A three-dimensional porous CoSnS@CNT nanoarchitecture as a highly efficient bifunctional catalyst for boosted OER performance and photocatalytic degradation

A novel GO hoisted SnO2-BiOBr bifunctional catalyst for the remediation of organic dyes under illumination by visible light and electrocatalytic water splitting

It is imperative to develop affordable multi-functional catalysts based on transition metals for various applications, such as dye degradation or the production of green energy. For the first time, we propose a simple chemical bath method to create a SnO2-BiOBr-rGO heterojunction with remarkable photocatalytic and electrocatalytic activities. After introducing graphene oxide (GO) into the SnO2-BiOBr nanocomposite, the charge separation, electron mobility, surface area, and electrochemical properties were significantly improved. The X-ray diffraction results show the successful integration of GO into the SnO2-BiOBr nanocomposite. Systematic material characterization by scanning and transmission electron microscopy showed that the photocatalysts are composed of uniformly distributed SnO2 nanoparticles (∼11 nm) on the regular nanosheets of BiOBr (∼94 nm) and rGO. The SnO2-BiOBr-rGO photocatalyst has outstanding photocatalytic activity when it comes to reducing a variety of organic dyes like rhodamine B (RhB) and methylene blue (MB). Within 90 minutes of visible light illumination, degradation of a maximum of 99% for MB and 99.8% for RhB was noted. The oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performance was also tested for the ternary nanocomposite, and significantly lower overpotential values of 0.34 and -0.11 V (vs. RHE) at 10 mA cm-2 were observed for the OER and HER, respectively. Furthermore, the Tafel slope values are 34 and 39 mV dec-1 for the OER and HER, respectively. The catalytic degradation of dyes with visible light and efficient OER and HER performance offer this work a broad spectrum of potential applications.

Heterointerface promoted trifunctional electrocatalysts for all temperature high-performance rechargeable Zn-air batteries

The rational design of wide-temperature operating Zn-air batteries is crucial for their practical applications. However, the fundamental challenges remain; the limitation of the sluggish oxygen redox kinetics, insufficient active sites, and poor efficiency/cycle lifespan. Here we present heterointerface-promoted sulfur-deficient cobalt-tin-sulfur (CoS_1-δ/SnS_2-δ) trifunctional electrocatalysts by a facile solvothermal solution-phase approach. The CoS_1-δ/SnS_2-δ displays superb trifunctional activities, precisely a record-level oxygen bifunctional activity of 0.57 V (E_1/2 = 0.90 V and E_j=10 = 1.47 V) and a hydrogen evolution overpotential (41 mV), outperforming those of Pt/C and RuO₂. Theoretical calculations reveal the modulation of the electronic structures and d-band centers that endorse fast electron/proton transport for the hetero-interface and avoid the strong adsorption of intermediate species. The alkaline Zn-air batteries with CoS_1-δ/SnS_2-δ manifest record-high power density of 249 mW cm^-2 and long-cycle life for >1000 cycles under harsh operations of 20 mA cm^-2, surpassing those of Pt/C + RuO₂ and previous state-of-the-art catalysts. Furthermore, the solid-state flexible Zn-air battery also displays remarkable performance with an energy density of 1077 Wh kg^-1, >690 cycles for 50 mA cm^-2, and a wide operating temperature from +80 to -40 °C with 85% capacity retention, which provides insights for practical Zn-air batteries.

Modulating the electronic structure of CoS2 by Sn doping boosting urea oxidation for efficient alkaline hydrogen production

Urea electrocatalytic oxidation afforded by renewable energies is highly promising to replace the sluggish oxygen evolution reaction in water splitting for hydrogen production while realizing the treatment of urea-rich waste water. Therefore, the development of efficient and cost-effective catalysts for water splitting assisted by urea is highly desirable. Herein, Sn-doped CoS₂ electrocatalysts were reported with the engineered electronic structure and the formation of Co-Sn dual active sites for urea oxidation reaction (UOR) and hydrogen evolution reaction (HER), respectively. Consequently, the number of active sites and the intrinsic activity were enhanced simultaneously and the resultant electrodes exhibited outstanding electrocatalytic activity with a very low potential of 1.301 V at 10 mA·cm^-2 for UOR and an overpotential of 132 mV at 10 mA·cm^-2 for HER. Therefore, a two-electrode device was assembled by employing Sn(2)-CoS₂/CC and Sn(5)-CoS₂/CC and the constructed cell required only 1.45 V to approach a current density of 10 mA·cm^-2 along with good durability for at least 95 h assisted by urea. More importantly, the assembled electrolyzer can be powered by commercial dry battery to generate numerous gas bubbles on the surface of the electrodes, demonstrating the high potential of the as-fabricated electrodes for applications in hydrogen production and pollutant treatment at a low-voltage electrical energy input.

Hierarchical Ultrathin Layered GO-ZnO@CeO2 Nanohybrids for Highly Efficient Methylene Blue Dye Degradation

Highly efficient interfacial contact between components in nanohybrids is a key to achieving great photocatalytic activity in photocatalysts and degradation of organic model pollutants under visible light irradiation. Herein, we report the synthesis of nano-assembly of graphene oxide, zinc oxide and cerium oxide (GO-ZnO@CeO₂) nanohybrids constructed by the hydrothermal method and subsequently annealed at 300 °C for 4 h. The unique graphene oxide sheets, which are anchored with semiconducting materials (ZnO and CeO₂ nanoparticles), act with a significant role in realizing sufficient interfacial contact in the new GO-ZnO@CeO₂ nanohybrids. Consequently, the nano-assembled structure of GO-ZnO@CeO₂ exhibits a greater level (96.66%) of MB dye degradation activity than GO-ZnO nanostructures and CeO₂ nanoparticles on their own. This is due to the thin layers of GO-ZnO@CeO₂ nanohybrids with interfacial contact, suitable band-gap matching and high surface area, preferred for the improvement of photocatalytic performance. Furthermore, this work offers a facile building and cost-effective construction strategy to synthesize the GO-ZnO@CeO₂ nanocatalyst for photocatalytic degradation of organic pollutants with long-term stability and higher efficiency.

Optimized nano-metal particles filled into carbon nanohorns to achieve high N-doping amount and high porosity for enhanced oxygen evolution reaction

Nano-metal-filled N-doped carbon materials have been actively verified as promising alternatives for precious-metal catalysts in the oxygen evolution reaction (OER). Herein, Ni/Fe/Cu-filled N-doped carbon nanohorns (CNHs) are synthesized via a positive pressure assisted arc discharge method using a Ni/Fe/Cu rod charged in an anode hole in a N₂ and Ar mixture. We first found that the amount of N atom doping can be controlled by the types of nano-metal particles encapsulated by CNHs. The content of N atoms on CNHs uniquely depended on the initial Ni wires inserted into the anode graphite; increasing the number of Ni wires induced the enrichment of N atoms until 3.56 at%, whereas the content of N atoms for Cu- and Fe-filled CNHs is against the results; loading Cu and Fe nanoparticles decreases the N-doping amount. And the morphologies and N-configurations can be changed by the types of metal nanoparticles. Furthermore, the OER performance of Ni-filled CNHs is much superior to that of Cu- and Fe-filled CNHs, which can be significantly enhanced by the tip opening structure, and the increase in Ni loading amount and the N atom content.

The Ni-filled CNHs achieve excellent OER performance, attributing to the high N-doping amount and high porosity of CNHs.

Template free-synthesis of cobalt-iron chalcogenides [Co0.8Fe0.2L2, L = S, Se] and their robust bifunctional electrocatalysis for the water splitting reaction and Cr(vi) reduction

The ease of production of materials and showing multiple applications are appealing in this modern era of advanced technology. This paper reports the synthesis of a pair of novel cobalt–iron chalcogenides [Co_0.8Fe_0.2S₂ and Co_0.8Fe_0.2Se₂] with enhanced electro catalytic activities. These ternary metal chalcogenides were synthesized by a one-step template-free approach via a hexamethyldisilazane (HMDS)-assisted synthetic method. Transient photocurrent (TPC) studies and electrochemical impedance spectra (EIS) of these materials showed free electron mobility. Their bifunctional activities were verified in both the electrochemical oxygen evolution reaction (OER) and in the electrochemical reduction of toxic inorganic heavy metal ions [Cr(vi)] in polluted water. The materials showed robust catalytic ability in the oxygen evolution reaction with minimum possible over potential (345 and 350 mV @ η10) as determined by linear sweep voltammetry and the lower Tafel values (52.4 and 84.5 mV dec⁻¹) for Co_0.8Fe_0.2Se₂ and Co_0.8Fe_0.2S₂ respectively. Surprisingly, both the materials also showed an excellent activity towards electrochemical Cr(vi) reduction to Cr(iii). Besides the maximum current achieved for Co_0.8Fe_0.2S₂, a minimum value for the Limit of detection (LOD) was obtained for Co_0.8Fe_0.2S₂ (0.159 μg L⁻¹) compared to Co_0.8Fe_0.2Se₂ (0.196 μg L⁻¹). We tested the durability of catalysts, the critical factor for the prolonged use of catalysts, through the recyclability measurements of these materials as catalysts. Both the catalysts presented outstanding durability and balanced electro catalytic activities for up to 1500 CV cycles, and chronoamperometry studies also confirmed exceptional stability. The enhanced catalytic activities of these materials are ascribed to the free electron movement, evidenced by the increased TPC measured and EIS. Therefore, the template-free synthesis of these electro catalysts containing non-noble metal illustrates the practical approach to develop such types of catalysts for multiple functions.

The ease of production of materials and showing multiple applications are appealing in this modern era of advanced technology. Cobalt–iron chalcogenides showing multiple application is reported.

Facile metal-free synthesis of pyrrolo[3,2-b]pyrrolyl-based conjugated microporous polymers for high-performance photocatalytic degradation of organic pollutants

An efficient and metal-free approach to the synthesis of new kinds of CMPs (pyrrolo[3,2-b]pyrrolyl-based CMPs) on a gram scale within a short time has been developed for remarkable adsorbent and photocatalytic degradation of organic pollutants.

Optimized Nanopores Opened on N-Doped Carbon Nanohorns Filled with Fe/Fe2O3 Nanoparticles as Advanced Electrocatalysts for the Oxygen Evolution Reaction

N-doped carbon nanohorns filled with Fe nanoparticles (Fe-N-CNHs) were produced by one-step positive pressure-assisted arc discharge in the Ar and N₂ mixture. After oxidation treatments in air, Fe was converted into Fe₂O₃, and nanopores were opened on CNHs from 1 to 5 nm controlled by oxidation temperature. Fe-N-CNHs oxidized in O₂ at 550 °C (Fe₂O₃-N-CNH550ox) show 245 mV at 20 mA cm^-1, which is much smaller than that of the ones oxidized at 500 °C (Fe₂O₃-N-CNH500ox), contributing to the larger pore size on CNHs (3-5 nm vs 2-3 nm) and a larger number of nanopores caused by the enhanced sidewall nanopores. However, the stability of Fe₂O₃-N-CNH550ox becomes much poorer than that of Fe₂O₃-N-CNH500ox after 2000 cycles. The unique relationship between the overpotential and long-term stability can be explained by the consideration of the size of Fe₂O₃ nanoparticles and nanopores on CNHs. Furthermore, the stability for Fe₂O₃-N-CNH550ox can be rapidly increased after heat treatment in Ar for 1 h caused by shrinking the size of tip nanopores. Herein, we first reveal that the performance of OER is related to the nanopore size of carbon carriers and the catalyst of nanometal particles. The optimization of pore-opening conditions in carbon carriers can be achieved a superior electrocatalytic OER performance, including a low overpotential at high current density and long-term stability.

Three-dimensional porous MoS2 nanobox embedded g-C3N4@TiO2 architecture for highly efficient photocatalytic degradation of organic pollutant

Herein, a simple, highly efficient and stable MoS₂ nanobox embedded graphitic-C₃N₄@TiO₂ (g-CN@TiO₂) nanoarchitecture was synthesized by a facile solvothermal approach. The nano-hybrid photocatalyst was constructed by TiO₂ nanoparticles anchored on the surface of g-CN nanosheets. Then highly crystalline three-dimensional porous MoS₂ nanobox was homogeneously distributed on the g-CN@TiO₂ surface. The g-CN@TiO₂/MoS₂ hybrid achieved a high photocatalytic degradation efficiency of 97.5% for methylene blue (MB) dye pollutant under visible-light irradiant in an hour which was much better than TiO₂@MoS_2, g-CN@TiO_2, MoS_2, TiO₂ and g-CN. Furthermore, the reaction rate (k) value of g-CN@TiO₂/MoS₂ for MB dye is as high as 3.18 X 10^-2 min^-1, which is ~ 2.65 times better than those of g-CN@TiO₂ and MoS₂. This work presents a rational structure design, interfacial construction and suitable band gap strategy to synthesize advanced nano-hybrid photocatalyst for degradation of organic pollutant with excellent performance and long-term stability.

Hierarchical ultrathin layered MoS2@NiFe2O4 nanohybrids as a bifunctional catalyst for highly efficient oxygen evolution and organic pollutant degradation

Rational design and highly efficient dual-functional catalyst are still difficult to develop for electrocatalytic oxygen evolution reaction and degradation of RhB dye pollutant. Herein, we report a highly efficient "bandgap matching and interfacial coupling" strategy to synthesize nano-assembled ultrathin layered MoS₂@NiFe₂O₄ (MS@NiFeO) bifunctional catalyst constructed by the hydrothermal route and subsequently amine-hydrolysis. The OER performance of the prepared MS@NiFeO catalyst delivers a low overpotential of 290 mV at 10 mA/cm² and Tafel slope is 69.2 mV dec^-1 in an alkaline solution. In addition, the nano-assembled ultrathin layered structure of MS@NiFeO showed a highly efficient (96.37%) RhB dye degradation performance than that of MoS₂ nanosheets and NiFe₂O₄ nanostructures. Unique nanostructure of ultrathin layered MS@NiFeO with suitable band matching, interfacial charge transfer, high surface area and more active sites favored for the enhancement of the catalytic activity. This work presents an unpretentious construction and low-cost production strategy to synthesize bifunctional hybrid catalyst for oxygen evolution reaction as well as degradation of organic pollutant with superior efficiency and longer stability.

Metal-organic frameworks-derived hollow dodecahedral carbon combined with FeNx moieties and ruthenium nanoparticles as cathode electrocatalyst for lithium oxygen batteries

Owing to their high energy density, lithium-oxygen batteries (LOBs) have been drawn great attention as one of the promising electrochemical energy sources. However, the sluggish kinetics of oxygen reduction/evolution reaction (ORR/OER) hamper the widespread application of LOBs. Herein, an elaborate designed catalysts which are constructed by FeN_x moieties dispersed on the network-like hollow dodecahedral carbon and then decorated with Ru nanoparticles (FeN_x-HDC@Ru). Since the homogeneously dispersed FeN_x moieties could promote ORR performance, and the Ru nanoparticles could facilitate OER capability, the FeN_x-HDC@Ru nanocomposites used as cathode catalysts can significantly improve LOBs performance. A lower discharge and charge overpotentials of 0.15 V and 0.78 V can be detected in the first cycle, respectively, and an excellent cycle performance of 90 cycles at 200 mA g^-1 and 89 cycles at 500 mA g^-1 can be demonstrated. Herein, the charge transfer kinetics has been enhanced with the internal network-like hollow structure and a low impedance Li₂O₂/catalysts contact interface could be earned by the constructed Ru nanoparticles, these factors would lead to an efficient acceleration to the formation and decomposition of Li₂O₂ during discharge and charge process.

Strong Electronic Interaction Enhanced Electrocatalysis of Metal Sulfide Clusters Embedded Metal-Organic Framework Ultrathin Nanosheets toward Highly Efficient Overall Water Splitting

Unique metal sulfide (MS) clusters embedded ultrathin nanosheets of Fe/Ni metal-organic framework (MOF) are grown on nickel foam (NiFe-MS/MOF@NF) as a highly efficient bifunctional electrocatalyst for overall water splitting. It exhibits remarkable catalytic activity and stability toward both the oxygen evolution reaction (OER, ƞ = 230 mV at 50 mA cm-2) and hydrogen evolution reaction (HER, ƞ = 156 mV at 50 mA cm-2) in alkaline media, and bi-functionally catalyzes overall alkaline water splitting at a current density of 50 mA cm-2 by 1.74 V cell voltage without iR compensation. The enhancement mechanism is ascribed to the impregnated metal sulfide clusters in the nanosheets, which not only promote the formation of ultrathin nanosheet to greatly enlarge the reaction surface area while offering high electric conductivity, but more importantly, efficiently modulate the electronic structure of the catalytically active atom sites to an electron-rich state via strong electronic interaction and strengthen the adsorption of oxygenate intermediate to facilitate fast electrochemical reactions. This work reports a highly efficient HER/OER bifunctional electrocatalyst and may shed light on the rational design and synthesis of uniquely structured MOF-derived catalysts.

Hybrid Materials Based on Carbon Nanotubes and Nanofibers for Environmental Applications

With the advances in material science, hybrid nanomaterials with unique mechanical, electrical, thermal and optical characteristics have been developed. Among them, hybrids based on filamentous forms of carbon, such as carbon nanotubes and carbon nanofibers, in combination with inorganic nanoparticles attract particular attention. Due to the structure and morphology, charge and energy transfer processes lead to synergistic effects that allow the use of less material with higher productivity. To clarify these issues, this review will summarize and discuss the relevant studies of the use of inorganic compounds of various chemical groups in modifying carbon nanomaterials for ecological applications.