Surface Reconstruction of Silicone-Based Amphiphilic Polymers for Mitigating Marine Biofouling

Poly(dimethylsiloxane) (PDMS) coatings are considered to be environmentally friendly antifouling coatings. However, the presence of hydrophobic surfaces can enhance the adhesion rate of proteins, bacteria and microalgae, posing a challenge for biofouling removal. In this study, hydrophilic polymer chains were synthesised from methyl methacrylate (MMA), Poly(ethylene glycol) methyl ether methacrylate (PEG-MA) and 3-(trimethoxysilyl) propyl methacrylate (TPMA). The crosslinking reaction between TPMA and PDMS results in the formation of a silicone-based amphiphilic co-network with surface reconstruction properties. The hydrophilic and hydrophobic domains are covalently bonded by condensation reactions, while the hydrophilic polymers migrate under water to induce surface reconstruction and form hydrogen bonds with water molecules to form a dense hydrated layer. This design effectively mitigates the adhesion of proteins, bacteria, algae and other marine organisms to the coating. The antifouling performance of the coatings was evaluated by assessing their adhesion rates to proteins (BSA-FITC), bacteria (B. subtilis and P. ruthenica) and algae (P. tricornutum). The results show that the amphiphilic co-network coating (e.g., P-AM-15) exhibits excellent antifouling properties against protein, bacterial and microalgal fouling. Furthermore, an overall assessment of its antifouling performance and stability was conducted in the East China Sea from 16 May to 12 September 2023, which showed that this silicon-based amphiphilic co-network coating remained intact with almost no marine organisms adhering to it. This study provides a novel approach for the development of high-performance silicone-based antifouling coatings.

Lamellar Microphase Separation and Phase Transition of Hydrogen-Bonding/Crystalline Statistical Copolymers: Amide Functionalization at the Interface

Microphase separation of random copolymers, as well as that of high χ-low N block copolymers, is promising to construct sub-10-nm structures into materials. Herein, we designed statistical copolymers consisting of 2-hydroxyethyl acrylate (HEA) and N-octadecylacrylamide (ODAAm) to produce crystallization and hydrogen bond-assisted lamellar structure materials. The copolymers not only formed a crystalline lamellar structure with 3-4 nm domain spacing but also maintained an amorphous lamellar structure via phase transition above the melting temperature up to approximately 100 °C. The key is to introduce hydrogen-bonding amide junctions between the octadecyl groups and the polymer backbones, by which the polymer chains are physically fixed at the interface of lamellar structures even above the melting temperature. The stabilization of the lamellar structure by the amide units is also supported by the fact that the lamellar structure of all-acrylate random copolymers bearing hydroxyethyl and crystalline octadecyl groups is disordered above the melting temperature. By spin-coating on a silicon substrate, the HEA/ODAAm copolymer formed a multilayered lamellar thin film consisting of a hydrophilic hydroxyethyl/main chain phase and a hydrophobic octadecyl phase. The structure and order-disorder transition were analyzed by neutron reflectivity.

Amide-Containing Bottlebrushes via Continuous-Flow Photoiniferter Reversible Addition-Fragmentation Chain Transfer Polymerization: Micellization Behavior

Herein, a series of ternary amphiphilic amide-containing bottlebrushes were synthesized by photoiniferter (PI-RAFT) polymerization of macromonomers in continuous-flow mode using trithiocarbonate as a chain transfer agent. Visible light-mediated polymerization of macromonomers under mild conditions enabled the preparation of thermoresponsive copolymers with low dispersity and high yields in a very short time, which is not typical for the classical reversible addition-fragmentation chain transfer process. Methoxy oligo(ethylene glycol) methacrylate and alkoxy(C12-C14) oligo(ethylene glycol) methacrylate were used as the basic monomers providing amphiphilic and thermoresponsive properties. The study investigated how modifying comonomers, acrylamide (AAm), methacrylamide (MAAm), and N-methylacrylamide (-MeAAm) affect the features of bottlebrush micelle formation, their critical micelle concentration, and loading capacity for pyrene, a hydrophobic drug model. The results showed that the process is scalable and can produce tens of grams of pure copolymer per day. The unmodified copolymer formed unimolecular micelles at temperatures below the LCST in aqueous solutions, as revealed by DLS and SLS data. The incorporation of AAm, MAAm, and N-MeAAm units resulted in an increase in micelle aggregation numbers. The resulting bottlebrushes formed uni- or bimolecular micelles at extremely low concentrations. These micelles possess a high capacity for loading pyrene, making them a promising choice for targeted drug delivery.

The Solution Properties of Polymethacrylate Molecular Brushes with Oligo(ethylene glycol) and Oligo(propylene glycol) Side Chains

The properties of polymer brushes based on three macromonomers were investigated in aqueous and organic solutions. Methacrylic monomers with different compositions of the oligo(oxyalkylene) substituents and arrangements of the oligo(ethylene glycol) and oligo(propylene glycol) blocks were used for the synthesis of polymers. There were methoxy [oligo(ethylene glycol)_10.3-block-oligo(propylene glycol)_4.7] methacrylate, methoxy [oligo(propylene glycol)_8.3-block-oligo(ethylene glycol)_6.6] methacrylate, and methoxy oligo(propylene glycol)_4.2 methacrylate. Molecular brushes were investigated by the methods of molecular hydrodynamics and optics in dilute solutions in acetonitrile, chloroform, and water. The peculiarities of behavior of poly[oligo(oxyalkylene) methacrylates] in aqueous solutions and water-toluene systems have been found; in particular, the solubility of the polymers in water and organic solvents, the polymers equilibrium distribution between the phases, and the surface activity in the water-toluene system have been established. The thermo-responsibility in aqueous solutions and values of a critical concentration of micelle formation were shown. Depending on the arrangement of blocks in the side chains of molecular brushes, they are characterized by different intramolecular density.

Antioxidant Activity of New Copolymer Conjugates of Methoxyoligo(Ethylene Glycol)Methacrylate and Betulin Methacrylate with Cerium Oxide Nanoparticles In Vitro

The synthesis of two new copolymer conjugates of methoxyoligo(ethylene glycol)methacrylate MPEGMA and betulin methacrylate BM was developed via RAFT polymerization. The molar content of BM units was equal to 9–10 and 13–16 mol%, respectively (HPLC, ¹H and ¹³C NMR); molar weights were equal to 75000–115000. CeO₂ NPs as a component of the hybrid material were synthesized for the preparation of the composition with copolymer conjugates of MPEGMA and BM. We showed a significant increase in G6PDH and GR activities by 21–51% and 9–132%, respectively, which was due to the increase in NADPH concentration under the action of copolymers in vitro. The actions of copolymers and CeO₂ NPs combination were stronger than those of the individual components: the SOD activity increased by more than 30%, the catalase activity increased dose-dependently from 13 to 45%, and the GR activity increased to 49%. The maximum increase in enzyme activity was observed for the G6PDH from 54% to 151%. The MDA level dose-dependently increased by 3–15% under the action of copolymers compared with the control, and dose-dependently decreased by 3–12% in samples containing CeO₂ NPs only. CeO₂ NP–copolymer compositions can be used for the design of new biomimetic medical products with controlled antioxidant properties.

Recent advances in the self-assembly of sparsely grafted amphiphilic copolymers in aqueous solution

This review describes the self-assembly of sparsely grafted amphiphilic copolymers and highlights the effects of structural factors and solvents on their self-assembly behaviour.

Random and Diblock Thermoresponsive Oligo(ethylene glycol)-Based Copolymers Synthesized via Photo-Induced RAFT Polymerization

Amphiphilic random and diblock thermoresponsive oligo(ethylene glycol)-based (co)polymers were synthesized via photoiniferter polymerization under visible light using trithiocarbonate as a chain transfer agent. The effect of solvent, light intensity and wavelength on the rate of the process was investigated. It was shown that blue and green LED light could initiate RAFT polymerization of macromonomers without an exogenous initiator at room temperature, giving bottlebrush polymers with low dispersity at sufficiently high conversions achieved in 1-2 h. The pseudo-living mechanism of polymerization and high chain-end fidelity were confirmed by successful chain extension. Thermoresponsive properties of the copolymers in aqueous solutions were studied via turbidimetry and laser light scattering. Random copolymers of methoxy- and alkoxy oligo(ethylene glycol) methacrylates of a specified length formed unimolecular micelles in water with a hydrophobic core consisting of a polymer backbone and alkyl groups and a hydrophilic oligo(ethylene glycol) shell. In contrast, the diblock copolymer formed huge multimolecular micelles.

Conformation, Self-Organization and Thermoresponsibility of Polymethacrylate Molecular Brushes with Oligo(ethylene glycol)-block-oligo(propylene glycol) Side Chains

Polymethacrylic molecular brushes with oligo(ethylene glycol)-block-oligo(propylene glycol) side chains were investigated by static and dynamic light scattering and viscometry. The solvents used were acetonitrile, tetrahydrofuran, chloroform, and water. The grafted copolymers were molecularly dispersed and dissolved in tetrahydrofuran and acetonitrile. In these solvents, the molar masses of copolymers were determined. In thermodynamically good solvents, namely tetrahydrofuran and acetonitrile, investigated copolymers have a high intramolecular density and the shape of their molecules resembles a star-shaped macromolecule. In chloroform and water, the micelle-like aggregates were formed. Critical micelle concentrations decreased with the lengthening of the hydrophobic block. Molecular brushes demonstrated thermosensitive behavior in aqueous solutions. The phase separation temperatures reduced with an increase in the content of the oligo(propylene glycol) block.

Amphiphilic random and random block terpolymers with PEG, octadecyl, and oleyl pendants for controlled crystallization and microphase separation

Amphiphilic random and random block terpolymers bearing PEG chains, crystalline octadecyl groups, and amorphous oleyl groups were designed to control crystallization and microphase separation in the solid state.

Design guide of amphiphilic crystalline random copolymers for sub-10 nm microphase separation

Sub-10 nm lamellar structures are efficiently constructed by the pendant microphase separation of amphiphilic crystalline random copolymers with broad molecular weight distribution that are obtained from free radical copolymerization.

Assessing the pharmacokinetics and toxicology of polymeric micelle conjugated therapeutics

Introduction: Analogous to nanocarriers such as nanoparticles, liposomes, nano lipoidal carriers, niosomes, and ethosomes, polymeric micelles have gained significance in the field of drug delivery. They have attracted scientists worldwide by their nanometric size, wide range of polymers available for building block synthesis, stability and potential to enhance the targeting and safety of drugs. Incorporation of drugs within the interior of polymeric micelles alters the drug pharmacokinetics, which generally results in increased efficiency.Areas covered: This review deals with the pharmacokinetics of various anti-neoplastic drugs loaded into micelles. The structure of polymeric micelles, polymers employed in their development and techniques involved will be discussed. This is followed by discussion on the pharmacokinetics of anti-cancer drugs loaded into polymeric micelles and the toxicity concerns associated.Expert opinion: Polymeric micelles are nanometeric carriers, with higher stability, polymeric flexibility and higher drug loading of poorly water-soluble drugs. These nanosystems help in increasing the bioavailability of drugs by encapsulating them within the hydrophobic core. The proper selection and design of the amphiphilic polymer for micelles is a crucial step as it decides the toxicity and the biocompatibility.

The Effect of Poly(ethylene glycol) (PEG) Length on the Wettability and Surface Chemistry of PEG-Fluoroalkyl-Modified Polystyrene Diblock Copolymers and Their Two-Layer Films with Elastomer Matrix

Diblock copolymers composed of a polystyrene first block and a PEG-fluoroalkyl chain-modified polystyrene second block were synthesized by controlled atom transfer radical polymerization (ATRP), starting from the same polystyrene macroinitiator. The wettability of the polymer film surfaces was investigated by measurements of static and dynamic contact angles. An increase in advancing water contact angle was evident for all the films after immersion in water for short times (10 and 1000 s), consistent with an unusual contraphilic switch of the PEG-fluoroalkyl side chains. Such a contraphilic response also accounted for the retained wettability of the polymer films upon prolonged contact with water, without an anticipated increase in the hydrophilic character. The copolymers were then used as surface-active modifiers of elastomer poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS)-based two-layer films. The elastomeric behavior of the films was varied by using SEBS matrices with different amounts of polystyrene. Whereas the mechanical properties strictly resembled those of the nature of the SEBS matrix, the surface properties were imposed by the additive. The contraphilic switch of the PEG-fluoroalkyl side chains resulted in an exceptionally high enrichment in fluorine of the film surface after immersion in water for seven days.

Folded amphiphilic homopolymer micelles in water: uniform self-assembly beyond amphiphilic random copolymers

Herein, we developed precision self-assembly systems of amphiphilic homopolymers into folded micelles in water.