erbium Single Atom Composite Photocatalysts for Reduction of CO2 under Visible Light: CO2 Molecular Activation and 4f Levels as an Electron Transport Bridge

It is still challenging to design a stable and efficient catalyst for visible-light CO₂ reduction. Here, Er³⁺ single atom composite photocatalysts are successfully constructed based on both the special role of Er³⁺ and the special advantages of Zn₂ GeO₄ /g-C₃ N₄ heterojunction in the photocatalysis reduction of CO₂ . Especially, Zn₂ GeO₄ :Er³⁺ /g-C₃ N₄ obtained by in situ synthesis is not only more conducive to the tight junction of Zn₂ GeO₄ and g-C₃ N₄ , but also more favorable for g-C₃ N₄ to anchor rare-earth atoms. Under visible-light irradiation, Zn₂ GeO₄ :Er³⁺ /g-C₃ N₄ shows more than five times enhancement in the catalytic efficiency compared to that of pure g-C₃ N₄ without any sacrificial agent in the photocatalytic reaction system. A series of theoretical and experimental results show that the charge density around Er, Ge, Zn, and O increases compared with Zn₂ GeO₄ :Er³⁺ , while the charge density around C decreases compared with g-C₃ N₄ . These results show that an efficient way of electron transfer is provided to promote charge separation, and the dual functions of CO₂ molecular activation of Er³⁺ single atom and 4f levels as electron transport bridge are fully exploited. The pattern of combining single-atom catalysis and heterojunction opens up new methods for enhancing photocatalytic activity.

Synthesis of zinc germanium oxynitride nanotube as a visible-light driven photocatalyst for NOx decomposition through ordered morphological transformation from Zn2GeO4 nanorod obtained by hydrothermal reaction

Oxynitrides with narrow band gap are promising materials as visible-light sensitive photocatalysts, because introduction of nitrogen ions can negatively shift the position of valence band maximum of the corresponding oxides to negative side. (Zn_1+xGe)(N₂O_x) with wurtzite structure is one of the oxynitride materials. (Zn_1+xGe)(N₂O_x) with nanotube morphology was synthesized by nitridation of Zn₂GeO₄ nanorods at 800 °C for 6 h. During the nitridation process, the nanorod with smooth surface was transformed into nanotube with rough surface in spite of no template for formation of tube structure. The nanotube formation can be caused by ordered morphological transformation from Zn₂GeO₄ nanorod during the nitridation. (Zn_1+xGe)(N₂O_x) nanotube exhibited a large specific surface area due to its nanotube morphology and the ability to be responsive to visible light because of the narrow band gap of 2.76 eV. Compared to (Zn_1+xGe)(N₂O_x) synthesized by conventional solid state reaction, the optimized (Zn_1+xGe)(N₂O_x) nanotube possessed enhanced photocatalytic NO_x decomposition activity under both ultraviolet and visible light irradiation.