Synthesis of Chain-End Functional Polydienes Using Diene Comonomer Bearing Boronic Acid Masked with Diaminonaphthalene

Diene comonomers bearing boronic acid masked with 1,8-diaminonaphthalene (dan) were applied to copolymerization with isoprene or butadiene using neodymium borohydride complex as a catalyst. The comonomers were tolerant to excess modified methylaluminoxane (MMAO) and thus were applicable to the polymerization system using MMAO. On the other hand, the corresponding pinacol borate was highly reactive toward MMAO, and no incorporation into the obtained polymer was observed. A ¹³C NMR microstructural analysis of the hydrogenated copolymer revealed that all of the comonomers were located at the chain end. Further functionalization using the boron moiety at the polymer chain end was also investigated.

MODIFICATION OF POLYBUTADIENE RUBBER: A REVIEW

Developments in modification of polybutadiene rubber (PBR) using various reagents and catalysts have been reviewed. Hydrogenation and functionalization occurring at the site of unsaturation along chain length are discussed. Hydrogenation involving various metal catalyzed processes is discussed. Suitable conditions that are effective during hydrogenation and functionalization are mentioned in this article. Reactivity ratios associated with microstructures of polybutadiene rubber and possible mechanisms involved are described in the review. The importance of reaction conditions during reactivity and their impact on product properties are highlighted. A specific method that needs to be adopted in order to achieve expected product properties is discussed. Various industrial applications of modified PBR and their commercial products in the global market are discussed.

Enhanced compatibility, morphology, rheological and mechanical properties of carboxylated acrylonitrile butadiene rubber/chloroprene rubber/graphene nanocomposites: effect of compatibilizer and graphene content

Elastomeric nanocomposites were prepared from carboxylated acrylonitrile butadiene rubber/chloroprene rubber (XNBR/CR), graphene and a glycidyl methacrylate (GMA)-grafted XNBR (XNBR-g-GMA) compatibilizer by using a two-roll mill. The effect of graphene and XNBR-g-GMA compatibilizer on curing characteristics, rheological and mechanical properties and morphology of the nanocomposites was investigated. The curing properties and the morphology of the nanocomposites were studied by rheometry, SEM and TEM, respectively. The results of rheometry showed that by adding the XNBR-g-GMA compatibilizer and increasing the graphene content, the scorch time and optimum curing time decreased, but the torque increased, while the curing time increased with increasing CR percentage in the blend. Also, the results of DMTA tests showed that by adding the XNBR-g-GMA compatibilizer, there was compatibility between CR and XNBR and the dispersion of graphene in the XNBR/CR matrix was improved. This phenomenon was confirmed by direct observation of exfoliated graphene nanosheets by TEM. Also, the addition of XNBR-g-GMA and the increase of graphene content in the XNBR/CR matrix caused the fracture surface of the samples to be roughened and the size of dispersed phase (CR) in the XNBR matrix becomes smaller. The results of mechanical properties showed that the addition of the XNBR-g-GMA and increasing the graphene content resulted in increased hardness, fatigue strength, tensile strength, modulus and elongation-at-break.

Synthesis and properties investigation of hydroxyl functionalized polyisoprene prepared by cobalt catalyzed co-polymerization of isoprene and hydroxylmyrcene

Controlled copolymerization of isoprene and hydroxylmyrcene afforded well-defined hydroxyl functionalized polyisoprene. Blends of functionalized polyisoprene/SiO₂ displayed enhanced miscibility, and remarkable vulcanization and mechanical properties.