Theoretical insights into dopamine photochemistry adsorbed on graphene-type nanostructures

The equilibrium geometry structures and light absorption properties of the dopamine (DA) and dopamine-o-quinone (DAQ) adsorbed on the graphene surface have been investigated using the ground state and linear-response time-dependent density functional theories. Two types of graphene systems were considered, a rectangular form of hexagonal lattice with optimized C-C bond length as the model system for graphene nanoparticles (GrNP) and a similar system but with fixed C-C bond length (1.42 Å) as the model system for graphene 2D sheet (GrS). The analysis of the vertical excitations showed that three types of electronic transitions are possible, namely, localized on graphene, localized on the DA or DAQ, and charge transfer (CT). In the case of the graphene-DA complex, the charge transfer excitations were characterized by the molecule-to-surface (MSCT) character, whereas the graphene-DAQ was characterized by the reverse, i.e. surface-to-molecule (SMCT). The difference between the two cases is given by the presence of an energetically low-lying unoccupied orbital (LUMO+1) that allows charge transfer from the surface to the molecule in the case of DAQ. However, it was also shown that the fingerprints of excited electronic states associated with the adsorbed molecules cannot be seen in the spectrum, as they are mostly suppressed by the characteristic spectral shape of graphene.

Melanin/melanin-like nanoparticles: As a naturally active platform for imaging-guided disease therapy

The development of biocompatible and efficient nanoplatforms that combine diagnostic and therapeutic functions is of great importance for precise disease treatment. Melanin, an endogenous biopolymer present in living organisms, has attracted increasing attention as a versatile bioinspired functional platform owing to its unique physicochemical properties (e.g., high biocompatibility, strong chelation of metal ions, broadband light absorption, high drug binding properties) and inherent antioxidant, photoprotective, anti-inflammatory, and anti-tumor effects. In this review, the fundamental physicochemical properties and preparation methods of natural melanin and melanin-like nanoparticles were outlined. A systematical description of the recent progress of melanin and melanin-like nanoparticles in single, dual-, and tri-multimodal imaging-guided the visual administration and treatment of osteoarthritis, acute liver injury, acute kidney injury, acute lung injury, brain injury, periodontitis, iron overload, etc. Was then given. Finally, it concluded with a reasoned discussion of current challenges toward clinical translation and future striving directions. Therefore, this comprehensive review provides insight into the current status of melanin and melanin-like nanoparticles research and is expected to optimize the design of novel melanin-based therapeutic platforms and further clinical translation.

Mixed-Solvent-Mediated Strategy for Enhancing Light Absorption of Polydopamine and Adhesion Persistence of Dopamine Solutions

Mussel-inspired polydopamine (PDA) and its derivative materials have exhibited a huge potential as a facile and versatile route to fabricate multifunctional coatings on virtually any substrate surface. However, their performance and applicability are frequently obstructed by limited optical absorption in visible regions of PDA and poor surface adhesion persistence of dopamine solutions. Herein, we report a facile strategy to improve these problems by rationally regulating the dopamine polymerization pathway through mixed-solvent-mediated periodate oxidation of dopamine. The spectral analysis, ultrahigh-performance liquid chromatography coupled with high-resolution mass spectrometry, and density functional theory simulations systematically demonstrate that the mixed-solvent reaction systems can effectively accelerate the periodate-induced formation of cyclized moieties in the PDA microstructure and inhibit their further oxidative cleavage, thus contributing to narrowing the inherent energy band gap of PDA and improving the long-lasting surface deposition performance of aged dopamine solutions. Moreover, the newly constructed cyclized species-rich PDA coatings have excellent surface uniformity and significantly enhanced chemical stability. Benefiting from these fascinating properties, they have been further used for permanent dyeing of natural gray hair with remarkably improved blackening effect and excellent practicability, which exhibited their promising prospect in real-world applications.

Oxidative Polymerization of 3,4-Dihydroxybenzylamine─The Lower Homolog of Dopamine

Polydopamine (PDA) formed by oxidative polymerization of dopamine has attracted wide interest because of its unique properties, in particular its strong adhesion to almost all types of surfaces. 3,4-Dihydroxybenzylamine (DHBA) as the lower homolog of PDA also contains a catechol unit and an amino group and thus can be expected to exhibit a similar adhesion and reaction behavior. In fact, autoxidation of DHBA with air in 2-amino-2-hydroxymethyl-propane-1,3-diol (Tris) buffer gives rise to deeply colored oligomer/polymer products (poly(3,4-dihydroxybenzylamine) (PDHBA)) that strongly adhere to several surfaces. Here, the material is characterized by solid-state NMR spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), electron spin resonance (ESR) spectroscopy, mass spectrometry, and atomic force microscopy (AFM). Reaction pathways were rationalized taking into consideration the analytical results that show similarity to PDA chemistry, but also considering differences, leading to a more complex reaction behavior and thus to new structures not found in PDA.

New insights in polydopamine formation via surface adsorption

Polydopamine is a biomimetic self-adherent polymer, which can be easily deposited on a wide variety of materials. Despite the rapidly increasing interest in polydopamine-based coatings, the polymerization mechanism and the key intermediate species formed during the deposition process are still controversial. Herein, we report a systematic investigation of polydopamine formation on halloysite nanotubes; the negative charge and high surface area of halloysite nanotubes favour the capture of intermediates that are involved in polydopamine formation and decelerate the kinetics of the process, to unravel the various polymerization steps. Data from X-ray photoelectron and solid-state nuclear magnetic resonance spectroscopies demonstrate that in the initial stage of polydopamine deposition, oxidative coupling reaction of the dopaminechrome molecules is the main reaction pathway that leads to formation of polycatecholamine oligomers as an intermediate and the post cyclization of the linear oligomers occurs subsequently. Furthermore, TRIS molecules are incorporated into the initially formed oligomers.

Surface-facilitated formation of polydopamine and its implications in melanogenesis

This manuscript examines influences of differently functionalized surfaces on the formation of solution-dispersed polydopamine (pDA). Glass vials functionalized with different functional groups provided a set of conditions with which the relationship between the area of active surface and the rate of pDA formation could be systematically studied. The results suggest that charged and polar surfaces accelerate pDA formation in solution, with the effect of -NH₂ surfaces being exceptionally strong. In the vials, pDA formed as both forms of dispersions in solution and films at solid-liquid interface. Further analyses confirmed that both forms of pDA formed with -NH₂ surfaces were chemically similar to conventional pDA synthesized without help of functional surfaces. Among short peptide-based amyloid fibers with defined surface functional groups, and those displaying lysines (-NH₂) greatly accelerated the formation of pDA, consistent with the results of -NH₂-functionalized vials. The results suggest that pDA formation may be facilitated by surface functional groups of solid-liquid interfaces, and have implications for the overlooked roles of amyloid fibers in biological melanogenesis.

Molecular Dynamics Simulations of Polydopamine Nanosphere's Structure Based on Experimental Evidence

In this work, we show how to obtain internal monodispersed gold nanoparticles inside polydopamine (PDA) nanospheres that are also externally decorated with gold. The number of internal nanoparticles is affected by the size of the PDA nanosphere used, and the lower limit in the number of gold nanoparticles in the center of decorated nanospheres, one single gold nanoparticle, has been reached. In addition, extensive molecular dynamics simulations of PDA nanospheres based on four different chemical motifs, in the presence of water and with different sizes, have been performed to gain insight into the arrangements capable of accommodating cavities. In particular, PDA nanospheres based on pyranoacridinotrione (PYR) units provide good agreement with the experimental attainment of internal metal nanoparticles. In these, the stacking of PYR units leads to a particular morphology, with large portions of space occupied by the solvent, that would explain the observed formation of gold nanoparticles inside the PDA nanosphere.

Atomic force and infrared spectroscopic studies on the role of surface charge for the anti-biofouling properties of polydopamine films

Antibacterial polymer materials have gained interest due to their capability to inhibit or eradicate biofilms with greater efficiency in comparison with their monomeric counterparts. Among the antimicrobial and anti-biofouling polymers, catecholamine-based polymers - and in particular polydopamine - have been studied due to their favorable adhesion properties, which can be tuned by controlling the pH value. In this study, we used atomic force microscopy (AFM)-based spectroscopy to investigate the relation between the adhesion properties and surface charge density and the pH of electrochemically deposited polydopamine films presenting a dissociation constant of polydopamine of 6.3 ± 0.2 and a point of zero charge of 5.37 ± 0.06. Furthermore, using AFM and attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), the influence of the surface charge density of polydopamine on bacterial adhesion and biofilm formation was investigated. It was shown that the adhesion of Escherichia coli at positively charged polydopamine is three times higher compared to a negatively charged polymer, and that the formation of biofilms is favored at positively charged polymers.

Polydopamine Copolymers for Stable Drug Nanoprecipitation

Polydopamine (PDA), a biomaterial inspired by marine mussels, has attracted interest in cancer nanomedicine due to its photothermal properties, nanoparticle coating, and pi-pi stacking-based drug encapsulation abilities. Despite numerous one-pot and post-polymerization modifications, PDA copolymers have not been sufficiently studied in the context of stabilizing hydrophobic drugs in the process of nanoprecipitation. In this study, we tested combinatorial panels of comonomers with PDA to optimize drug loading efficiency, particle size and stability of nano formulations made via drug nanoprecipitation. As a selection criterion for optimal comonomers, we used drug aggregation-induced emission (AIE). We identified 1,1,2-Trimethyl-3-(4-sulfobutyl)benz[e]indolium (In820) as a novel and highly useful comonomer for catecholamines and optimized the conditions for its incorporation into PDA copolymers used for drug nanoprecipitation. Surprisingly, it was superior to polyethylene glycol modifications in every aspect. The leading copolymer, poly(dopamine)-poly(L-dopa)-co-In820 (PDA-PDO-In820 1:1:1), was shown to be a good stabilizer for several hydrophobic drugs. The resulting nanoparticles showed stability for up to 15 days, high encapsulation efficiency of at least 80%, low toxicity, and high antitumor efficacy in vitro. Nanoprecipitation of hydrophobic drugs can be greatly enhanced by the use of PDA copolymers containing In820, which are easy-to-prepare and highly effective stabilizers.

Synthesis of soluble melanin nanoparticles under acidic conditions using Burkholderia cepacia tyrosinase and their characterization

Melanin nanoparticles (MNPs) used for biomedical applications are often synthesized via the chemical auto-oxidation of catecholic monomers such as dopamine and 3,4-dihydroxyphenylalanine (DOPA) under alkaline conditions. However, the synthetic method for the chemical synthesis of MNP (cMNP) is relatively straightforward and more robust to control their homogenous particle size and morphology than the corresponding enzymatic synthetic methods. In this study, we demonstrated that the simple enzymatic synthesis of MNPs (eMNPs) with homogenous and soluble (<20 nm diameter) properties is possible using dopamine and Burkholderia cepacia tyrosinase (BcTy) under acidic conditions (i.e., pH 3.0). BcTy was highly reactive under pH 5.0, where the natural and chemical oxidation of catechol is complex, and thus melanin was synthesized via the hydroxylation of phenolic substrates. The detailed chemical analysis and characterization of the physical properties of the eMNPs confirmed the higher preservation of the catechol and primary amine moieties in the monomer substrate such as dopamine under acidic conditions. The eMNPs showed enhanced antioxidant activity and conferred stickiness to the formed hydrogel compared to the chemical auto-oxidation method owing to the large number of hydroxyl groups remaining such as catechol and quinone moieties. Because of these advantages and characteristics, the synthesis of MNPs using BcTy under acidic conditions can open a new path for their biomedical applications.

Melanin nanoparticles (MNPs) used for biomedical applications are often synthesized via the chemical auto-oxidation of catecholic monomers such as dopamine and 3,4-dihydroxyphenylalanine (DOPA) under alkaline conditions.

Tunable Properties of Polydopamine Nanoparticles and Coated Surfaces

Polydopamine (PDA) nanoparticles and PDA-coated surfaces have wide applications due to PDA's unique reactivity and efficient coating ability on nearly any surface. However, challenges in manipulating and controlling dopamine polymerization and thus the PDA nanoparticle formations and surface coatings still exist. Here, dopamine with a tetraborate (borax)-protected catechol group was utilized to tune the properties of PDA nanoparticles and PDA coatings. This method allows us to (1) synthesize PDA nanoparticles with a narrow size distribution and low aggregation and (2) create surface coating with the desired PDA layer thickness and varying water contact angles. PDA nanoparticles and PDA-coated surfaces of varying but tunable chemical and physical properties will find wide applications. For example, such PDA-coated surfaces were successfully used to construct Ag nanoparticle patterned surfaces with varying Ag particle sizes and densities.

Replacing amine by azide: Dopamine azide polymerization triggered by sodium periodate

Polydopamine (PDA) have been widely described for a range of biomedical and surface engineering applications. However the structure of PDA remains elusive due to the insoluble nature of the polymer....

Expanding the spectrum of polydopamine antioxidant activity by nitroxide conjugation

Polydopamine (PDA) materials are important due to their unique physicochemical properties and their potential as chemopreventive agents for diseases connected with oxidative stress. Although PDA has been suggested to display antioxidant activity, its efficacy is controversial and its mechanism of action is still unclear. Herein, we report that accurately purified PDA nanoparticles in water at pH 7.4 are unable to quench alkylperoxyls (ROO˙), which are the radicals responsible for the propagation of lipid peroxidation, despite PDA reacting with the model DPPH˙ and ABTS˙⁺ radicals. PDA nanoparticles prepared by copolymerization of dopamine with the dialkyl nitroxide 4-NH₂TEMPO show instead good antioxidant activity, thanks to the ROO˙ trapping ability of the nitroxide. Theoretical calculations performed on a quinone-catechol dimer, reproducing the structural motive of PDA, indicate a reactivity with ROO˙ similar to catechol. These results suggest that PDA nanoparticles have an "onion-like" structure, with a catechol-rich core, which can be reached only by DPPH˙ and ABTS˙⁺, and a surface mainly represented by quinones. The importance of assessing the antioxidant activity by inhibited autoxidation studies is also discussed.

The Photophysics and Photochemistry of Melanin- Like Nanomaterials Depend on Morphology and Structure

Melanin‐like nanomaterials have found application in a large variety of high economic and social impact fields as medicine, energy conversion and storage, photothermal catalysis and environmental remediation. These materials have been used mostly for their optical and electronic properties, but also for their high biocompatibility and simplicity and versatility of preparation. Beside this, their chemistry is complex and it yields structures with different molecular weight and composition ranging from oligomers, to polymers as well as nanoparticles (NP). The comprehension of the correlation of the different compositions and morphologies to the optical properties of melanin is still incomplete and challenging, even if it is fundamental also from a technological point of view. In this minireview we focus on scientific papers, mostly recent ones, that indeed examine the link between composition and structural feature and photophysical and photochemical properties proposing this approach as a general one for future research.

Evaluation of 2-Bromoisobutyryl Catechol Derivatives for Atom Transfer Radical Polymerization-Functionalized Polydopamine Coatings

The use of α-bromoisobutyryl-functionalized polydopamine (PDA), derived from an in situ mixture with dopamine (DA) and α-bromoisobutyryl bromide, enables surface-initiated atom transfer radical polymerization (SI-ATRP) of a broad range of methacrylate monomers for surface functionalization. Although the putative intermediate 2-bromo-N-(3,4-dihydroxyphenethyl)-2-methylpropanamide 1 has been proposed to account for the SI-ATRP activity of α-bromoisobutyryl-functionalized PDA, there has not been a systematic investigation on the efficacy of other catechol-derived 2-bromoisobutyryl derivatives for SI-ATRP. In this work, a number of catechol-derived ATRP initiators containing the 2-bromoisobutyryl moiety were designed and synthesized, in an effort to investigate the effect of changes in structure on initiator immobilization, and subsequent ATRP performance. The change in the length of the linker unit bearing the 2-bromoisobutyryl moiety, the introduction of a free amine group, or the replacement of the amide with an ester were found to have profound effects on the ability of the molecule to deposit ATRP-initiator-modified PDA coatings, as well as the subsequent SI-ATRP performance. Among the ATRP initiators synthesized, 5-(2-aminoethyl)-2,3-dihydroxyphenethyl 2-bromo-2-methylpropanoate hydrobromide 4·HBr was most efficiently incorporated into ATRP-initiator-modified PDA coatings and also the best at effecting SI-ATRP with 2-hydroxyethyl methacrylate; the high performance of this initiator is likely due to the presence of a free amine and an appropriately long methylene linker unit to the 2-bromoisobutyryl moiety. This methodology was found to be suitable for the functionalization of a range of organic and inorganic surfaces, for the fabrication of high-value surface-grafted polymer brush coatings for various applications.

Developing photothermal-responsive and anti-oxidative silk/dopamine nanoparticles decorated with drugs which were incorporated into silk films as a depot-based drug delivery

Photothermal-responsive (PTR) and anti-oxidative silk fibroin/dopamine nanoparticles (SD NPs) mediated by tyrosinase were produced, and decorated either by curcumin or albumin (BSA) to produce SD/curcumin or SD/BSA NPs as drug delivery vehicles, respectively. Both drug loaded NPs were further blended into SF solutions to produce SD films, as a depot-based drug delivery. The reaction mechanisms for producing new SD NPs were proposed. Anti-oxidative activities for SD NPs were examined by H₂O₂ scavenge capacities of NPs. NPs were not cytotoxic at concentration of 1000μg/mL. Moreover, heparin was coated to SD films to produce SDH films for temporary implants. Cumulative release profiles for drugs loaded SDH films showed fast releases and then sustained releases stages. Furthermore, the releases of curcumin in sustained stages for varying SD/curcumin NPs loaded into SDH films were dependent on amounts of NPs. BSA releases profiles for SD/BSA NPs loaded into SDH films were similar to those profiles for the films carried with SD/curcumin NPs but release periods of BSA were short. Degrees of PTR effects with irradiation of near infrared on the releases of two drugs loaded films were different. Blood clot at wound areas of rats with SDH films implantations was not found for 24 h study.

Polydopamine Films with 2D-like Layered Structure and High Mechanical Resilience

Highly oriented, layered, and mechanically resilient films of polydopamine (PDA) have been synthesized from the air/water interface. The films show a unique layered structure, as shown by scanning and transmission electron studies (SEM/TEM) and X-ray diffraction analysis (XRD), which resemble that of 2D layered materials. The films exhibit a composition typical of PDA-based materials, as evidenced by X-ray photoelectron spectroscopy (XPS); moreover, the samples present the distinctive resonance modes of PDA-based nanomaterials in Raman and infrared spectroscopy (FTIR) experiments. The presence of highly ordinated 3-4 protomolecule stacking, taking place at the air/water interface, with a unique eumelanin-like supramolecular arrangement is presented. Moreover, the films show superior mechanical resilience with E = 13 ± 4 GPa and H = 0.21 ± 0.03 GPa, as revealed by nanoindentation experiments, making them highly resilient and easily transferable. Finally, the ordering induced by the interface opens many possibilities for further studies, including those regarding the supramolecular structure on PDA due to their similarity to 2D layered materials.

Advances in base editing with an emphasis on an AAV-based strategy

The Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-based base editors have been developed for precisely installing point mutations in genomes with high efficiency. Two editing systems of cytosine base editors (CBEs) and adenine base editors (ABEs) have been developed for conversion of C.G-to-T.A and A.T-to-G.C, respectively, showing the prominence in genomic DNA correction and mutation. Here, we summarize recent optimized approaches in improving base editors, including the evolution of Cas proteins, the choice of deamination enzymes, modification on linker length, base-editor expression, and addition of functional domains. Specifically, in this paper we highlight a strategy of split-intein mediated base-editor reconstitution for its adeno-associated virus (AAV) delivery. The purpose of this article is to offer readers with a better understanding of AAV-mediated base editors, and facilitate them to use this tool in in vivo experiments and potential clinical applications.

Smart nano-micro platforms for ophthalmological applications: The state-of-the-art and future perspectives

Smart nano-micro platforms have been extensively applied for diverse biomedical applications, mostly focusing on cancer therapy. In comparison with conventional nanotechnology, the smart nano-micro matrix can exhibit specific response to exogenous or endogenous triggers, and thus can achieve multiple functions e.g. site-specific drug delivery, bio-imaging and detection of bio-molecules. These intriguing techniques have expanded into ophthalmology in recent years, yet few works have been summarized in this field. In this work, we provide the state-of-the-art of diverse nano-micro platforms based on both the conventional materials (e.g. natural or synthetic polymers, lipid nanomaterials, metal and metal oxide nanoparticles) and emerging nanomaterials (e.g. up-conversion nanoparticles, quantum dots and carbon materials) in ophthalmology, with some smart nano/micro platformers highlighted. The common ocular diseases studied in the field of nano-micro systems are firstly introduced, and their therapeutic method and the related drawback in clinic treatment are presented. The recent progress of different materials for diverse ocular applications is then demonstrated, with the representative nano- and micro-systems highlighted in detail. At last, an in-depth discussion on the clinical translation challenges faced in this field and the future direction are provided. This review would allow the researchers to design more smart nanomedicines in a more rational manner for specific ophthalmology applications.

Parametrizing the Spatial Dependence of 1H NMR Chemical Shifts in π-Stacked Molecular Fragments

Most recently a renewed interest in several areas has arisen in factors governing the 1H NMR chemical shift (1H CS) of protons in aromatic systems. Therefore, it is important to describe how 1H CS values are affected by π-stacking intermolecular interactions. The parametrization of radial and angular dependences of the 1H CS is proposed, which is based on conventional gauge-independent atomic orbital (GIAO) calculations of explicit molecular fragments. Such a parametrization is exemplified for a benzene dimer with intermonomer vertical and horizontal distances which are in the range of values often found in crystals of organic compounds. Results obtained by the GIAO calculations combined with B3LYP and MP2 methods were compared, and revealed qualitatively the same trends in the 1H CS data. The parametrization was found to be quantitatively correct for the T-shaped benzene dimers, and its limitations were discussed. Parametrized 1H CS surfaces should become useful for providing additional restraints in the search of site-specific information through an analysis of structurally induced 1H CS changes.

Laser-induced graphitization of polydopamine leads to enhanced mechanical performance while preserving multifunctionality

Polydopamine (PDA) is a simple and versatile conformal coating material that has been proposed for a variety of uses; however in practice its performance is often hindered by poor mechanical properties and high roughness. Here, we show that blue-diode laser annealing dramatically improves mechanical performance and reduces roughness of PDA coatings. Laser-annealed PDA (LAPDA) was shown to be >100-fold more scratch resistant than pristine PDA and even better than hard inorganic substrates, which we attribute to partial graphitization and covalent coupling between PDA subunits during annealing. Moreover, laser annealing provides these benefits while preserving other attractive properties of PDA, as demonstrated by the superior biofouling resistance of antifouling polymer-grafted LAPDA compared to PDA modified with the same polymer. Our work suggests that laser annealing may allow the use of PDA in mechanically demanding applications previously considered inaccessible, without sacrificing the functional versatility that is so characteristic of PDA.