Bridge engineering in photocatalysis and photoelectrocatalysis

Hollow Plasmonic P-Metal-N S-Scheme Heterojunction Photoreactor with Spatially Separated Dual Cocatalysts toward Artificial Photosynthesis

Semiconductor-based step-scheme (S-scheme) heterojunctions possess many merits toward mimicking natural photosynthesis. However, their applications for solar-to-chemical energy conversion are hindered by inefficient charge utilization and unsatisfactory surface reactivity. Herein, two synergistic protocols are demonstrated to overcome these limitations based on the construction of a hollow plasmonic p-metal-n S-scheme heterojunction photoreactor with spatially separated dual noble-metal-free cocatalysts. On one side, plasmonic Au, inserted into the heterointerfaces of CuS@ZnIn2 S4 core-shell nanoboxes, not only accelerates the transfer and recombination of useless charges, enabling a more thorough separation of useful ones for CO2 reduction and H2 O oxidation but also generates hot electrons and holes, respectively injects them into ZnIn2 S4 and CuS, further increasing the number of active carriers participating in redox reactions. On the other side, Fe(OH)x and Ti3 C2 cocatalysts, separately located on the CuS and ZnIn2 S4 surface, enrich the redox sites, adjust the reduction potential and pathway for selective CO2 -to-CH4 transformation, and balance the transfer and consumption of photocarriers. As expected, significantly enhanced activity and selectivity in CH4 production are achieved by the smart design along with nearly stoichiometric ratios of reduction and oxidation products. This study paves the way for optimizing artificial photosynthetic systems via rational interfacial channel introduction and surface cocatalyst modification.

Understanding the charge transfer dynamics of the Cu2WS4-CNT-FeOOH ternary composite for photo-electrochemical studies

Ternary transition metal chalcogenide (Cu2WS4) is a semiconductor with a band gap of 2.1 eV and could be a promising candidate for photoelectrochemical water splitting and solar energy conversion applications. Despite numerous reports on ternary transition metal chalcogenides, this semiconductor's ultrafast charge transfer dynamics remain unknown. Here, we report on charge carrier dynamics in a pristine Cu2WS4 system with the aid of ultrafast transient (TA) pump-probe spectroscopy and a hot carrier transfer process from Cu2WS4 to multi-walled carbon nanotubes (CNTs) and FeOOH has been observed. Furthermore, we have explored Cu2WS4-FeOOH having a type-II composite for photo-electrochemical (PEC) water oxidation and modified this with the addition of multi-walled carbon nanotubes to expedite the charge-transfer processes and photo-anodic performance. The photo-electrochemical studies demonstrate that the Cu2WS4-CNT, Cu2WS4-FeOOH, and Cu2WS4-CNT-FeOOH provide nearly 3-, 8- and 12-fold enhancement in photocurrent density relative to the bare Cu2WS4 photo-anode at 1.23 V vs. RHE. These photo-electrochemical studies support the results obtained from the TA investigation and further prove the higher charge separation in the ternary composite system. These studies probe the excited states and provide evidence of longer charge separation in the binary and ternary composites, responsible for their remarkable photo-electrochemical performance.

Retrospective insights into recent MXene-based catalysts for CO2 electro/photoreduction: how far have we gone?

The electro/photocatalytic CO₂ reduction reaction (CO₂RR) is a long-term avenue toward synthesizing renewable fuels and value-added chemicals, as well as addressing the global energy crisis and environmental challenges. As a result, current research studies have focused on investigating new materials and implementing numerous fabrication approaches to increase the catalytic performances of electro/photocatalysts toward the CO₂RR. MXenes, also known as 2D transition metal carbides, nitrides, and carbonitrides, are intriguing materials with outstanding traits. Since their discovery in 2011, there has been a flurry of interest in MXenes in electrocatalysis and photocatalysis, owing to their several benefits, including high mechanical strength, tunable structure, surface functionality, high specific surface area, and remarkable electrical conductivity. Herein, this review serves as a milestone for the most recent development of MXene-based catalysts for the electrocatalytic and photocatalytic CO₂RR. The overall structure of MXenes is described, followed by a summary of several synthesis pathways classified as top-down and bottom-up approaches, including HF-etching, in situ HF-formation, electrochemical etching, and halogen etching. Additionally, the state-of-the-art development in the field of both the electrocatalytic and photocatalytic CO₂RR is systematically reviewed. Surface termination modulation and heterostructure engineering of MXene-based electro/photocatalysts, and insights into the reaction mechanism for the comprehension of the structure-performance relationship from the CO₂RR via density functional theory (DFT) have been underlined toward activity enhancement. Finally, imperative issues together with future perspectives associated with MXene-based electro/photocatalysts are proposed.

Probing plasmon-induced surface reactions using two-dimensional correlation vibrational spectroscopy

Surface plasmon resonance (SPR) has the ability to drive catalytic conversion of the reactant molecules via the production of hot electrons, which in general requires high activation energy. The reactions driven by these hot electrons are critical and essential in various heterogeneous surface catalytic reactions. However, there is a need to understand the dynamics of surface reactions and the underlying mechanism, which are influenced by several factors such as the constitution of the nanoparticle, exposure time, and reaction conditions to name a few. However, the effect of solvent in stabilizing the electron-hole pair, the orientation, and the surface coverage of the analyte are poorly understood due to the limitations of current methods. To get deeper insights into the reaction dynamics, we have demonstrated the combined utility of plasmon-enhanced Raman spectroscopy and Two-dimensional correlation spectroscopy (2DCOS) to study the plasmon-driven conversion of 4-nitrothiophenol on the surface of plasmonic nanoparticles. Interestingly, this combined technique provided us with previously unobservable results regarding surface catalysis by conventional spectroscopic analysis alone. Specifically, for the first time, 2DCOS provided critical insights in bridging the gap in our understanding of the interplay of solvent effect, orientation, and surface packing of the analyte molecules. It was observed that certain species like 4,4-dimercaptoazobenzene (DMAB) or 4-aminothiophenol (4-ATP) can be selectively formed based on the ordered or disordered phases of the analytes on the surface, thus paving the way to precisely control light-driven reactions through operando spectroscopy.

In situ self-exsolved ultrasmall Fe2P quantum dots from attapulgite nanofibers as superior cocatalysts for solar hydrogen evolution

Developing highly active, stable, and cost-efficient cocatalysts for photocatalytic H₂ evolution is pivotal in the area of renewable energy conversion. Herein, we present a straightforward, low-temperature phosphidation strategy for in situ exsolving doped Fe ions from natural attapulgite (ATP) nanofibers into a supported Fe₂P cocatalyst for the photocatalytic H₂ evolution reaction (HER). The resulting Fe₂P QDs/ATP features highly dispersed Fe₂P QDs with an average size of <2 nm and a strong interfacial interaction between self-exsolved Fe₂P QDs and the ATP substrate, thus providing ample and stable active sites for the photocatalytic HER. When employed as a cocatalyst, Fe₂P QDs/ATP exhibits superior catalytic activity and notable stability in a molecular system with low-cost xanthene dyes as the photosensitizer under visible light irradiation. More importantly, Fe₂P QDs/ATP can also efficiently and stably catalyze the photocatalytic HER when simply combined with various semiconductor photocatalysts (g-C₃N₄, TiO₂, and CdS). This strategy of exsolving transition metal ions from substrates is an effective yet simple approach for the development of highly active supported HER cocatalysts for renewable and clean energy conversion.

Visible Light-Driven Advanced Oxidation Processes to Remove Emerging Contaminants from Water and Wastewater: a Review

The scientific data review shows that advanced oxidation processes based on the hydroxyl or sulfate radicals are of great interest among the currently conventional water and wastewater treatment methods. Different advanced treatment processes such as photocatalysis, Fenton's reagent, ozonation, and persulfate-based processes were investigated to degrade contaminants of emerging concern (CECs) such as pesticides, personal care products, pharmaceuticals, disinfectants, dyes, and estrogenic substances. This article presents a general overview of visible light-driven advanced oxidation processes for the removal of chlorfenvinphos (organophosphorus insecticide), methylene blue (azo dye), and diclofenac (non-steroidal anti-inflammatory drug). The following visible light-driven treatment methods were reviewed: photocatalysis, sulfate radical oxidation, and photoelectrocatalysis. Visible light, among other sources of energy, is a renewable energy source and an excellent substitute for ultraviolet radiation used in advanced oxidation processes. It creates a high application potential for solar-assisted advanced oxidation processes in water and wastewater technology. Despite numerous publications of advanced oxidation processes (AOPs), more extensive research is needed to investigate the mechanisms of contaminant degradation in the presence of visible light. Therefore, this paper provides an important source of information on the degradation mechanism of emerging contaminants. An important aspect in the work is the analysis of process parameters affecting the degradation process. The initial concentration of CECs, pH, reaction time, and catalyst dosage are discussed and analyzed. Based on a comprehensive survey of previous studies, opportunities for applications of AOPs are presented, highlighting the need for further efforts to address dominant barriers to knowledge acquisition.

Synergistic Combination of Charge Carriers and Energy-Transfer Processes in Plasmonic Photocatalysis

Important efforts are currently under way in order to develop further the nascent field of plasmonic photocatalysis, striving for improved efficiencies and selectivities. A significant fraction of such efforts has been focused on distinguishing, understanding, and enhancing specific energy-transfer mechanisms from plasmonic nanostructures to their environment. Herein, we report a synthetic strategy that combines two of the main physical mechanisms driving plasmonic photocatalysis into an engineered system by rationally combining the photochemical features of energetic charge carriers and the electromagnetic field enhancement inherent to the plasmonic excitation. We do so by creating hybrid photocatalysts that integrate multiple plasmonic resonators in a single entity, controlling their joint contribution through spectral separation and differential surface functionalization. This strategy allows us to create complex hybrids with improved photosensitization capabilities, thanks to the synergistic combination of two photosensitization mechanisms. Our results show that the hot electron injection can be combined with an energy-transfer process mediated by the near-field interaction, leading to a significant increase in the final photocatalytic response of the material and moving the field of plasmonic photocatalysis closer to energy-efficient applications. Furthermore, our multimodal hybrids offer a test system to probe the properties of the two targeted mechanisms in energy-related applications such as the photocatalytic generation of hydrogen and open the door to wavelength-selective photocatalysis and novel tandem reactions.

A type II heterojunction α-Fe2O3/g-C3N4 for the heterogeneous photo-Fenton degradation of phenol

The heterogeneous photo-Fenton reaction is an effective method of chemical oxidation to remove phenol in wastewater with environmental friendliness and sustainability. Herein, the composite α-Fe₂O₃/g-C₃N₄, as a catalyst of the heterogeneous photo-Fenton reaction, has been synthesized by hydrothermal-calcination method using the abundant and low-cost FeCl₃·6H₂O and g-C₃N₄ as raw materials. The influence of the annealing temperature during calcination was also investigated. The UV-Vis diffuse reflectance spectra of samples show that the composite α-Fe₂O₃/g-C₃N₄ possesses the widest light response range. Furthermore, the transient photocurrent response curves demonstrated the strongest intensity of α-Fe₂O₃/g-C₃N₄. The annealed α-Fe₂O₃/g-C₃N₄ is indicative of the highest degradation efficiency in all samples due to the improvement of the charge transfer ability caused by the tight heterojunction structure. The results of the scavenger trapping experiments show that the hydroxyl radical was the main active species in degradation. Based on experimental results, a type II heterojunction should be built in the composite α-Fe₂O₃/g-C₃N₄, driving the photoelectrons transfer and migration by internal electronic field. This work provides a facile and new method to synthesize α-Fe₂O₃/g-C₃N₄ as an effective heterogeneous photo-Fenton catalyst for environmental remediation.

Composite α-Fe₂O₃/g-C₃N₄ with type II heterojunction to degrade phenol by heterogeneous photo-Fenton reaction.

Emerging Stacked Photocatalyst Design Enables Spatially Separated Ni(OH)2 Redox Cocatalysts for Overall CO2 Reduction and H2 O Oxidation

Construction of photocatalytic systems with spatially separated dual cocatalysts is considered as a promising route to modulate charge separation/transfer, promote surface redox reactivities, and prevent unwanted reverse reactions. However, past efforts on the loading of spatially separated double-cocatalysts are limited to hollow structured semiconductors with inner/outer surface and monocrystalline semiconductors with different exposed facets. To overcome this limitation, herein, enabled by a unique stacked photocatalyst design, a facile and versatile strategy for spatial separation of redox cocatalysts on various semiconductors without structural and morphological restriction is demonstrated. The smart design begins with the deposition of light-harvesting semiconductors on reduced graphene oxide (rGO) nanosheets, followed with the coverage of Ni(OH)₂ outer layer. The ternary photocatalysts exhibit superior activities and stabilities of H₂ O oxidation and selective CO₂ -to-CO reduction, remarkably surpassing other counterparts. The origin of the enhanced performance is attributed to the synergistic interplay of rGO@Ni(OH)₂ reduction cocatalysts surrounding the semiconductors and Ni(OH)₂ oxidation cocatalysts directly supported by the semiconductors, which mitigates the charge recombination, supplies highly active and selective sites for overall reactions, and preserves the semiconductors from photocorrosion. This work presents a new approach to regulating the position of dual cocatalysts and ameliorating the net efficiency of photoredox catalysis.

Two-dimensional graphitic carbon nitride/N-doped carbon with a direct Z-scheme heterojunction for photocatalytic generation of hydrogen

Photocatalysts with a direct Z-scheme heterojunction are promising by virtue of the effectively enhanced separation of charge carriers, high retention of redox ability and the absence of backward photocatalytic reactions. Their activity depends on band alignment and interfacial configurations between two semiconductors for charge carrier kinetics and the effective active sites for photochemical reactions. Herein, a two-dimensional (2D) graphitic carbon nitride/N-doped carbon (C₃N₄/NC) photocatalyst is synthesized by a gas template (NH₄Cl)-assisted thermal condensation method. C₃N₄/NC has the synthetic merits of a direct Z-scheme heterojunction, 2D-2D interfacial contact, and enhanced specific surface area to improve charge separation kinetics and provide abundant active sites for photochemical reaction. It exhibits an over 46-fold increase of the photocatalytic hydrogen production rate compared to bulk C₃N₄ under visible light illumination. This work demonstrates the great potential of 2D Z-scheme heterojunctions for photocatalysis and will inspire more related work in the future.

Significantly Enhanced Photocatalytic CO2 Reduction by Surface Amorphization of Cocatalysts

Rational phase engineering of reduction cocatalyst offers a promising route to modulate the photocatalytic activity and selectivity in the conversion of CO2 to chemical feedstocks. However, it remains a great challenge to choose a suitable phase given that high-crystallinity phase is more conducive to the charge transfer and separation, while amorphous phase is more favorable for the adsorption and activation of CO2 molecules. To resolve this dilemma, herein, with Pd as a well-defined model, a surface amorphization strategy has been developed to fabricate crystalline@amorphous semi-core-shell cocatalysts based on the transformation of outer layer atoms of crystalline cocatalysts to disorder phase. According to the theoretical and experimental analysis, in the heterostructured cocatalysts, crystalline core shuttles the photoexcited electrons from light-harvesting semiconductor to amorphous shell due to its strong electronic coupling with both components. Meanwhile, amorphous shell provides efficient active sites for preferential activation and conversion of CO2 and suppression of undesirable proton reduction. Benefiting from the synergistic effects between crystalline core and amorphous shell, the optimized heterophase cocatalyst with suitable thickness of amorphous shell achieves superior CO (22.2 µmol gcat-1 h-1 ) and CH4 (38.1 µmol gcat-1 h-1 ) formation rates with considerable selectivity and high stability in comparison with crystalline and amorphous counterparts.

Enhanced photocatalytic CO2-reduction activity to form CO and CH4 on S-scheme heterostructured ZnFe2O4/Bi2MoO6 photocatalyst

A novel ZnFe₂O₄/Bi₂MoO₆ heterojunction photocatalyst was synthesized by a facile solvothermal route. The incorporation of a narrow bandgap ZnFe₂O₄ photocatalyst can efficiently improve the range of light response and light absorption capacity of the Bi₂MoO₆ via the formation of a hybrid structure at the interface. The formed hybrid interface facilitates the separation efficiency of photo-generated carriers at ZnFe₂O₄/Bi₂MoO₆ heterojunction significantly. The experimental results confirm that ZnFe₂O₄/Bi₂MoO₆-20% heterojunction showed the highest photocatalytic efficiency for CO₂ reduction. Specifically, the total product yield of 47.1 μmol g^-1 under 5 h simulated sunlight irradiation is measured in the counterparts of pure ZnFe₂O₄ (14.79 μmol g^-1) and pure Bi₂MoO₆ (19.01 μmol g^-1). Indeed, the formation of ZnFe₂O₄/Bi₂MoO₆ heterojunction improved the photocatalytic efficiency for CO₂ reduction.

The synergistic effect of enhanced photocatalytic activity and photothermal effect of oxygen-deficient Ni/reduced graphene oxide nanocomposite for rapid disinfection under near-infrared irradiation

The rational design of high antibacterial efficiency are urgently needed as the occurrence of drug-resistance issues. Hence, Ni/reduced graphene oxide nanocomposite (Ni/rGO) with different amounts of oxygen vacancies were fabricated for efficient disinfection. The optimized Ni/rGO (A100) exhibited highly effective inactivation efficacy of 99.6% and 99.5% against Escherichia coli and Bacillus subtilis within 8 min near-infrared (NIR) irradiation through the synergistic effects of photothermal therapy and oxidative damage, which were much higher than single treatment. The A100 nanocomposite achieved an extraordinary photothermal conversion efficiency (35.78%) under the 808 nm irradiation for enhanced photothermal hyperthermia, thereby destroying the cell membrane and accelerating the GSH depletion. The radical scavenger experiment confirmed that •O₂^- and •OH play the chief role in photodisinfection reaction. Besides, A100 could exert significant damage on the ATP synthesis. The excellent photothermal performance and photocatalytic activity can be attributed to the appropriate oxygen vacancy density, which improves the absorption of NIR light and facilitates the separation of photogenerated electron-hole pairs. Besides, the higher NiO content of A100 contributed to improving the photocatalytic effect. Our work demonstrated a promising strategy for efficient water pollution purification caused by pathogenic bacteria.

Engineering an Interfacial Facet of S-Scheme Heterojunction for Improved Photocatalytic Hydrogen Evolution by Modulating the Internal Electric Field

Constructing a step-scheme (S-scheme) heterojunction represents a promising route to overcome the drawbacks of single-component and traditional heterostructured photocatalysts by simultaneously broadening the optical response range and optimizing the redox ability of the photocatalytic system, the efficiency of which greatly lies in the separation behaviors of photogenerated charge carriers with strong redox capabilities. Herein, we demonstrate interfacial facet engineering as an effective strategy to manipulate the charge transfer and separation for substantially improving the photocatalytic activities of S-scheme heterojunctions. The facet engineering is performed with the growth of ZnIn₂S₄ on (010) and (001) facet-dominated BiOBr nanosheets to fabricate ZIS/BOB-(010) and ZIS/BOB-(001) S-scheme heterojunctions, respectively. It is disclosed that a larger Fermi level difference between BiOBr-(001) and ZnIn₂S₄ enables the formation of a stronger built-in electric field with more serious band bending in the space charge region around the interface. As a result, the directional migration and recombination of pointless photoexcited electrons in the conduction band (CB) of BiOBr and holes in the valence band (VB) of ZnIn₂S₄ with weak redox ability are speeded up enormously, thereby contributing to more efficient spatial separation of powerful CB electrons of ZnIn₂S₄ and VB holes of BiOBr for participating in overall redox reactions. Profiting from these merits, the ZIS/BOB-(001) displays a significant superiority in photocatalytic H₂ evolution over ZIS/BOB-(010) and mono-component counterparts. This work provides new deep insights into the rational construction of a S-scheme photocatalyst based on an interfacial facet design from the viewpoint of internal electric field regulation.

Platinum quantum dots enhance electrocatalytic activity of bamboo-like nitrogen doped carbon nanotubes embedding Co-MnO nanoparticles for methanol/ethanol oxidation

Interaction of multi-active components can effectively maximize the overall catalytic ability of alcohol fuel cells. Herein, the self-assembled nitrogen doped carbon nanotubes (NCNTs) containing Co-MnO composite (Co-MnO/NCNTs) are successfully synthesized using dihydrodiamine as carbon and nitrogen source through one-step synthesis. In order to further improve the catalytic activity of Co-MnO/NCNTs for alcohol oxidation, small amounts of platinum quantum dots are uniformly loaded on Co-MnO/NCNTs formation of quaternary hybrid (named Pt/Co-MnO/NCNTs) during microwave reduction stage. Notably, the prepared Pt/Co-MnO/NCNTs hybrids possess the excellent methanol and ethanol oxidation mass current density of 1775.4 and 1112.8 mA mg^-1 in alkaline condition, which are 3.6 and 2.25 times higher than that of Pt/C catalysts, respectively. The current density of ethanol catalytic oxidation is lower than that of methanol, which may be due to the partial oxidation of acetyl (the intermediate product of ethanol) on the Pt (1 1 1) crystal surface. More importantly, CO oxidation experiments reveal that strong electronic synergistic effect between MnO and Pt quantum dot can greatly improve the CO anti-poisoning ability. Another significant advantage of Pt/Co-MnO/NCNTs is that low platinum loading leads to low cost effective, which demonstrates that the modification non-noble metal catalysts with a few noble metals quantum dots is a promising choice to mass produce high performance catalyst with remarkably boosting electrocatalytic activity for alcohol oxidation.

Cocatalyst Engineering in Piezocatalysis: A Promising Strategy for Boosting Hydrogen Evolution

Piezoelectric semiconductor-based piezocatalysis has emerged as a promising approach for converting mechanical energy into chemical energy for renewable hydrogen generation and wastewater treatment under the action of mechanical vibration. Similar to photocatalysis, piezocatalysis is triggered by the separation, transfer, and consumption of piezo-generated electrons and holes. Inspired by this, herein, we report that the cocatalyst, which is widely used in photocatalysis, can also improve the semiconductor-based piezocatalytic properties. In the proof-of-concept design, well-defined Pd as a model cocatalyst has been deposited on the surface of piezoelectric BiFeO₃ nanosheets, which not only facilitates the separation of charge carriers by accepting the piezoelectrons from BiFeO₃ but also lowers the activation energy/overpotential through supplying highly active sites for the proton reduction reaction. Consequently, the as-obtained hybrid piezocatalyst delivers a high H₂ evolution rate of 11.4 μmol h^-1 (10 mg of catalyst), 19.0 times as high as that of bare BiFeO₃. The band tilting induced by the piezoelectric potential is proposed to lower or eliminate the Schottky barrier and smooth the electron transfer from BiFeO₃ to Pd, while the exposed facet, domain size, and loading amount of Pd cocatalyst are proved to be the key parameters determining the ultimate piezocatalytic activity. Our work provides some enlightenment on advancing the design and fabrication of more efficient piezocatalysts for H₂ evolution based on rational engineering on the cocatalyst.

The construction of a dual direct Z-scheme NiAl LDH/g-C3N4/Ag3PO4 nanocomposite for enhanced photocatalytic oxygen and hydrogen evolution

Dual direct Z-scheme photocatalysts for overall water decomposition have demonstrated strong redox abilities and the efficient separation of photogenerated electron-hole pairs. Overall water splitting utilizing NiAl-LDH-based binary and ternary nanocomposites has been extensively investigated. The synthesized binary and ternary nanocomposites were characterized via XRD, FTIR, SEM, HRTEM, XPS, UV-DRS, and photoelectrochemical measurements. The surface wettability properties of the prepared nanocomposites were measured via contact angle measurements. The application of the NiAl-LDH/g-C3N4/Ag3PO4 ternary nanocomposite was investigated for photocatalytic overall water splitting under light irradiation. In this work, we found that in the presence of Ag3PO4, the evolution of H2 and O2 is high over LCN30, and 2.8- fold (O2) and 1.4-fold (H2) activity increases can be obtained compared with the use of LCN30 alone. It is proposed that Ag3PO4 is involved in the O2 evolution reaction during water oxidation and g-C3N4 is involved in overall water splitting. Our work not only reports overall water splitting using NiAl-LDH-based nanocomposites but it also provides experimental evidence for understanding the possible reaction process and the mechanism of photocatalytic water splitting. Photoelectrochemical measurements confirmed the better H2 and O2 evolution abilities of NiAl-LDH/g-C3N4/Ag3PO4 in comparison with NiAl LDH, g-C3N4, Ag3PO4, and LCN30. The observed improvement in the gas evolution properties of NiAl LDH in the presence of Ag3PO4 is due to the formation of a dual direct Z-scheme, which allows for the easier and faster separation of charge carriers. More importantly, the LCNAP5 heterostructure shows high levels of H2 and O2 evolution, which are significantly enhanced compared with LCN30 and pure NiAl LDH.

Innovative multifunctional hybrid photoelectrode design based on a ternary heterojunction with super-enhanced efficiency for artificial photosynthesis

Electrochemical cells for direct conversion of solar energy to electricity (or hydrogen) are one of the most sustainable solutions to meet the increasing worldwide energy demands. In this report, a novel and highly-efficient ternary heterojunction-structured Bi₄O₇/Bi_3.33(VO₄)₂O₂/Bi₄₆V₈O₈₉ photoelectrode is presented. It is demonstrated that the combination of an inversion layer, induced by holes (or electrons) at the interface of the semiconducting Bi_3.33(VO₄)₂O₂ and Bi₄₆V₈O₈₉ components, and the rectifying contact between the Bi₄O₇ and Bi_3.33(VO₄)₂O₂ phases acting afterward as a conventional p-n junction, creates an adjustable virtual p-n-p or n-p-n junction due to self-polarization in the ion-conducting Bi₄₆V₈O₈₉ constituent. This design approach led to anodic and cathodic photocurrent densities of + 38.41 mA cm^-2 (+ 0.76 V_RHE) and- 2.48 mA cm^-2 (0 V_RHE), respectively. Accordingly, first, this heterojunction can be used either as photoanode or as photocathode with great performance for artificial photosynthesis, noting, second, that the anodic response reveals exceptionally high: more than 300% superior to excellent values previously reported in the literature.

The synthesis of interface-modulated ultrathin Ni(ii) MOF/g-C3N4 heterojunctions as efficient photocatalysts for CO2 reduction

It is highly desirable to improve charge separation and to provide catalytic functions for the efficient photocatalytic CO2 reduction reaction (CO2RR) on g-C3N4 (CN). Here, dimension-matched ultrathin NiMOF/CN heterojunctions have been successfully constructed by the in situ growth of NiMOF nanosheets on hydroxylated and 1,4-aminobenzoic acid (AA) functionalized CN nanosheets, respectively, with ultrasonic assistance. The resultant NiMOF/CN heterojunctions exhibited excellent photocatalytic activities for the CO2RR to produce CO and CH4, especially NiMOF/CN-AA, which had photoactivity 18 times higher than that of bare CN. Based on the surface photovoltage responses, wavelength-dependent photocurrent action spectra, electrochemical impedance spectra, and CO2 electrochemical reduction data, it is clearly confirmed that the exceptional photoactivity mainly resulted from the favorable charge transport properties of ultrathin CN and coupled NiMOF, and from the greatly enhanced charge separation via excited high-level electron transfer from CN to NiMOF in the resultant intimately contacted heterojunction caused by the induction effect of AA, and also from the provided catalytic functionality of the central Ni(ii) for CO2 activation. This work provides a feasible synthetic protocol to fabricate MOF-containing dimension-matched heterojunctions with good charge separation for efficient photocatalysis.