Synthesis, growth mechanisms, and applications of palladium-based nanowires and other one-dimensional nanostructures

Rational Design and Facile Preparation of Palladium-Based Electrocatalysts for Small Molecules Oxidation

Direct liquid fuel cells (DLFCs) can convert the chemical energy of small organic molecules directly into electrical energy, which is a promising technique and always calls for electrocatalysts with high activity, stability and selectivity. Palladium (Pd)-based catalysts for DLFCs have been widely studied with the pursuit of ultra-high performance, however, most of the preparation routes require complex agents, multi-operation steps, even extreme experimental conditions, which are high-cost, energy-consuming, and not conducive to the scalable and sustainable production of catalysts. In this review, the recent progresses on not only the rational design strategies, but also the facile preparation methods of Pd-based electrocatalysts for small molecules oxidation reaction (SMOR) are comprehensively summarized. Based on the principles of green chemistry in material synthesis, the basic rules of "facile method" have been restricted, and the fabrication processes, perks and drawbacks, as well as practical applications of the "real" facile methods have been highlighted. The landscape of this review is to facilitate the mild preparation of efficient Pd-based electrocatalysts for SMOR, that is, to achieve a balance between "facile preparation" and "outstanding performance", thereby to stimulate the huge potential of sustainable nano-electrocatalysts in various research and industrial fields.

Study on the Gas-Chromic Character of Pd/TiO2 for Fast Room-Temperature CO Detection

As a widely used support, TiO2 has often been combined with Pd to form highly sensitive gas-chromic materials. Herein, we prepared a series of Pd/TiO2 catalysts with different Pd content (from 0.1 to 5 wt.%) by the impregnation method for their utilization in fast room-temperature CO detection. The detection was simply based on visible color change when the Pd/TiO2 was exposed to CO. The sample with 1 wt.% Pd/TiO2 presented an excellent CO gasochromic character, associated with a maximum chromatic aberration value of 90 before and after CO exposure. Systematic catalyst characterizations of XPS, FT-IR, CO-TPD, and N2 adsorption-desorption and density functional theory calculations for the CO adsorption and charge transfer over the Pd and PdO surfaces were further carried out. It was found that the interaction between CO and the Pd surface was strong, associated with a large adsorption energy of -1.99 eV and charge transfer of 0.196 e. The color change was caused by a reduction in Pd2+ to metallic Pd0 over the Pd/TiO2 surface after CO exposure.

Agriculture and environmental management through nanotechnology: Eco-friendly nanomaterial synthesis for soil-plant systems, food safety, and sustainability

Through the advancement of nanotechnology, agricultural and food systems are undergoing strategic enhancements, offering innovative solutions to complex problems. This scholarly essay thoroughly examines nanotechnological innovations and their implications within these critical industries. Traditional practices are undergoing radical transformation as nanomaterials emerge as novel agents in roles traditionally filled by fertilizers, pesticides, and biosensors. Micronutrient management and preservation techniques are further enhanced, indicating a shift towards more nutrient-dense and longevity-oriented food production. Nanoparticles (NPs), with their unique physicochemical properties, such as an extraordinary surface-to-volume ratio, find applications in healthcare, diagnostics, agriculture, and other fields. However, concerns about their potential overuse and bioaccumulation raise unanswered questions about their health effects. Molecule-to-molecule interactions and physicochemical dynamics create pathways through which nanoparticles cause toxicity. The combination of nanotechnology and environmental sustainability principles leads to the examination of green nanoparticle synthesis. The discourse extends to how nanomaterials penetrate biological systems, their applications, toxicological effects, and dissemination routes. Additionally, this examination delves into the ecological consequences of nanomaterial contamination in natural ecosystems. Employing robust risk assessment methodologies, including the risk allocation framework, is recommended to address potential dangers associated with nanotechnology integration. Establishing standardized, universally accepted guidelines for evaluating nanomaterial toxicity and protocols for nano-waste disposal is urged to ensure responsible stewardship of this transformative technology. In conclusion, the article summarizes global trends, persistent challenges, and emerging regulatory strategies shaping nanotechnology in agriculture and food science. Sustained, in-depth research is crucial to fully benefit from nanotechnology prospects for sustainable agriculture and food systems.

Facile Synthesis of High-Entropy Alloy Nanowires for Electrocatalytic Alcohol Oxidation

Considering the structural and compositional advantages of high-entropy alloy (HEA) as high-efficient electrocatalysts, we here present a facile method to prepare high-entropy alloy nanowires with seven elements in an aqueous solution. The as-synthesized PdPtCuAgAuPbCo nanowires possess dispersed one-dimensional morphology and exhibit enhanced electrocatalytic performance with the mass activity of 9.9 A mgPd+Pt -1 toward ethanol electrooxidation. The HEA nanowires also perform superior stability, resistance to CO poisoning, and good electrocatalytic activities toward other alcohols (e. g., ethylene glycol and methanol) oxidation. The synthesis strategy is easy to operate with low cost and has wide application prospects for preparing desired electrocatalysts for fuel cells.

Hydride formation and dynamic phase changes during template-assisted Pd electrodeposition

We investigated the structural evolution of electrochemically fabricated Pd nanowiresin situby means of grazing-incidence transmission small- and wide-angle x-ray scattering (GTSAXS and GTWAXS), x-ray fluorescence (XRF) and two-dimensional surface optical reflectance (2D-SOR). This shows how electrodeposition and the hydrogen evolution reaction (HER) compete and interact during Pd electrodepositon. During the bottom-up growth of the nanowires, we show thatβ-phase Pd hydride is formed. Suspending the electrodeposition then leads to a phase transition fromβ-phase Pd hydride toα-phase Pd. Additionally, we find that grain coalescence later hinders the incorporation of hydrogen in the Pd unit cell. GTSAXS and 2D-SOR provide complementary information on the volume fraction of the pores occupied by Pd, while XRF was used to monitor the amount of Pd electrodeposited.

Bimetallic Nanoalloy Catalysts for Green Energy Production: Advances in Synthesis Routes and Characterization Techniques

Bimetallic Nanoalloy catalysts have diverse uses in clean energy, sensing, catalysis, biomedicine, and energy storage, with some supported and unsupported catalysts. Conventional synthetic methods for producing bimetallic alloy nanoparticles often produce unalloyed and bulky particles that do not exhibit desired characteristics. Alloys, when prepared with advanced nanoscale methods, give higher surface area, activity, and selectivity than individual metals due to changes in their electronic properties and reduced size. This review demonstrates the synthesis methods and principles to produce and characterize highly dispersed, well-alloyed bimetallic nanoalloy particles in relatively simple, effective, and generalized approaches and the overall existence of conventional synthetic methods with modifications to prepare bimetallic alloy catalysts. The basic concepts and mechanistic understanding are represented with purposely selected examples. Herein, the enthralling properties with widespread applications of nanoalloy catalysts in heterogeneous catalysis are also presented, especially for Hydrogen Evolution Reaction (HER), Oxidation Reduction Reaction (ORR), Oxygen Evolution Reaction (OER), and alcohol oxidation with a particular focus on Pt and Pd-based bimetallic nanoalloys and their numerous fields of applications. The high entropy alloy is described as a complicated subject with an emphasis on laser-based green synthesis of nanoparticles and, in conclusion, the forecasts and contemporary challenges for the controlled synthesis of nanoalloys are addressed.

Theory of Anisotropic Metal Nanostructures

A significant challenge in the development of functional materials is understanding the growth and transformations of anisotropic colloidal metal nanocrystals. Theory and simulations can aid in the development and understanding of anisotropic nanocrystal syntheses. The focus of this review is on how results from first-principles calculations and classical techniques, such as Monte Carlo and molecular dynamics simulations, have been integrated into multiscale theoretical predictions useful in understanding shape-selective nanocrystal syntheses. Also, examples are discussed in which machine learning has been useful in this field. There are many areas at the frontier in condensed matter theory and simulation that are or could be beneficial in this area and these prospects for future progress are discussed.

Recent progress on the synthesis of metal alloy nanowires as electrocatalysts

Benefiting from both one-dimensional (1D) morphology and alloy composition, metal alloy nanowires have been exploited as advanced electrocatalysts in various electrochemical processes. In this review, the synthesis approaches for metal alloy nanowires are classified into two categories: direct syntheses and syntheses based on preformed 1D nanostructures. Ligand systems that are of critical importance to the formation of alloy nanowires are summarized and reviewed, together with the strategies imposed to achieve the co-reduction of different metals. Meanwhile, different scenarios that form alloy nanowires from pre-synthesized 1D nanostructures are compared and contrasted. In addition, the characterization and electrocatalytic applications of metal alloy nanowires are briefly discussed.

Paper-Based Hydrogen Sensors Using Ultrathin Palladium Nanowires

Hydrogen (H₂), as a chemical energy carrier, is a cleaner alternative to conventional fossil fuels with zero carbon emission and high energy density. The development of fast, low-cost, and sensitive H₂ detection systems is important for the widespread adoption of H₂ technologies. Paper is an environment-friendly, porous, and flexible material with great potential for use in sustainable electronics. Here, we report a paper-based sensor for room-temperature H₂ detection using ultrathin palladium nanowires (PdNWs). To elucidate the sensing mechanism, we compare the performance of polycrystalline and quasi-single-crystalline PdNWs. The polycrystalline PdNWs showed a response of 4.3% to 1 vol % H₂ with response and recovery times of 4.9 and 10.6 s, while quasi-single-crystalline PdNWs showed a response of 8% to 1 vol % H₂ with response and recovery times of 9.3 and 13.0 s, respectively. The polycrystalline PdNWs show excellent selectivity, stability, and sensitivity, with a limit of detection of 10 ppm H₂ in air. The fast response of ultrathin polycrystalline PdNW paper-based sensors arises from the synergistic effects of their ultrasmall diameter, high-index surface facets, strain-coupled grain boundaries, and porous paper substrate. This paper-based sensor is one of the fastest chemiresistive H₂ sensors reported and is potentially orders of magnitude less expensive than current state-of-the-art H₂-sensing solutions. This brings low-cost, room-temperature chemiresistive H₂ sensing closer to the performance of ultrafast optical sensors and high-temperature metal oxide-based sensors.

Solvated electron-induced synthesis of cyclodextrin-coated Pd nanoparticles: mechanistic, catalytic, and anticancer studies

Herein, using in situ generated solvated electrons in the reaction media, a highly time-efficient, one-pot green approach has been employed to synthesize palladium (Pd) nanoparticles (NPs) coated with a molecular assembly of α-cyclodextrin (α-CD). The appearance of a shoulder peak at 280 nm in the UV-Vis absorption spectra indicated the formation of Pd NPs, which was further confirmed from their cubic phase XRD pattern. The nanomorphology varied considerably as a function of the dose rate, wherein sphere-shaped NPs (average size ∼ 7.6 nm) were formed in the case of high dose rate electron-beam assisted synthesis, while nanoflakes self-assembled to form nanoflower-shaped morphologies in a γ-ray mediated approach involving a low dose rate. The formation kinetics of NPs was investigated by pulse radiolysis which revealed the formation of Pd-based transients by the solvated electron-induced reaction. Importantly, no interference of α-CD was observed in the kinetics of the transient species, rather it played the role of a morphology directing agent in addition to a biocompatible stabilizing agent. The catalytic studies revealed that the morphology of the NPs has a significant effect on the reduction efficiency of 4-nitrophenol to 4-aminophenol. Another important highlight of this work is the demonstration of the morphology-dependent anticancer efficacy of Pd NPs against lung and brain cancer cells. Notably, flower-shaped Pd NPs exhibited significantly higher cancer cell killing as compared to spherical NPs, while being less toxic towards normal lung fibroblasts. Nonetheless, these findings show the promising potential of Pd NPs in anticancer treatment.

Pd-Co-Based Electrodes for Hydrogen Production by Water Splitting in Acidic Media

To realize the benefits of a hydrogen economy, hydrogen must be produced cleanly, efficiently and affordably from renewable resources and, preferentially, close to the end-users. The goal is a sustainable cycle of hydrogen production and use: in the first stage of the cycle, hydrogen is produced from renewable resources and then used to feed a fuel cell. This cycle produces no pollution and no greenhouse gases. In this context, the development of electrolyzers producing high-purity hydrogen with a high efficiency and low cost is of great importance. Electrode materials play a fundamental role in influencing electrolyzer performances; consequently, in recent years considerable efforts have been made to obtain highly efficient and inexpensive catalyst materials. To reach both goals, we have developed electrodes based on Pd-Co alloys to be potentially used in the PEMEL electrolyzer. In fact, the Pd-Co alloy is a valid alternative to Pt for hydrogen evolution. The alloys were electrodeposited using two different types of support: carbon paper, to fabricate a porous structure, and anodic alumina membrane, to obtain regular arrays of nanowires. The goal was to obtain electrodes with very large active surface areas and a small amount of material. The research demonstrates that the electrochemical method is an ideal technique to obtain materials with good performances for the hydrogen evolution reaction. The Pd-Co alloy composition can be controlled by adjusting electrodeposition parameters (bath composition, current density and deposition time). The main results concerning the fabrication process and the characterization are presented and the performance in acid conditions is discussed.

Palladium Nanosheet-Based Dual Gas Sensors for Sensitive Room-Temperature Hydrogen and Carbon Monoxide Detection

Palladium has long been explored for use in gas sensors because of its excellent catalytic properties and its unique property of forming hydrides in the presence of H₂. However, pure Pd-based sensors usually suffer from low response and a relatively high limit of detection. Palladium nanosheets (PdNS) are of particular interest for gas sensing applications due to their high surface area and excellent electrical conductivity. Here, we demonstrate the design and fabrication of low-cost PdNS-based dual gas sensors for room-temperature detection of H₂ and CO over a wide concentration range. We fabricated sensors using multiwalled carbon nanotube@PdNS (MWCNT@PdNS) composites and compared their performance against pure PdNS devices for hydrogen sensing based on electrical resistive response. Devices using PdNS alone had a response and response time of 0.4% and 50 s, respectively, to 1% H₂ in air. MWCNT@PdNS (1:5 mass ratio) showed enhanced performance at a lower hydrogen concentration with a limit of detection (LOD_H2) of 5 ppm. Nearly an order of magnitude increase in response was observed on increasing the amount of MWCNT to 50 mass % in the nanocomposite, but the response fell off at low H₂ concentration. Overall, these PdNS-based sensors were found to show good repeatability, stability, and performance under humid conditions. Their response was selective for H₂ versus CH₄, CO₂, and NH₃; the response to CO was comparable in magnitude but opposite in sign to the response to H₂. Upon simultaneous exposure to equal concentrations (10 ppm each) of H₂ and CO, the response to CO was dominant. The PdNS showed high sensitivity to CO, detecting as little as 1 ppm CO in air at room temperature. The sensitivity to CO could be used either in a stand-alone room-temperature CO detector, where H₂ is known not to be present, or in combination with CO and combustible gas detectors to distinguish H₂ from other combustible gases.

Pursuing unprecedent anisotropic morphologies of halide-free Pd nanoparticles by tuning nucleation and growth

In this paper, a highly effective and scalable polyol-based modified procedure is reported, yielding shape controlled Pd nanoparticles (NPs) formed via two distinct growth mechanisms as a function of the...

Nanowire-based sensor electronics for chemical and biological applications

Detection and recognition of chemical and biological species via sensor electronics are important not only for various sensing applications but also for fundamental scientific understanding. In the past two decades, sensor devices using one-dimensional (1D) nanowires have emerged as promising and powerful platforms for electrical detection of chemical species and biologically relevant molecules due to their superior sensing performance, long-term stability, and ultra-low power consumption. This paper presents a comprehensive overview of the recent progress and achievements in 1D nanowire synthesis, working principles of nanowire-based sensors, and the applications of nanowire-based sensor electronics in chemical and biological analytes detection and recognition. In addition, some critical issues that hinder the practical applications of 1D nanowire-based sensor electronics, including device reproducibility and selectivity, stability, and power consumption, will be highlighted. Finally, challenges, perspectives, and opportunities for developing advanced and innovative nanowire-based sensor electronics in chemical and biological applications are featured.

Organic/Inorganic Hybrid Fibers: Controllable Architectures for Electrochemical Energy Applications

Organic/inorganic hybrid fibers (OIHFs) are intriguing materials, possessing an intrinsic high specific surface area and flexibility coupled to unique anisotropic properties, diverse chemical compositions, and controllable hybrid architectures. During the last decade, advanced OIHFs with exceptional properties for electrochemical energy applications, including possessing interconnected networks, abundant active sites, and short ion diffusion length have emerged. Here, a comprehensive overview of the controllable architectures and electrochemical energy applications of OIHFs is presented. After a brief introduction, the controllable construction of OIHFs is described in detail through precise tailoring of the overall, interior, and interface structures. Additionally, several important electrochemical energy applications including rechargeable batteries (lithium-ion batteries, sodium-ion batteries, and lithium-sulfur batteries), supercapacitors (sandwich-shaped supercapacitors and fiber-shaped supercapacitors), and electrocatalysts (oxygen reduction reaction, oxygen evolution reaction, and hydrogen evolution reaction) are presented. The current state of the field and challenges are discussed, and a vision of the future directions to exploit OIHFs for electrochemical energy devices is provided.

Development of enzyme-free single-step immunoassays for glycocholic acid based on palladium nanoparticle-mediated signal generation

Palladium nanoparticles (PdNPs) are composed mainly of inert noble metals, and their outstanding properties have attracted wide attention. PdNPs are not only capable of mimicking the oxidase-like characteristics of natural bio-enzymes, but they also present a clear black band in the test zone. In this work, the synthesized PdNPs promoted a transformation of colorless tetramethylbenzidine (TMB) to a blue oxidation product of TMB, providing a K_m value of 0.09 mM for TMB, and revealing the good catalytic performance of the synthesized PdNPs. For both signal generation and amplification, PdNPs effectively replaced natural bio-enzymes as a new labeling tag. Thus, the PdNP-based enzyme-free single-step immunoassays were successfully developed for efficient and sensitive detection of glycocholic acid (GCA). Under optimal conditions, a noticeable linear relationship was identified by the enzyme-linked immunosorbent assay (ELISA) over a range of 8-2390 ng/mL, while the visual limit of detection (vLOD) in the constructed lateral flow immunoassay (LFA) was 10 ng/mL for GCA. The recovery rate in spiked urine samples obtained by the ELISA ranged from 84.2 to 117.9%, which was consistent with the results in LFA. The present work demonstrates the potential of PdNPs as labeling matrices in enzyme-free single-step immunoassays.

Extraordinary Nanocrystalline Pb Whisker Growth from Bi-Mg-Pb Pools in Aluminum Alloy 6026 Moderated through Oriented Attachment

The elucidation of spontaneous growth of metal whiskers from metal surfaces is still ongoing, with the mainstream research conducted on Sn whiskers. This work reports on the discovery of Pb whisker growth from Bi-Mg-Pb solid pools found in common machinable aluminum alloy. The whiskers and hillocks display unique morphologies and complex growth that have not been documented beforehand. In contrast to typical understanding of whisker growth, the presented Pb whiskers show a clear nanocrystalline induced growth mechanism, which is a novel concept. Furthermore, the investigated whiskers are also found to be completely composed of nanocrystals throughout their entire length. The performed research gives new insight into nucleation and growth of metal whiskers, which raises new theoretical questions and challenges current theories of spontaneous metal whisker growth. Additionally, this work provides the first microscopic confirmation of recrystallization growth theory of whiskers that relates to oriented attachment of nanocrystals formed within an amorphous metallic matrix. The impact of mechanical stress, generated through Bi oxidation within the pools, is theoretically discussed with relation to the observed whisker and hillock growth. The newly discovered nanocrystalline growth provides a new step towards understanding spontaneous metal whisker growth and possibility of developing nanostructures for potential usage in sensing and electronics applications.

High-Index Faceted PdPtCu Ultrathin Nanorings Enable Highly Active and Stable Oxygen Reduction Electrocatalysis

Ultrathin nanosheet catalysts deliver great potential in catalyzing the oxygen reduction reaction (ORR), but encounter the ceiling of the surface atomic utilizations, thus presenting a challenge associated with further boosting catalytic activity. Herein, a kind of PdPtCu ultrathin nanorings with increased numbers of electrocatalytically active sites is reported, with the purpose of breaking the activity ceiling of conventional catalysts. The as-made PdPtCu nanorings possess abundant high-index facets at the edge of both the exterior and interior surfaces. An ultrahigh electrochemical active surface area of 92.2 m² g^-1 _PGM is achieved on this novel catalyst, much higher than that of the commercial Pt/C catalyst. The optimized Pd₃₉ Pt₃₃ Cu₂₈ /C shows a great enhanced ORR activity with a specific activity of 2.39 mA cm^-2 and a mass activity of 1.97 A mg^-1 _PGM at 0.9 V (versus RHE), as well as superior durability within 30 000 cycles. Density function theory calculations reveal that the high-index facets and alloying Cu atoms can optimize the oxygen adsorption energy, explaining the enhanced ORR activity. Overcoming a key technical barrier in sub-nanometer electrocatalysts, this work successfully introduces the hollow structures into the ultrathin nanosheets, heralding the exciting prospects of high-performance ORR catalysts in fuel cells.

Ultrathin and Wavy PdB Alloy Nanowires with Controlled Surface Defects for Enhanced Ethanol Oxidation Electrocatalysis

Engineering crystalline structures/defects and elemental compositions is synthetically critical to optimize surface features of noble metal nanocrystals and thus improve their catalytic performances in various reactions. In this manuscript, we report a facile one-step aqueous synthesis of one-dimensional (1D) noble metal-metalloid alloy nanowires (NWs) with an ultrathin and wavy morphology, controlled crystalline defects, and binary PdB compositions as a highly efficient catalyst toward the electrochemical ethanol oxidation reaction (EOR). We show that the utilization of hexadecylpyridinium chloride as functional surfactant is of great importance to confine in-the-columnar epitaxial nucleation of anisotropic ultrathin PdB NWs, while the attachment growth precisely controls their surface crystalline defects with a wavy morphology. Meanwhile, this strategy is synthetically universal and can be readily extended to engineer an ultrathin wavy morphology and crystalline defect of ternary PdMB (M = Cu and Pt) alloy NWs. Owing to multiple structural and compositional merits, resultant PdB alloy NWs synergistically expose more electrocatalytically active sites and also kinetically accelerate the removal of CO-related poisons, remarkably improving electrocatalytic EOR activity and stability compared to their counterpart catalysts. Besides, wavy PdB alloy NWs are also electrochemically more active for electrocatalytic oxidation of other alcohols (methanol, glycerol, and glucose). The findings reported here thus shed a bright light on rational design of the high-performance metal alloy catalysts for their potential applications in fine chemical synthesis, fuel cells, and beyond.

Nonspherical Metal-Based Nanoarchitectures: Synthesis and Impact of Size, Shape, and Composition on Their Biological Activity

Metal-based nanoentities, apart from being indispensable research tools, have found extensive use in the industrial and biomedical arena. Because their biological impacts are governed by factors such as size, shape, and composition, such issues must be taken into account when these materials are incorporated into multi-component ensembles for clinical applications. The size and shape (rods, wires, sheets, tubes, and cages) of metallic nanostructures influence cell viability by virtue of their varied geometry and physicochemical interactions with mammalian cell membranes. The anisotropic properties of nonspherical metal-based nanoarchitectures render them exciting candidates for biomedical applications. Here, the size-, shape-, and composition-dependent properties of nonspherical metal-based nanoarchitectures are reviewed in the context of their potential applications in cancer diagnostics and therapeutics, as well as, in regenerative medicine. Strategies for the synthesis of nonspherical metal-based nanoarchitectures and their cytotoxicity and immunological profiles are also comprehensively appraised.

Copper@ZIF-8 Core-Shell Nanowires for Reusable Antimicrobial Face Masks

SARS-CoV-2 and other respiratory viruses spread via aerosols generated by infected people. Face masks can limit transmission. However, widespread use of disposable masks consumes tremendous resources and generates waste. Here, a novel material for treating blown polypropylene filtration media used in medical-grade masks to impart antimicrobial activity is reported. To produce thin copper@ZIF-8 core-shell nanowires (Cu@ZIF-8 NWs), Cu NWs are stabilized using a pluronic F-127 block copolymer, followed by growth of ZIF-8 to obtain uniform core-shell structures. The Cu@ZIF-8 NWs are applied to filtration media by dip coating. Aerosol filtration efficiency decreases upon exposure to ethanol (solvent for dip-coating), but increases with addition of Cu@ZIF-8 NWs. Cu@ZIF-8 NWs shows enhanced antibacterial activity, compared to Cu NWs or ZIF-8 alone, against Streptococcus mutans and Escherichia coli. Antiviral activity against SARS-CoV-2 is assayed using virus-infected Vero E6 cells, demonstrating 55% inhibition of virus replication after 48 h by 1 µg of Cu@ZIF-8 NWs per well. Cu@ZIF-8 NWs' cytotoxicity is tested against four cell lines, and their effect on inflammatory response in A549 cells is examined, demonstrating good biocompatibility. This low-cost, scalable synthesis and straightforward deposition of Cu@ZIF-8 NWs onto filter media has great potential to reduce disease transmission, resource consumption, and environmental impact of waste.

Engineering the morphology of palladium nanostructures to tune their electrocatalytic activity in formic acid oxidation reactions

Pd nanomaterials can be cheaper alternative catalysts for the electrocatalytic formic acid oxidation reaction (FAOR) in fuel cells. The size and shape of the nanoparticles and crystal engineering can play a crucial role in enhancing the catalytic activities of Pd nanostructures. A systematic study on the effect of varying the morphology of Pd nanostructures on their catalytic activities for FAOR is reported here. Palladium nanoparticles (Pd_0D), nanowires (Pd_1D) and nanosheets (Pd_2D) could be synthesized by using swollen liquid crystals as 'soft' templates. Swollen liquid crystals are lyotropic liquid crystals that are formed from a quaternary mixture of a surfactant, cosurfactant, brine and Pd salt dissolved in oil. Pd_1D nanostructures exhibited 2.7 and 19 fold higher current density than Pd_0D and Pd_2D nanostructures in the FAOR. The Pd_1D nanostructure possess higher electrochemically active surface area (ECSA), better catalytic activity, stability, and lower impedance to charge transfer when compared to the Pd_0D and Pd_2D nanostructures. The presence of relatively higher amounts of crystal defects and enriched (100) crystal facets in the Pd_1D nanostructure were found to be the reasons for their enhanced catalytic activities.

Synthesis of Metal Nanostructures Using Supercritical Carbon Dioxide: A Green and Upscalable Process

Metallic nanostructures have numerous applications as industrial catalysts and sensing platforms. Supercritical carbon dioxide (scCO₂ ) is a green medium for the scalable preparation of nanomaterials. Supercritical fluid reactive deposition (SFRD) and other allied techniques can be employed for the mass production of metal nanostructures for various applications. The present article reviews the recent reports on the scCO₂ -assisted preparation of zero-valent metal nanomaterials and their applications. A brief description of the science of pure supercritical fluids, especially CO₂ , and the basics of binary mixtures composed of scCO₂ and a low volatile substance, e.g., an organometallic precursor are presented. The benefits of using scCO₂ for preparing metal nanomaterials, especially as a green solvent, are also being highlighted. The experimental conditions that are useful for the tuning of particle properties are reviewed thoroughly. The range of modifications to the classical SFRD methods and the variety of metallic nanomaterials that can be synthesized are reviewed and presented. Finally, the broad ranges of applications that are reported for the metallic nanomaterials that are synthesized using scCO₂ are reviewed. A brief summary along with perspectives about future research directions is also presented.

Ternary metal-metalloid-nonmetal alloy nanowires: a novel electrocatalyst for highly efficient ethanol oxidation electrocatalysis

We report rational design and syntheses of ternary noble metal-metalloid-nonmetal alloy nanowires (NWs) as a novel electrocatalyst for electrochemical ethanol oxidation reaction (EOR). This novel electrocatalyst is formed in an aqueous solution via anisotropic nucleation and growth of ternary PdBP alloy NWs along assembled cylinder template of Plurolic F127 on a nitrogen-functionalized graphene support (denoted as PdBP NWs@N-G). We find that uniformly alloying B and P intrinsically modulates the electronic states of Pd catalyst and also introduces new functions into the catalyst, while NW structure supported on the N-G exposes more electrocatalytic active sites and accelerates electron/mass transfers. Such add-in synergies of PdBP NWs@N-G kinetically facilitate the removal and/or further oxidation of CO-based poisoning intermediates, thus remarkably enhancing the electrocatalytic EOR performance. They exhibit a high mass activity of 4.15 A mg_Pd^-1 and superior cycling and chronoamperometric stability for electrocatalytic EOR, much better than previously reported monometallic Pd-based nanocatalysts. More interestingly, this design strategy can be easily extended to develop more sophisticated NWs catalysts with more compositions (for example quaternary PdCuBP NWs@N-G) that further tunes the electronic and bifuntional effects for various desired catalysis and electrocatalysis.

Synthesis of Citrate-Coated Penta-twinned Palladium Nanorods and Ultrathin Nanowires with a Tunable Aspect Ratio

Green and scalable methodologies for the preparation of metal nanoparticles with fine control of shape and size are of high interest in many areas including catalysis, nanomedicine, and nanodiagnostics. In this contribution, we describe a new synthetic method for the production of palladium (Pd) penta-twinned nanowires and nanorods utilizing sodium citrate, formic acid, ascorbic acid, and potassium bromide (KBr) in water, without the use of surfactants or polymers. The synthesis is green, fast, and without the need of complex setups. Interestingly, a microwave-assisted scale-up process has been developed. The combination of a synthetic protocol for seeds and the seed-mediated growth process allows us to synthesize nanorods and nanowires by modulating the concentration of KBr. The synthesized nanomaterials have been physicochemically characterized. High-resolution transmission electron microscopy shows that the nanorods and nanowires have a penta-twinned structure enclosed by {100} lateral facets. Moreover, the absence of sticky molecules or toxic byproducts guarantees the biocompatibility of the nanomaterials, while leaving the surface clean to perform enzymatic activities.

Kinetically Manipulating the Nucleus Attachment to Create Atypical Defective Rh-Pt Alloyed Nanostructures as Active Electrocatalysts

Defective metal nanostructures have attracted great attention due to the striking catalytic behavior of the defect sites. Atypical metal nanocrystals generated from attached nuclei can accommodate abundant grain boundaries (GBs) and twin boundaries (TBs). However, the understanding of their growth-mechanism and precisely synthetic control over such defective nanocrystals are still scarce. Herein, using the Rh-Pt nanoalloy as a model system, we systematically demonstrate that a prudent control of the reaction kinetics can manipulate the metal nucleation and nucleus attachment to create atypical nanocrystals, including small isolated nanoparticles (NPs), defect-rich wavy nanowires (WNWs), and {100} facet-bounded spliced nanocubes (SNCs). In the ethanol oxidation electrocatalysis, the Rh₄₇ Pt₅₃ WNWs featured with abundant TBs and GBs show the greatest mass activity (0.655 A ⋅ mg^-1 _Pt , 2.9 times to the commercial Pt/C) and durability. Our work captures the core of reaction kinetics on regulating the nucleus attachment and enables the rational control over the nanocrystal morphology and defect.

Hydrogen Sensing at Room Temperature Using Flame-Synthesized Palladium-Decorated Crumpled Reduced Graphene Oxide Nanocomposites

We present a unique three-dimensional palladium (Pd)-decorated crumpled reduced graphene oxide ball (Pd-CGB) nanocomposite for hydrogen (H₂) detection in air at room temperature. Pd-CGB nanocomposites were synthesized using a rapid continuous flame aerosol technique. Graphene oxide reduction and metal decoration occurred simultaneously in a high-temperature reducing jet (HTRJ) process to produce Pd nanoparticles that were below 5 nm in average size and uniformly dispersed in the crumpled graphene structure. The sensors made from these nanocomposites were sensitive over a wide range of H₂ concentrations (0.0025-2%) with response value, response time, and recovery time of 14.8%, 73 s, and 126 s, respectively, at 2% H₂. Moreover, they were sensitive to H₂ in both dry and humid conditions. The sensors were stable and recoverable after 20 cycles at 2% H₂ with no degradation associated with volume expansion of Pd. Unlike two-step methods for fabricating Pd-decorated graphene sensors, the HTRJ process enables single-step formation of Pd- and other metal-decorated graphene nanocomposites with great potential for creating various gas sensors by simple drop-casting onto low-cost electrodes.