Microwave-Assisted Hydrothermal Synthesis of {100} and {111} Faceted LiFeO2 Truncated Octahedra: Investigations on Volatile Organic Compound Sensing Performance

Growth of exposed crystal facets has received considerable attention because of their coordinatively unsaturated surface atoms and defect-related surface reactivities. Herein, LiFeO2 truncated octahedra exposed with 6 {100} facets and 8 {111} facets were prepared through a simple microwave-assisted hydrothermal method without using any additives, surfactants, and calcination processes. The detailed growth process revealed that the formation of LiFeO2 truncated octahedra occurred only at the optimized reaction temperature (180 °C), time (30 min), and reactant concentrations. The prepared LiFeO2 truncated octahedra showed excellent sensing responses toward aliphatic organic compounds compared to that against aromatic organic compounds and poor response to inorganic compounds. The response percentages of 150 ppm concentrations of acetone, ethanol, formaldehyde, and isopropyl alcohol are 81.84, 62.91, 62.68, and 69.41%, respectively, at a low operating temperature (100 °C). The presence of exposed facets with their coordinatively unsaturated Li/Fe surface atoms such as 5-fold {100}, 3-fold {111}, 3-fold {100}-{111}, 2-fold {111}-{111}, and 2-fold coordination with the O atom in the vertices facilitated more oxygen vacancies and led to improved surface reactivities as well as sensitivity.

Ce1-xZrxO2 nanoparticles in bacterial cellulose, bio-based composites with self-regenerating antioxidant capabilities

Bacterial cellulose (BC) is an emerging biopolymer with ever-widening uses in the biomedical field due to its purity, mechanical stability, conformability, moisture control, and biocompatibility. In the wet form, its highly porous nanofibrillar structure and abundant surface hydroxyl groups enable the functionalisation of BC with inorganic nanoparticles (NPs), granting the material additional purposive capabilities. As oxidative stress caused by reactive oxygen species (ROS) negatively affects various cellular structures, the functionalisation of BC with CeO2 NPs, known antioxidants, is pursued in this work to achieve composites capable of minimising inflammation and tissue damage. We report on low-temperature in situ syntheses of CeO2 NPs in BC enabling the formation of BC-CeO2 composites that exhibit self-regenerating antioxidant properties, as verified by 2,2-diphenyl-1-picrylhydrazyl (DPPH) assays and studies of the evolution in the CeO2 absorption edge (indicative of the Ce3+ and Ce4+ fractions). X-Ray photoelectron spectroscopy (XPS) further reveals that incorporation of zirconium into the CeO2 lattice leads to a four-fold increase in the Ce3+: Ce4+ ratio, thereby enhancing the composite antioxidant performance as exemplified by BC-Ce0.6Zr0.4O2 recording the highest %DPPH scavenging per unit mass of NPs among the BC-Ce1-xZrxO2 studied systems.

Synthesis of Hierarchical Layered Quasi-Triangular Ce(OH)CO3 and Its Thermal Conversion to Ceria with High Polishing Performance

Layered quasi-triangular Ce(OH)CO₃ assembled from primary nanoparticles was synthesized via a solvothermal method and converted into CeO₂ abrasive particles by calcination at 800-1000 °C. With the increase of calcination temperature, the primary particle size increased and the microstructure, mechanical hardness, and chemical activity of the CeO₂ particles changed, thus affecting the polishing performance. The calcined products obtained at 800, 850, and 900 °C maintained the layered edge structure of the Ce(OH)CO₃ precursor and had a relatively high specific surface area and surface Ce³⁺ concentration. The samples calcined at 950 and 1000 °C lost the layered structure due to the large-scale melting of the primary particles, and their surface chemical activity decreased. The polishing experiments on K9 glass showed that, with the calcination temperature rising from 800 to 1000 °C, the material removal rate (MRR) first increased and then decreased sharply. The initial increase of MRR was attributed to the increase of mechanical hardness of the layered quasi-triangular CeO₂, and the subsequent decrease of MRR was related to the decrease in surface chemical activity and disappearance of the layered edge structure. The product calcined at 900 °C had the highest MRR and best surface quality after polishing due to the layered edge structure and optimal match of chemical activity and mechanical hardness.

Oxygen vacancy enriched Cu-WO3 hierarchical structures for the thermal decomposition of ammonium perchlorate

Cu-WO3 hierarchical structures are rapidly prepared and they exhibit excellent catalytic activity in AP decomposition due to their rich oxygen vacancies and Lewis acid sites.

In situ synthesis of oxidized MXene-based metal cobalt spinel nanocomposites for an excellent promotion in thermal decomposition of ammonium perchlorate

Oxidized MXene-supported MCo2O4 (oxidized MXene/MCo2O4, M = Mn, Zn, Cu and Co) nanocomposites with an excellent catalytic performance for AP decomposition were successfully synthesized through a facile hydrothermal assisted calcination method.

Protection of highly active sites on Cu2O nanocages: an efficient crystalline catalyst for ammonium perchlorate decomposition

A simple strategy to fabricate crystalline catalysts exposing highly active sites was demonstrated.