Activating a hematite nanorod photoanode via fluorine-doping and surface fluorination for enhanced oxygen evolution reaction

Hollow-structured cobalt sulfide electrocatalyst for alkaline oxygen evolution reaction: Rational tuning of electronic structure using iron and fluorine dual-doping strategy

Utilizing renewable electricity for water electrolysis offers a promising way for generating high-purity hydrogen gases while mitigating the emission of environmental pollutants. To realize the water electrolysis, it is necessary to develop highly active and precious metal-free electrocatalyst for oxygen evolution reaction (OER) which incurs significant overpotential due to its complicated four-electron transfer mechanism. Hence, we propose a facile preparation method for hollow-structured Fe and F dual-doped CoS2 nanosphere (Fe-CoS2-F) as an efficient OER electrocatalyst. The uniform hollow and porous structure of Fe-CoS2-F enlarge the specific surface area and increase the number of exposed active sites. Furthermore, the Fe and F dual-dopants synergistically contributed to the adjustment of electronic structure, thereby promoting the adsorption/desorption of oxygen-containing reaction intermediates on active sites during the alkaline OER procedure. As a result, the prepared Fe-CoS2-F exhibits outstanding OER activity, characterized by a low overpotential of 298 mV to achieve a current density of 10 mA cm-2 and a Tafel slope as small as 46.0 mV dec-1. Based on computational theoretical calculations, the introduction of the dual-dopants into CoS2 structure reduce the excessively strong adsorption energy of reaction intermediate in the rate determining step, leading to effectively promoted electrocatalytic cycle for OER in alkaline environment. This study presents an effective strategy for preparing noble metal-free OER electrocatalysts with promising potential for large-scale industrial water electrolysis.

Roles of Cobalt-Coordinated Polymeric Perylene Diimide in Hematite Photoanodes for Improved Water Oxidation

Interfacial charge recombination is a permanent issue that impedes the photon energy utilization in photoelectrochemical (PEC) water splitting. Herein, a conjugated polymer, urea linked perylene diimide polymer (PDI), is introduced to the designation of hematite-based composite photoanodes. On account of its unique molecule structure with abundant electronegative atoms, the O and N atoms with lone electron pairs can bond with Fe atoms at the surface of Zr4+ doped α-Fe2 O3 (Zr:Fe2 O3 ) and thus establish charge transfer channels for expediting hole separation and migration. Meanwhile, PDI molecules can passivate the surface states in Zr:Fe2 O3 , which is in favor of suppressing carrier recombination. Particularly, Co2+ is used to coordinate with PDI (Co-PDI) to accelerate hole extraction as well as utilization, and the as-obtained Co-PDI form type-II heterojunction with Zr:Fe2 O3 . Such a photoanode configuration takes advantage of the unique molecule structure of PDI, and the target Co-PDI/Zr:Fe2 O3 photoanodes eventually attain a photocurrent density of 2.17 mA cm-2 , which is inspirational for unearthing the potential use of conjugative molecules in PEC fields.

CoMoO4-modified hematite with oxygen vacancies for high-efficiency solar water splitting

Hematite is a potential photoelectrode for photoelectrochemical (PEC) water splitting. Nevertheless, its water oxidation efficiency is highly limited by its significant photogenerated carrier recombination, poor conductivity and slow water oxidation kinetics. Herein, under low-vacuum (LV) conditions, we fabricated a CoMoO₄ layer on oxygen-vacancy-modified hematite (CoMo-Fe₂O₃ (LV)) for the first time for efficient solar water splitting. The existence of oxygen vacancies can significantly facilitate the electrical conductivity, while the large onset potential along with oxygen vacancies can be lowered by the CoMoO₄ with accelerated water oxidation kinetics. Therefore, a high photocurrent density of 3.53 mA cm^-2 at 1.23 V_RHE was obtained for the CoMo-Fe₂O₃ (LV) photoanode. Moreover, it can be further coupled with the FeNiOOH co-catalyst to reach a benchmark photocurrent of 4.18 mA cm^-2 at 1.23 V_RHE, which is increased around 4-fold compared with bare hematite (0.90 mA cm^-2). The combination of CoMoO₄, FeNiOOH, and oxygen vacancies may be used as a reasonable strategy for developing high-efficiency hematite-based photoelectrodes for solar water oxidation.

Enabling high low-bias performance of Fe2O3 photoanode for photoelectrochemical water splitting

Fe₂O₃ is a promising photoanode material used for photoelectrochemical water splitting due to its narrow bandgap and excellent stability in solution. However, because the nanorods shrink and coalesce when annealed under high temperatures, the charge separation and injection efficiencies are suppressed in the conventional nanocoral Fe₂O₃, resulting in its high bias potential and low photocurrent density. Herein, by improving the radial growth of FeOOH precursor, highly dispersed Fe₂O₃ nanorods could be prepared. It enabled them to have sufficient light-harvesting and short charge transport distance, high light absorption and charge separation/injection efficiencies, increased photocurrent density and reduced onset potential V_on. The optimized Fe₂O₃ photoanodes obtained a remarkable low-bias photocurrent density of 0.84 mA cm^-2 at 1.0 V versus reversible hydrogen electrode (vs. RHE). It was further improved to 1.36 mA cm^-2 at 1.0 V vs. RHE with the V_on reduced to 0.50 V vs. RHE when post-treated with a solvothermal method and loaded with NiOOH/FeOOH cocatalysts. The applied bias photo-to-current conversion efficiency was maximized to 0.45% at 0.84 V vs. RHE.

Dual-doping in the bulk and the surface to ameliorate the hematite anode for photoelectrochemical water oxidation

Aiming at the drawbacks of hematite like poor conductivity and tardy oxidation kinetics, herein, we utilized dual dopants in the bulk and surface to ameliorate the situation. Specifically, doping optimal amount of Zr⁴⁺ in the hematite (Zr:Fe₂O₃) enhances the conductivity of hematite due to the higher charge carrier density. Further, F:FeOOH could form p-n heterojunction in bulk where a potential barrier is built up that repels electrons but prompts holes transferring to F:FeOOH for water oxidation. What's more, the high electronegative of F^- would withdraw electron from the Fe site in FeOOH, and the enhanced positive electricity of Fe³⁺ is beneficial for adsorption of OH^- as well as enhance the conductivity of FeOOH to expedite holes transfer. As a result, the composite photoanode (F:FeOOH/Zr:Fe₂O₃) shows a 3.25-times enhanced photocurrent density comparing with α-Fe₂O₃. The special designation employs ultrathin F:FeOOH to act as both p-type semiconductor and efficient co-catalyst, avoiding redundant layer that would extend the migration distance of holes. On the top of that, the dual modification approach provides an extensive prospect for the further application of hematite.

Bifunctional citrate-Ni0.9Co0.1(OH)x layer coated fluorine-doped hematite for simultaneous hole extraction and injection towards efficient photoelectrochemical water oxidation

Surface modification by loading a water oxidation co-catalyst (WOC) is generally considered an efficient means to optimize the sluggish surface oxygen evolution reaction (OER) of a hematite photoanode for photoelectrochemical (PEC) water oxidation. However, the surface WOC usually exerts little impact on the bulk charge separation of hematite. Herein, an ultrathin citrate-Ni_0.9Co_0.1(OH)_x [Cit-Ni_0.9Co_0.1(OH)_x] is conformally coated on the fluorine-doped hematite (F-Fe₂O₃) photoanode for PEC water oxidation to simultaneously promote the internal hole extraction and surface hole injection of the target photoanode. Besides, the conformally coated Cit-Ni_0.9Co_0.1(OH)_x overlayer passivates the redundant surface trap states of F-Fe₂O₃. These factors result in a superior photocurrent density of 2.52 mA cm^-2 at 1.23 V versus a reversible hydrogen electrode (V vs. RHE) for the target photoanode. Detailed investigation manifests that the hole extraction property in Cit-Ni_0.9Co_0.1(OH)_x is mainly derived from the Ni sites, while Co incorporation endows the overlayer with more catalytic active sites. This synergistic effect between Ni and Co contributes to a rapid and continuous hole migration pathway from the bulk to the interface of the target photoanode, and then to the electrolyte for water oxidation.

Facile Fabrication of a Highly Crystalline and Well-Interconnected Hematite Nanoparticle Photoanode for Efficient Visible-Light-Driven Water Oxidation

Facile and scalable fabrication of α-Fe₂O₃ photoanodes using a precursor solution containing Fe^III ions and 1-ethylimidazole (EIm) in methanol was demonstrated to afford a rigidly adhered α-Fe₂O₃ film with a controllable thickness on a fluorine-doped tin oxide (FTO) substrate. EIm ligation to Fe^III ions in the precursor solution brought about high crystallinity of three-dimensionally well-interconnected nanoparticles of α-Fe₂O₃ upon sintering. This is responsible for the 13.6 times higher photocurrent density (at 1.23 V vs reference hydrogen electrode (RHE)) for photoelectrochemical (PEC) water oxidation on the α-Fe₂O₃ (w-α-Fe₂O₃) photoanode prepared with EIm compared with that (w/o-α-Fe₂O₃) prepared without EIm. The w-α-Fe₂O₃ photoanode provided the highest charge separation efficiency (η_sep) value of 27% among the state-of-the-art pristine α-Fe₂O₃ photoanodes, providing incident photon-to-current conversion efficiency (IPCE) of 13% at 420 nm and 1.23 V vs RHE. The superior η_sep for the w-α-Fe₂O₃ photoanode is attributed to the decreased recombination of the photogenerated charge carriers at the grain boundary between nanoparticles, in addition to the higher number of the catalytically active sites and the efficient bulk charge transport in the film, compared with w/o-α-Fe₂O₃.

In Situ Synthesis of α-Fe2O3/Fe3O4 Heterojunction Photoanode via Fast Flame Annealing for Enhanced Charge Separation and Water Oxidation

Hematite (α-Fe₂O₃) is a promising photoanode material in photoelectrochemical (PEC) water splitting. To further improve the catalytic activity, a reasonable construction of heterojunction and surface engineering can effectively improve the photoanode PEC water-splitting performance via improving bulk carrier transport and interfacial charge-transfer efficiency. As Fe₃O₄ has an excellent conductivity and a suitable energy band position, α-Fe₂O₃/Fe₃O₄ heterojunction can be an ideal structure to improve the activity of α-Fe₂O₃. However, only few studies have been reported on α-Fe₂O₃/Fe₃O₄ heterojunctions as photoanodes. In this work, a holey nanorod Fe₂O₃/Fe₃O₄ heterojunction photoanode with oxygen vacancies was fabricated using a rapid and facile flame reduction treatment. Compared with pure Fe₂O₃, the water oxidation performance of the Fe₂O₃/Fe₃O₄ photoanode is improved by ninefold at 1.23 V_RHE. Our study revealed that the porous nanorod structure providing more active sites and oxygen vacancies as the hole transfer medium, together improve the interface charge transfer performance of the photoanode. At the same time, Fe₃O₄ can form a Fe₂O₃/Fe₃O₄ heterojunction to improve the carrier separation efficiency. More importantly, Fe₃O₄ can serve as active sites, solving the slow water oxidation kinetic problem of hematite to enhance the catalytic activity. Our work shows that when flame acts on precursors containing oxygen or hydroxide, it is easy to form compounds with different microstructures or compositions in situ.

Solvothermal phase change induced morphology transformation in CdS/CoFe2O4@Fe2O3 hierarchical nanosphere arrays as ternary heterojunction photoanodes for solar water splitting

The design of efficient heterojunction photoanodes with appropriate band alignment and ease of charge separation has been one of the most highly focused research areas in photoelectrodes.

A nano-surface monocrystalline BiVO4 nanoplate photoanode for enhanced photoelectrochemical performance

A nano-surface monocrystalline BiVO₄ photoanode with a large surface area is prepared by a low-cost and simple etching process.

Heteroatom Doping Strategy for Establishing Hematite Homojunction as Efficient Photocatalyst for Accelerating Water Splitting

Hematite (α-Fe₂ O₃ ) is one of the promising photocatalysts for water oxidation, owing to its stable, abundant and visible-light responsive features. Enhancing electrical conductivity and accelerating oxidation evolution kinetics are expected to improve photocatalytic ability of hematite toward water oxidation. In this work, strategies of doping heteroatoms and developing pn homojunction are adopted to enhance the photocatalytic ability of hematite electrodes. The Ti and Mg dopants are separately incorporated in two layers of hematite electrodes via two-step hydrothermal reaction and one-step annealing process. The effect of regrowth time for synthesizing Mg-doped hematite on the photoelectrochemical performance of Mg-doped and Ti-doped hematite (Mg-Fe₂ O₃ /Ti-Fe₂ O₃ ) electrode is studied. The size of rod-like structure and gaps in-between play important roles on the photocatalytic ability of Mg-Fe₂ O₃ /Ti-Fe₂ O₃ . The optimized Mg-Fe₂ O₃ /Ti-Fe₂ O₃ electrode is prepared by using merely 10 min for synthesizing the Mg-doped hematite top layer, which shows the highest photocurrent density of 2.83 mA/cm² at 1.60 V_RHE along with the highest carrier density of 5.89×10¹⁶  cm^-3 and the smallest charge-transfer resistance. This largely improved photoelectrochemical performance is attributed to the more donor generation with heteroatom-doping and more efficient charge cascade with homojunction establishment. Other p-type metals are encouraged to dope in hematite as the second layer to couple with the n-type Ti-doped hematite for developing efficient pn homojunction and improve the photocatalytic ability of hematite in the near future.

Efficient SO2 Removal and Highly Synergistic H2O2 Production Based on a Novel Dual-Function Photoelectrocatalytic System

The direct conversion of SO₂ to SO₃ is rather difficult for flue gas desulfurization due to its inert dynamic with high reaction activation energy, and the absorption by wet limestone-gypsum also needs the forced oxidation of O₂ to oxidize sulfite to sulfate, which is necessary for additional aeration. Here, we propose a method to remove SO₂ with highly synergistic H₂O₂ production based on a novel dual-function photoelectrocatalytic (PEC) system in which the jointed spontaneous reaction of desulfurization and H₂O₂ production was integrated instead of nonspontaneous reaction of O₂ to H₂O₂. SO₂ was absorbed by alkali liquor then oxidized quickly into SO₄^2- by a nanorod α-Fe₂O₃ photoanode, which possessed high alkali corrosion resistance and electron transport properties. H₂O₂ was produced simultaneously in the cathode chamber on a gas diffusion electrode and was remarkably boosted by the conversion reaction of SO₃^2- to SO₄^2- in the anode chamber in which the released chemical energy was effectively used to increase H₂O₂. The photocurrent density increased by 40% up to 1.2 mA·cm^-2, and the H₂O₂ evolution rate achieved 58.8 μmol·L^-1·h^-1·cm^-2 with the synergistic treatment of SO₂, which is about five times than that without SO₂. This proposed PEC cell system offers a cost-effective and environmental-benign approach for dual purpose of flue gas desulfurization and simultaneous high-valued H₂O₂ production.

Boosting the Cycling Stability of Aqueous Flexible Zn Batteries via F Doping in Nickel-Cobalt Carbonate Hydroxide Cathode

Cathodes of rechargeable Zn batteries typically face the issues of irreversible phase transformation, structure collapse, and volume expansion during repeated charge/discharge cycles, which result in an increased transfer resistance and poor long-term cycling stability. Herein, a facile F doping strategy is developed to boost the cycling stability of nickel cobalt carbonate hydroxide (NiCo-CH) cathode. Benefiting from the extremely high electronegativity, the phase and morphology stabilities as well as the electrical conductivity of NiCo-CH are remarkably enhanced by F incorporation (NiCo-CH-F). Phase interface and amorphous microdomains are also introduced, which are favorable for the electrochemical performance of cathode. Benefiting from these features, NiCo-CH-F delivers a high capacity (245 mA h g^-1 ), excellent rate capability (64% retention at 8 A g^-1 ), and outstanding cycling stability (maintains 90% after 10 000 cycles). Moreover, the quasi-solid-state battery also manifests superior cycling stability (maintains 90% after 7200 cycles) and desirable flexibility. This work offers a general strategy to boost the cycling stability of cathode materials for aqueous Zn batteries.