Accelerated site-selective photooxidation on Au nanoparticles via electrochemically-assisted plasmonic hole ejection

Anisotropic growth of Au-Ag heteronanostructures through plasmon-induced reduction

Plasmonic heteronanostructures are promising building blocks for photofunctional materials and devices including photocatalysts, optical materials, and optoelectronic devices. In the present work, we fabricated Au-Ag bimetallic heteronanostructures based on site-selective and anisotropic Ag deposition and growth on Au nanocubes. Plasmonic Au nanocubes were adsorbed onto a glass plate, and the distal mode or proximal-distal mode of the nanocubes was selectively excited in the presence of Ag+ and citrate ions. Polycrystalline Ag was deposited around the top of the Au nanocubes by the distal mode excitation, and single crystalline Ag was grown laterally from the Au nanocubes by the proximal-distal mode excitation. The present method would be applied to the fabrication of various plasmonic nanostructures composed of two or more heterodomains.

Photomodulated Spatially Confined Chemical Reactivity in a Single Silver Nanoprism

Single-atom and single-particle catalysis is an area of considerable topical interest due to their potential in explaining important fundamental processes and applications across several areas. An interesting avenue in single-particle catalysis is spatial control of chemical reactivity within the particle by employing light as an external stimulus. To demonstrate this concept, we report galvanic replacement reactions (GRRs) as a spatial marker of subparticle chemical reactivity of a silver nanoprism with AuCl₄^- ions under optical excitation. The location of a GRR within a single Ag nanoprism can be spatially controlled depending on the plasmon mode excited. This leads to chemomorphological transformation of Ag nanoprisms into interesting Ag-Au structures. This spatial biasing effect is attributed to localized hot electron injection from the tips and edges of the silver nanoprisms to the adjacent reactants that correlate with excitation of different surface plasmon modes. The study also employs low-energy-loss EELS mapping to additionally probe the spatially confined redox reaction within a silver nanoprism. The findings presented here allow the visualization of a plasmon-driven subparticle chemical transformation with high resolution. The selective optical excitation of surface plasmon eigenmodes of anisotropic nanoparticles offers opportunities to spatially modulate chemical transformations mediated by hot electron transfer.

Plasmonic hot electrons for sensing, photodetection, and solar energy applications: A perspective

In plasmonic metals, surface plasmon resonance decays and generates hot electrons and hot holes through non-radiative Landau damping. These hot carriers are highly energetic, which can be modulated by the plasmonic material, size, shape, and surrounding dielectric medium. A plasmonic metal nanostructure, which can absorb incident light in an extended spectral range and transfer the absorbed light energy to adjacent molecules or semiconductors, functions as a "plasmonic photosensitizer." This article deals with the generation, emission, transfer, and energetics of plasmonic hot carriers. It also describes the mechanisms of hot electron transfer from the plasmonic metal to the surface adsorbates or to the adjacent semiconductors. In addition, this article highlights the applications of plasmonic hot electrons in photodetectors, photocatalysts, photoelectrochemical cells, photovoltaics, biosensors, and chemical sensors. It discusses the applications and the design principles of plasmonic materials and devices.

Enhancing Catalytic Activity and Selectivity by Plasmon-Induced Hot Carriers

Plasmon-assisted chemical transformation holds great potential for solar energy conversion. However, simultaneous enhancement of reactivity and selectivity is still challenging and the mechanism remains mysterious. Herein, we elucidate the localized surface plasmon resonance (LSPR)-induced principles underlying the enhanced activity (∼70%) and selectivity of photoelectrocatalytic redox of nitrobenzene (NB) on Au nanoparticles. Hot carriers selectively accelerate the conversion rate from NB to phenylhydroxylamine (PHA) by ∼14% but suppress the transformation rate from PHA to nitrosobenzene (NSB) by ∼13%. By adding an electron accepter, the as-observed suppression ratio is substantially enlarged up to 43%. Our experiments, supported by in situ surface-enhanced Raman spectroscopy and density functional theory simulations, reveal such particular hot-carrier-induced selectivity is conjointly contributed by the accelerated hot electron transfer and the corresponding residual hot holes. This work will help expand the applications of renewable sunlight in the directional production of value-added chemicals under mild conditions.

Plasmonic hole ejection involved in plasmon-induced charge separation

Since the finding of plasmon-induced charge separation (PICS) at the interface between a plasmonic metal nanoparticle and a semiconductor, which has been applied to photovoltaics including photodetectors, photocatalysis including water splitting, sensors and data storage in the visible/near-infrared ranges, injection of hot electrons (energetic electrons) into semiconductors has attracted attention almost exclusively. However, it has recently been found that behaviours of holes are also important. In this review, studies on the hot hole ejection from plasmonic nanoparticles are described comprehensively. Hole ejection from plasmonic nanoparticles on electron transport materials including n-type semiconductors allows oxidation reactions to take place at more positive potentials than those involved in a charge accumulation mechanism. Site-selective oxidation is also one of the characteristics of the hole ejection and is applied to photoinduced nanofabrication beyond the diffraction limit. Hole injection into hole transport materials including p-type semiconductors (HTMs) in solid-state cells, hole ejection through a HTM for stabilization of holes, hole ejection to a HTM for efficient hot electron ejection, voltage up-conversion by the use of hot carriers and electrochemically assisted hole ejection are also described.

Photoinduced Chirality Switching of Metal-Inorganic Plasmonic Nanostructures

Chiral plasmonic nanodevices whose handedness can be switched reversibly between right and left by external stimulation have attracted much attention. However, they require delicate DNA nanostructures and/or continuous external stimulation. In this study, those issues are addressed by using metal-inorganic nanostructures and photoinduced reversible redox reactions at the nanostructures, namely, site-selective oxidation due to plasmon-induced charge separation under circularly polarized visible light (CPL) and reduction by UV-induced TiO₂ photocatalysis. We irradiate gold nanorods (AuNRs) supported on TiO₂ with right- or left-CPL to generate electric fields with chiral distribution around each AuNR and to deposit PbO₂ at the sites where the electric fields are localized, for fixing the chirality to the AuNR. The nanostructures thus prepared exhibit circular dichroism (CD) based on longitudinal and transverse plasmon modes of the AuNRs. Their chirality given by right-CPL (or left-CPL) is locked until PbO₂ is rereduced under UV light. After unlocking by UV, the chirality can be switched by left-CPL (or right-CPL) irradiation, resulting in reversed CD signals and locking the switch again. The handedness of the chiral plasmonic nanodevice can be switched reversibly and repeatedly.

Controlling the oxidation state of molybdenum oxide nanoparticles prepared by ionic liquid/metal sputtering to enhance plasmon-induced charge separation

Nanoparticles composed of molybdenum oxide, MoO_x, were successfully prepared by room-temperature ionic liquid (RTIL)/metal sputtering followed by heat treatment. Hydroxyl groups in RTIL molecules retarded the coalescence between MoO_x NPs during heat treatment at 473 K in air, while the oxidation state of Mo species in MoO_x nanoparticles (NPs) could be modified by changing the heat treatment time. An LSPR peak was observed at 840 nm in the near-IR region for MoO_x NPs of 55 nm or larger in size that were annealed in a hydroxyl-functionalized RTIL. Photoexcitation of the LSPR peak of MoO_x NPs induced electron transfer from NPs to ITO electrodes.

MoO_x NPs, prepared by sputtering Mo metal on a room-temperature ionic liquid (RTIL) followed by heating in air, produced anodic photocurrents with the excitation of their LSPR peak.