A Review on the Synthesis of Polypeptoids

Polyeptoids are a promising class of polypeptide mimetic biopolymers based on N-substituted glycine backbones. Because of the high designability of their side chains, polypeptoids have a wide range of applications in surface antifouling, biosensing, drug delivery, and stimuli-responsive materials. To better control the structures and properties of polypeptoids, it is necessary to understand different methods for polypeptoid synthesis. This review paper summarized and discussed the main synthesis methods of polypeptoids: the solid-phase submonomer synthesis method, ring-opening polymerization method and Ugi reaction method.

A self-crosslinking nanogel scaffold for enhanced catalytic efficiency and stability

We report a facile and efficient approach to prepare multifunctional bioinspired platforms under mild conditions that offer increased catalytic efficiency and stability.

Research Progress in Polypeptoids Prepared by Controlled Ring-Opening Polymerizations

Polypeptoids, structural mimics of polypeptides, have attracted considerable attention due to their biocompatibility, proteolytic stability, thermal processability, good solubility, synthetic accessibility, and structural diversity. Polypeptoids have emerged as an interesting material in both polymer science and biological field. This review primarily discusses the research progress of polypeptoids prepared by controlled ring-opening polymerizations in the past decade, including synthetic strategies of monomers, polymerizations by different initiators, postfunctionalization, fundamental properties, crystallization-driven self-assembly, and potential biological applications.

Modulating Insulin Aggregation with Charge Variable Cholic Acid-Derived Polymers

To understand the effect of cholic acid (CA)-based charge variable polymeric architectures on modulating the insulin aggregation process, herein, we have designed side-chain cholate-containing charge variable polymers. Three different types of copolymers from 2-(methacryloyloxy)ethyl cholate with anionic or cationic or neutral units have been synthesized by reversible addition-fragmentation chain transfer polymerization. The effects of these copolymers on the insulin fibrillation process was studied by multiple biophysical approaches including different types of spectroscopic and microscopic analyses. Interestingly, the CA-based cationic polymer (CP-10) was observed to inhibit the insulin fibrillation process in a dose-dependent manner and to act as an effective anti-amyloidogenic agent. Corresponding anionic (AP-10) and neutral (NP-10) copolymers with cholate pendants remained insignificant in controlling the aggregation process. Tyrosine fluorescence assays and Nile red fluorescence measurements demonstrate the role of hydrophobic interaction to explain the inhibitory potencies of CP-10. Furthermore, circular dichroism spectroscopic measurements were carried out to explore the secondary structural changes of insulin fibrils in the presence of cationic polymers with and without cholate moieties. Isothermal titration calorimetry measurements revealed the involvement of electrostatic polar interaction between the CA-based cationic polymer and insulin at different stages of fibrillation. Overall, this work demonstrates the efficacy of the CA-based cationic polymer in controlling the insulin aggregation process and provides a novel dimension to the studies on protein aggregation.

Stimuli-Responsive Poly(aspartamide) Derivatives and Their Applications as Drug Carriers

Poly(aspartamide) derivatives, one kind of amino acid-based polymers with excellent biocompatibility and biodegradability, meet the key requirements for application in various areas of biomedicine. Poly(aspartamide) derivatives with stimuli-responsiveness can usually respond to external stimuli to change their chemical or physical properties. Using external stimuli such as temperature and pH as switches, these smart poly(aspartamide) derivatives can be used for convenient drug loading and controlled release. Here, we review the synthesis strategies for preparing these stimuli-responsive poly(aspartamide) derivatives and the latest developments in their applications as drug carriers.

Stimulus-Responsive Polymers Based on Polypeptoid Skeletons

Polypeptoids have attracted a lot of atteSDntion because of their unique structural characteristics and special properties. Polypeptoids have the same main chain structures to polypeptides, making them have low cytotoxicity and excellent biocompatibility. Polypeptoids can also respond to external environmental changes by modifying the configurations of the side chains. The external stimuli can be heat, pH, ions, ultraviolet/visible light and active oxygen or their combinations. This review paper discussed the recent research progress in the field of stimulus-responsive polypeptoids, including the design of new stimulus-responsive polypeptoid structures, controlled actuation factors in response to external stimuli and the application of responsive polypeptoid biomaterials in various biomedical and biological nanotechnology, such as drug delivery, tissue engineering and biosensing.

A convenient approach for antibacterial polypeptoids featuring sulfonium and oligo(ethylene glycol) subunits

Bioinspired polypeptoids show great potential in many applications. Here, we report a convenient approach to synthesize a novel type of polypeptoid containing both sulfonium and oligo(ethylene glycol) (OEG) moieties by ring-opening polymerization (ROP) and a post-modification strategy. Three types of epoxides with (OEG)n (n = 1-3) groups are involved to offer various functionalities. The obtained polypeptoid sulfonium salts show positive ζ potential, irrespective of the solution pH and the degree of polymerization (DP). We demonstrate that the polypeptoids exhibit excellent antibacterial activity against Staphylococcus aureus (S. aureus) with MIC (minimal inhibitory concentration) in the range of 3.9-7.8 μg mL-1. In addition, the polypeptoids have a low hemolysis property and good in vitro biocompatibility. Remarkably, the as-prepared polypeptoids show rapid and potent antibacterial activity within 5 min. These features suggest that the obtained polypeptoids offer great potential for antimicrobial agents.

Synthesis and self-assembly of photo-responsive polypeptoid-based copolymers containing azobenzene side chains

Photo-responsive polypeptoid-based copolymers containing azobenzene side chains have been well synthesized and they could self-assemble into tunable nanostructures with reversible light-switched behaviors.

Meticulous Doxorubicin Release from pH-Responsive Nanoparticles Entrapped within an Injectable Thermoresponsive Depot

The dual stimuli-controlled release of doxorubicin from gel-embedded nanoparticles is reported. Non-cytotoxic polymer nanoparticles are formed from poly(ethylene glycol)-b-poly(benzyl glutamate) that, uniquely, contain a central ester link. This connection renders the nanoparticles pH-responsive, enabling extensive doxorubicin release in acidic solutions (pH 6.5), but not in solutions of physiological pH (pH 7.4). Doxorubicin-loaded nanoparticles were found to be stable for at least 31 days and lethal against the three breast cancer cell lines tested. Furthermore, doxorubicin-loaded nanoparticles could be incorporated within a thermoresponsive poly(2-hydroxypropyl methacrylate) gel depot, which forms immediately upon injection of poly(2-hydroxypropyl methacrylate) in dimethyl sulfoxide solution into aqueous solution. The combination of the poly(2-hydroxypropyl methacrylate) gel and poly(ethylene glycol)-b-poly(benzyl glutamate) nanoparticles yields an injectable doxorubicin delivery system that facilities near-complete drug release when maintained at elevated temperatures (37 °C) in acidic solution (pH 6.5). In contrast, negligible payload release occurs when the material is stored at room temperature in non-acidic solution (pH 7.4). The system has great potential as a vehicle for the prolonged, site-specific release of chemotherapeutics.

Covalent Post-Assembly Modification: A Synthetic Multipurpose Tool in Supramolecular Chemistry

The use of covalent post-assembly modification (PAM) in supramolecular chemistry has grown significantly in recent years, to the point where PAM is now a versatile synthesis tool for tuning, modulating, and expanding the functionality of self-assembled complexes and materials. PAM underpins supramolecular template-synthesis strategies, enables modular derivatization of supramolecular assemblies, permits the covalent 'locking' of unstable structures, and can trigger controlled structural transformations between different assembled morphologies. This Review discusses key examples of PAM spanning a range of material classes, including discrete supramolecular complexes, self-assembled soft nanostructures and hierarchically ordered polymeric and framework materials. As such, we hope to highlight how PAM has continued to evolve as a creative and functional addition to the synthetic chemist's toolbox for constructing bespoke self-assembled complexes and materials.

Morphological Transitions of Photoresponsive Vesicles from Amphiphilic Polypeptoid Copolymers for Controlled Release

Photoresponsive polymers have attracted increasing interest for a variety of applications. Here, we report a family of photoresponsive polypeptoid-based copolymer poly(ethylene glycol)-b-poly(N-(S-(o-nitrobenzyl)-thioethyl) glycine)-co-poly(N-(2-phenylethyl) glycine) (PEG-b-PNSN-co-PNPE) synthesized by the controlled ring-opening polymerization (ROP) technique. The key feature of the design is to incorporate both o-nitrobenzyl group moiety to offer the photoresponsive property and phenethyl residues to tune the structural and amphiphilic property of the system. We demonstrate that the cleavage degree of the o-nitrobenzyl group can reach to 100% upon UV-irradiation. With delicate design, a photoresponsive vesicle-to-sphere transition has been observed that facilitates the release of the encapsulants. This work provides a facile approach to prepare a type of photoresponsive polymers with tunable properties for drug delivery.

Polymerization of dopamine accompanying its coupling to induce self-assembly of block copolymer and application in drug delivery

The polymerization of dopamine and its coupling occur in succession, which synergistically induces the self-assembly of block copolymer to yield ordered structures, including micelles and vesicles.