Amorphous nickel sulfide nanoparticles anchored on N-doped graphene nanotubes with superior properties for high-performance supercapacitors and efficient oxygen evolution reaction

Hydrothermal nickel selenides as efficient electrodes in alkaline media: application to supercapacitors and the methanol oxidation reaction

The advancement of active electrochemical materials is pivotal for enhancing energy conversion and storage technologies, which is essential for a sustainable future. Furthermore, achieving cost-effective technologies necessitates avoiding the use of noble metals and low-throughput processes that require high vacuum or high temperatures. Herein, we describe in detail a simple solution-based protocol to obtain a series of phase-controlled nickel selenide nanomaterials. The electrochemical performance of these materials, influenced by the phase and morphology, has been further analyzed. To showcase the application of these materials, two technologies are considered: (i) supercapacitors; and (ii) the methanol oxidation reaction (MOR). In particular, the Ni3Se4-based electrode in 1 M KOH shows an initial specific capacitance of 1903.5 F g-1 at a discharge current of 0.1 mA and displays a notable stability for over 3000 cycles. Furthermore, in an alkaline medium with methanol, this electrode produces a current density of 95.5 mA cm-2, facilitating methanol-to-formate conversion with a faradaic efficiency of up to 95.7% during a continuous 20-hour test. This research underscores the potential of nickel selenide nanomaterials in driving the next generation of energy storage and conversion technologies.

In Situ Photodeposition of Cobalt Phosphate (CoHxPOy) on CdIn2S4 Photocatalyst for Accelerated Hole Extraction and Improved Hydrogen Evolution

The ternary metal sulfide CdIn₂S₄ (CIS) has great application potential in solar-to-hydrogen conversion due to its suitable band gap, good stability and low cost. However, the photocatalytic hydrogen (H₂) evolution performance of CIS is severely limited by the rapid electron-hole recombination originating from the slow photogenerated hole transfer kinetics. Herein, by simply depositing cobalt phosphate (CoH_xPO_y, noted as Co-Pi), a non-precious co-catalyst, an efficient pathway for accelerating the hole transfer process and subsequently promoting the H₂ evolution reaction (HER) activity of CIS nanosheets is developed. X-ray photoelectron spectroscopy (XPS) reveals that the Co atoms of Co-Pi preferentially combine with the unsaturated S atoms of CIS to form Co-S bonds, which act as channels for fast hole extraction from CIS to Co-Pi. Electron paramagnetic resonance (EPR) and time-resolved photoluminescence (TRPL) showed that the introduction of Co-Pi on ultrathin CIS surface not only increases the probability of photogenerated holes arriving the catalyst surface, but also prolongs the charge carrier's lifetime by reducing the recombination of electrons and holes. Therefore, Co-Pi/CIS exhibits a satisfactory photocatalytic H₂ evolution rate of 7.28 mmol g^-1 h^-1 under visible light, which is superior to the pristine CIS (2.62 mmol g^-1 h^-1) and Pt modified CIS (3.73 mmol g^-1 h^-1).

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Highly efficient and self-supported 3D carbon nanotube composite electrode for enhanced oxygen reduction reaction

A binder-free and self-supported 3D carbon nanotube composite electrode with NiFe nanoalloys, N doping and Fe/Ni-N x -C structures was fabricated by a facile method. The strong synergistic effects of multi-components and the unique structural merits of the optimized sample endowed it outstanding oxygen reduction reaction activity with an onset potential of 1.048 V vs. RHE in 0.1 M KOH solution.

Nickel Sulfide Microrockets as Self-Propelled Energy Storage Devices to Power Electronic Circuits "On-Demand"

Miniaturized energy storage devices are essential to power the growing number and variety of microelectronic technologies. Here, a concept of self-propelled microscale energy storage elements that can move, reach, and power electronic circuits is reported. Microrockets consisting of a nickel sulfide (NiS) outer layer and a Pt inner layer are prepared by template-assisted electrodeposition, and designed to store energy through NiS-mediated redox reactions and propel via the Pt-catalyzed decomposition of H₂ O₂ fuel. Scanning electrochemical microscopy allows visualizing and studying the energy storage ability of a single microrocket, revealing its pseudocapacitive nature. This proves the great potential of such technique in the field of micro/nanomotors. On-demand delivery of energy storage units to electronic circuits has been demonstrated by releasing microrockets on an interdigitated array electrode as an example of electronic circuit. Owing to their self-propulsion ability, they reach the active area of the electrode and, in principle, power its functions. These autonomously moving energy storage devices will be employed for next-generation electronics to store and deliver energy in previously inaccessible locations.

Flexible nickel disulfide nanoparticles-anchored carbon nanofiber hybrid mat as a flexible binder-free cathode for solid-state asymmetric supercapacitors

Nickel disulfide nanoparticles (NiS₂NPs)-anchored carbon nanofibers (NiS₂NPs@CNF) hybrid mats were fabricated via the sequential process of stabilization and carbonization of electrospun polyacrylonitrile-based fibers followed by hydrothermal growth of NiS₂NPs on the porous surface of CNFs. The vertical growth of NiS₂NPs on entire surfaces of porous CNFs appeared in the SEM images of hybrid mat. The hierarchical NiS₂NPs@CNF core-shell hybrid nanofibers with 3D interconnected network architecture can endow continuous channels for easy and rapid ionic diffusion to access the electroactive NiS₂NPs. The conductive and interconnected CNF core could facilitate electron transfer to the NiS₂shell. Moreover, the porous CNF as a buffering matrix can resist volumetric deformation during the long-term charge-discharge process. The NiS₂NPs@CNF electrode can yield high specific capacitance (916.3 F g^-1at 0.5 A g^-1) and reveal excellent cycling performances. The solid-state asymmetric supercapacitor (ASC) was fabricated with NiS₂NPs@CNF mat as a binder-free positive electrode and activated carbon cloth as a negative electrode. As-assembled ASC not only produce high specific capacitance (364.8 F g^-1at 0.5 A g^-1) but also exhibit excellent cycling stability (∼92.8% after 5000 cycles). The ASC delivered a remarkably high energy density of 129.7 Wh kg^-1at a power density of 610 W kg^-1. These encouraging results could make this NiS₂NPs@CNF hybrid mat a good choice of cathode material for the fabrication of flexible solid-state ASC for various flexible/wearable electronics.

Recent Developments of Transition Metal Compounds-Carbon Hybrid Electrodes for High Energy/Power Supercapacitors

Due to their rapid power delivery, fast charging, and long cycle life, supercapacitors have become an important energy storage technology recently. However, to meet the continuously increasing demands in the fields of portable electronics, transportation, and future robotic technologies, supercapacitors with higher energy densities without sacrificing high power densities and cycle stabilities are still challenged. Transition metal compounds (TMCs) possessing high theoretical capacitance are always used as electrode materials to improve the energy densities of supercapacitors. However, the power densities and cycle lives of such TMCs-based electrodes are still inferior due to their low intrinsic conductivity and large volume expansion during the charge/discharge process, which greatly impede their large-scale applications. Most recently, the ideal integrating of TMCs and conductive carbon skeletons is considered as an effective solution to solve the above challenges. Herein, we summarize the recent developments of TMCs/carbon hybrid electrodes which exhibit both high energy/power densities from the aspects of structural design strategies, including conductive carbon skeleton, interface engineering, and electronic structure. Furthermore, the remaining challenges and future perspectives are also highlighted so as to provide strategies for the high energy/power TMCs/carbon-based supercapacitors.

Boosting the energy density of supercapacitors by encapsulating a multi-shelled zinc-cobalt-selenide hollow nanosphere cathode and a yolk-double shell cobalt-iron-selenide hollow nanosphere anode in a graphene network

The practical exploration of electrode materials with complex hollow structures is of considerable significance in energy storage applications. Mixed-metal selenides (MMSs) with favorable architectures emerge as new electrode materials for supercapacitor (SC) applications owing to their excellent conductivity. Herein, a facile and effective metal-organic framework (MOF)-derived strategy is introduced to encapsulate multi-shelled zinc-cobalt-selenide hollow nanosphere positive and yolk-double shell cobalt-iron-selenide hollow nanosphere negative electrode materials with controlled shell numbers in a graphene network (denoted as G/MSZCS-HS and G/YDSCFS-HS, respectively) for SC applications. Due to the considerable electrical conductivity and unique structures of both electrodes, the G/MSZCS-HS positive and G/YDSCFS-HS negative electrodes exhibit remarkable capacities (∼376.75 mA h g^-1 and 293.1 mA h g^-1, respectively, at 2 A g^-1), superior rate performances (83.4% and 74%, respectively), and an excellent cyclability (96.8% and 92.9%, respectively). Furthermore, an asymmetric device (G/MSZCS-HS//G/YDSCFS-HS) has been fabricated with the ability to deliver an exceptional energy density (126.3 W h kg^-1 at 902.15 W kg^-1), high robustness of 91.7%, and a reasonable capacity of 140.3 mA h g^-1.