Scalable fabrication of high-performance micro-supercapacitors by embedding thick interdigital microelectrodes into microcavities

Wired for Success: Probing the Effect of Tissue-Engineered Neural Interface Substrates on Cell Viability

This study investigates the electrochemical behavior of GelMA-based hydrogels and their interactions with PC12 neural cells under electrical stimulation in the presence of conducting substrates. Focusing on indium tin oxide (ITO), platinum, and gold mylar substrates supporting conductive scaffolds composed of hydrogel, graphene oxide, and gold nanorods, we explored how the substrate materials affect scaffold conductivity and cell viability. We examined the impact of an optimized electrical stimulation protocol on the PC12 cell viability. According to our findings, substrate selection significantly influences conductive hydrogel behavior, affecting cell viability and proliferation as a result. In particular, the ITO substrates were found to provide the best support for cell viability with an average of at least three times higher metabolic activity compared to platinum and gold mylar substrates over a 7 day stimulation period. The study offers new insights into substrate selection as a platform for neural cell stimulation and underscores the critical role of substrate materials in optimizing the efficacy of neural interfaces for biomedical applications. In addition to extending existing work, this study provides a robust platform for future explorations aimed at tailoring the full potential of tissue-engineered neural interfaces.

Three dimensional high-performance micro-supercapacitors with switchable high power density and high energy density

In the field of microscale energy storage, the fabrication of micro-supercapacitors (MSCs) with high power density and high energy density has always been a focus of research. In this work, laser-induced porous graphene and chemically deposited manganese dioxide nanoparticles are used as electrode materials, and a switchable MSC with two energy storage principles is obtained by designing symmetric interdigitated and square electrode structures. The aim is to overcome the preparation challenge of supercapacitors with high energy density and high power density by switching between two modes. In this MSC, the energy density of the high energy density mode (5.89 μW h cm-2) is 3.36 times that of the high power density mode (1.75 μW h cm-2), while the power density of the high power density mode (43.06 μW cm-2) is 1.44 times that of the high energy density mode (29.96 μW cm-2). In addition, under the drive of five serially connected MSCs, 27 LED lights can be continuously lit for 5 minutes. Therefore, this work provides a facile and novel method for the development of MSCs with high power density and high energy density, suggesting a great practical application value in the development of MSCs.

Multi-step electrodeposited Ni-Co-P@LDH nanocomposites for high-performance interdigital asymmetric micro-supercapacitors

The development of high-performance electrode materials and the rational design of asymmetric structures are the two main keys to fabricating micro-supercapacitors (MSCs) with high energy density. Transition metal compounds, especially nickel-cobalt phosphides and hydroxides, are promising electrode materials with excellent pseudo-capacitance. However, they are rarely used in fabricating asymmetric MSCs (AMSCs) due to the limitations of the preparation method. In this work, we constructed hierarchical Ni-Co-P@LDH nanocomposites with outstanding mass specific capacitance (1980 F g^-1 at 1 A g^-1) via a multi-step electrodeposition method, which is employed with FeOOH to fabricate an interdigital AMSC device (Ni-Co-P@LDHs//PVA-KOH//FeOOH). The as-prepared device exhibits a high working voltage (1.4 V), a large specific capacitance (24.0 mF cm^-2 at 0.14 mA cm^-2), a high energy density (6.54 μW h cm^-2 at a power density of 100 μW cm^-2) and good cycling stability (86.5% of capacitance retention after 5000 cycles). This work may provide novel methods for the synthesis of high-performance nickel-cobalt composite materials and their potential applications in interdigital AMSC devices.

Tuning the Mechanical and Electrical Properties of Porous Electrodes for Architecting 3D Microsupercapacitors with Batteries-Level Energy

Microsupercapacitors (MSCs) are vital power sources for internet of things (IoTs) and miniaturized electronics. The performance of MSCs is often restricted by its low areal energy density, which is due to the low areal mass loading of active materials. Constructing thick planar microelectrode with fine structure and high aspect ratio is an efficient way to increase mass loading, but limited by the breakable nature of porous electrode materials. Here, it is found that the mechanical and electrical properties of porous electrodes, as well as their surface area utilization and internal ion diffusion pathway, can be synergistically tuned by infilling gel electrolyte into internal pores of porous electrode films. The tuned thick porous electrode films are robust enough to enable laser ablation of three dimensional (3D) microelectrodes for high mass loading and high aspect ratio. The areal capacitance of 3D microelectrodes is able to increase linearly with mass loading (or thickness) up to at least 13 mg cm^-2  (or 260 µm) for a value of up to 4640 mF cm^-2 based on active carbon. The 3D MSCs deliver areal energy density of 1318 μWh cm^-2 , which is comparable to the best of Li-ion 3D microbatteries while exhibiting superior electrochemical and mechanical stability.