Synthesis of lead-free Cs3Sb2Br9 perovskite alternative nanocrystals with enhanced photocatalytic CO2 reduction activity

Defects of Metal Halide Perovskites in Photocatalytic Energy Conversion: Friend or Foe?

Photocatalytic solar-to-fuel conversion over metal halide perovskites (MHPs) has recently attracted much attention, while the roles of defects in MHPs are still under debate. Specifically, the mainstream viewpoint is that the defects are detrimental to photocatalytic performance, while some recent studies show that certain types of defects contribute to photoactivity enhancement. However, a systematic summary of why it is contradictory and how the defects in MHPs affect photocatalytic performance is still lacking. In this review, the innovative roles of defects in MHP photocatalysts are highlighted. First, the origins of defects in MHPs are elaborated, followed by clarifying certain benefits of defects in photocatalysts including optical absorption, charge dynamics, and surface reaction. Afterward, the recent progress on defect-related MHP photocatalysis, i.e., CO2 reduction, H2 generation, pollutant degradation, and organic synthesis is systematically discussed and critically appraised, putting emphasis on their beneficial effects. With defects offering peculiar sets of merits and demerits, the personal opinion on the ongoing challenges is concluded and outlining potentially promising opportunities for engineering defects on MHP photocatalysts. This critical review is anticipated to offer a better understanding of the MHP defects and spur some inspiration for designing efficient MHP photocatalysts.

Photocatalytic CO2 Reduction Using Zinc Indium Sulfide Aggregated Nanostructures Fabricated under Four Anionic Conditions

Zinc indihuhium sulfide (ZIS), among various semiconductor materials, shows considerable potential due to its simplicity, low cost, and environmental compatibility. However, the influence of precursor anions on ZIS properties remains unclear. In this study, we synthesized ZIS via a hydrothermal method using four different anionic precursors (ZnCl2/InCl3, Zn(NO3)2/In(NO3)3, Zn(CH3CO2)2/In(CH3CO2)3, and Zn(CH3CO2)2/In2(SO4)3), resulting in distinct morphologies and crystal structures. Our findings reveal that ZIS produced from Zn(CH3CO2)2/In2(SO4)3 (ZIS-AceSO4) exhibited the highest photocatalytic CO2 reduction efficiency, achieving a CO production yield of 134 μmol g-1h-1. This enhanced performance is attributed to the formation of more zinc and indium vacancy defects, as confirmed by EDS analysis. Additionally, we determined the energy levels of the valence band maximum (VBM) and the conduction band minimum (CBM) via UPS and absorption spectra, providing insights into the band alignment essential for photocatalytic processes. These findings not only deepen our understanding of the anionic precursor's impact on ZIS properties but also offer new avenues for optimizing photocatalytic CO2 reduction, marking a significant advancement over previous studies.

Recent advances in metal halide perovskite based photocatalysts for artificial photosynthesis and organic transformations

Metal halide perovskites (MHP) emerged as highly promising materials for photocatalysis, offering significant advancements in the degradation of soluble and airborne pollutants, as well as the transformation of functional organic compounds. This comprehensive review focuses on recent developments in MHP-based photocatalysts, specifically examining two major categories: lead-based (such as CsPbBr3) and lead-free variants (e.g. Cs2AgBiX6, Cs3Bi2Br9 and others). While the review briefly discusses the contributions of MHPs to hydrogen (H2) production and carbon dioxide (CO2) reduction, the main emphasis is on the design principles that determine the effectiveness of perovskites in facilitating organic reactions and degrading hazardous chemicals through oxidative transformations. Furthermore, the review addresses the key factors that influence the catalytic efficiency of perovskites, including charge recombination, reaction mechanisms involving free radicals, hydroxyl ions, and other ions, as well as phase transformation and solvent compatibility. By offering a comprehensive overview, this review aims to serve as a guide for the design of MHP-based photocatalysis and shed light on the common challenges faced by the scientific community in the domain of organic transformations.

New visible-light-driven Bi2MoO6/Cs3Sb2Br9 heterostructure for selective photocatalytic oxidation of toluene to benzaldehyde

Herein, new Bi2MoO6/Cs3Sb2Br9 heterostructure (BiMo/CSB) was investigated for the first time as a visible-light-driven photocatalyst for C(sp3)-H bond activation using molecular oxygen as a green oxidant and toluene as a model substrate. The optimized BiMo/CSB photocatalyst exhibited enhanced toluene oxidation activity (2,346 μmol g-1h-1), which was almost two- and five-fold that of pristine CSB (1,165 μmol g-1h-1) and BiMo (482 μmol g-1h-1), respectively. The improved photocatalytic performance was essentially attributed to the formation of staggered band energy lineup in the BiMo/CSB hybrid, which promoted S-scheme charge transfer across the BiMo/CSB heterointerface as supported by ultraviolet photoelectron spectroscopy (UPS), density functional theoretical (DFT), time-resolve photoluminescence (TRPL), and photoelectrochemical studies. Spin-trapping electron paramagnetic resonance (EPR) and radical scavenging studies revealed that photoinduced hole, molecular oxygen, and superoxide radical are key active species in this photocatalytic system. The developed BiMo/CSB catalyst provided good selectivity toward benzaldehyde product (94-98 %), presumably due to the inhibiting effect of benzyl alcohol on benzaldehyde oxidation. No significant change in structure and morphology was observed for the spent catalyst, however small negative shift of Sb 3d and Bi 4f binding energy was found suggesting partial reduction of Sb3+ and Bi3+. This work not only provides a new visible-light-driven photocatalyst for C(sp3)-H bond activation but also opens the doors for exploitation of the conversion and functionalization of this inert bond toward the production of high value-added organic chemicals.

Stabilizing Metal Halide Perovskites for Solar Fuel Production: Challenges, Solutions, and Future Prospects

Metal halide perovskites (MHPs) are emerging photocatalyst materials that can enable sustainable solar-to-chemical energy conversion by virtue of their broad absorption spectra, effective separation/transport of photogenerated carriers, and solution processability. Although preliminary studies show the excellent photocatalytic activities of MHPs, their intrinsic structural instability due to the low formation energy and soft ionic nature is an open challenge for their practical applications. This review discusses the latest understanding of the stability issue and strategies to overcome this issue for MHP-based photocatalysis. First, the origin of the instability issue at atomic levels and the design rules for robust structures are analyzed and elucidated. This is then followed by presenting several different material design strategies for stability enhancement, including reaction medium modification, material surface protection, structural dimensionality engineering, and chemical composition engineering. Emphases are placed on understanding the effects of these strategies on photocatalytic stability as well as the possible structure-performance correlation. Finally, the possible future research directions for pursuing stable and efficient MHP photocatalysts in order to accelerate their technological maturity on a practical scale are outlined. With that, it is hoped to provide readers a valuable snapshot of this rapidly developing and exciting field.

The Dark Side of Lead-Free Metal Halide Nanocrystals: Substituent-Modulated Photocatalytic Activity in Benzyl Bromide Reduction

We illustrate here the high photocatalytic activity of sustainable lead-free metal halide nanocrystals (NCs), namely, Cs₃Sb₂Br₉ NCs, in the reduction of p-substituted benzyl bromides in the absence of a cocatalyst. The electronic properties of the benzyl bromide substituents and the substrate affinity to the NC surface determine the selectivity in C-C homocoupling under visible light irradiation. This photocatalyst can be reused for at least three cycles and preserves its good performance with a turnover number of ca. 105,000.

Direct Conversion of CO2 into Hydrocarbon Solar Fuels by a Synergistic Photothermal Catalysis

Photothermal coupling catalysis technology has been widely studied in recent years and may be a promising method for CO2 reduction. Photothermal coupling catalysis can improve chemical reaction rates and realize the controllability of reaction pathways and products, even in a relatively moderate reaction condition. It has inestimable value in the current energy and global environmental crisis. This review describes the application of photothermal catalysis in CO2 reduction from different aspects. Firstly, the definition and advantages of photothermal catalysis are briefly described. Then, different photothermal catalytic reductions of CO2 products and catalysts are introduced. Finally, several strategies to improve the activity of photothermal catalytic reduction of CO2 are described and we present our views on the future development and challenges of photothermal coupling. Ultimately, the purpose of this review is to bring more researchers’ attention to this promising technology and promote this technology in solar fuels and chemicals production, to realize the value of the technology and provide a better path for its development.

Photocatalysis and perovskite oxide-based materials: a remedy for a clean and sustainable future

The massive use of non-renewable energy resources by humankind to fulfill their energy demands is causing severe environmental issues. Photocatalysis is considered one of the potential solutions for a clean and sustainable future because of its cleanliness, inexhaustibility, efficiency, and cost-effectiveness. Significant efforts have been made to design highly proficient photocatalyst materials for various applications such as water pollutant degradation, water splitting, CO2 reduction, and nitrogen fixation. Perovskite photocatalyst materials are gained special attention due to their exceptional properties because of their flexibility in chemical composition, structure, bandgap, oxidation states, and valence states. The current review is focused on perovskite materials and their applications in photocatalysis. Special attention has been given to the structural, stoichiometric, and compositional flexibility of perovskite photocatalyst materials. The photocatalytic activity of perovskite materials in different photocatalysis applications is also discussed. Various mechanisms involved in photocatalysis application from wastewater treatment to hydrogen production are also provided. The key objective of this review is to encapsulate the role of perovskite materials in photocatalysis along with their fundamental properties to provide valuable insight for addressing future environmental challenges.

Synthesis of Stable Lead-Free Cs3 Sb2 (Brx I1- x )9 (0 ≤ x ≤ 1) Perovskite Nanoplatelets and Their Application in CO2 Photocatalytic Reduction

Exploring photocatalysts to foster CO₂ photoreduction into high value-added chemicals is of great significance. Lead halide perovskites (LHPs) have recently been extensively investigated as photocatalysts, owing to their facile fabrication and prominent optoelectronic properties. However, the toxicity of lead and instability will hinder their future large-scale applications. To address these challenges, a series of lead-free Sb-based all-inorganic mixed halide perovskite Cs₃ Sb₂ (Br_x I_{1- x} )₉ (0 ≤ x ≤ 1) nanoplatelets (NPLs) is synthesized. The perovskite NPLs are prepared using a ligand-assisted re-precipitation approach at 50 °C. The authors observe the tunability of their optical band gaps from 2.1 to 2.5 eV, and they can maintain the excellent stability over 120 h under heating at 100 °C or UV light irradiation. The resultant materials are employed as efficient photocatalysts for visible-light driven CO₂ reduction at the gas-solid interface. The Cs₃ Sb₂ (Br_0.7 I_0.3 )₉ perovskite NPLs afford an impressive overall yield of 27.7 µmol g^-1 for the selective photocatalytic conversion of CO₂ into CO. This study represents a significant demonstration for practical artificial photosynthesis by using LHP materials as photocatalysts.

Two-Step Chemical Vapor Deposition-Synthesized Lead-Free All-Inorganic Cs3Sb2Br9 Perovskite Microplates for Optoelectronic Applications

Lead-based halide perovskites (APbX₃, where A = organic or inorganic cation, X = Cl, Br, I) are suitable materials for many optoelectronic devices due to their many attractive properties. However, the concern of lead toxicity and the poor ambient and operational stability of the organic cation group greatly limit their practical utilization. Therefore, there has recently been great interest in lead-free, environment-friendly all-inorganic halide perovskites (IHPs). Sb and Sn are common species suggested to replace Pb for Pb-free IHPs. However, the large difference in the melting points of the precursor materials (e.g., CsBr and SbBr₃ precursors for Cs₃Sb₂Br₉) makes the chemical vapor deposition (CVD) growth of high-quality Pb-free IHPs a very challenging task. In this work, we developed a two-step CVD method to overcome this challenge and successfully synthesized Pb-free Cs₃Sb₂Br₉ perovskite microplates. Cs₃Sb₂Br₉ microplates ∼25 μm in size with the exciton absorption peak at ∼2.8 eV and a band gap of ∼2.85 eV were obtained. The microplates have a smooth hexagonal morphology and show a large Stokes shift of ∼450 meV and exciton binding energy of ∼200 meV. To demonstrate the applications of these microplates in optoelectronics, simple photoconductive devices were fabricated. These photodetectors exhibit a current on/off ratio of 2.36 × 10², a responsivity of 36.9 mA/W, and a detectivity of 1.0 × 10¹⁰ Jones with a fast response of rise and decay time of 61.5 and 24 ms, respectively, upon 450 nm photon irradiation. Finally, the Cs₃Sb₂Br₉ microplates also show good stability in ambient air without encapsulation. These results demonstrate that the 2-step CVD process is an effective approach to synthesize high-quality all-inorganic lead-free Cs₃Sb₂Br₉ perovskite microplates that have the potential for future high-performance optoelectronic device applications.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

Advances in Theoretical Calculation of Halide Perovskites for Photocatalysis

Photocatalysis, which includes water splitting for hydrogen fuel generation, degradation of organic pollutants, and CO2 reduction using renewable solar energy, is one of the most promising solutions for environmental protection and energy conversion. Halide perovskite has recently emerged as a new promising material for photocatalytic applications. The exploration of new efficient halide perovskite-based photocatalysts and understanding of photocatalytic reaction mechanisms can be revealed using theoretical calculations. The progress and applications of first-principles atomistic modeling and simulation of halide perovskite photocatalysts, including metal halide perovskites, halide perovskite heterojunctions, and other promising perovskite derivatives, are presented in this review. Critical insights into the challenges and future research directions of photocatalysis using halide perovskites are also discussed.

Recent advances in g-C3N4 composites within four types of heterojunctions for photocatalytic CO2 reduction

Studies of photocatalytic conversion of CO₂ into hydrocarbon fuels, as a promising solution to alleviate global warming and energy issues, are booming in recent years. Researchers have focused their interest in developing g-C₃N₄ composite photocatalysts with intriguing features of robust light harvesting ability, excellent catalysis, and stable performance. Four types of heterojunctions (type-II, Z-scheme, S-scheme and Schottky) of the g-C₃N₄ composites are widely adopted. This review aims at presenting and comparing the photocatalytic mechanisms, characteristics, and performances of g-C₃N₄ composites concerning these four types of heterojunctions. Besides, perspectives and undergoing efforts for further development of g-C₃N₄ composite photocatalysts are discussed. This review would be helpful for researchers to gain a comprehensive understanding of the progress and future development trends of g-C₃N₄ composite heterojunctions for photocatalytic CO₂ reduction.

Perovskite-inspired materials for photovoltaics and beyond-from design to devices

Lead-halide perovskites have demonstrated astonishing increases in power conversion efficiency in photovoltaics over the last decade. The most efficient perovskite devices now outperform industry-standard multi-crystalline silicon solar cells, despite the fact that perovskites are typically grown at low temperature using simple solution-based methods. However, the toxicity of lead and its ready solubility in water are concerns for widespread implementation. These challenges, alongside the many successes of the perovskites, have motivated significant efforts across multiple disciplines to find lead-free and stable alternatives which could mimic the ability of the perovskites to achieve high performance with low temperature, facile fabrication methods. This Review discusses the computational and experimental approaches that have been taken to discover lead-free perovskite-inspired materials, and the recent successes and challenges in synthesizing these compounds. The atomistic origins of the extraordinary performance exhibited by lead-halide perovskites in photovoltaic devices is discussed, alongside the key challenges in engineering such high-performance in alternative, next-generation materials. Beyond photovoltaics, this Review discusses the impact perovskite-inspired materials have had in spurring efforts to apply new materials in other optoelectronic applications, namely light-emitting diodes, photocatalysts, radiation detectors, thin film transistors and memristors. Finally, the prospects and key challenges faced by the field in advancing the development of perovskite-inspired materials towards realization in commercial devices is discussed.

All-inorganic lead-free metal halide perovskite quantum dots: progress and prospects

Lead halide perovskite quantum dots have drawn worldwide attention due to their quantum confinement effect and excellent optical gain properties. It is worth noting that due to the toxicity of lead ions and the inherent instability of organic groups, research on all-inorganic lead-free metal halide perovskite quantum dots (ILFHPQDs) has become a hot spot in recent years. This paper summarizes the latest research progress of ILFHPQDs, analyzes the sources and limitations affecting the performance of ILFHPQDs, and provides the improvement methods. Firstly, the typical synthesis strategies of ILFHPQDs are discussed, followed by a focus on the structural characteristics, optoelectronic properties and stability of each type of ILFHPQD. Next, the applications of ILFHPQDs in devices are investigated. Finally, the challenges, solutions and future application directions of ILFHPQDs are prospected.

Metal halide perovskites as an emergent catalyst for CO2 photoreduction: a minireview

The present minireview summarizes recent advances in the application of metal halide perovskite for CO₂ photoreduction.

Recent Developments in Lead and Lead-Free Halide Perovskite Nanostructures towards Photocatalytic CO2 Reduction

Perovskite materials have been widely considered as emerging photocatalysts for CO2 reduction due to their extraordinary physicochemical and optical properties. Perovskites offer a wide range of benefits compared to conventional semiconductors, including tunable bandgap, high surface energy, high charge carrier lifetime, and flexible crystal structure, making them ideal for high-performance photocatalytic CO2 reduction. Notably, defect-induced perovskites, for example, crystallographic defects in perovskites, have given excellent opportunities to tune perovskites' catalytic properties. Recently, lead (Pb) halide perovskite and their composites or heterojunction with other semiconductors, metal nanoparticles (NPs), metal complexes, graphene, and metal-organic frameworks (MOFs) have been well established for CO2 conversion. Besides, various halide perovskites have come under focus to avoid the toxicity of lead-based materials. Therefore, we reviewed the recent progress made by Pb and Pb-free halide perovskites in photo-assisted CO2 reduction into useful chemicals. We also discussed the importance of various factors like change in solvent, structure defects, and compositions in the fabrication of halide perovskites to efficiently convert CO2 into value-added products.

Integrated nano-architectured photocatalysts for photochemical CO2 reduction

Recent advances in nanotechnology, especially the development of integrated nanostructured materials, have offered unprecedented opportunities for photocatalytic CO2 reduction. Compared to bulk semiconductor photocatalysts, most of these nanostructured photocatalysts offer at least one advantage in areas such as photogenerated carrier kinetics, light absorption, and active surface area, supporting improved photochemical reaction efficiencies. In this review, we briefly cover the cutting-edge research activities in the area of integrated nanostructured catalysts for photochemical CO2 reduction, including aqueous and gas-phase reactions. Primarily explored are the basic principles of tailor-made nanostructured composite photocatalysts and how nanostructuring influences photochemical performance. Specifically, we summarize the recent developments related to integrated nanostructured materials for photocatalytic CO2 reduction, mainly in the following five categories: carbon-based nano-architectures, metal-organic frameworks, covalent-organic frameworks, conjugated porous polymers, and layered double hydroxide-based inorganic hybrids. Besides the technical aspects of nanostructure-enhanced catalytic performance in photochemical CO2 reduction, some future research trends and promising strategies are addressed.

2D layered all-inorganic halide perovskites: recent trends in their structure, synthesis and properties

Recently, halide perovskites have appeared as a superior class of materials for diverse applications, mainly in optoelectronics and photovoltaics. Perovskite halides are broadly classified as hybrid organic-inorganic and all-inorganic analogues depending on the chemical nature of the A cation in the ABX3-type structure. Immense progress has already been achieved in halide perovskites focusing mainly on the hybrid equivalents and all-inorganic three-dimensional (3D) structures, however all-inorganic two-dimensional (2D) layered halide perovskites are relatively new and their nanostructures have gained significant attention in the last few years. In this minireview, we presented a discussion on the recently developed all-inorganic 2D layered halide perovskites highlighting their crystal structure, synthetic methodologies, chemical transformations, and optical properties. We have demonstrated a significant number of examples of Pb-free 2D halide perovskite nanostructures. Strategies for the shape-controlled synthesis of nanostructures and their excitonic properties are discussed in detail. Thermal conductivity and thermoelectric properties are emphasized along with the magnetic properties of layered transition-metal based perovskites. We have also mentioned the recent examples of all-inorganic 2D halide perovskites as photocatalysts for solar-driven CO2 reduction. Finally, we have concluded the article with an outlook for the further progress in 2D all-inorganic halide perovskites toward the structural diversity and prospective new applications.

Recent Progress in Engineering Metal Halide Perovskites for Efficient Visible-Light-Driven Photocatalysis

Artificial photosynthesis has attracted increasing attention due to recent environmental and energy concerns. Metal halide perovskites (MHPs) demonstrating excellent optoelectronic properties have currently emerged as novel and efficient photocatalytic materials. Herein, the structural features of MHPs that are responsible for the photoinduced charge separation and charge migration properties are briefly introduced, and then important and necessary photophysical and photochemical aspects of MHPs related to photoredox catalysis are summarized. Subsequently, the applications of MHPs for solar energy harvesting and photocatalytic conversion, including H₂ evolution, CO₂ reduction, degradation of organic pollutants, and photoredox organic synthesis, are extensively demonstrated, with a focus on strategies for improving the performance (e.g., selectivity, activity, stability, recyclability, and environmental compatibility) of these MHP-based photocatalytic systems. To conclude, existing challenges and prospects on the future development of MHP-based materials towards photoredox catalysis applications are detailed.