A nopinone based multi-functional probe for colorimetric detection of Cu2+ and ratiometric detection of Ag. Photochem Photobiol Sci 2020;19:49-55. [PMID: 31793618 DOI: 10.1039/c9pp00297a]

A multifunctional fluorescent sensor for Ag+ and Hg2+ detection in seawater

In order to detect Ag+ and Hg2+ in seawater, we explored a multifunctional fluorescence sensor. A multifunctional Ag+ and Hg2+ sensor was designed by using gold nanoparticles (AuNPs) as quenching agent, PicoGreen dye as fluorescent probe of base pairing double-stranded deoxyribonucleic acid (DNA), and combining the characteristics of Ag+ making C base mismatch and Hg2+ making T base mismatch. Meanwhile, the DNA logic gate was constructed by establishing logic circuit, truth table, and logic formula. The relevant performances of the sensor were investigated. The results revealed that the sensor can detect Ag+ in the range of 100 to 700 nM with R2 = 0.98129, and its detection limit is 16.88 nM (3σ/slope). The detection range of Hg2+is 100-900 nM with R2 = 0.99725, and the detection limit is 5.59 nM (3σ/slope). An AND-AND-NOR-AND molecular logic gate has been successfully designed. With the characteristics of high sensitivity, multifunction, and low cost, the recommended detection method has the potential to be applied to the detection of Ag+ and Hg2+ in seawater.

Development in Fluorescent OFF-ON Probes Based on Cu2+ Promoted Hydrolysis Reaction of the Picolinate Moiety

Anions and cations have a key role in our normal life. Cu²⁺ ion is a crucial trace element accountable for the part of several cellular enzymes and proteins, including cytochrome c oxidase, dopamine monooxygenase, Cu/Zn superoxide dismutase, and ceruloplasmin. WHO has found the extreme acceptable level of Cu²⁺ ions in drinking water is up to 2.0 ppm. Excess use of Cu²⁺ ions is associated with various human genetic disorders. Thus, the visualization of Cu²⁺ ions to avoid its toxic effects in chemical and biological systems is significant. In this review we have summarized sensors based on catalytic hydrolysis of picolinate to detect Cu²⁺ ions. The sensors based on hydrolysis of picolinate are very selective as compared to the other sensors for Cu²⁺ ions detection. We have focused on describing the structure, spectral properties, detection limits, and bioimaging model of the sensors.

A Novel Dual-Emission Fluorescence Probe Based on CDs and Eu3+ Functionalized UiO-66-(COOH)2 Hybrid for Visual Monitoring of Cu2

In this work, CDs@Eu-UiO-66(COOH)₂ (denoted as CDs-F2), a fluorescent material made up of carbon dots (CDs) and a Eu³⁺ functionalized metal-organic framework, has been designed and prepared via a post-synthetic modification method. The synthesized CDs-F2 presents dual emissions at 410 nm and 615 nm, which can effectively avoid environmental interference. CDs-F2 exhibits outstanding selectivity, great sensitivity, and good anti-interference for ratiometric sensing Cu²⁺ in water. The linear range is 0-200 µM and the limit of detection is 0.409 µM. Interestingly, the CDs-F2's silicon plate achieves rapid and selective detection of Cu²⁺. The change in fluorescence color can be observed by the naked eye. These results reveal that the CDs-F2 hybrid can be employed as a simple, rapid, and sensitive fluorescent probe to detect Cu²⁺. Moreover, the possible sensing mechanism of this dual-emission fluorescent probe is discussed in detail.

Multicolor colorimetric assay for copper ion detection based on the etching of gold nanorods

An effective, selective, and multicolor colorimetric assay for Cu²⁺ detection based on the regulation of peroxidase-like nanozyme-mediated etching of gold nanorods (Au NRs) is proposed. Cu²⁺-creatinine complex is selected as the nanozyme that exhibits excellent peroxidase-like activity even in the case of low concentration of Cu²⁺, which can catalyze 3,3,5,5-tetramethylbenzidine (TMB) to produce oxidized TMB (TMB⁺) in the presence of hydrogen peroxide, and TMB⁺ is oxidized to generate TMB²⁺ after adding H⁺, and the TMB²⁺ can etch Au NRs. The determination of Cu²⁺ is achieved based on the blue shift of the longitudinal localized surface plasmon resonance peak of Au NRs. Under the optimal conditions, the developed colorimetric assay exhibits high sensitivity for the detection of Cu²⁺ (limit of detection is 0.034 μM) with a wide linear range of 0.05-4.0 μM (R² = 0.987). The solution shows a rainbow-like color in response to the increase of Cu²⁺ concentration, which can realize the semi-quantitative detection of Cu²⁺ by naked eyes. In addition, the developed method exhibits excellent selectivity for Cu²⁺-detection. The established method was used for the determination of Cu²⁺ in lake water, soil, and normal human serum with satisfactory recovery of spiked samples.

Irreversible coumarin based fluorescent probe for selective detection of Cu2+ in living cells

Copper ion (Cu²⁺) is an essential part of the living organisms. Cu²⁺ ions play a vital role in many biotic processes. An abnormal amount of Cu²⁺ ions may result in serious diseases. Herein, a novel "fluorescent ON" probe NC-Cu to trace minute levels of Cu²⁺ ions in presence of various biological active species has been developed. Lysosomal cells targeting group (Morpholine) was added to the probe. The spectral properties of probe NC-Cu were recorded in HEPES buffer (0.01 M, pH = 7.4, comprising 50% CH₃CN, λ_ex = 430 nm, slit: 5 nm). The synthesized probe NC-Cu work based on copper promoted catalytic hydrolysis of hydrazone and shows remarkable fluorescence enhancement. The reaction of the probe with Cu²⁺ ions was completed within 20 min. An excellent linear relationship (R² = 0.9952) was found and the limit of detection (LOD, according to the 3σ/slope) for Cu²⁺ ions was calculated to be 5.8 µM. Furthermore, NC-Cu was effectively functional in the living cells (KYSE30 cells) to trace Cu²⁺ ions.

A novel AIE fluorescent probe based on myrtenal for Cu2+ detection in a near-perfect aqueous medium and bioimaging in vegetables and zebrafish

An AIE-active fluorescent probe MHTS with good sensitivity and selectivity for the detection of Cu2+ was synthesized from myrtenal.

Selective determination of Ag+ in the presence of Cd2+, Hg2+ and Cu2+ based on their different interactions with gold nanoclusters

In this work, a fluorescence method was developed for selective detection of Ag⁺ in the presence of Cd²⁺, Hg²⁺, and Cu²⁺ based on gold nanoclusters (AuNCs). That is, bovine serum albumin (BSA) templated AuNCs with double emission peaks were synthesized using BSA as a protective agent. AuNCs with uniform distribution and average size between 2.0 and 2.2 nm were synthesized using a green and simple method, and showed bright orange-red fluorescence under ultraviolet light. AuNCs have two emission peaks at 450 nm and 630 nm with an excitation wavelength of 365 nm. Under alkaline conditions, Cd²⁺ can combine with the surface sulfhydryl groups of BSA–AuNCs to form Cd–S bonds, which cause AuNCs to aggregate, resulting in an increase in fluorescence intensity at 630 nm. Conversely, due to the d¹⁰–d¹⁰ metal affinity interaction, the addition of Hg²⁺ can reduce the fluorescence peak at 630 nm. Ag⁺ was reduced to Ag⁰ by gold nuclei in AuNCs, forming a stable hybrid Au@ AgNCs species with blue-shifted and enhanced fluorescence. Finally, the paramagnetic behavior of Cu²⁺ combined with BSA causes the excited electrons of the gold cluster to lose their energy via ISC, eventually leading to simultaneous quenching of the two emission peaks. The results show that the limit of detection (LOD) of Ag⁺, Hg²⁺, Cd²⁺ and Cu²⁺ is 1.19 μM, 3.39 μM, 1.83 μM and 5.95 μM, respectively.

A fluorescence method was developed for selective detection of Ag⁺ in the presence of Cd²⁺, Hg²⁺, and Cu²⁺ based on gold nanoclusters. The limit of detection for Ag⁺, Hg²⁺, Cd²⁺ and Cu²⁺ is 1.19 μM, 3.39 μM, 1.83 μM and 5.95 μM, respectively.